Context Navigation

Timeline

12:54 Changeset [479] by erdmann: update legacy handoff. We better leave everything UNTOUCHED if we don't …

22:12 Changeset [478] by erdmann: various updates, in particular to USBOHCD to get David's problematic …

00:02 Changeset [477] by erdmann: move OHCIStopBIOS back into OHCIReset. and do a CLI, power on ports, …

18:29 WikiStart edited by diver: feedback analysis explained. (diff)
18:24 Ticket #21 (View Tickets) closed by diver: fixed: added 5 additional reports, added a "Feedback pending" priotity and some …
18:22 Ticket #21 (View Tickets) created by diver: in the view tickets a lot usefull reports are missing. see samba and …

22:06 Changeset [476] by erdmann: make sure that if used for setting operational registers, these are always …
22:05 Changeset [475] by erdmann: fix typo
22:05 Changeset [474] by erdmann: for INIT,INIT_COMPLETE,SHUTDOWN, use tight delay loops even for extended …
15:43 Ticket #20 (System has only USB 2.0, but USB keyboard, mouse have problems) created by BlondeGuy: This is an ASRock H55M-LE, and has USB 2.0 only. There are two instances …
03:24 Changeset [473] by erdmann: add some timing delays for mandatory minimum reset time and so that device …
03:19 Changeset [472] by erdmann: if /FS flag set on OS shutdown, after putting HC into suspend, wait for …
03:17 Changeset [471] by erdmann: back out a change: for low speed and full speed devices we DO NOT have a …
03:15 Changeset [470] by erdmann: if /FS flag set on OS shutdown, put HC into suspend instead of putting it …
03:12 Changeset [469] by erdmann: if /FS flag set on OS shutdown, put HC into suspend instead of putting it …
03:10 Changeset [468] by erdmann: allow suspend/resume processing also for USBMSD, remove all related stuff

10:33 Ticket #13 (Just 4 usbuhcd.sys entries) closed by erdmann: wontfix
10:32 Ticket #8 (eCS 2.1 boot hangs at USBEHCD or USBD) closed by erdmann: wontfix
10:32 Ticket #4 (usbehcd init complete delay) closed by erdmann: wontfix
10:31 Ticket #12 (key card not viewed by USB drives or LVM?) closed by erdmann: wontfix

03:00 Changeset [467] by erdmann: removed routines "SetFMInterval" and "SetPeriodicStart?" as they would not …
01:01 Changeset [466] by erdmann: on reset, as first action, halt the HC (to be in line with USBEHCD.SYS), …
00:55 Changeset [465] by erdmann: poll all ports for resetting of OWNER flag on setting global CONFIG flag, …

17:33 Ticket #19 (Placing USBEHCD after USBUHCD in CONFIG.SYS hangs at boot) created by Lewisr: Hardware: ThinkPad? T43 USB drivers & PC Card drivers …

21:21 Changeset [464] by erdmann: remove unused parameter
21:20 Changeset [463] by erdmann: update makefiles and build scripts
08:44 Changeset [462] by erdmann: backout SET/CLEAR Feature sync between Companion and Master controller: …
08:21 Changeset [461] by erdmann: USB(x)HCD: on end of reset, make sure that device interrupts are enabled …

05:27 Ticket #18 (Regression - with v10.182 USB worked - with v10.183 USB do not work) created by voyagerbuddy: With v10.183 USB devices plugged in at boot work will work. If USB …

08:51 Changeset [460] by erdmann: backout
04:10 Changeset [459] by erdmann: backout
03:53 Changeset [458] by erdmann: for one reason or the other I now need to also link in the slibcep …
02:41 Changeset [457] by erdmann: how incredibly odd: in order to use CL=/B1c1l.exe /B2c2l.exe /B3c3l.exe as …

22:52 Changeset [455] by erdmann: adding traces to each and every left over retry count
22:18 Changeset [454] by erdmann: clean up and unify tracing, adjust page width for assembler listing, …

03:31 Changeset [453] by erdmann: change the last spot that polls for a bit to use Delay instead of …
03:30 Changeset [452] by erdmann: fix a stupid bug: it would not properly poll for the RESET bit with a …
03:28 Changeset [451] by erdmann: change delay routine to avoid xchg bx,bx being placed into the code as …

09:51 Ticket #17 (T61: After SUSPEND/RESUME memory stick is not assigned a drive letter) created by landb: Using version 181/182 with ACPI3.19.15 on a T61 (built in 2 slot USB2) …

22:22 Ticket #16 (Regression - with v179 USB worked - with v181 USB does not work) closed by erdmann: fixed
14:37 Changeset [450] by erdmann: report an error if required env. variable CLIB is not defined

22:37 Changeset [449] by erdmann: no, this is 10.182
22:36 Changeset [448] by erdmann: no, this is 10.182
21:38 Changeset [447] by erdmann: this is 10.182
21:37 Changeset [446] by erdmann: svn.netlabs.org/usb/ticket/16: changes for ICH6 controller

22:48 WikiStart edited by stevenhl: Add netlabs login info and some developer info (diff)
07:28 Ticket #16 (Regression - with v179 USB worked - with v181 USB does not work) created by voyagerbuddy: I have a IBM Think Centre M51 computer. This computer was used by my wife …
00:47 Changeset [445] by erdmann: migrating USBD.SYS to supporting variable length configuration data in the …

23:40 Changeset [444] by erdmann: see eComStation bug #1400 and #3010 on USBD.SYS version 10.162: it's NOT …

Note: See TracTimeline for information about the timeline view.