Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005. Loaded Vendor Data : "This is version ha_merged, 11 Oct 2010 08:16:43" PCI BIOS Version 2.10 found! Number of PCI Busses : 2 PCI Characteristics : Config Mechanism 1 Searching for PCI Devices using the OEMHLP$ driver Bus 0 (PCI), Device Number 0, Device Function 0 Vendor 1022h Advanced Micro Devices [AMD] Device 7006h AMD-751 [Irongate] System Controller Command 0106h (Memory Access, BusMaster, System Errors) Status 2210h (Has Capabilities List, Received Master Abort, Medium Timing) Revision 25h, Header Type 80h, Bus Latency Timer 78h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to HOST Address 0 is a Memory Address (0-4GiB, Prefetchable) : E8000000h..EBFFFFFFh Address 1 is a Memory Address (0-4GiB, Prefetchable) : EDDFF000h..EDDFFFFFh Address 2 is an I/O Port : C800h..C803h New Capabilities List Present: AGP Capability, Version 1.0 (AGP 1x and/or 2x support) AGP Speed(s) Supported : 1x 2x FW Transfers Supported : No >4GiB Address Space Supported : No Sideband Addressing Supported : Yes Maximum Command Queue Length : 16 bytes AGP Speed Selected : 2x FW Transfers Enabled : No >4GiB Address Space Enabled : No AGP Enabled : Yes Sideband Addressing Enabled : Yes Current Command Queue Length : 1 byte Bus 0 (PCI), Device Number 1, Device Function 0 Vendor 1022h Advanced Micro Devices [AMD] Device 7007h AMD-751 [Irongate] AGP Bridge Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) Status 0220h (Supports 66MHz, Medium Timing) Revision 01h, Header Type 81h, Bus Latency Timer 78h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to PCI PCI Bridge Information: Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1 Secondary Bus Command 000Ah (CSERR forwarded, VGA mapping) Secondary Bus Status 2220h (Supports 66MHz, Received Master Abort, Medium Timing) Secondary Bus Latency 20h I/O Port Range Passed to Secondary Bus : 00008000h..00009FFFh (32-bit) Memory Range Passed to Secondary Bus : EDE00000h..EFEFFFFFh Prefetchable Memory Range Passed to Secondary Bus : E5C00000h..E5CFFFFFh Bus 0 (PCI), Device Number 7, Device Function 0 Vendor 1022h Advanced Micro Devices [AMD] Device 7408h AMD-756 [Viper] ISA Command 000Fh (I/O Access, Memory Access, BusMaster, Special Cycles) Status 0200h (Medium Timing) Revision 01h, Header Type 80h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to ISA Bus 0 (PCI), Device Number 7, Device Function 1 Vendor 1022h Advanced Micro Devices [AMD] Device 7409h AMD-756 [Viper] IDE Command 0005h (I/O Access, BusMaster) Status 0200h (Medium Timing) Revision 07h, Header Type 00h, Bus Latency Timer 20h Self test 00h (Self test not supported) PCI Class Storage, type IDE (ATA) PCI EIDE Controller Features : BusMaster EIDE is supported Primary Channel is at I/O Port 01F0h and IRQ 14 Secondary Channel is at I/O Port 0170h and IRQ 15 Address 0 is not present or not configured! Address 1 is not present or not configured! Address 2 is not present or not configured! Address 3 is not present or not configured! Address 4 is an I/O Port : F000h..F007h Bus 0 (PCI), Device Number 7, Device Function 3 Vendor 1022h Advanced Micro Devices [AMD] Device 740Bh AMD-756 [Viper] ACPI Command 0000h (Bus Access Disabled!!) Status 0280h (Supports Back-To-Back Trans., Medium Timing) Revision 03h, Header Type 00h, Bus Latency Timer 78h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to Other Bus 0 (PCI), Device Number 7, Device Function 4 Vendor 1022h Advanced Micro Devices [AMD] Device 740Ch AMD-756 [Viper] USB Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Errors) Status 0280h (Supports Back-To-Back Trans., Medium Timing) Revision 06h, Header Type 00h, Bus Latency Timer 10h Minimum Bus Grant 