/* Copyright (C) 2001-2012 Artifex Software, Inc. All Rights Reserved. This software is provided AS-IS with no warranty, either express or implied. This software is distributed under license and may not be copied, modified or distributed except as expressly authorized under the terms of the license contained in the file LICENSE in this distribution. Refer to licensing information at http://www.artifex.com or contact Artifex Software, Inc., 7 Mt. Lassen Drive - Suite A-134, San Rafael, CA 94903, U.S.A., +1(415)492-9861, for further information. */ /* Path drawing procedures for pdfwrite driver */ #include "math_.h" #include "memory_.h" #include "gx.h" #include "gxdevice.h" #include "gxfixed.h" #include "gxistate.h" #include "gxpaint.h" #include "gxcoord.h" #include "gxdevmem.h" #include "gxcolor2.h" #include "gxhldevc.h" #include "gsstate.h" #include "gxstate.h" #include "gserrors.h" #include "gsptype2.h" #include "gsshade.h" #include "gzpath.h" #include "gzcpath.h" #include "gdevpdfx.h" #include "gdevpdfg.h" #include "gdevpdfo.h" #include "gsutil.h" #include "gdevpdtf.h" #include "gdevpdts.h" #include "gxdevsop.h" /* ---------------- Drawing ---------------- */ /* Fill a rectangle. */ int gdev_pdf_fill_rectangle(gx_device * dev, int x, int y, int w, int h, gx_color_index color) { gx_device_pdf *pdev = (gx_device_pdf *) dev; int code; if (pdev->Eps2Write) { float x0, y0, x1, y1; gs_rect *Box; if (!pdev->accumulating_charproc) { Box = &pdev->BBox; x0 = x / (pdev->HWResolution[0] / 72.0); y0 = y / (pdev->HWResolution[1] / 72.0); x1 = x0 + (w / (pdev->HWResolution[0] / 72.0)); y1 = y0 + (h / (pdev->HWResolution[1] / 72.0)); } else { Box = &pdev->charproc_BBox; x0 = (float)x / 100; y0 = (float)y / 100; x1 = x0 + (w / 100); y1 = y0 + (h / 100); } if (Box->p.x > x0) Box->p.x = x0; if (Box->p.y > y0) Box->p.y = y0; if (Box->q.x < x1) Box->q.x = x1; if (Box->q.y < y1) Box->q.y = y1; if (pdev->AccumulatingBBox) return 0; } code = pdf_open_page(pdev, PDF_IN_STREAM); if (code < 0) return code; /* Make sure we aren't being clipped. */ code = pdf_put_clip_path(pdev, NULL); if (code < 0) return code; pdf_set_pure_color(pdev, color, &pdev->saved_fill_color, &pdev->fill_used_process_color, &psdf_set_fill_color_commands); if (!pdev->HaveStrokeColor) pdev->saved_stroke_color = pdev->saved_fill_color; pprintd4(pdev->strm, "%d %d %d %d re f\n", x, y, w, h); return 0; } /* ---------------- Path drawing ---------------- */ /* ------ Vector device implementation ------ */ static int pdf_setlinewidth(gx_device_vector * vdev, double width) { /* Acrobat Reader doesn't accept negative line widths. */ return psdf_setlinewidth(vdev, fabs(width)); } static int pdf_can_handle_hl_color(gx_device_vector * vdev, const gs_imager_state * pis, const gx_drawing_color * pdc) { return pis != NULL; } static int pdf_setfillcolor(gx_device_vector * vdev, const gs_imager_state * pis, const gx_drawing_color * pdc) { gx_device_pdf *const pdev = (gx_device_pdf *)vdev; bool hl_color = (*vdev_proc(vdev, can_handle_hl_color)) (vdev, pis, pdc); const gs_imager_state *pis_for_hl_color = (hl_color ? pis : NULL); if (!pdev->HaveStrokeColor) { /* opdfread.ps assumes same color for stroking and non-stroking operations. */ int code = pdf_set_drawing_color(pdev, pis_for_hl_color, pdc, &pdev->saved_stroke_color, &pdev->stroke_used_process_color, &psdf_set_stroke_color_commands); if (code < 0) return code; } return pdf_set_drawing_color(pdev, pis_for_hl_color, pdc, &pdev->saved_fill_color, &pdev->fill_used_process_color, &psdf_set_fill_color_commands); } static int pdf_setstrokecolor(gx_device_vector * vdev, const gs_imager_state * pis, const gx_drawing_color * pdc) { gx_device_pdf *const pdev = (gx_device_pdf *)vdev; bool hl_color = (*vdev_proc(vdev, can_handle_hl_color)) (vdev, pis, pdc); const gs_imager_state *pis_for_hl_color = (hl_color ? pis : NULL); if (!pdev->HaveStrokeColor) { /* opdfread.ps assumes same color for stroking and non-stroking operations. */ int code = pdf_set_drawing_color(pdev, pis_for_hl_color, pdc, &pdev->saved_fill_color, &pdev->fill_used_process_color, &psdf_set_fill_color_commands); if (code < 0) return code; } return pdf_set_drawing_color(pdev, pis_for_hl_color, pdc, &pdev->saved_stroke_color, &pdev->stroke_used_process_color, &psdf_set_stroke_color_commands); } static int pdf_dorect(gx_device_vector * vdev, fixed x0, fixed y0, fixed x1, fixed y1, gx_path_type_t type) { gx_device_pdf *pdev = (gx_device_pdf *)vdev; fixed xmax = int2fixed(32766), ymax = int2fixed(32766); int bottom = (pdev->ResourcesBeforeUsage ? 1 : 0); fixed xmin = (pdev->sbstack_depth > bottom ? -xmax : 0); fixed ymin = (pdev->sbstack_depth > bottom ? -ymax : 0); /* * If we're doing a stroke operation, expand the checking box by the * stroke width. */ if (type & gx_path_type_stroke) { double w = vdev->state.line_params.half_width; double xw = w * (fabs(vdev->state.ctm.xx) + fabs(vdev->state.ctm.yx)); int d = float2fixed(xw) + fixed_1; xmin -= d; xmax += d; ymin -= d; ymax += d; } if (!