/***************************************************************************** * * SOURCE FILE NAME = SVGAPMI.H * * DESCRIPTIVE NAME = * * Copyright : COPYRIGHT IBM CORPORATION, 1991, 1992 * Copyright Microsoft Corporation, 1990 * LICENSED MATERIAL - PROGRAM PROPERTY OF IBM * REFER TO COPYRIGHT INSTRUCTION FORM#G120-2083 * RESTRICTED MATERIALS OF IBM * IBM CONFIDENTIAL * * VERSION = V2.0 * * DATE * * DESCRIPTION Contains VIDEOPMI specific defintions * * FUNCTIONS * * NOTES * * STRUCTURES * * EXTERNAL REFERENCES * * EXTERNAL FUNCTIONS * * CHANGE ACTIVITY = * DATE FLAG APAR CHANGE DESCRIPTION * -------- ---------- ----- -------------------------------------- * mm/dd/yy @Vr.mpppxx xxxxx xxxxxxx * 02/14/96 @V3.2TSU00 148283 Merlin PBE, support linear aperture * 04/18/96 @V3.2TSU01 150783 Add flags for _int10handler * 07/15/96 @V3.2TSU02 160023 Use the old VIDEO_ADAPTER & VIDEOMDOEINFO * *****************************************************************************/ /* * This flag is used to set the linear aperture mode. * the pIn passed in PMIREQUEST_SETMODE will be the pointer to * (mode number | SET_LINEAR_BUFFER_MODE). */ #define SET_LINEAR_BUFFER_MODE 0x80000000 /* * definitions of bus type */ #define ISA_BUS 0 #define VLB_BUS 1 #define PCI_BUS 2 #define EISA_BUS 3 #define PCMCIA_BUS 4 #define MCA_BUS 5 /* * endian type */ #define LITTLE_ENDIAN 0 #define BIG_ENDIAN 1 /* ** VIDEOPMI.DLL prototypes. */ /* NOINC */ #define HVIDEO PVOID typedef HVIDEO *PHVIDEO; #ifndef APIENTRY #define APIENTRY /* nothing */ #endif #ifndef APIRET #define APIRET ULONG #endif typedef ULONG MODEID; typedef MODEID FAR *PMODEID; /* ** PMIREQUEST_SOFTWAREINT structures @V3.2SEN01 */ typedef struct { ULONG ulFlags; //VDM initialization type #define VDM_POSTLOAD 0x1 //adapter just loaded, used internally for initialization #define VDM_INITIALIZE 0x2 //force initialization of a permanently open VDM, even if previously initialized #define VDM_TERMINATE_POSTINITIALIZE 0x6 //start VDM with initialization, but close it afterwards (includes VDM_INITIALIZE) #define VDM_QUERY_CAPABILITY 0x10 // query the current int 10 capability #define VDM_FULL_VDM_CREATED 0x20 // a full VDM is created #define VDM_MINI_VDM_CREATED 0x40 // a mini VDM is created #define VDM_MINI_VDM_SUPPORTED 0x80 // mini VDM support is available PCHAR szName; //VDM initialization program PCHAR szArgs; //VDM initialization arguments }INITVDM; /* * Don't change these structures without * changing the kernel dos\dosinc\vdmint10.h ! */ typedef struct { BYTE bBufferType; // input vs output buffer #define BUFFER_NONE 0 #define INPUT_BUFFER 1 #define OUTPUT_BUFFER 2 BYTE bReserved; BYTE bSelCRF; // CRF flag for the selector: ulong index into the CRF BYTE bOffCRF; // CRF flag for the offset: ulong index into the CRF PVOID pAddress; // linear address of the buffer ULONG ulSize; }BUFFER, *PBUFFER; // CRF taken from kmode.h typedef struct vcrf_s { ULONG reg_eax; ULONG reg_ebx; ULONG reg_ecx; ULONG reg_edx; ULONG