00h, Maximum Bus Latency 50h Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Serial, type USB (OHCI) Address 0 is a Memory Address (0-4GiB) : EFFFB000h..EFFFBFFFh System IRQ 12, INT# D Bus 0 (PCI), Device Number 8, Device Function 0 Vendor 1000h LSI Logic / Symbios Logic Device 000Fh 53c875 Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate, System Errors) Status 0210h (Has Capabilities List, Medium Timing) Revision 26h, Header Type 00h, Bus Latency Timer 90h Minimum Bus Grant 11h, Maximum Bus Latency 40h Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Storage, type SCSI Subsystem ID 39041DE1h DC390F/U Ultra Wide SCSI Adapter Subsystem Vendor 1DE1h Tekram Technology Co.,Ltd. Address 0 is an I/O Port : D000h..D0FFh Address 1 is a Memory Address (0-4GiB) : EFFFFF00h..EFFFFFFFh Address 2 is a Memory Address (0-4GiB) : EFFFE000h..EFFFEFFFh System IRQ 10, INT# A Expansion ROM of 64 KiB decoded by this card, currently disabled New Capabilities List Present: Power Management Capability, Version 1.0 Does not support low power State D1 or D2 Does not support PME# signalling Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI), Device Number 9, Device Function 0 Vendor 1102h Creative Labs Device 0002h SB Live! EMU10k1 Command 0105h (I/O Access, BusMaster, System Errors) Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing) Revision 0Ah, Header Type 80h, Bus Latency Timer 40h Minimum Bus Grant 02h, Maximum Bus Latency 14h Self test 00h (Self test not supported) PCI Class Multimedia, type Audio Subsystem ID 80671102h SBLive! 5.1 eMicro 28028 Subsystem Vendor 1102h Creative Labs Address 0 is an I/O Port : CC00h..CC1Fh System IRQ 11, INT# A New Capabilities List Present: Power Management Capability, Version 1.0 Supports low power State D1 Supports low power State D2 Does not support PME# signalling Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI), Device Number 9, Device Function 1 Vendor 1102h Creative Labs Device 7002h SB Live! Game Port Command 0105h (I/O Access, BusMaster, System Errors) Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing) Revision 0Ah, Header Type 80h, Bus Latency Timer 40h Self test 00h (Self test not supported) PCI Class Input, type Other Subsystem ID 00201102h Gameport Joystick Subsystem Vendor 1102h Creative Labs Address 0 is an I/O Port : DC00h..DC07h New Capabilities List Present: Power Management Capability, Version 1.0 Supports low power State D1 Supports low power State D2 Does not support PME# signalling Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI), Device Number 10, Device Function 0 Vendor 1033h NEC Corporation Device 0035h USB Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Errors) Status 0210h (Has Capabilities List, Medium Timing) Revision 41h, Header Type 80h, Bus Latency Timer 40h Minimum Bus Grant 01h, Maximum Bus Latency 2Ah Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Serial, type USB (OHCI) Subsystem ID 00011799h Root Hub Subsystem Vendor 1799h Belkin Address 0 is a Memory Address (0-4GiB) : EFFFC000h..EFFFCFFFh System IRQ 9, INT# A New Capabilities List Present: Power Management Capability, Version 1.1 Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D0, D1, D2, D3hot PME# signalling is currently disabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI), Device Number 10, Device Function 1 Vendor 1033h NEC Corporation Device 0035h USB Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Errors) Status 0210h (Has Capabilities List, Medium Timing) Revision 41h, Header Type 00h, Bus Latency Timer 40h Minimum Bus Grant 01h, Maximum Bus Latency 2Ah Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Serial, type USB (OHCI) Subsystem ID 00011799h Root Hub Subsystem Vendor 