(type & gx_path_type_clip) && (x0 > xmax || x1 < xmin || y0 > ymax || y1 < ymin || x0 > x1 || y0 > y1) ) return 0; /* nothing to fill or stroke */ /* * Clamp coordinates to avoid tripping over Acrobat Reader's limit * of 32K on user coordinate values. */ if (x0 < xmin) x0 = xmin; if (x1 > xmax) x1 = xmax; if (y0 < ymin) y0 = ymin; if (y1 > ymax) y1 = ymax; return psdf_dorect(vdev, x0, y0, x1, y1, type); } static int pdf_endpath(gx_device_vector * vdev, gx_path_type_t type) { return 0; /* always handled by caller */ } const gx_device_vector_procs pdf_vector_procs = { /* Page management */ NULL, /* Imager state */ pdf_setlinewidth, psdf_setlinecap, psdf_setlinejoin, psdf_setmiterlimit, psdf_setdash, psdf_setflat, psdf_setlogop, /* Other state */ pdf_can_handle_hl_color, pdf_setfillcolor, pdf_setstrokecolor, /* Paths */ psdf_dopath, pdf_dorect, psdf_beginpath, psdf_moveto, psdf_lineto, psdf_curveto, psdf_closepath, pdf_endpath }; /* ------ Utilities ------ */ /* Store a copy of clipping path. */ int pdf_remember_clip_path(gx_device_pdf * pdev, const gx_clip_path * pcpath) { /* Used for skipping redundant clip paths. SF bug #624168. */ if (pdev->clip_path != 0) { gx_path_free(pdev->clip_path, "pdf clip path"); } if (pcpath == 0) { pdev->clip_path = 0; return 0; } pdev->clip_path = gx_path_alloc(pdev->pdf_memory, "pdf clip path"); if (pdev->clip_path == 0) return_error(gs_error_VMerror); return gx_cpath_to_path((gx_clip_path *)pcpath, pdev->clip_path); } /* Check if same clipping path. */ static int pdf_is_same_clip_path(gx_device_pdf * pdev, const gx_clip_path * pcpath) { /* Used for skipping redundant clip paths. SF bug #624168. */ gs_cpath_enum cenum; gs_path_enum penum; gs_fixed_point vs0[3], vs1[3]; int code, pe_op; if ((pdev->clip_path != 0) != (pcpath != 0)) return 0; /* Both clip paths are empty, so the same */ if (pdev->clip_path == 0) return 1; code = gx_path_enum_init(&penum, pdev->clip_path); if (code < 0) return code; code = gx_cpath_enum_init(&cenum, (gx_clip_path *)pcpath); if (code < 0) return code; /* This flags a warning in Coverity, uninitialised variable cenum.first_visit */ /* This is because gx_cpath_enum_init doesn't initialise first_visit, but the */ /* variable can be used in enum_next. However, this is not truly used this */ /* way. The enum_init sets the 'state' to 'scan', and the first thing that happens */ /* in enum_next when state is 'scan' is to set first_visit. */ while ((code = gx_cpath_enum_next(&cenum, vs0)) > 0) { pe_op = gx_path_enum_next(&penum, vs1); if (pe_op < 0) return pe_op; if (pe_op != code) return 0; switch (pe_op) { case gs_pe_curveto: if (vs0[1].x != vs1[1].x || vs0[1].y != vs1[1].y || vs0[2].x != vs1[2].x || vs0[2].y != vs1[2].y) return 0; case gs_pe_moveto: case gs_pe_lineto: case gs_pe_gapto: if (vs0[0].x != vs1[0].x || vs0[0].y != vs1[0].y) return 0; } } if (code < 0) return code; code = gx_path_enum_next(&penum, vs1); if (code < 0) return code; return (code == 0); } int pdf_check_soft_mask(gx_device_pdf * pdev, gs_imager_state * pis) { int code = 0; if (pis && pdev->state.soft_mask_id != pis->soft_mask_id) { /* * The contents must be open already, so the following will only exit * text or string context. */ code = pdf_open_contents(pdev, PDF_IN_STREAM); if (code < 0) return code; if (pdev->vgstack_depth > pdev->vgstack_bottom) { code = pdf_restore_viewer_state(pdev, pdev->strm); if (code < 0) return code; } } return code; } /* Test whether we will need to put the clipping path. */ bool pdf_must_put_clip_path(gx_device_pdf * pdev, const gx_clip_path * pcpath) { if (pcpath == NULL) { if (pdev->clip_path_id == pdev->no_clip_path_id) return false; } else { if (pdev->clip_path_id == pcpath->id) return false; if (gx_cpath_includes_rectangle(pcpath, fixed_0, fixed_0, int2fixed(pdev->width), int2fixed(pdev->height))) if (pdev->clip_path_id == pdev->no_clip_path_id) return false; if (pdf_is_same_clip_path(pdev, pcpath) > 0) { pdev->clip_path_id = pcpath->id; return false; } } return true; } /* Put a single element of a clipping path list. */ static int pdf_put_clip_path_list_elem(gx_device_pdf * pdev, gx_cpath_path_list *e, gs_path_enum *cenum, gdev_vector_dopath_state_t *state, gs_fixed_point vs[3]) { /* This recursive function provides a reverse order of the list elements. */ int pe_op; if (e->next != NULL) { int code = pdf_put_clip_path_list_elem(pdev, e->next, cenum, state, vs); if (code != 0) return code; } gx_path_enum_init(cenum, &e->path); while ((pe_op = gx_path_enum_next(cenum, vs)) > 0) gdev_vector_dopath_segment(state, pe_op, vs); pprints1(pdev->strm, "%s n\n", (e->rule <= 0 ? "W" : "W*")); if (pe_op < 0) return pe_op; return 0; } /* Put a clipping path on the output file. */ int pdf_put_clip_path(gx_device_pdf * pdev, const gx_clip_path * pcpath) { int code; stream *s = pdev->strm; gs_id new_id; /* Check for no update needed. */ if (pcpath == NULL) { if (pdev->clip_path_id == pdev->no_clip_path_id) return 0; new_id = pdev->no_clip_path_id; } else { if (pdev->clip_path_id == pcpath->id) return 0; new_id = pcpath->id; if (gx_cpath_includes_rectangle(pcpath, fixed_0, fixed_0, int2fixed(pdev->width), int2fixed(pdev->height)) ) { if (pdev->clip_path_id == pdev->no_clip_path_id) return 0; new_id = pdev->no_clip_path_id; } code = pdf_is_same_clip_path(pdev, pcpath); if (code < 0) return code; if (code) { pdev->clip_path_id = new_id; return 0; } } /* * The contents must be open already, so the following will only exit * text or string context. */ code = pdf_open_contents(pdev, PDF_IN_STREAM); if (code < 0) return code; /* Use Q to unwind the old clipping path. */ if (pdev->vgstack_depth > pdev->vgstack_bottom) { code = pdf_restore_viewer_state(pdev, s); if (code < 0) return code; } if (new_id != pdev->no_clip_path_id) { gs_fixed_rect rect; /* Use q to allow the new clipping path to unwind. */ code = pdf_save_viewer_state(pdev, s); if (code < 0) return code; /* path_valid states that the clip path is a simple path. If the clip is an intersection of * two paths, then path_valid is false. The problem is that the rectangle list is the * scan-converted result of the clip, and ths is at the device resolution. Its possible * that the intersection of the clips, at device resolution, is rectangular but the * two paths are not, and that at