reg_ebp; ULONG reg_esi; ULONG reg_edi; ULONG reg_ds; ULONG reg_es; ULONG reg_fs; ULONG reg_gs; ULONG reg_cs; ULONG reg_eip; ULONG reg_eflag; ULONG reg_ss; ULONG reg_esp; }VCRF; typedef struct { ULONG ulBIOSIntNo; /* 0x10 for INT10 calls */ VCRF aCRF; BUFFER pB[2]; }INTCRF; #define VPRPMI "VPRPMI$" #define VPRSYSREQ_INT10HANDLER 1 #define VPRSYSREQ_INT10WAITFORPDB 2 #define VPRSYSREQ_MARKINT10VDM 3 #define VPRSYSREQ_MAX VPRSYSREQ_MARKINT10VDM /* @V3.2SEN01 end */ /* ** Structures passed as input and output parameters. */ typedef struct _VIDEOMODEINFO { /* vmi */ MODEID miModeId; /* used to make setmode request */ #define MODE_FLAG_NOT_MONO 0x0001 /* Mono-compatible */ #define MODE_FLAG_GRAPHICS 0x0002 /* Text mode, Graphics */ #define MODE_FLAG_NO_CLR_BRST 0x0004 /* Disable Color burst */ #define MODE_FLAG_NATIVE 0x0008 /* Native (advanced function) mode */ #define IGNORE_CLR_BRST 0x0010 /* Disable color burst doesn't make */ /* sense for this mode */ #define NOT_PLASMA 0x0020 /* @V2.2TSU00 won't work on plasma */ /* display */ #define MODE_FLAG_VGA_ENTRY 0x0040 /* VGA mode, need clean up */ #define MODE_FLAG_LINEAR_BUFFER 0x0100 /* flat frame buffer is supported */ #define MODE_FLAG_DIRECT_RGB 0x1000 /* direct color RGB */ #define MODE_FLAG_DIRECT_BGR 0x2000 /* direct color BGR */ #define MODE_FLAG_YUV 0x4000 /* YUV color format */ USHORT usType; /* mode type bits */ USHORT usInt10ModeSet; /* int 10 mode */ USHORT usXResolution; /* horizontal pels */ USHORT usYResolution; /* vertical scan lines */ ULONG ulBufferAddress; /* physical address of VRAM */ ULONG ulApertureSize; /* VRAM aperture */ BYTE bBitsPerPixel; /* no of colors */ BYTE bBitPlanes; /* number of planes */ BYTE bXCharSize; /* font width */ BYTE bYCharSize; /* font height */ USHORT usBytesPerScanLine; /* logical line length in bytes */ USHORT usTextRows; /* text rows */ ULONG ulPageLength; /* no of bytes to save a plane */ ULONG ulSaveSize; /* total bytes of VRAM to save */ /* * Monitor Info */ BYTE bVrtRefresh; BYTE bHrtRefresh; BYTE bVrtPolPos; BYTE bHrtPolPos; /* * Direct Color Fields. The same definitions as VESA 1.2 and up. */ CHAR bRedMaskSize; // @V3.2TSU02 CHAR bRedFieldPosition; // @V3.2TSU02 CHAR bGreenMaskSize; // @V3.2TSU02 CHAR bGreenFieldPosition; // @V3.2TSU02 CHAR bBlueMaskSize; // @V3.2TSU02 CHAR bBlueFieldPosition; // @V3.2TSU02 CHAR bRsvdMaskSize; // @V3.2TSU02 CHAR bRsvdFieldPosition; // @V3.2TSU02 /* * The number of colors can be derived from MaskSize fields. */ ULONG ulColors; // @V3.2TSU02 ULONG ulReserved[3]; // @V3.2TSU02 // USHORT usScrnTop; @V3.2TSU02 // USHORT usScrnBottom; @V3.2TSU02 // USHORT usScrnLeft; @V3.2TSU02 // USHORT usScrnRight; @V3.2TSU02 // CHAR szColorFormat[8]; @V3.2TSU02 // CHAR szColorWeight[8]; @V3.2TSU02 #ifndef VIDEOPMI_30_LEVEL /* ** The assumption is that all of the base video components ** are built together and shipped in unison. ** In order to build a back-level 3.0 base video component ** (VIDEOPMI, BVHSVGA, VIDEOCFG, IBMGPMI), define