1799h Belkin Address 0 is a Memory Address (0-4GiB) : EFFFD000h..EFFFDFFFh System IRQ 12, INT# B New Capabilities List Present: Power Management Capability, Version 1.1 Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D0, D1, D2, D3hot PME# signalling is currently disabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI), Device Number 10, Device Function 2 Vendor 1033h NEC Corporation Device 00E0h USB 2.0 Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Errors) Status 0210h (Has Capabilities List, Medium Timing) Revision 02h, Header Type 00h, Bus Latency Timer 40h Minimum Bus Grant 10h, Maximum Bus Latency 22h Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Serial, type USB 2.0 (EHCI) Subsystem ID 00021799h Root Hub Subsystem Vendor 1799h Belkin Address 0 is a Memory Address (0-4GiB) : EFFFFD00h..EFFFFDFFh System IRQ 10, INT# C New Capabilities List Present: Power Management Capability, Version 1.1 Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D0, D1, D2, D3hot PME# signalling is currently disabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI), Device Number 12, Device Function 0 Vendor 10ECh Realtek Semiconductor Co., Ltd. Device 8139h RTL-8139/8139C/8139C+ Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing) Revision 10h, Header Type 00h, Bus Latency Timer 40h Minimum Bus Grant 20h, Maximum Bus Latency 40h Self test 00h (Self test not supported) PCI Class Network, type Ethernet Subsystem ID 813910ECh RT8139 (A/B/C/810x) Fast Ethernet Adapter (Generic ID) Subsystem Vendor 10ECh Realtek Semiconductor Co., Ltd. Address 0 is an I/O Port : D800h..D8FFh Address 1 is a Memory Address (0-4GiB) : EFFFFE00h..EFFFFEFFh System IRQ 10, INT# A Expansion ROM of 64 KiB decoded by this card, currently disabled New Capabilities List Present: Power Management Capability, Version 1.1 Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D1, D2, D3hot, D3cold PME# signalling is currently disabled 3.3v AUX Current required : 375 mA Current Power State : D0 (Device operational, no power saving) Vital Product Data Capability VPD Data not present Bus 1 (AGP), Device Number 5, Device Function 0 Vendor 1002h ATI Technologies Inc Device 4742h 3D Rage Pro AGP 1X/2X Command 0087h (I/O Access, Memory Access, BusMaster, Wait Cycles) Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing) Revision 5Ch, Header Type 00h, Bus Latency Timer 40h Minimum Bus Grant 08h, Maximum Bus Latency 00h Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Display, type VGA Subsystem ID 00841002h Rage Pro Turbo AGP 2X Subsystem Vendor 1002h ATI Technologies Inc Address 0 is a Memory Address (0-4GiB) : EE000000h..EEFFFFFFh Address 1 is an I/O Port : 9800h..98FFh Address 2 is a Memory Address (0-4GiB) : EFEFF000h..EFEFFFFFh System IRQ 11, INT# A Expansion ROM of 128 KiB decoded by this card, currently disabled New Capabilities List Present: AGP Capability, Version 1.0 (AGP 1x and/or 2x support) AGP Speed(s) Supported : 1x 2x FW Transfers Supported : No >4GiB Address Space Supported : No Sideband Addressing Supported : Yes Maximum Command Queue Length : 256 bytes AGP Speed Selected : 2x FW Transfers Enabled : No >4GiB Address Space Enabled : No AGP Enabled : Yes Sideband Addressing Enabled : Yes Current Command Queue Length : 1 byte ROM PCI IRQ routing table Tests.... ROM IRQ routing table found at F000h:7DC0h Table Version 1.0 - OK Table size 144 bytes - OK Table Checksum F2h - OK PCI Interrupt Router: AMD-756 [Viper] ACPI IRQ's dedicated to PCI : None The ROM PCI IRQ routing table appears to be OK. IRQ Summary: IRQs 9,10,11,12,14,15 are used by PCI devices Shared IRQs: IRQ 10 is shared by 3 PCI Devices IRQ 11 is shared by 2 PCI Devices IRQ 12 is shared by 2 PCI Devices