Ticket #197: acp_apic.log

File acp_apic.log, 11.2 kB (added by guest, 9 months ago)
Line 
1AllocIRQMem at 0xFFE88000 (24576 bytes)
2
3PSD_install options:" /R /APIC /SMP " @#netlabs dot org:3.6a#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Feb 13 2008 12:27:51
4MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
5New Stack = FFD00000 Size:0x8000
6PSD_INIT ESP=0xFFCFFFE0
7AcpiOsInitialize ALLOC size 65536 at 0xF96C0000
8AcpiOsInitialize MapMem size 4096 at 0xFFE9E000
9AcpiOsCreateLock 8
10AcpiOsCreateLock 0
11AcpiOsPredefinedOverride: "_REV"
12AcpiOsPredefinedOverride: "_OS_"
13AcpiOsPredefinedOverride: override to eComStation
14AcpiOsPredefinedOverride: "_GL_"
15AcpiOsCreateSemaphore: O.K. Handle=0xF96C03F8 M:1 I:0
16AcpiOsPredefinedOverride: "_OSI"
17AcpiOsPredefinedOverride: override to eCS
18*** AcpiInitializeSubsystem Status = 0 ***
19ACPI: RSDP @ 0xFDFE0/0x14 (v0 IBM   )
20ACPI: RSDT @ 0x3FFF6640/0x2C (v1 IBM    CDTPWSPL 0x1010 IBM  0x0)
21ACPI: FACP @ 0x3FFF65C0/0x74 (v1 IBM    CDTPWSPL 0x1010 IBM  0x0)
22ACPI: DSDT @ 0x3FFF29C0/0x3726 (v1 IBM    CDTPWSPL 0x1000 MSFT 0x1000007)
23ACPI: FACS @ 0x3FFFE680/0x40
24ACPI: APIC @ 0x3FFF6540/0x62 (v1 IBM    CDTPWSPL 0x1010 IBM  0x0)
25*** AcpiInitializeTables Status = 0 ***
26AcpiOsTableOverride Ex:FFE819C0 New:FFCFFFAC SIG:[DSDT]
27tbxface-619 [2] TbLoadNamespace: ACPI Tables successfully acquired
28*** AcpiLoadTables Status = 0 ***
29Table [DSDT]
30Table [FACS]
31Table [FACP]
32Table [APIC]
33Local APIC address: FEE00000h
34System also has 8259
35APIC_PROCESSOR: ProcID 0h LocalApicID 1h - usable
36APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable
37APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
38APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
39APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
40APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
41Size of FACDT 244
42Type of computer - Unspecified
43System vector the SCI interrupt is wired to in 8259 mode. 9
44System port address of the SMI Command Port 0xB2
45The value to write to SMI_CMD to disable SMI   0xF0
46The value to write to SMI_CMD to re-enable SMI 0xF1
47The value to write to SMI_CMD to enter the S4BIOS state 0x0
48System port address of the PM1a Event Register Block F800
49System port address of the PM1b Event Register Block 0
50Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
51System port address of the PM1a Control Register Block F804
52System port address of the PM1b Control Register Block 0
53Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
54System port address of the PM2 Control Register Block 0
55System port address of the Power Management Timer Control Register Block F808
56Number of bytes decoded by PM_TMR_BLK (=4) 4
57System port address of General-Purpose Event 0 Register Block F828
58System port address of General-Purpose Event 1 Register Block F82C
59Number of bytes decoded by GPE0_BLK 0x4
60Number of bytes decoded by GPE1_BLK 0x4
61Offset within the ACPI general-purpose event model where GPE1 based events start 10
62GPE enable register: 0: 0
63GPE status register: 0: 0
64The system does not support a C2 state. 65
65The system does not support a C3 state 3E9
66The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
67The bit width of the processor's duty cycle setting value in the P_CNT register 3
68The RTC CMOS RAM index to the day-of-month alarm value 13
69IA-PC Boot Architecture Flags 0x0
70Fixed feature flags A5
71The reset register:
