Ticket #253: acpica.2.log

AllocIRQMem at 0xFFE88000 (24576 bytes)

PSD_install options:" /SMP /ACPI /TMR /!NOD" @#netlabs dot org:3.9#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Apr 23 2008 03:50:52
MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
New Stack = FFD00000 Size:0x8000
AcpiOsInitialize ALLOC size 65536 at 0xF9700000
AcpiOsInitialize MapMem size 4096 at 0xFFE9D000
AcpiOsCreateLock F9C1733C
AcpiOsCreateLock F9C1CD04
AcpiOsPredefinedOverride: "_REV"
AcpiOsPredefinedOverride: "_OS_"
AcpiOsPredefinedOverride: override to eComStation
AcpiOsPredefinedOverride: "_GL_"
AcpiOsPredefinedOverride: "_OSI"
*** AcpiInitializeSubsystem Status = 0 ***
ACPI: RSDP @ 0xFA860/0x14 (v0 ACPIAM)
ACPI: RSDT @ 0x77FB0000/0x38 (v1 A_M_I  OEMRSDT  0x8000708 MSFT 0x97)
ACPI: FACP @ 0x77FB0200/0x84 (v2 A M I  OEMFACP  0x12000601 MSFT 0x97)
ACPI: DSDT @ 0x77FB0440/0x4BE8 (v1 AM2N6 AM2N6221 0x221 INTL 0x20051117)
ACPI: FACS @ 0x77FC0000/0x40
ACPI: APIC @ 0x77FB0390/0x70 (v1 A_M_I  OEMAPIC  0x8000708 MSFT 0x97)
ACPI: MCFG @ 0x77FB0400/0x3C (v1 A_M_I  OEMMCFG  0x8000708 MSFT 0x97)
ACPI: OEMB @ 0x77FC0040/0x60 (v1 A_M_I  AMI_OEM  0x8000708 MSFT 0x97)
ACPI: SSDT @ 0x77FB5030/0x248 (v1 A M I  POWERNOW 0x1 AMD  0x1)
*** AcpiInitializeTables Status = 0 ***
AcpiOsTableOverride Ex:FFD15440 New:FFCFFFC4 SIG:[DSDT]
*** AcpiLoadTables Status = 0 ***
Table [DSDT]
Table [FACS]
Table [FACP]
Table [APIC]
Local APIC address: FEE00000h
System also has 8259
APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable
APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable
APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
APIC_XRUPT_OVERRIDE: Bus: 0h Source 14 Global SysInt 14 - Polarity active: High 0 Trigger by: Edge
APIC_XRUPT_OVERRIDE: Bus: 0h Source 15 Global SysInt 15 - Polarity active: High 0 Trigger by: Edge
Table [MCFG]
Table [OEMB]
Table [SSDT]
Size of FACDT 244
Type of computer - Unspecified
System vector the SCI interrupt is wired to in 8259 mode. 9
System port address of the SMI Command Port 0x442E
The value to write to SMI_CMD to disable SMI   0xE1
The value to write to SMI_CMD to re-enable SMI 0x1E
The value to write to SMI_CMD to enter the S4BIOS state 0x0
System port address of the PM1a Event Register Block 4000
System port address of the PM1b Event Register Block 0
Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
System port address of the PM1a Control Register Block 4004
System port address of the PM1b Control Register Block 0
Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
System port address of the PM2 Control Register Block 0
System port address of the Power Management Timer Control Register Block 4008
Number of bytes decoded by PM_TMR_BLK (=4) 4
System port address of General-Purpose Event 0 Register Block 4020
System port address of General-Purpose Event 1 Register Block 44A0
Number of bytes decoded by GPE0_BLK 0x8
Number of bytes decoded by GPE1_BLK 0x10
Offset within the ACPI general-purpose event model where GPE1 based events start 20
GPE enable register: 0: 0: 0: 0
GPE status register: 40: 0: 0: 0
The system does not support a C2 state. 65
The system does not support a C3 state 3E9
The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
The RTC CMOS RAM index to the day-of-month alarm value 125
The RTC CMOS RAM index to the month of year alarm value 126
The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
IA-PC Boot Architecture Flags 0x0
Fixed feature flags A5
The reset register:
Type of address space - System I/O
Register Bit Width  8
Register Bit Offset 0
Access size 0
Address 3321
The value to write to the RESET_REG port to reset the system 6
***** Throttl Width 0 Offset 1
AcpiOsInstallIntterrupHandler IRQ9 handler F9731D49
** AcpiEnableSubsystem Status = 0
AcpiOsDerivePCIID([PCI0] ,[LPDC],) Bus:0 Dev:1 Fun:0 - Derive: Bus:0 Dev:1 Fun:0
AcpiOsDerivePCIID([PCI0] ,[PIMC],) Bus:0 Dev:1 Fun:0 - Derive: Bus:0 Dev:1 Fun:0