macro ** VIDEOPMI_30_LEVEL. */ // ULONG ulColors; /* @V3.2SEN01 @V3.2TSU02 */ #endif } VIDEOMODEINFO; typedef VIDEOMODEINFO FAR *PVIDEOMODEINFO; typedef struct _SVGARGB { /* rgb */ BYTE bR; BYTE bG; BYTE bB; BYTE bUnused; } SVGARGB; typedef SVGARGB FAR *PSVGARGB; #define EIGHT_BIT_DAC 0x00010000 /* over load ulRGBCount to tell */ /* videopmi the dac values are for */ /* 8 bit DAC. */ typedef struct _CLUTDATA { /* clt */ ULONG ulRGBCount; /* No of aRGB entries that follow */ ULONG ulRGBStart; /* Start index for RGB triplets */ SVGARGB aRGB[1]; /* One defined, ulRGBCount entries */ } CLUTDATA; typedef CLUTDATA FAR *PCLUTDATA; typedef struct _PALETTEDATA { /* pal */ ULONG ulPalCount; /* No of bPal.. entries that follow */ ULONG ulPalStart; /* Start index for data */ BYTE bPaletteData[1]; /* One defined, ulPalCount entries */ } PALETTEDATA; typedef PALETTEDATA FAR *PPALETTEDATA; typedef struct _FONTDATA { /* font */ ULONG ulCharCount; /* No of chars in font */ ULONG ulFontHeight; /* No of scanlines per character */ ULONG ulFontWidth; /* No of columns per character */ BYTE bFontData[1]; /* ulCharCount*ulFontHeight entries */ } FONTDATA; typedef FONTDATA FAR *PFONTDATA; typedef BYTE FAR *PVRAMDATA; typedef struct _CLEANDATA { /* clean */ USHORT Command; USHORT IndexPort; USHORT DataPort; USHORT Index; USHORT ANDMask; USHORT ORMask; } CLEANDATA; typedef struct _BANKDATA { /* bank */ MODEID miBank; /* */ ULONG ulBank; /* */ } BANKDATA; typedef BANKDATA FAR *PBANKDATA; #define MAX_OEM_STRING 128 #define MAX_DAC_STRING 128 #define MAX_VERSION 128 typedef struct _ADAPTERINFO { /* adi */ ULONG ulAdapterID; CHAR szOEMString[MAX_OEM_STRING]; /* adapter info from Hardware section */ CHAR szDACString[MAX_DAC_STRING]; /* DAC info from Hardware section */ CHAR szRevision[MAX_VERSION]; /* whatever the revision means */ ULONG ulTotalMemory; ULONG ulMMIOBaseAddress; ULONG ulPIOBaseAddress; BYTE bBusType; BYTE bEndian; USHORT usDeviceBusID; /* has to be 2 bytes */ USHORT usVendorBusID; /* has to be 2 bytes */ USHORT SlotID; /* has to be 2 bytes */ } ADAPTERINFO, FAR *PADAPTERINFO; /* * Adapter Instance definition. The structure will be passed in every * PMIREQUEST call. */ typedef struct _VIDEO_ADAPTER { /* va */ HVIDEO hvideo; /* ** The assumption is that all of the base video components ** are built together and shipped in unison (any driver including ** svgadefs.h and using the VIDEOPMI interface as well). ** ** @V3.0TSU00 ** All the callers to videopmi have to fill cbAdapterInfo and ** and cbVideoModeInfo with sizeof (ADAPTERINFO) and ** sizeof (VIDEOMODEINFO), respectively. It is for version control. ** All the DLLs called by videopmi have to access the ModeInfo field ** in VIDEO_ADAPTER by the offset of ModeInfo. ** For example, instead of pAdapter->ModeInfo.bBitsPerPixel, ** it should be ** ((PVIDEOMODEINFO)&((PBYTE)&(pAdapter->Adapter) + pAdapter->AdapterInfo_cb))-> ** bBitsPerPixel. */ // // Goes back to the old structure of OS/2 Warp 