72Type of address space - System Memory
73Register Bit Width  0
74Register Bit Offset 0
75Access size 0
76Address 0
77The value to write to the RESET_REG port to reset the system 0
78***** Throttl Width 3 Offset 1
79evxfevnt-176 [2] Enable: Transition to ACPI mode successful
80evgpeblk-1111 [4] EvCreateGpeBlock: GPE 0 to F [_GPE] 2 regs on int 0x9
81evgpeblk-1111 [4] EvCreateGpeBlock: GPE 10 to 1F [_GPE] 2 regs on int 0x9
82AcpiOsInstallIntterrupHandler IRQ9 handler F96FEA2D
83evgpeblk-1211 [3] EvInitializeGpeBlock: Found 2 Wake, Enabled 0 Runtime GPEs in this block
84evgpeblk-1211 [3] EvInitializeGpeBlock: Found 1 Wake, Enabled 0 Runtime GPEs in this block
85************ AcpiEnableSubsystem Status = 0
86AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
87AcpiOsDerivePCIID([PCI0] ,[CFG2],) Bus:0 Dev:31 Fun:2 - Derive: Bus:0 Dev:31 Fun:2
88AcpiOsDerivePCIID([PCI0] ,[CFG2],) Bus:0 Dev:31 Fun:3 - Derive: Bus:0 Dev:31 Fun:3
89AcpiOsDerivePCIID([PCI0] ,[CFG2],) Bus:0 Dev:31 Fun:5 - Derive: Bus:0 Dev:31 Fun:5
90************ Scan EC Status = 0
91Completing Region/Field/Buffer/Package initialization:..............................................................................
92Initialized 10/16 Regions 31/31 Fields 27/27 Buffers 10/14 Packages (424 nodes)
93Initializing Device/Processor/Thermal objects by executing _INI methods:AcpiOsDerivePCIID([PCI0] ,[MCHX],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0
94....
95Executed 4 _INI methods requiring 3 _STA executions (examined 44 objects)
96************ AcpiInitializeObjects mask:0 Status = 0
97Processor [CPU0]
98Processor [CPU1]
99Status 0x0 0
100************ AcpiInstallNotifyHandler System Status = 0
101************ AcpiInstallNotifyHandler Device Status = 0
102
103Init ACPI rc=0
104APIC0 phys FEC00000 lin: FFDEC000 APIC ID 2000000 (170020) Ver 20 MaxIO entry 0x17 (4000000) Arbitration ID 4 set to (2000000) 2 Id  (2000000) 2
105Set 24 lines from IRQ0
106=========== Status set APIC mode 0x0
107Current IRQs line 24
108IRQ0 override to IRQ2 Vector:50 Line:2
109IRQ9 override to IRQ9 Vector:71 Line:9
110WakeupVector Lin: FFDEB000
111WakeupVector Lin: FFDEB000 Phys: 6E000 IPIStack:FFDE3000 s_cpu:0
112GetWakeupVector Status = 0
113PIC Mask:FFFFDFFB
114PSD_GET_NUM_OF_PROCS - has 2 CPU
115ProcInit CPU0
116LApic ID:0x1000000: ver 0x40011
117Max LVT=5
118Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
119Status Evaluate Processor 0x0 AE_OK
120Usable:2 Counter:0
121 CPU id to N:0
122 ProcId:     0x0
123 P_BLK:      0xF810
124 P_BLK len:  0x6
125CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
126End init CPU0 rc:0
127StartProcessor: CPU1 id 1
128StartProcessor: Warm Vector:18000004, BootCode.Lin:0xFFDEB000, BootCode.Phys:0x6E000
129StartProcessor 1 id:1 LAPICid:0
130Wait INI App Proc
131Send SIPI1
132StartProcessor success SIPI1
133ProcInit CPU1
134LApic ID:0x0: ver 0x40011
135Max LVT=5
136End Startup code
137Set HLT duration as IOdelay:0xF9
138Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
139Status Evaluate Processor 0x0 AE_OK
140Usable:2 Counter:1
141 CPU id to N:1
142 ProcId:     0x1
143 P_BLK:      0xF810
144 P_BLK len:  0x6
145CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
146End init CPU1 rc:0
147UNMASK PIC IRQ8 mask 0xFFFFDEFB Real:FFEBB8F4
148OemHlpXHandler: ACPI.CFG opened: Size is 2010 bytes
149OemHlpXHandler: ACPI.CFG read: 2010 bytes
150OemHlpXHandler: ACPI.CFG closed: 0, Buffer at FD3A33EC
151PSDFree: at 0xF9C00000 success!