** Scan EC Status = 0
AcpiOsDerivePCIID([PCI0] ,[JREG],) Bus:0 Dev:0 Fun:65535 - Pci config status=1001
Derive: Bus:2 Dev:0 Fun:65535
ACPI Exception (evregion-529): AE_BAD_PARAMETER, Returned by Handler for [PCI_Config] [20080321]
ACPI Error (psparse-627): Method parse/execution failed [\_SB_.PCI0.BR10.PES1.RSTM] (Node F9708A80), AE_BAD_PARAMETER
ACPI Error (psparse-627): Method parse/execution failed [\_SB_.PCI0.BR10.PES1._INI] (Node F9708948), AE_BAD_PARAMETER
AcpiOsDerivePCIID([PCI0] ,[JREG],) Bus:0 Dev:0 Fun:65535 - Pci config status=1001
Derive: Bus:3 Dev:0 Fun:65535
ACPI Exception (evregion-529): AE_BAD_PARAMETER, Returned by Handler for [PCI_Config] [20080321]
ACPI Error (psparse-627): Method parse/execution failed [\_SB_.PCI0.BR11.PES2.RSTM] (Node F9708F70), AE_BAD_PARAMETER
ACPI Error (psparse-627): Method parse/execution failed [\_SB_.PCI0.BR11.PES2._INI] (Node F9708E38), AE_BAD_PARAMETER
** AcpiInitializeObjects mask:0 Status = 0
Processor [P001]
Processor [P002]
Status 0x0 0
Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
Status Evaluate Processor 0x0 AE_OK
Usable:2 Counter:0 
 CPU id to N:0
 ProcId:     0x1
 P_BLK:      0x4010
 P_BLK len:  0x6
CPU0 Status Evaluate _PCT 0x0 AE_OK
 Perf control:  0x0
 Perf status:  0x0
Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
Status Evaluate Processor 0x0 AE_OK
Usable:2 Counter:1 
 CPU id to N:1
 ProcId:     0x2
 P_BLK:      0x0
 P_BLK len:  0x0
CPU1 Status Evaluate _PCT 0x0 AE_OK
 Perf control:  0x0
 Perf status:  0x0
** AcpiInstall Power Device Status = 0
ACPI Error (evxfevnt-288): Could not enable SleepButton event [20080321]
ACPI Warning (evxface-235): Could not enable fixed event 3 [20080321]
** AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
** AcpiInstall PMTimer Device Status = 0
** Total use:125792 unuse:16072 count:2415 **
Get GpeHdl Status = 0 - AE_OK
Event [_L01]
Install GPE0x1  Status 0x0
Event [_L0B]
Install GPE0xB  Status 0x0
Event [_L10]
Install GPE0x10  Status 0x0
Event [_L03]
Install GPE0x3  Status 0x0
Event [_L09]
Install GPE0x9  Status 0x0
Event [_L0D]
Install GPE0xD  Status 0x0
Event [_L05]
Install GPE0x5  Status 0x0
Event [_L00]
Install GPE0x0  Status 0x0
Event [_L15]
Install GPE0x15  Status 0x0
Event [_L11]
Install GPE0x11  Status 0x0
EndScan GPE Status 0
===== Info ========
Int Level 9
In Xrupt F96F3ED0 in arg F96F3ED0
      Node
Name [_GPE]
Flags: 0
Reg count 4
GPE0x0 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x1 Flag:0x4 Status - Set 0x0 Enable 0x0
GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0 Status:4020 Enable:4024 EnableWake:29 EnableRun:2 BaseGPENumber:0
GPE0x9 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
GPE1 Status:4021 Enable:4025 EnableWake:2A EnableRun:0 BaseGPENumber:8
GPE0x10 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x11 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x15 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE2 Status:4022 Enable:4026 EnableWake:23 EnableRun:0 BaseGPENumber:10
GPE3 Status:4023 Enable:4027 EnableWake:0 EnableRun:0 BaseGPENumber:18
===== Info ========
Int Level 9
In Xrupt F96F3ED0 in arg F96F4140
      Node
Name [_GPE]
Flags: 0
Reg count 8
GPE0 Status:44A0 Enable:44A8 EnableWake:0 EnableRun:0 BaseGPENumber:20
GPE1 Status:44A1 Enable:44A9 EnableWake:0 EnableRun:0 BaseGPENumber:28
GPE2 Status:44A2 Enable:44AA EnableWake:0 EnableRun:0 BaseGPENumber:30
GPE3 Status:44A3 Enable:44AB EnableWake:0 EnableRun:0 BaseGPENumber:38
GPE4 Status:44A4 Enable:44AC EnableWake:0 EnableRun:0 BaseGPENumber:40
GPE5 Status:44A5 Enable:44AD EnableWake:0 EnableRun:0 BaseGPENumber:48
GPE6 Status:44A6 Enable:44AE EnableWake:0 EnableRun:0 BaseGPENumber:50
GPE7 Status:44A7 Enable:44AF EnableWake:0 EnableRun:0 BaseGPENumber:58
=========== Status 0x0 0
PSDFree: at 0xF9C00000 success!
APM: PSD find success. PSD Ftable:F9C101D0
Register Notify 1st FFC5F1CE 
FindPCIDevice
Gradd: PSD find success. PSD Ftable:F9C101D0
******** Event tread ***************
APM: Setting suspend state:1