3.0. // // USHORT AdapterInfo_cb; @V3.2TSU02 // USHORT VideoModeInfo_cb; @V3.2TSU02 ADAPTERINFO Adapter; VIDEOMODEINFO ModeInfo; } VIDEO_ADAPTER, FAR *PVIDEO_ADAPTER; /* * prototype for import functions in PMI file */ typedef ULONG *PREGS; //pointer to registers. Passed to imported PMI functions. typedef APIRET (EXPENTRY FNIMPORTPMI)(PVIDEO_ADAPTER, PREGS); typedef FNIMPORTPMI *PFNIMPORTPMI; #ifdef INCL_16 #define VIDEOAPI FAR //this controls the calling convention. #else // 32-bit code #define VIDEOAPI EXPENTRY //C calling convention #endif /* ** prototype for META PMI imports @V3.2SEN01 */ typedef APIRET (VIDEOAPI FNPMIREQ)(PVIDEO_ADAPTER, PVOID, PVOID); typedef FNPMIREQ *PFNPMIREQ; typedef struct _PMIREQUEST { PFNPMIREQ pfnPMIRequest; ULONG ulRing2Call; } PMIREQUEST; typedef PMIREQUEST *PPMIREQUEST; #define METAPMI_LOADADAPTER "LoadAdapter" typedef APIRET (EXPENTRY FNIMPORTLOADPMI)(CHAR *,PPMIREQUEST); typedef FNIMPORTLOADPMI *PFNIMPORTLOADPMI; /* ** prototype for VIDEOPMI request functions */ typedef APIRET (VIDEOAPI FNVIDEOPMIREQUEST)(PVIDEO_ADAPTER, ULONG, PVOID, PVOID); typedef FNVIDEOPMIREQUEST *PFNVIDEOPMIREQUEST; /* used to exchange data with vvid */ typedef struct _VDDDATA { /* vdd */ PFNVIDEOPMIREQUEST npfnEntryPointAddress; HVIDEO hvideo; } VDDDATA; typedef VDDDATA *PVDDATA; /* INC */ /* ** Save Restore constants */ #define STATEFLAG_REGISTERS 0x0001 /* */ #define STATEFLAG_CLUT 0x0002 /* */ #define STATEFLAG_VRAM 0x0004 /* */ #define STATEFLAG_FONT 0x0008 /* */ /* NOINC */ typedef struct _VIDEOSTATE { /* vst */ ULONG fStateFlags; /* */ MODEID miState; /* */ PVOID pModeData; /* */ ULONG ulVRAMSaveSize; /* No of bytes/page to save */ PVRAMDATA pVRAM; /* */ PCLUTDATA pCLUT; /* */ PFONTDATA pFont; /* */ } VIDEOSTATE; typedef VIDEOSTATE FAR *PVIDEOSTATE; /* INC */ /* ** Function request parameters supported. */ #define PMIREQUEST_SETMODE 0 #define PMIREQUEST_LOCKREGISTERS 1 #define PMIREQUEST_UNLOCKREGISTERS 2 #define PMIREQUEST_CLEANUP 3 #define PMIREQUEST_SAVESTATE 4 #define PMIREQUEST_RESTORESTATE 5 #define PMIREQUEST_GETBANK 6 #define PMIREQUEST_SETBANK 7 #define PMIREQUEST_GETCLUT 8 #define PMIREQUEST_SETCLUT 9 #define PMIREQUEST_GETPALETTE 10 #define PMIREQUEST_SETPALETTE 11 #define PMIREQUEST_GETFONT 12 #define PMIREQUEST_SETFONT 13 #define PMIREQUEST_TUNEDISPLAY 14 /* @V2.2TSU00 */ #define PMIREQUEST_QUERYMAXMODEENTRIES 15 #define PMIREQUEST_QUERYMAXMODELISTSIZE 16 #define PMIREQUEST_QUERYMODEINFODATA 17 #define PMIREQUEST_QUERYMAXTRAPENTRIES 18 #define PMIREQUEST_QUERYTRAPLISTDATA 19 #define PMIREQUEST_QUERYMODEHRDWRLIST 20 /* @V2.2TSU00 */ #define PMIREQUEST_LOADPMIFILE 21 #define PMIREQUEST_IDENTIFYADAPTER 22 #define PMIREQUEST_SOFTWAREINT 23 /* @V3.2SEN01 */ #define PMIREQUEST_INT10 PMIREQUEST_SOFTWAREINT #define PMIREQUEST_UNLOADPMIFILE 24 #define PMIREQUEST_SETMEMORYIOADDRESS 25 /* @V3.2TSU00 */ #define PMIREQUEST_MAX (PMIREQUEST_SETMEMORYIOADDRESS + 1) /* last entry + 1 */ /* NOINC */ /* * define PMIDEF_INCL to include