152Found bridge "PCI0" BBN is absent status:5
153Finding:0 bridges
1540:0.0  Class:600  Hdr:0   Bridge H->0
1550:1.0  Class:604  Hdr:1   Bridge 0->1
1560:30.0  Class:604  Hdr:1   Bridge 0->2
1570:31.0  Class:601  Hdr:80
1580:31.1  Class:101  Hdr:0
1590:31.2  Class:C03  Hdr:0
1600:31.3  Class:C05  Hdr:0
1610:31.5  Class:401  Hdr:0
1621:0.0  Class:300  Hdr:80
1631:0.1  Class:380  Hdr:0
164PCI Bus scan: 3 PCI buses found.
165Scan ACPI tree for PCI functions
1660:0.0  'PCI0' (F96C16B0)
1670:1.0  'AGPC' (F96C1D18)
1680:31.1  'PIDE' (F96C2948)
1690:31.0  'ISA_' (F96C4A78)
1700:31.2  'USB0' (F96C4C90)
1710:31.3  'SMB0' (F96C4EB0)
1720:31.5  'AUD0' (F96C5048)
1730:31.6  'AUD1' (F96C51E0)
1740:30.0  'PCI2' (F96C5378)
175Bridges found:
1760:0.0  class:600  type: 0  Bus H->0  ACPI: 'PCI0' (F96C16B0) _PRT
1770:1.0  class:604  type: 1  Bus 0->1  ACPI: 'AGPC' (F96C1D18) _PRT
1780:30.0  class:604  type: 1  Bus 0->2  ACPI: 'PCI2' (F96C5378) _PRT
179IRQLinks found:
1800: 'PIN1' (F96C1DE8)  P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 1:0.0
181                       A[]
1821: 'PIN2' (F96C20C0)  P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:31.5 0:31.3
183                       A[]
1842: 'PIN3' (F96C2318)  P[]
185                       A[]
1863: 'PIN4' (F96C2570)  P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:31.2
187                       A[]
188PCI devices found:
1890:0.0  8086:1A21  'PCI0'
1900:1.0  8086:1A23  'AGPC'
1910:30.0  8086:2418  'PCI2'
1920:31.0  8086:2410  'ISA_'
1930:31.1  8086:2411  'PIDE'
1940:31.2  8086:2412  'USB0'  IRQs: PCI:10 PIC:'PIN4': R 10 APIC:19 Apic Set: 19
1950:31.3  8086:2413  'SMB0'  IRQs: PCI:9 PIC:'PIN2': R 9 APIC:17 Apic Set: 17
1960:31.5  8086:2415  'AUD0'  IRQs: PCI:9 PIC:'PIN2': R 9 APIC:17 Apic Set: 17
1971:0.0  1002:4966          IRQs: PCI:11 PIC:'PIN1': R 11 APIC:16 Apic Set: 16
1981:0.1  1002:496E       
199Max IRQ number in use - 19
200Bus detected - 2
201UNMASK PIC IRQ9 mask 0xFFFFDCFB Real:FFEBB8F4
202** Create resource, max = 31 **
203OemHlpXHandler: ACPI_START_EVENTS 3
204************ AcpiInstall Power Device Status = 0
205ACPI Error (evxfevnt-288): Could not enable SleepButton event [20080123]
206ACPI Warning (evxface-235): Could not enable fixed event 3 [20080123]
207************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
208************ AcpiInstall PMTimer Device Status = 0
209** Total use:85104 unuse:10216 count:1420 **
210Get GpeHdl Status = 0 - AE_OK
