1 | Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005. |
---|
2 | Loaded Vendor Data : "This is version ha_merged, 11 Oct 2010 08:16:43" |
---|
3 | |
---|
4 | PCI BIOS Version 2.10 found! |
---|
5 | Number of PCI Busses : 1 |
---|
6 | PCI Characteristics : Config Mechanism 1 |
---|
7 | |
---|
8 | Searching for PCI Devices using the OEMHLP$ driver |
---|
9 | |
---|
10 | Bus 0 (PCI), Device Number 0, Device Function 0 |
---|
11 | Vendor 8086h Intel Corporation |
---|
12 | Device 7030h 430VX - 82437VX TVX [Triton VX] |
---|
13 | Command 0006h (Memory Access, BusMaster) |
---|
14 | Status 2200h (Received Master Abort, Medium Timing) |
---|
15 | Revision 01h, Header Type 00h, Bus Latency Timer 20h |
---|
16 | Self test 00h (Self test not supported) |
---|
17 | PCI Class Bridge, type PCI to HOST |
---|
18 | |
---|
19 | Bus 0 (PCI), Device Number 7, Device Function 0 |
---|
20 | Vendor 8086h Intel Corporation |
---|
21 | Device 7000h 82371SB PIIX3 ISA [Natoma/Triton II] |
---|
22 | Command 000Fh (I/O Access, Memory Access, BusMaster, Special Cycles) |
---|
23 | Status 0280h (Supports Back-To-Back Trans., Medium Timing) |
---|
24 | Revision 00h, Header Type 80h, Bus Latency Timer 00h |
---|
25 | Self test 00h (Self test not supported) |
---|
26 | PCI Class Bridge, type PCI to ISA |
---|
27 | |
---|
28 | Bus 0 (PCI), Device Number 7, Device Function 1 |
---|
29 | Vendor 8086h Intel Corporation |
---|
30 | Device 7010h 82371SB PIIX3 IDE [Natoma/Triton II] |
---|
31 | Command 0005h (I/O Access, BusMaster) |
---|
32 | Status 0280h (Supports Back-To-Back Trans., Medium Timing) |
---|
33 | Revision 00h, Header Type 00h, Bus Latency Timer 20h |
---|
34 | Self test 00h (Self test not supported) |
---|
35 | PCI Class Storage, type IDE (ATA) |
---|
36 | PCI EIDE Controller Features : |
---|
37 | BusMaster EIDE is supported |
---|
38 | Primary Channel is at I/O Port 01F0h and IRQ 14 |
---|
39 | Secondary Channel is at I/O Port 0170h and IRQ 15 |
---|
40 | Address 0 is not present or not configured! |
---|
41 | Address 1 is not present or not configured! |
---|
42 | Address 2 is not present or not configured! |
---|
43 | Address 3 is not present or not configured! |
---|
44 | Address 4 is an I/O Port : 9000h..9007h |
---|
45 | |
---|
46 | Bus 0 (PCI), Device Number 17, Device Function 0 |
---|
47 | Vendor 10DEh nVidia Corporation |
---|
48 | Device 002Dh NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] |
---|
49 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
50 | Status 02B0h (Has Capabilities List, Supports 66MHz, |
---|
51 | Supports Back-To-Back Trans., Medium Timing) |
---|
52 | Revision 15h, Header Type 00h, Bus Latency Timer 20h |
---|
53 | Minimum Bus Grant 05h, Maximum Bus Latency 01h |
---|
54 | Self test 00h (Self test not supported) |
---|
55 | PCI Class Display, type VGA |
---|
56 | Address 0 is a Memory Address (0-4GiB) : E2000000h..E2FFFFFFh |
---|
57 | Address 1 is a Memory Address (0-4GiB, Prefetchable) : E0000000h..E1FFFFFFh |
---|
58 | System IRQ 11, INT# A |
---|
59 | Expansion ROM of 64 KiB decoded by this card, currently disabled |
---|
60 | New Capabilities List Present: |
---|
61 | Power Management Capability, Version 1.0 |
---|
62 | Does not support low power State D1 or D2 |
---|
63 | Does not support PME# signalling |
---|
64 | Current Power State : D0 (Device operational, no power saving) |
---|
65 | |
---|
66 | Bus 0 (PCI), Device Number 19, Device Function 0 |
---|
67 | Vendor 10ECh Realtek Semiconductor Co., Ltd. |
---|
68 | Device 8139h RTL-8139/8139C/8139C+ |
---|
69 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
70 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
71 | Medium Timing) |
---|
72 | Revision 10h, Header Type 00h, Bus Latency Timer 20h |
---|
73 | Minimum Bus Grant 20h, Maximum Bus Latency 40h |
---|
74 | Self test 00h (Self test not supported) |
---|
75 | PCI Class Network, type Ethernet |
---|
76 | Subsystem ID 813910ECh RT8139 (A/B/C/810x) Fast Ethernet Adapter (Generic ID) |
---|
77 | Subsystem Vendor 10ECh Realtek Semiconductor Co., Ltd. |
---|
78 | Address 0 is an I/O Port : 6000h..60FFh |
---|
79 | Address 1 is a Memory Address (0-4GiB) : E3000000h..E30000FFh |
---|
80 | System IRQ 10, INT# A |