the following definitions. */ #ifdef PMIDEF_INCL /* @V2.2TSU00 ** Possible flags in ModeAtrributes field in PMI file ** the flags will be saved in ModeInfo.ulType */ #define PMI_MODE_COLOUR 0x08 /* Bit 3 - 0 = mono, 1 = colour */ #define PMI_MODE_GRAPHICS 0x10 /* Bit 4 - 0 = text, 1 = graphics */ #define PMI_MODE_VGA_ENTRY 0x20/* vga entry, need clean up in set mode */ #define PMI_MODE_IGNORE_CLR_BRST 0x40 /* won't work on B/W mode */ #define PMI_MODE_LINEAR_APERTURE 0x80 /* linear aperture mode */ /* * PMI commands */ #define PMICMD_NONE 0xFF //reserved #define PMICMD_INB 0 #define PMICMD_OUTB 1 #define PMICMD_INW 2 #define PMICMD_OUTW 3 #define PMICMD_INDW 4 #define PMICMD_OUTDW 5 #define PMICMD_BINB 6 #define PMICMD_BOUTB 7 #define PMICMD_ABOUTW 8 #define PMICMD_ABOUTDW 9 #define PMICMD_RMWBN 10 #define PMICMD_RMWBI 11 #define PMICMD_RMWWN 12 #define PMICMD_REGOP 13 #define PMICMD_ASSIGN 14 /***************** for backward compatibility ***************/ #define PMICMD_WAIT 15 #define PMI_WAIT_CLEAR 0 /* Wait for CLEAR condition */ /***************** for backward compatibility ***************/ #define PMICMD_WAITB 16 #define PMICMD_WAITW 17 #define PMICMD_WAITDW 18 #define PMICMD_READB 19 /* @V2.2TSU00 */ #define PMICMD_READW 20 /* Don't rearrange the */ #define PMICMD_READDW 21 /* order or put */ #define PMICMD_WRITEB 22 /* anything in between */ #define PMICMD_WRITEW 23 /* for these MMIO */ #define PMICMD_WRITEDW 24 /* commands */ #define PMICMD_ROUTINE 25 /* @V2.2TSU01 */ #define PMICMD_LABEL 26 #define PMICMD_WHILE 27 #define PMICMD_ENDWHILE 28 #define PMICMD_IF 29 #define PMICMD_GOTO 30 #define PMICMD_STRCMP 31 #define PMICMD_MEMCMP 32 #define PMICMD_CALL 33 #define PMICMD_MAX PMICMD_CALL /* equals last entry */ #define PMI_REGOP_ASSIGN 0 /* Rxxx = */ #define PMI_REGOP_AND 1 /* Rxxx &= */ #define PMI_REGOP_OR 2 /* Rxxx |= */ #define PMI_REGOP_XOR 3 /* Rxxx ^= */ #define PMI_REGOP_PLUS 4 /* Rxxx += */ #define PMI_REGOP_MINUS 5 /* Rxxx -= */ #define PMI_REGOP_SHL 6 /* Rxxx <= */ #define PMI_REGOP_SHR 7 /* Rxxx >= */ #define PMI_REGOP_LESS 8 /* Rxx < Rxyy */ #define PMI_REGOP_LESS_EQUALS 9 /* Rxx <= Ryy */ #define PMI_REGOP_GREATER 10 /* Rxx > Rxyy */ #define PMI_REGOP_GREATER_EQUALS 11 /* Rxx >= Ryy */ #define PMI_REGOP_EQUALS 12 /* Rxx == Ryy */ #define PMI_REGOP_NOT_EQUALS 13 /* Rxx != Ryy */ #define PMI_REGOP_MAX PMI_REGOP_NOT_EQUALS /* must equal last entry */ /* ** Type Definitions ** ** Tokens are grouped, and must be kept that way. ** There are dummy tokens, place holders, TOK_??_BEGIN and TOK_??