211Event [_L1C]
212Install GPE0x1C  Status 0x0
213EndScan GPE Status 0
214===== Info ========
215Int Level 9
216In Xrupt F96CBD20 in arg F96CBD20
217      Node
218Name [_GPE]
219Flags: 0
220Reg count 2
221GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
222GPE0 Status:F828 Enable:F82A EnableWake:8 EnableRun:0 BaseGPENumber:0
223GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
224GPE1 Status:F829 Enable:F82B EnableWake:8 EnableRun:0 BaseGPENumber:8
225===== Info ========
226Int Level 9
227In Xrupt F96CBD20 in arg F96CBE98
228      Node
229Name [_GPE]
230Flags: 0
231Reg count 2
232GPE0 Status:F82C Enable:F82E EnableWake:0 EnableRun:0 BaseGPENumber:10
233GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
234GPE1 Status:F82D Enable:F82F EnableWake:0 EnableRun:0 BaseGPENumber:18
235=========== Status 0x0 0
236************ Leave Sleep Status = 0x5 - AE_NOT_FOUND
237OemHlpXHandler: ACPI_START_EVENTS 4
238OemHlpXHandler: CallACPI16: 47008DF, CallACPI32: F96D5482, ExportTable32: F9C101CC
239UNMASK PIC IRQ1 mask 0xFFFFDCF9 Real:FFEBB8F4
240IRQMask SetVirtualWireMode
241SetVirtualWireMode Apic 0 PIC 0 PCI:20200 PICMask:DCF9 IRQs:20
242UNMASK APIC IRQ19 mask 0xFFF7DCF9
243APIC MASK IRQ19
244UNMASK PIC IRQ6 mask 0xFFFFDCB9 Real:FFEBB8F4
245FindPCIDevice
246 Need: B:0 D:1F F:1
247UNMASK PIC IRQ14 mask 0xFFFF9CB9 Real:FFEBB8F4
248UNMASK PIC IRQ14 mask 0xFFFF9CB9 Real:FFEBB8F4
249UNMASK PIC IRQ14 mask 0xFFFF9CB9 Real:FFEBB8F4
250UNMASK PIC IRQ14 mask 0xFFFF9CB9 Real:FFEBB8F4
251UNMASK PIC IRQ15 mask 0xFFFF1CB9 Real:FFEBB8F4
252UNMASK PIC IRQ15 mask 0xFFFF1CB9 Real:FFEBB8F4
253UNMASK PIC IRQ15 mask 0xFFFF1CB9 Real:FFEBB8F4
254UNMASK PIC IRQ15 mask 0xFFFF1CB9 Real:FFEBB8F4
255UNMASK PIC IRQ14 mask 0xFFFF1CB9 Real:FFEBB8F4
256UNMASK PIC IRQ15 mask 0xFFFF1CB9 Real:FFEBB8F4
257APM: PSD find success. PSD Ftable:F9C101D0
258Register Notify 1st FFCD71CE
259UNMASK PIC IRQ6 mask 0xFFFF1CB9 Real:FFEBB8F4
260UNMASK PIC IRQ1 mask 0xFFFF1CB9 Real:FFEBB8F4
261UNMASK PIC IRQ12 mask 0xFFFF0CB9 Real:FFEBB8F4
262UNMASK APIC IRQ19 mask 0xFFF70CF9
263OemHlpXHandler: CMD_INIT_COMPLETE
264PSD_SET_ADV_INT_MODE Apic 0 PIC 0
265Dummy 7 IDT FFDBF370 Vector 57
266Dummy 2C IDT FFDBF370 Vector F3
267Dummy 2F IDT FFDBF370 Vector F2
268Dummy 2E IDT FFDBF370 Vector 2E
269UNMASK APIC IRQ0 mask 0xFFF72CFC
270******** Event tread ***************
271APM: Setting suspend state:1
272Button KernBlock 4294967295 timeout
273UNMASK APIC IRQ6 mask 0xFFF72CBC
274APIC MASK IRQ6