---|
81 | New Capabilities List Present: |
---|
82 | Power Management Capability, Version 1.1 |
---|
83 | Supports low power State D1 |
---|
84 | Supports low power State D2 |
---|
85 | Supports PME# signalling from mode(s) D1, D2, D3hot |
---|
86 | PME# signalling is currently disabled |
---|
87 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
88 | Current Power State : D0 (Device operational, no power saving) |
---|
89 | Vital Product Data Capability |
---|
90 | VPD Data not present |
---|
91 | |
---|
92 | Bus 0 (PCI), Device Number 20, Device Function 0 |
---|
93 | Vendor 1033h NEC Corporation |
---|
94 | Device 0035h USB |
---|
95 | Command 0006h (Memory Access, BusMaster) |
---|
96 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
97 | Revision 41h, Header Type 80h, Bus Latency Timer 20h |
---|
98 | Minimum Bus Grant 01h, Maximum Bus Latency 2Ah |
---|
99 | Self test 00h (Self test not supported) |
---|
100 | PCI Class Serial, type USB (OHCI) |
---|
101 | Subsystem ID 010514C2h PTI-205N USB 2.0 Host Controller |
---|
102 | Subsystem Vendor 14C2h DTK Computer |
---|
103 | Address 0 is a Memory Address (0-4GiB) : E3001000h..E3001FFFh |
---|
104 | System IRQ 10, INT# A |
---|
105 | New Capabilities List Present: |
---|
106 | Power Management Capability, Version 1.1 |
---|
107 | Supports low power State D1 |
---|
108 | Supports low power State D2 |
---|
109 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot |
---|
110 | PME# signalling is currently disabled |
---|
111 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
112 | Current Power State : D0 (Device operational, no power saving) |
---|
113 | |
---|
114 | Bus 0 (PCI), Device Number 20, Device Function 1 |
---|
115 | Vendor 1033h NEC Corporation |
---|
116 | Device 0035h USB |
---|
117 | Command 0006h (Memory Access, BusMaster) |
---|
118 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
119 | Revision 41h, Header Type 00h, Bus Latency Timer 20h |
---|
120 | Minimum Bus Grant 01h, Maximum Bus Latency 2Ah |
---|
121 | Self test 00h (Self test not supported) |
---|
122 | PCI Class Serial, type USB (OHCI) |
---|
123 | Subsystem ID 010514C2h PTI-205N USB 2.0 Host Controller |
---|
124 | Subsystem Vendor 14C2h DTK Computer |
---|
125 | Address 0 is a Memory Address (0-4GiB) : E3002000h..E3002FFFh |
---|
126 | System IRQ 11, INT# B |
---|
127 | New Capabilities List Present: |
---|
128 | Power Management Capability, Version 1.1 |
---|
129 | Supports low power State D1 |
---|
130 | Supports low power State D2 |
---|
131 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot |
---|
132 | PME# signalling is currently disabled |
---|
133 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
134 | Current Power State : D0 (Device operational, no power saving) |
---|
135 | |
---|
136 | Bus 0 (PCI), Device Number 20, Device Function 2 |
---|
137 | Vendor 1033h NEC Corporation |
---|
138 | Device 00E0h USB 2.0 |
---|
139 | Command 0006h (Memory Access, BusMaster) |
---|
140 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
141 | Revision 02h, Header Type 00h, Bus Latency Timer 20h |
---|
142 | Minimum Bus Grant 10h, Maximum Bus Latency 22h |
---|
143 | Self test 00h (Self test not supported) |
---|
144 | PCI Class Serial, type USB 2.0 (EHCI) |
---|
145 | Subsystem ID 020514C2h PTI-205N USB 2.0 Host Controller |
---|
146 | Subsystem Vendor 14C2h DTK Computer |
---|
147 | Address 0 is a Memory Address (0-4GiB) : E3003000h..E30030FFh |
---|
148 | System IRQ 10, INT# C |
---|
149 | New Capabilities List Present: |
---|
150 | Power Management Capability, Version 1.1 |
---|
151 | Supports low power State D1 |
---|
152 | Supports low power State D2 |
---|
153 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot |
---|
154 | PME# signalling is currently disabled |
---|
155 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
156 | Current Power State : D0 (Device operational, no power saving) |
---|
157 | |
---|
158 | ROM PCI IRQ routing table Tests.... |
---|
159 | No ROM PCI IRQ routing table found!!! |
---|
160 | |
---|
161 | IRQ Summary: IRQs 10,11,14,15 are used by PCI devices |
---|
162 | Shared IRQs: IRQ 10 is shared by 3 PCI Devices |
---|
163 | IRQ 11 is shared by 2 PCI Devices |
---|