_END ** to make tests and expansion easier. Just be sure to keep token ** info for a given section, within these bounds. */ typedef enum _PMITOKEN { /* pt */ TOK_SECT_BEGIN, /***************** for backward compatibility ***************/ TOK_ADAPTERTYPE, /* Section Heading tokens */ TOK_CHIPSET, /***************** for backward compatibility ***************/ TOK_PMIVERSION, /* Section Heading tokens */ TOK_COMMENT, TOK_MODEINFO, TOK_SETMODE, TOK_MONITORMODEINFO, TOK_TRAPREGS, TOK_UNLOCK, TOK_LOCK, TOK_CLEANUP, TOK_SETBANK, TOK_GETBANK, TOK_DECLARATIONS, TOK_COPYVRAM, TOK_TUNEDISPLAY, TOK_SETMEMORYIOADDRESS, // @V3.2TSU00 TOK_HARDWARE, TOK_IDENTIFYADAPTER, TOK_ISENGINEBUSY, TOK_ENABLECONTROLLER, TOK_DISABLECONTROLLER, TOK_SETMONITORTIMINGS, TOK_ROUTINE_DECLR, /* @V2.2TSU01 */ TOK_INCLUDE, /* text include */ TOK_INCLUDECODE, /* DLL include */ TOK_SECT_END, TOK_MI_BEGIN, TOK_MODEATTRIBUTES, /* ModeInfo Section tokens */ TOK_INT10MODESET, /* @V2.2TSU00 int 10 mode */ TOK_BYTESPERSCANLINE, TOK_TEXTROWS, /* [ModeInfo] and [Hardware] tokens */ TOK_XRESOLUTION, /* are PMI keyvariables. Do remember */ TOK_YRESOLUTION, /* update the PMIKeyVarTable[] and */ TOK_XCHARSIZE, /* PMI Keyvariable defines in header file */ TOK_YCHARSIZE, TOK_BITSPERPIXEL, TOK_NUMBEROFPLANES, TOK_PAGELENGTH, TOK_SAVESIZE, TOK_BUFFERADDRESS, TOK_APERTURESIZE, TOK_COLORFORMAT, TOK_COLORWEIGHT, TOK_VERTICALREFRESH, TOK_HORIZONTALREFRESH, TOK_VPOLARITYPOSITIVE, TOK_HPOLARITYPOSITIVE, TOK_SCREENLEFTEDGE, TOK_SCREENRIGHTEDGE, TOK_SCREENTOPEDGE, TOK_SCREENBOTTOMEDGE, TOK_COLORS, /* @V3.2SEN01 number of colors field added */ /***************** for backward compatibility ***************/ TOK_INTERLACEMODE, /***************** for backward compatibility ***************/ TOK_MI_END, TOK_HARDWARE_BEGIN, /* @V2.2TSU00 Hardware Section */ TOK_BUSTYPE, TOK_OEMSTRING, TOK_DACSTRING, TOK_VERSION, TOK_TOTALMEMORY, TOK_MEMORYIOADDRESS, TOK_PORTIOADDRESS, TOK_ENDIAN, TOK_INT10SETMODE, /* @V3.1TSU00 */ TOK_HARDWARE_END, TOK_TRAP_BEGIN, TOK_BYTE_IOPORT, /* @V2.2TSU00, trap registers type */ TOK_WORD_IOPORT, TOK_DWORD_IOPORT, TOK_BYTE_MMIOPORT, TOK_WORD_MMIOPORT, TOK_DWORD_MMIOPORT, TOK_RESET, TOK_INDEX, TOK_INDEXMASK, TOK_DATAMASK, TOK_ACCEL, TOK_RO, TOK_WO, TOK_RW, TOK_TRAP_END, TOK_SM_BEGIN, TOK_INB, /* Command Section tokens */ TOK_OUTB, TOK_INW, TOK_INDW, TOK_OUTW, TOK_OUTDW, TOK_BINB, TOK_BOUTB, TOK_RMWBI, TOK_RMWBN, TOK_RMWWN, TOK_ABOUTW, TOK_ABOUTDW, TOK_IF, TOK_GOTO, TOK_VARIABLE, TOK_WHILE, TOK_ENDWHILE, TOK_MEMCMP, TOK_STRCMP, TOK_READB, /* @V2.2TSU00 */ TOK_READW, /* Don't rearrange the */ TOK_READDW, /* order or put */ TOK_WRITEB, /* anything in between */ TOK_WRITEW, /* for these MMIO */ TOK_WRITEDW, /* commands */ TOK_CALL, TOK_ROUTINE, /***************** for backward compatibility ***************/ TOK_WAIT, /***************** for backward compatibility ***************/ TOK_WAITB, TOK_WAITW, TOK_WAITDW, TOK_VALUE, TOK_PMIREG, TOK_LPAREN, TOK_RPAREN, TOK_LBRACE, TOK_RBRACE, TOK_EQUALS, TOK_NOTEQUALS, TOK_SEMICOLON, TOK_COMMA, TOK_COLON, TOK_MINUS, TOK_HYPHEN = TOK_MINUS, TOK_NEGATE, /* @V2.2TSU01 */ TOK_DOUBLEQUOTE, TOK_PLUS, TOK_REGOP_AND, TOK_REGOP_OR, TOK_REGOP_XOR, TOK_REGOP_SHL, TOK_LESS = TOK_REGOP_SHL, /* @V2.2TSU01 */ TOK_REGOP_SHR, TOK_SM_END, TOK_EOF, TOK_IOPORT, TOK_MMIO, TOK_PIO, TOK_ISA, TOK_VLB, TOK_PCI, TOK_EISA, TOK_PCMCIA, TOK_MCA, TOK_BIG_ENDIAN, TOK_LITTLE_ENDIAN, TOK_QUOTEDSTRING, TOK_MMIO_REG_NAME, TOK_IOPORT_NAME, TOK_PMI_KEYVAR, TOK_SHADOWVRAM, TOK_MINIVDM, /* @V3.1TSU00 */ TOK_FULLVDM, /* @V3.1TSU00 */ TOK_ERROR, /* error */ TOK_PASS } PMITOKEN; typedef struct _TOK { /* tok */ CHAR *tok_txt; PMITOKEN tok_val; } TOK; /* * definitions of bus types. */ #define ISA_BUS 0 /* @V2.2SENJA */ #define VLB_BUS 1 #define PCI_BUS 2 #define EISA_BUS 3 #define PCMCIA_BUS 4 #define MCA_BUS 5 #define BUS_MAX MCA_BUS #endif /* PMIDEF_INCL */ /* * PMI token declarations * PMI_TOKEN_ARRAY should be defined to include the following array. * In this way, this array will not be allocated for every C file. */ #ifdef PMI_TOKEN_ARRAY TOK Tokens[] = { /***************** for backward compatibility ***************/ "[ADAPTERTYPE]", TOK_ADAPTERTYPE, "[CHIPSET]", TOK_CHIPSET, /***************** for backward compatibility ***************/ "[PMIVERSION]", TOK_PMIVERSION, "[COMMENT]", TOK_COMMENT, "[MODEINFO]", TOK_MODEINFO, "[SETMODE]", TOK_SETMODE, "[MONITORMODEINFO]", TOK_MONITORMODEINFO, "[TRAPREGS]", TOK_TRAPREGS, "[UNLOCK]", TOK_UNLOCK, "[LOCK]", TOK_LOCK, "[CLEANUP]", TOK_CLEANUP, "[SETBANK]", TOK_SETBANK, "[GETBANK]", TOK_GETBANK, "[DECLARATIONS]", TOK_DECLARATIONS, "[COPYVRAM]", TOK_COPYVRAM, "[TUNEDISPLAY]", TOK_TUNEDISPLAY, "[SETMEMORYIOADDRESS]",TOK_SETMEMORYIOADDRESS, // @V3.2TSU00 "[HARDWARE]", TOK_HARDWARE, "[IDENTIFYADAPTER]", TOK_IDENTIFYADAPTER, "[ISENGINEBUSY]", TOK_ISENGINEBUSY, "[ENABLECONTROLLER]", TOK_ENABLECONTROLLER, "[DISABLECONTROLLER]",TOK_DISABLECONTROLLER, "[SETMONITORTIMINGS]",TOK_SETMONITORTIMINGS, "INCLUDE", TOK_INCLUDE, /* text include */ "INCLUDECODE", TOK_INCLUDECODE, /* DLL include */ /* * Hardware Section */ "BUSTYPE", TOK_BUSTYPE, "OEMSTRING", TOK_OEMSTRING, "DACSTRING", TOK_DACSTRING, "VERSION", TOK_VERSION, "TOTALMEMORY", TOK_TOTALMEMORY, "MEMORYIOADDRESS", TOK_MEMORYIOADDRESS, "PORTIOADDRESS", TOK_PORTIOADDRESS, "ENDIAN", TOK_ENDIAN, "INT10SETMODE", TOK_INT10SETMODE, /* @V3.1TSU00 */ /* * TrapRegs Section */ "BYTE_IOPORT", TOK_BYTE_IOPORT, "WORD_IOPORT", TOK_WORD_IOPORT, "DWORD_IOPORT", TOK_DWORD_IOPORT, "BYTE_MMIOPORT", TOK_BYTE_MMIOPORT, "WORD_MMIOPORT", TOK_WORD_MMIOPORT, "DWORD_MMIOPORT", TOK_DWORD_MMIOPORT, "RESET", TOK_RESET, "INDEX", TOK_INDEX, "INDEXMASK", TOK_INDEXMASK, "DATAMASK", TOK_DATAMASK, "ACCEL", TOK_ACCEL, "RO", TOK_RO, "WO", TOK_WO, "RW", TOK_RW, /* * ModeInfo Section */ "INT10MODESET", TOK_INT10MODESET, "MODEATTRIBUTES", TOK_MODEATTRIBUTES, "BYTESPERSCANLINE", TOK_BYTESPERSCANLINE, "TEXTROWS", TOK_TEXTROWS, "XRESOLUTION", TOK_XRESOLUTION, "YRESOLUTION", TOK_YRESOLUTION, "XCHARSIZE", TOK_XCHARSIZE, "YCHARSIZE", TOK_YCHARSIZE, "BITSPERPIXEL", TOK_BITSPERPIXEL, "NUMBEROFPLANES", TOK_NUMBEROFPLANES, "PAGELENGTH", TOK_PAGELENGTH, "SAVESIZE", TOK_SAVESIZE, "BUFFERADDRESS", TOK_BUFFERADDRESS, "APERTURESIZE", TOK_APERTURESIZE, "COLORFORMAT", TOK_COLORFORMAT, "COLORWEIGHT", TOK_COLORWEIGHT, /***************** for backward compatibility ***************/ "INTERLACEMODE", TOK_INTERLACEMODE, /***************** for backward compatibility ***************/ "VERTICALREFRESH", TOK_VERTICALREFRESH, "HORIZONTALREFRESH", TOK_HORIZONTALREFRESH, "VPOLARITYPOSITIVE", TOK_VPOLARITYPOSITIVE, "HPOLARITYPOSITIVE", TOK_HPOLARITYPOSITIVE, "SCREENLEFTEDGE", TOK_SCREENLEFTEDGE, "SCREENRIGHTEDGE", TOK_SCREENRIGHTEDGE, "SCREENTOPEDGE", TOK_SCREENTOPEDGE, "SCREENBOTTOMEDGE", TOK_SCREENBOTTOMEDGE, "COLORS", TOK_COLORS, /* @V3.2SEN01 */ /* * PMI Commands */ "INB", TOK_INB, "OUTB", TOK_OUTB, "INW", TOK_INW, "OUTW", TOK_OUTW, "INDW", TOK_INDW, "OUTDW", TOK_OUTDW, "BINB", TOK_BINB, "BOUTB", TOK_BOUTB, "RMWBI", TOK_RMWBI, "RMWBN", TOK_RMWBN, /***************** for backward compatibility ***************/ "RMWB", TOK_RMWBI, "RMWW", TOK_RMWBN, /***************** for backward compatibility ***************/ "RMWWN", TOK_RMWWN, "ABOUTW", TOK_ABOUTW, "ABOUTDW", TOK_ABOUTDW, "IF", TOK_IF, "GOTO", TOK_GOTO, "WHILE", TOK_WHILE, "ENDWHILE", TOK_ENDWHILE, "MEMCMP", TOK_MEMCMP, "STRCMP", TOK_STRCMP, "READB", TOK_READB, /* @V2.2TSU00 */ "READW", TOK_READW, /* Don't rearrange the */ "READDW", TOK_READDW, /* order or put */ "WRITEB", TOK_WRITEB, /* anything in between */ "WRITEW", TOK_WRITEW, /* for these MMIO */ "WRITEDW", TOK_WRITEDW, /* commands */ "CALL", TOK_CALL, /***************** for backward compatibility ***************/ "WAIT", TOK_WAIT, /***************** for backward compatibility ***************/ "WAITB", TOK_WAITB, "WAITW", TOK_WAITW, "WAITDW", TOK_WAITDW, /* * others */ "MMIO", TOK_MMIO, /* used in [Declarations] */ /***************** for backward compatibility ***************/ "P", TOK_MMIO, /* used in [Declarations] */ /***************** for backward compatibility ***************/ "PIO", TOK_PIO, /* */ "ISA", TOK_ISA, "VLB", TOK_VLB, "PCI", TOK_PCI, "EISA", TOK_EISA, "PCMCIA", TOK_PCMCIA, "MCA", TOK_MCA, "SHADOWVRAM", TOK_SHADOWVRAM, "BIG", TOK_BIG_ENDIAN, "LITTLE", TOK_LITTLE_ENDIAN, "MINIVDM", TOK_MINIVDM, /* @V3.1TSU00 */ "FULLVDM", TOK_FULLVDM /* @V3.1TSU00 */ } ; extern TOK Tokens[]; #endif /* PMI_TOKEN_ARRAY */ /* ** PMI subsystem errors */ #define ERROR_ADAPTER_NOT_SUPPORTED ERROR_USER_DEFINED_BASE+0x10 #define ERROR_REFRESH_NOT_SUPPORTED ERROR_USER_DEFINED_BASE+0x11 #define ERROR_MODE_NOT_SUPPORTED ERROR_USER_DEFINED_BASE+0x12 #define ERROR_REQ_SECTION_UNDEFINED ERROR_USER_DEFINED_BASE+0x13 #define ERROR_PMI_FILE_SYNTAX ERROR_USER_DEFINED_BASE+0x14 #define ERROR_NO_MONITOR_SUPPORT ERROR_USER_DEFINED_BASE+0x15 #define ERROR_INVALID_CONFIGURATION ERROR_USER_DEFINED_BASE+0x16 /* @V3.2SEN01 start */ #define ERROR_INADEQUATE_VDM_SUPPORT ERROR_USER_DEFINED_BASE+0x17 #define ERROR_VDM_CREATION_NOT_SHELLPROCESS ERROR_USER_DEFINED_BASE+0x18 #define ERROR_MINIVDM_PROCESSSUPPORTONLY ERROR_USER_DEFINED_BASE+0x19 #define ERROR_INVALID_ADAPTER_EXTENSION ERROR_USER_DEFINED_BASE+0x20 #define ERROR_ADAPTER_STILL_IN_USE ERROR_USER_DEFINED_BASE+0x21 #define ERROR_UPLEVEL_VIDEOPMI ERROR_USER_DEFINED_BASE+0x22 //structure change for cb and ulcolors /* @V3.2SEN01 end */ /* INC */