a different resolution, nor is the intersection. * So we *only* want to write a rectangle, if the clip is rectangular, and its the * result of a simple rectangle. Otherwise we want to write the paths that create * the clip. However, see below about the path_list. */ if (pcpath->path_valid && cpath_is_rectangle(pcpath, &rect)) { /* Use unrounded coordinates. */ pprintg4(s, "%g %g %g %g re", fixed2float(rect.p.x), fixed2float(rect.p.y), fixed2float(rect.q.x - rect.p.x), fixed2float(rect.q.y - rect.p.y)); pprints1(s, " %s n\n", (pcpath->rule <= 0 ? "W" : "W*")); } else { gdev_vector_dopath_state_t state; gs_fixed_point vs[3]; int pe_op; gdev_vector_dopath_init(&state, (gx_device_vector *)pdev, gx_path_type_fill, NULL); /* the comment below is (now) incorrect. Previously in gx_clip_to_rectangle() * we would create a rectangular clip, without using a path to do so. This results * in a rectangular clip, where path_valid is false. However, we did *not* clear * the path_list! So if there had previously been a clip path set, by setting paths, * we did not clear it. This is not sensible, and caused massive confusion for this code * so it has been altered to clear path_list, indicating that there is a clip, * the path is not valid, and that it was not created using arbitrary paths. * In this case we just emit the rectangle as well (there should be only one). */ if (pcpath->path_list == NULL) { /* * We think this should be never executed. * This obsolete branch writes a clip path intersection * as a set of rectangles computed by * gx_cpath_intersect_path_slow. * Those rectangles use coordinates rounded to pixels, * therefore the precision may be unsatisfactory - * see Bug 688407. */ gs_cpath_enum cenum; /* * We have to break 'const' here because the clip path * enumeration logic uses some internal mark bits. * This is very unfortunate, but until we can come up with * a better algorithm, it's necessary. */ gx_cpath_enum_init(&cenum, (gx_clip_path *) pcpath); while ((pe_op = gx_cpath_enum_next(&cenum, vs)) > 0) gdev_vector_dopath_segment(&state, pe_op, vs); pprints1(s, "%s n\n", (pcpath->rule <= 0 ? "W" : "W*")); if (pe_op < 0) return pe_op; } else { gs_path_enum cenum; code = pdf_put_clip_path_list_elem(pdev, pcpath->path_list, &cenum, &state, vs); if (code < 0) return code; } } } pdev->clip_path_id = new_id; return pdf_remember_clip_path(pdev, (pdev->clip_path_id == pdev->no_clip_path_id ? NULL : pcpath)); } /* * Compute the scaling to ensure that user coordinates for a path are within * Acrobat's range. Return true if scaling was needed. In this case, the * CTM will be multiplied by *pscale, and all coordinates will be divided by * *pscale. */ static bool make_rect_scaling(const gx_device_pdf *pdev, const gs_fixed_rect *bbox, double prescale, double *pscale) { double bmin, bmax; bmin = min(bbox->p.x / pdev->scale.x, bbox->p.y / pdev->scale.y) * prescale; bmax = max(bbox->q.x / pdev->scale.x, bbox->q.y / pdev->scale.y) * prescale; if (bmin <= int2fixed(-MAX_USER_COORD) || bmax > int2fixed(MAX_USER_COORD) ) { /* Rescale the path. */ *pscale = max(bmin / int2fixed(-MAX_USER_COORD), bmax / int2fixed(MAX_USER_COORD)); return true; } else { *pscale = 1; return false; } } /* * Prepare a fill with a color anc a clipping path. * Return 1 if there is nothing to paint. * Changes *box to the clipping box. */ static int prepare_fill_with_clip(gx_device_pdf *pdev, const gs_imager_state * pis, gs_fixed_rect *box, bool have_path, const gx_drawing_color * pdcolor, const gx_clip_path * pcpath) { bool new_clip; int code; /* * Check for an empty clipping path. */ if (pcpath) { gs_fixed_rect cbox; gx_cpath_outer_box(pcpath, &cbox); if (cbox.p.x >= cbox.q.x || cbox.p.y >= cbox.q.y) return 1; /* empty clipping path */ *box = cbox; } code = pdf_check_soft_mask(pdev, (gs_imager_state *)pis); if (code < 0) return code; new_clip = pdf_must_put_clip_path(pdev, pcpath); if (have_path || pdev->context == PDF_IN_NONE || new_clip) { if (new_clip) code = pdf_unclip(pdev); else code = pdf_open_page(pdev, PDF_IN_STREAM); if (code < 0) return code; } code = pdf_prepare_fill(pdev, pis); if (code < 0) return code; return pdf_put_clip_path(pdev, pcpath); } /* -------------A local image converter device. -----------------------------*/ public_st_pdf_lcvd_t(); static int lcvd_copy_color_shifted(gx_device * dev, const byte * base, int sourcex, int sraster, gx_bitmap_id id, int x, int y, int w, int h) { pdf_lcvd_t *cvd = (pdf_lcvd_t *)dev; return cvd->std_copy_color((gx_device *)&cvd->mdev, base, sourcex, sraster, id, x - cvd->mdev.mapped_x, y - cvd->mdev.mapped_y, w, h); } static int lcvd_fill_rectangle_shifted(gx_device *dev, int x, int y, int width, int height, gx_color_index color) { pdf_lcvd_t *cvd = (pdf_lcvd_t *)dev; return cvd->std_fill_rectangle((gx_device *)&cvd->mdev, x - cvd->mdev.mapped_x, y - cvd->mdev.mapped_y, width, height, color); } static int lcvd_fill_rectangle_shifted2(gx_device *dev, int x, int y, int width, int height, gx_color_index color) { pdf_lcvd_t *cvd = (pdf_lcvd_t *)dev; int code; code = (*dev_proc(cvd->mask, fill_rectangle))((gx_device *)cvd->mask, x - cvd->mdev.mapped_x, y - cvd->mdev.mapped_y, width, height, (gx_color_index)1); if (code < 0) return code; return cvd->std_fill_rectangle((gx_device *)&cvd->mdev, x - cvd->mdev.mapped_x, y - cvd->mdev.mapped_y, width, height, color); } static void lcvd_get_clipping_box_shifted_from_mdev(gx_device *dev, gs_fixed_rect *pbox) { fixed ofs; pdf_lcvd_t *cvd = (pdf_lcvd_t *)dev; cvd->std_get_clipping_box((gx_device *)&cvd->mdev, pbox); ofs = int2fixed(cvd->mdev.mapped_x); pbox->p.x += ofs; pbox->q.x += ofs; ofs = int2fixed(cvd->mdev.mapped_y); pbox->p.y += ofs; pbox->q.y += ofs; } static int lcvd_dev_spec_op(gx_device *pdev1, int dev_spec_op, void *data, int size) { switch (dev_spec_op) { case gxdso_pattern_shading_area: return 1; /* Request shading area. */ case gxdso_pattern_can_accum: case gxdso_pattern_start_accum: case gxdso_pattern_finish_accum: case gxdso_pattern_load: case gxdso_pattern_is_cpath_accum: case gxdso_pattern_shfill_doesnt_need_path: case gxdso_pattern_handles_clip_path: return 0; } return gx_default_dev_spec_op(pdev1, dev_spec_op, data, size); } static int lcvd_close_device_with_writing(gx_device *pdev) { /* Assuming 'mdev' is being closed before 'mask' - see gx_image3_end_image. */ pdf_lcvd_t *cvd = (pdf_lcvd_t *)pdev; int code, code1; code = pdf_dump_converted_image(cvd->pdev, cvd); code1 = cvd->std_close_device((gx_device *)&cvd->mdev); return code < 0 ? code : code1; } static int write_image(gx_device_pdf *pdev, gx_device_memory *mdev, gs_matrix *m) { gs_image_t image; pdf_image_writer writer; const int sourcex = 0; int code; if (m != NULL) pdf_put_matrix(pdev, NULL, m, " cm\n"); code = pdf_copy_color_data(pdev, mdev->base, sourcex, mdev->raster, gx_no_bitmap_id, 0, 0, mdev->width, mdev->height, &image, &writer, 2); if (code == 1) code = 0; /* Empty image. */ else if (code == 0) code = pdf_do_image(pdev, writer.pres, NULL, true); return code; } static int write_mask(gx_device_pdf *pdev, gx_device_memory *mdev, gs_matrix *m) { const int sourcex = 0; gs_id save_clip_id = pdev->clip_path_id; bool save_skip_color = pdev->skip_colors; int code; if (m != NULL) pdf_put_matrix(pdev, NULL, m, " cm\n"); pdev->clip_path_id = pdev->no_clip_path_id; pdev->skip_colors = true; code = gdev_pdf_copy_mono((gx_device *)pdev, mdev->base, sourcex, mdev->raster, gx_no_bitmap_id, 0, 0, mdev->width, mdev->height, gx_no_color_index, (gx_color_index)0); pdev->clip_path_id = save_clip_id; pdev->skip_colors = save_skip_color; return code; } static void max_subimage_width(int width, byte *base, int x0, long count1, int *x1, long *count) { long c = 0, c1 = count1 - 1; int x = x0; byte p = 1; /* The inverse of the previous bit. */ byte r; /* The inverse of the current bit. */ byte *q = base + (x / 8), m = 0x80 >> (x % 8); for (; x < width; x++) { r = !(*q & m); if (p != r) { if (c >= c1) { if (!r) goto ex; /* stop before the upgrade. */ } c++; } p = r; m >>= 1; if (!m) { m = 0x80; q++; } } if (p) c++; /* Account the last downgrade. */ ex: *count = c; *x1 = x; } static void compute_subimage(int width, int height, int raster, byte *base, int x0, int y0, long MaxClipPathSize, int *x1, int *y1) { int bytes = (width + 7) / 8; /* Returns a semiopen range : [x0:x1)*[y0:y1). */ if (x0 != 0) { long count; /* A partial single scanline. */ max_subimage_width(width, base + y0 * raster, x0, MaxClipPathSize / 4, x1, &count); *y1 = y0; } else { int xx, y = y0, yy; long count, count1 = MaxClipPathSize / 4; for(; y < height && count1 > 0; ) { max_subimage_width(width, base + y * raster, 0, count1, &xx, &count); if (xx < width) { if (y == y0) { /* Partial single scanline. */ *y1 = y + 1; *x1 = xx; return; } else { /* Full lines before this scanline. */ break; } } count1 -= count; yy = y + 1; for (; yy < height; yy++) if (memcmp(base + raster * y, base + raster * yy, bytes)) break; y = yy; } *y1 = y; *x1 = width; } } static int image_line_to_clip(gx_device_pdf *pdev, byte *base, int x0, int x1, int y0, int y1, bool started) { /* returns the number of segments or error code. */ int x = x0, xx; byte *q = base + (x / 8), m = 0x80 >> (x % 8); long c = 0; for (;;) { /* Look for upgrade : */ for (; x < x1; x++) { if (*q & m) break; m >>= 1; if (!m) { m = 0x80; q++; } } if (x == x1) return c; xx = x; /* Look for downgrade : */ for (; x < x1; x++) { if (!(*q & m)) break; m >>= 1; if (!m) { m = 0x80; q++; } } /* Found the interval [xx:x). */ if (!started) { stream_puts(pdev->strm, "n\n"); started = true; } pprintld2(pdev->strm, "%ld %ld m ", xx, y0); pprintld2(pdev->strm, "%ld %ld l ", x, y0); pprintld2(pdev->strm, "%ld %ld l ", x, y1); pprintld2(pdev->strm, "%ld %ld l h\n", xx, y1); c += 4; } return c; } static int mask_to_clip(gx_device_pdf *pdev, int width, int height, int raster, byte *base, int x0, int y0, int x1, int y1) { int y, yy, code = 0, bytes = (width + 7) / 8; bool has_segments = false; for (y = y0; y < y1 && code >= 0;) { yy = y + 1; if (x0 == 0) { for (; yy < y1; yy++) if (memcmp(base + raster * y, base + raster * yy, bytes)) break; } code = image_line_to_clip(pdev, base + raster * y, x0, x1, y, yy, has_segments); if (code > 0) has_segments = true; y = yy; } if (has_segments) stream_puts(pdev->strm, "W n\n"); return code < 0 ? code : has_segments ? 1 : 0; } static int write_subimage(gx_device_pdf *pdev, gx_device_memory *mdev, int x, int y, int x1, int y1) { gs_image_t image; pdf_image_writer writer; /* expand in 1 pixel to provide a proper color interpolation */ int X = max(0, x - 1); int Y = max(0, y - 1); int X1 = min(mdev->width, x1 + 1); int Y1 = min(mdev->height, y1 + 1); int code; code = pdf_copy_color_data(pdev, mdev->base + mdev->raster * Y, X, mdev->raster, gx_no_bitmap_id, X, Y, X1 - X, Y1 - Y, &image, &writer, 2); if (code < 0) return code; if (!writer.pres) return 0; /* inline image. */ return pdf_do_image(pdev, writer.pres, NULL, true); } static int write_image_with_clip(gx_device_pdf *pdev, pdf_lcvd_t *cvd) { int x = 0, y = 0; int code, code1; if (cvd->write_matrix) pdf_put_matrix(pdev, NULL, &cvd->m, " cm q\n"); for(;;) { int x1, y1; compute_subimage(cvd->mask->width, cvd->mask->height, cvd->mask->raster, cvd->mask->base, x, y, max(pdev->MaxClipPathSize, 100), &x1, &y1); code = mask_to_clip(pdev, cvd->mask->width, cvd->mask->height, cvd->mask->raster, cvd->mask->base, x, y, x1, y1); if (code < 0) return code; if (code > 0) { code1 = write_subimage(pdev, &cvd->mdev, x, y, x1, y1); if (code1 < 0) return code1; } if (x1 >= cvd->mdev.width && y1 >= cvd->mdev.height) break; if (code > 0) stream_puts(pdev->strm, "Q q\n"); if (x1 == cvd->mask->width) { x = 0; y = y1; } else { x = x1; y = y1; } } if (cvd->write_matrix) stream_puts(pdev->strm, "Q\n"); return 0; } int pdf_dump_converted_image(gx_device_pdf *pdev, pdf_lcvd_t *cvd) { int code = 0; if (!cvd->path_is_empty || cvd->has_background) { if (!cvd->has_background) stream_puts(pdev->strm, "W n\n"); code = write_image(pdev, &cvd->mdev, (cvd->write_matrix ? &cvd->m : NULL)); cvd->path_is_empty = true; } else if (!cvd->mask_is_empty && pdev->PatternImagemask) { /* Convert to imagemask with a pattern color. */ /* See also use_image_as_pattern in gdevpdfi.c . */ gs_imager_state s; gs_pattern1_instance_t inst; gs_id id = gs_next_ids(cvd->mdev.memory, 1); cos_value_t v; const pdf_resource_t *pres; memset(&s, 0, sizeof(s)); s.ctm.xx = cvd->m.xx; s.ctm.xy = cvd->m.xy; s.ctm.yx = cvd->m.yx; s.ctm.yy = cvd->m.yy; s.ctm.tx = cvd->m.tx; s.ctm.ty = cvd->m.ty; memset(&inst, 0, sizeof(inst)); inst.saved = (gs_state *)&s; /* HACK : will use s.ctm only. */ inst.templat.PaintType = 1; inst.templat.TilingType = 1; inst.templat.BBox.p.x = inst.templat.BBox.p.y = 0; inst.templat.BBox.q.x = cvd->mdev.width; inst.templat.BBox.q.y = cvd->mdev.height; inst.templat.XStep = (float)cvd->mdev.width; inst.templat.YStep = (float)cvd->mdev.height; { pattern_accum_param_s param; param.pinst = (void *)&inst; param.graphics_state = (void *)&s; param.pinst_id = inst.id; code = (*dev_proc(pdev, dev_spec_op))((gx_device *)pdev, gxdso_pattern_start_accum, ¶m, sizeof(pattern_accum_param_s)); } if (code >= 0) { stream_puts(pdev->strm, "W n\n"); code = write_image(pdev, &cvd->mdev, NULL); } pres = pdev->accumulating_substream_resource; if (code >= 0) { pattern_accum_param_s param; param.pinst = (void *)&inst; param.graphics_state = (void *)&s; param.pinst_id = inst.id; code = (*dev_proc(pdev, dev_spec_op))((gx_device *)pdev, gxdso_pattern_finish_accum, ¶m, id); } if (code >= 0) code = (*dev_proc(pdev, dev_spec_op))((gx_device *)pdev, gxdso_pattern_load, &inst, id); if (code >= 0) code = pdf_cs_Pattern_colored(pdev, &v); if (code >= 0) { cos_value_write(&v, pdev); pprintld1(pdev->strm, " cs /R%ld scn ", pdf_resource_id(pres)); } if (code >= 0) code = write_mask(pdev, cvd->mask, (cvd->write_matrix ? &cvd->m : NULL)); cvd->mask_is_empty = true; } else if (!cvd->mask_is_empty && !pdev->PatternImagemask) { /* Convert to image with a clipping path. */ stream_puts(pdev->strm, "q\n"); code = write_image_with_clip(pdev, cvd); stream_puts(pdev->strm, "Q\n"); } if (code > 0) code = (*dev_proc(&cvd->mdev, fill_rectangle))((gx_device *)&cvd->mdev, 0, 0, cvd->mdev.width, cvd->mdev.height, (gx_color_index)0); return code; } static int lcvd_handle_fill_path_as_shading_coverage(gx_device *dev, const gs_imager_state *pis, gx_path *ppath, const gx_fill_params *params, const gx_drawing_color *pdcolor, const gx_clip_path *pcpath) { pdf_lcvd_t *cvd = (pdf_lcvd_t *)dev; gx_device_pdf *pdev = (gx_device_pdf *)cvd->mdev.target; int code; if (cvd->has_background) return 0; if (gx_path_is_null(ppath)) { /* use the mask. */ if (!cvd->path_is_empty) { code = pdf_dump_converted_image(pdev, cvd); if (code < 0) return code; stream_puts(pdev->strm, "Q q\n"); dev_proc(&cvd->mdev, fill_rectangle) = lcvd_fill_rectangle_shifted2; } if (!cvd->mask_is_clean || !cvd->path_is_empty) { code = (*dev_proc(cvd->mask, fill_rectangle))((gx_device *)cvd->mask, 0, 0, cvd->mask->width, cvd->mask->height, (gx_color_index)0); if (code < 0) return code; cvd->mask_is_clean = true; } cvd->path_is_empty = true; cvd->mask_is_empty = false; } else { gs_matrix m; gs_make_translation(cvd->path_offset.x, cvd->path_offset.y, &m); /* use the clipping. */ if (!cvd->mask_is_empty) { code = pdf_dump_converted_image(pdev, cvd); if (code < 0) return code; stream_puts(pdev->strm, "Q q\n"); dev_proc(&cvd->mdev, fill_rectangle) = lcvd_fill_rectangle_shifted; cvd->mask_is_empty = true; } code = gdev_vector_dopath((gx_device_vector *)pdev, ppath, gx_path_type_fill | gx_path_type_optimize, &m); if (code < 0) return code; stream_puts(pdev->strm, "h\n"); cvd->path_is_empty = false; } return 0; } int pdf_setup_masked_image_converter(gx_device_pdf *pdev, gs_memory_t *mem, const gs_matrix *m, pdf_lcvd_t **pcvd, bool need_mask, int x, int y, int w, int h, bool write_on_close) { int code; gx_device_memory *mask = 0; pdf_lcvd_t *cvd = *pcvd; if (cvd == NULL) { cvd = gs_alloc_struct(mem, pdf_lcvd_t, &st_pdf_lcvd_t, "pdf_setup_masked_image_converter"); if (cvd == NULL) return_error(gs_error_VMerror); *pcvd = cvd; } cvd->pdev = pdev; gs_make_mem_device(&cvd->mdev, gdev_mem_device_for_bits(pdev->color_info.depth), mem, 0, (gx_device *)pdev); cvd->mdev.width = w; cvd->mdev.height = h; cvd->mdev.mapped_x = x; cvd->mdev.mapped_y = y; cvd->mdev.bitmap_memory = mem; cvd->mdev.color_info = pdev->color_info; cvd->path_is_empty = true; cvd->mask_is_empty = true; cvd->mask_is_clean = false; cvd->has_background = false; cvd->mask = 0; cvd->write_matrix = true; code = (*dev_proc(&cvd->mdev, open_device))((gx_device *)&cvd->mdev); if (code < 0) return code; code = (*dev_proc(&cvd->mdev, fill_rectangle))((gx_device *)&cvd->mdev, 0, 0, cvd->mdev.width, cvd->mdev.height, (gx_color_index)0); if (code < 0) return code; if (need_mask) { mask = gs_alloc_struct(mem, gx_device_memory, &st_device_memory, "pdf_setup_masked_image_converter"); if (mask == NULL) return_error(gs_error_VMerror); cvd->mask = mask; gs_make_mem_mono_device(mask, mem, (gx_device *)pdev); mask->width = cvd->mdev.width; mask->height = cvd->mdev.height; mask->raster = gx_device_raster((gx_device *)mask, 1); mask->bitmap_memory = mem; code = (*dev_proc(mask, open_device))((gx_device *)mask); if (code < 0) return code; if (write_on_close) { code = (*dev_proc(mask, fill_rectangle))((gx_device *)mask, 0, 0, mask->width, mask->height, (gx_color_index)0); if (code < 0) return code; } } cvd->std_copy_color = dev_proc(&cvd->mdev, copy_color); cvd->std_fill_rectangle = dev_proc(&cvd->mdev, fill_rectangle); cvd->std_close_device = dev_proc(&cvd->mdev, close_device); cvd->std_get_clipping_box = dev_proc(&cvd->mdev, get_clipping_box); if (!write_on_close) { /* Type 3 images will write to the mask directly. */ dev_proc(&cvd->mdev, fill_rectangle) = (need_mask ? lcvd_fill_rectangle_shifted2 : lcvd_fill_rectangle_shifted); dev_proc(&cvd->mdev, get_clipping_box) = lcvd_get_clipping_box_shifted_from_mdev; } else { dev_proc(&cvd->mdev, fill_rectangle) = lcvd_fill_rectangle_shifted; dev_proc(&cvd->mdev, get_clipping_box) = lcvd_get_clipping_box_shifted_from_mdev; } dev_proc(&cvd->mdev, copy_color) = lcvd_copy_color_shifted; dev_proc(&cvd->mdev, dev_spec_op) = lcvd_dev_spec_op; dev_proc(&cvd->mdev, fill_path) = lcvd_handle_fill_path_as_shading_coverage; cvd->m = *m; if (write_on_close) { cvd->mdev.is_open = true; if (mask) mask->is_open = true; dev_proc(&cvd->mdev, close_device) = lcvd_close_device_with_writing; } return 0; } void pdf_remove_masked_image_converter(gx_device_pdf *pdev, pdf_lcvd_t *cvd, bool need_mask) { (*dev_proc(&cvd->mdev, close_device))((gx_device *)&cvd->mdev); if (cvd->mask) { (*dev_proc(cvd->mask, close_device))((gx_device *)cvd->mask); gs_free_object(cvd->mask->memory, cvd->mask, "pdf_remove_masked_image_converter"); } } /* ------ Driver procedures ------ */ /* Fill a path. */ int gdev_pdf_fill_path(gx_device * dev, const gs_imager_state * pis, gx_path * ppath, const gx_fill_params * params, const gx_drawing_color * pdcolor, const gx_clip_path * pcpath) { gx_device_pdf *pdev = (gx_device_pdf *) dev; int code; /* * HACK: we fill an empty path in order to set the clipping path * and the color for writing text. If it weren't for this, we * could detect and skip empty paths before putting out the clip * path or the color. We also clip with an empty path in order * to advance currentpoint for show operations without actually * drawing anything. */ bool have_path; gs_fixed_rect box = {{0, 0}, {0, 0}}, box1; gs_rect box2; if (pdev->Eps2Write) { gx_path_bbox(ppath, &box1); if (box1.p.x != 0 || box1.p.y != 0 || box1.q.x != 0 || box1.q.y != 0){ if (pcpath != 0) rect_intersect(box1, pcpath->outer_box); /* convert fixed point co-ordinates to floating point and account for resolution */ box2.p.x = fixed2int(box1.p.x) / (pdev->HWResolution[0] / 72.0); box2.p.y = fixed2int(box1.p.y) / (pdev->HWResolution[1] / 72.0); box2.q.x = fixed2int(box1.q.x) / (pdev->HWResolution[0] / 72.0); box2.q.y = fixed2int(box1.q.y) / (pdev->HWResolution[1] / 72.0); /* Finally compare the new BBox of the path with the existing EPS BBox */ if (box2.p.x < pdev->BBox.p.x) pdev->BBox.p.x = box2.p.x; if (box2.p.y < pdev->BBox.p.y) pdev->BBox.p.y = box2.p.y; if (box2.q.x > pdev->BBox.q.x) pdev->BBox.q.x = box2.q.x; if (box2.q.y > pdev->BBox.q.y) pdev->BBox.q.y = box2.q.y; } if (pdev->AccumulatingBBox) return 0; } have_path = !gx_path_is_void(ppath); if (!have_path && !pdev->vg_initial_set) { /* See lib/gs_pdfwr.ps about "initial graphic state". */ pdf_prepare_initial_viewer_state(pdev, pis); pdf_reset_graphics(pdev); return 0; } if (have_path) { code = gx_path_bbox(ppath, &box); if (code < 0) return code; } box1 = box; code = prepare_fill_with_clip(pdev, pis, &box, have_path, pdcolor, pcpath); if (code == gs_error_rangecheck) { /* Fallback to the default implermentation for handling a transparency with CompatibilityLevel<=1.3 . */ return gx_default_fill_path((gx_device *)pdev, pis, ppath, params, pdcolor, pcpath); } if (code < 0) return code; if (code == 1) return 0; /* Nothing to paint. */ if (!have_path) return 0; code = pdf_setfillcolor((gx_device_vector *)pdev, pis, pdcolor); if (code == gs_error_rangecheck) { const bool convert_to_image = ((pdev->CompatibilityLevel <= 1.2 || pdev->params.ColorConversionStrategy != ccs_LeaveColorUnchanged) && gx_dc_is_pattern2_color(pdcolor)); if (!convert_to_image) { /* Fallback to the default implermentation for handling a shading with CompatibilityLevel<=1.2 . */ return gx_default_fill_path(dev, pis, ppath, params, pdcolor, pcpath); } else { /* Convert a shading into a bitmap with CompatibilityLevel<=1.2 . */ pdf_lcvd_t cvd, *pcvd = &cvd; int sx, sy; gs_fixed_rect bbox, bbox1; bool need_mask = gx_dc_pattern2_can_overlap(pdcolor); gs_matrix m, save_ctm = ctm_only(pis), ms, msi, mm; gs_int_point rect_size; /* double scalex = 1.9, scaley = 1.4; debug purpose only. */ double scale, scalex, scaley; int log2_scale_x = 0, log2_scale_y = 0; gx_drawing_color dc = *pdcolor; gs_pattern2_instance_t pi = *(gs_pattern2_instance_t *)dc.ccolor.pattern; gs_state *pgs = gs_state_copy(pi.saved, gs_state_memory(pi.saved)); if (pgs == NULL) return_error(gs_error_VMerror); dc.ccolor.pattern = (gs_pattern_instance_t *)π pi.saved = pgs; code = gx_path_bbox(ppath, &bbox); if (code < 0) return code; rect_intersect(bbox, box); code = gx_dc_pattern2_get_bbox(pdcolor, &bbox1); if (code < 0) return code; if (code) rect_intersect(bbox, bbox1); if (bbox.p.x >= bbox.q.x || bbox.p.y >= bbox.q.y) return 0; sx = fixed2int(bbox.p.x); sy = fixed2int(bbox.p.y); gs_make_identity(&m); rect_size.x = fixed2int(bbox.q.x + fixed_half) - sx; rect_size.y = fixed2int(bbox.q.y + fixed_half) - sy; if (rect_size.x == 0 || rect_size.y == 0) return 0; m.tx = (float)sx; m.ty = (float)sy; cvd.path_offset.x = sx; cvd.path_offset.y = sy; scale = (double)rect_size.x * rect_size.y * pdev->color_info.num_components / pdev->MaxShadingBitmapSize; if (scale > 1) { /* This section (together with the call to 'path_scale' below) sets up a downscaling when converting the shading into bitmap. We used floating point numbers to debug it, but in production we prefer to deal only with integers being powers of 2 in order to avoid possible distorsions when scaling paths. */ log2_scale_x = log2_scale_y = ilog2((int)ceil(sqrt(scale))); if ((double)(1 << log2_scale_x) * (1 << log2_scale_y) < scale) log2_scale_y++; if ((double)(1 << log2_scale_x) * (1 << log2_scale_y) < scale) log2_scale_x++; scalex = (double)(1 << log2_scale_x); scaley = (double)(1 << log2_scale_y); rect_size.x = (int)floor(rect_size.x / scalex + 0.5); rect_size.y = (int)floor(rect_size.y / scaley + 0.5); gs_make_scaling(1.0 / scalex, 1.0 / scaley, &ms); gs_make_scaling(scalex, scaley, &msi); gs_matrix_multiply(&msi, &m, &m); gs_matrix_multiply(&ctm_only(pis), &ms, &mm); gs_setmatrix((gs_state *)pis, &mm); gs_matrix_multiply(&ctm_only((gs_imager_state *)pgs), &ms, &mm); gs_setmatrix((gs_state *)pgs, &mm); sx = fixed2int(bbox.p.x / (int)scalex); sy = fixed2int(bbox.p.y / (int)scaley); cvd.path_offset.x = sx; /* m.tx / scalex */ cvd.path_offset.y = sy; } code = pdf_setup_masked_image_converter(pdev, pdev->memory, &m, &pcvd, need_mask, sx, sy, rect_size.x, rect_size.y, false); pcvd->has_background = gx_dc_pattern2_has_background(pdcolor); stream_puts(pdev->strm, "q\n"); if (code >= 0) { code = gdev_vector_dopath((gx_device_vector *)pdev, ppath, gx_path_type_clip, NULL); if (code >= 0) stream_puts(pdev->strm, (params->rule < 0 ? "W n\n" : "W* n\n")); } pdf_put_matrix(pdev, NULL, &cvd.m, " cm q\n"); cvd.write_matrix = false; if (code >= 0) code = gs_shading_do_fill_rectangle(pi.templat.Shading, NULL, (gx_device *)&cvd.mdev, (gs_imager_state *)pgs, !pi.shfill); if (code >= 0) code = pdf_dump_converted_image(pdev, &cvd); stream_puts(pdev->strm, "Q Q\n"); pdf_remove_masked_image_converter(pdev, &cvd, need_mask); gs_setmatrix((gs_state *)pis, &save_ctm); gs_state_free(pgs); return code; } } if (code < 0) return code; { stream *s = pdev->strm; double scale; gs_matrix smat; gs_matrix *psmat = NULL; if (pcpath) { rect_intersect(box1, box); if (box1.p.x > box1.q.x || box1.p.y > box1.q.y) return 0; /* outside the clipping path */ } if (params->flatness != pdev->state.flatness) { pprintg1(s, "%g i\n", params->flatness); pdev->state.flatness = params->flatness; } if (make_rect_scaling(pdev, &box1, 1.0, &scale)) { gs_make_scaling(pdev->scale.x * scale, pdev->scale.y * scale, &smat); pdf_put_matrix(pdev, "q ", &smat, "cm\n"); psmat = &smat; } gdev_vector_dopath((gx_device_vector *)pdev, ppath, gx_path_type_fill | gx_path_type_optimize, psmat); stream_puts(s, (params->rule < 0 ? "f\n" : "f*\n")); if (psmat) stream_puts(s, "Q\n"); } return 0; } /* Stroke a path. */ int gdev_pdf_stroke_path(gx_device * dev, const gs_imager_state * pis, gx_path * ppath, const gx_stroke_params * params, const gx_drawing_color * pdcolor, const gx_clip_path * pcpath) { gx_device_pdf *pdev = (gx_device_pdf *) dev; stream *s; int code; double scale, path_scale; bool set_ctm; gs_matrix mat; double prescale = 1; gs_fixed_rect bbox; if (gx_path_is_void(ppath)) return 0; /* won't mark the page */ code = pdf_check_soft_mask(pdev, (gs_imager_state *)pis); if (code < 0) return code; if (pdf_must_put_clip_path(pdev, pcpath)) code = pdf_unclip(pdev); else if ((pdev->last_charpath_op & TEXT_DO_FALSE_CHARPATH) && ppath->current_subpath && (ppath->last_charpath_segment == ppath->current_subpath->last) && !pdev->ForOPDFRead) { bool hl_color = pdf_can_handle_hl_color((gx_device_vector *)pdev, pis, pdcolor); const gs_imager_state *pis_for_hl_color = (hl_color ? pis : NULL); if (pdf_modify_text_render_mode(pdev->text->text_state, 1)) { /* Set the colour for the stroke */ code = pdf_reset_color(pdev, pis_for_hl_color, pdcolor, &pdev->saved_stroke_color, &pdev->stroke_used_process_color, &psdf_set_stroke_color_commands); if (code == 0) { s = pdev->strm; /* Text is emitted scaled so that the CTM is an identity matrix, the line width * needs to be scaled to match otherwise we will get the default, or the current * width scaled by the CTM before the text, either of which would be wrong. */ scale = 72 / pdev->HWResolution[0]; scale *= pis->ctm.xx; pprintg1(s, "%g w\n", (pis->line_params.half_width * 2) * (float)scale); /* Some trickery here. We have altered the colour, text render mode and linewidth, * we don't want those to persist. By switching to a stream context we will flush the * pending text. This has the beneficial side effect of executing a grestore. So * everything works out neatly. */ code = pdf_open_page(pdev, PDF_IN_STREAM); return(code); } } /* Can only get here if any of the above steps fail, in which case we proceed to * emit the charpath as a normal path, and stroke it. */ code = pdf_open_page(pdev, PDF_IN_STREAM); } else code = pdf_open_page(pdev, PDF_IN_STREAM); if (code < 0) return code; code = pdf_prepare_stroke(pdev, pis); if (code == gs_error_rangecheck) { /* Fallback to the default implermentation for handling a transparency with CompatibilityLevel<=1.3 . */ return gx_default_stroke_path((gx_device *)dev, pis, ppath, params, pdcolor, pcpath); } if (code < 0) return code; code = pdf_put_clip_path(pdev, pcpath); if (code < 0) return code; /* * If the CTM is not uniform, stroke width depends on angle. * We'd like to avoid resetting the CTM, so we check for uniform * CTMs explicitly. Note that in PDF, unlike PostScript, it is * the CTM at the time of the stroke operation, not the CTM at * the time the path was constructed, that is used for transforming * the points of the path; so if we have to reset the CTM, we must * do it before constructing the path, and inverse-transform all * the coordinates. */ set_ctm = (bool)gdev_vector_stroke_scaling((gx_device_vector *)pdev, pis, &scale, &mat); if (set_ctm && ((pis->ctm.xx == 0 && pis->ctm.xy == 0) || (pis->ctm.yx == 0 && pis->ctm.yy == 0))) { /* Acrobat Reader 5 and Adobe Reader 6 issues the "Wrong operand type" error with matrices, which have 3 zero coefs. Besides that, we found that Acrobat Reader 4, Acrobat Reader 5 and Adobe Reader 6 all store the current path in user space and apply CTM in the time of stroking - See the bug 687901. Therefore a precise conversion of Postscript to PDF isn't possible in this case. Adobe viewers render a line with a constant width instead. At last, with set_ctm == true we need the inverse matrix in gdev_vector_dopath. Therefore we exclude projection matrices (see bug 688363). */ set_ctm = false; scale = fabs(pis->ctm.xx + pis->ctm.xy + pis->ctm.yx + pis->ctm.yy) /* Using the non-zero coeff. */ / sqrt(2); /* Empirically from Adobe. */ } if (set_ctm) { /* * We want a scaling factor that will bring the largest reasonable * user coordinate within bounds. We choose a factor based on the * minor axis of the transformation. Thanks to Raph Levien for * the following formula. */ double a = mat.xx, b = mat.xy, c = mat.yx, d = mat.yy; double u = fabs(a * d - b * c); double v = a * a + b * b + c * c + d * d; double minor = (sqrt(v + 2 * u) - sqrt(v - 2 * u)) * 0.5; prescale = (minor == 0 || minor > 1 ? 1 : 1 / minor); } gx_path_bbox(ppath, &bbox); { /* Check whether a painting appears inside the clipping box. Doing so after writing the clipping path due to /SP pdfmark uses a special hack with painting outside the clipping box for synchronizing the clipping path (see lib/gs_pdfwr.ps). That hack appeared because there is no way to pass the imager state through gdev_pdf_put_params, which pdfmark is implemented with. */ gs_fixed_rect clip_box, stroke_bbox = bbox; gs_point d0, d1; gs_fixed_point p0, p1; fixed bbox_expansion_x, bbox_expansion_y; gs_distance_transform(pis->line_params.half_width, 0, &ctm_only(pis), &d0); gs_distance_transform(0, pis->line_params.half_width, &ctm_only(pis), &d1); p0.x = float2fixed(any_abs(d0.x)); p0.y = float2fixed(any_abs(d0.y)); p1.x = float2fixed(any_abs(d1.x)); p1.y = float2fixed(any_abs(d1.y)); bbox_expansion_x = max(p0.x, p1.x) + fixed_1 * 2; bbox_expansion_y = max(p0.y, p1.y) + fixed_1 * 2; stroke_bbox.p.x -= bbox_expansion_x; stroke_bbox.p.y -= bbox_expansion_y; stroke_bbox.q.x += bbox_expansion_x; stroke_bbox.q.y += bbox_expansion_y; gx_cpath_outer_box(pcpath, &clip_box); rect_intersect(stroke_bbox, clip_box); if (stroke_bbox.q.x < stroke_bbox.p.x || stroke_bbox.q.y < stroke_bbox.p.y) return 0; } if (make_rect_scaling(pdev, &bbox, prescale, &path_scale)) { scale /= path_scale; if (set_ctm) gs_matrix_scale(&mat, path_scale, path_scale, &mat); else { gs_make_scaling(path_scale, path_scale, &mat); set_ctm = true; } } code = gdev_vector_prepare_stroke((gx_device_vector *)pdev, pis, params, pdcolor, scale); if (code < 0) return gx_default_stroke_path(dev, pis, ppath, params, pdcolor, pcpath); if (!pdev->HaveStrokeColor) pdev->saved_fill_color = pdev->saved_stroke_color; if (set_ctm) pdf_put_matrix(pdev, "q ", &mat, "cm\n"); code = gdev_vector_dopath((gx_device_vector *)pdev, ppath, gx_path_type_stroke | gx_path_type_optimize, (set_ctm ? &mat : (const gs_matrix *)0)); if (code < 0) return code; s = pdev->strm; stream_puts(s, (code ? "s" : "S")); stream_puts(s, (set_ctm ? " Q\n" : "\n")); if (pdev->Eps2Write) { pdev->AccumulatingBBox++; code = gx_default_stroke_path(dev, pis, ppath, params, pdcolor, pcpath); pdev->AccumulatingBBox--; if (code < 0) return code; } return 0; } /* The fill_rectangle_hl_color device method. See gxdevcli.h about return codes. */ int gdev_pdf_fill_rectangle_hl_color(gx_device *dev, const gs_fixed_rect *rect, const gs_imager_state *pis, const gx_drawing_color *pdcolor, const gx_clip_path *pcpath) { int code; gs_fixed_rect box1 = *rect, box = box1; gx_device_pdf *pdev = (gx_device_pdf *) dev; double scale; gs_matrix smat; gs_matrix *psmat = NULL; const bool convert_to_image = (pdev->CompatibilityLevel <= 1.2 && gx_dc_is_pattern2_color(pdcolor)); if (rect->p.x == rect->q.x) return 0; if (!convert_to_image) { code = prepare_fill_with_clip(pdev, pis, &box, true, pdcolor, pcpath); if (code < 0) return code; if (code == 1) return 0; /* Nothing to paint. */ code = pdf_setfillcolor((gx_device_vector *)pdev, pis, pdcolor); if (code < 0) return code; if (pcpath) rect_intersect(box1, box); if (box1.p.x > box1.q.x || box1.p.y > box1.q.y) return 0; /* outside the clipping path */ if (make_rect_scaling(pdev, &box1, 1.0, &scale)) { gs_make_scaling(pdev->scale.x * scale, pdev->scale.y * scale, &smat); pdf_put_matrix(pdev, "q ", &smat, "cm\n"); psmat = &smat; } pprintg4(pdev->strm, "%g %g %g %g re f\n", fixed2float(box1.p.x) / scale, fixed2float(box1.p.y) / scale, fixed2float(box1.q.x - box1.p.x) / scale, fixed2float(box1.q.y - box1.p.y) / scale); if (psmat) stream_puts(pdev->strm, "Q\n"); if (pdev->Eps2Write) { gs_rect *Box; if (!pdev->accumulating_charproc) Box = &pdev->BBox; else Box = &pdev->charproc_BBox; if (fixed2float(box1.p.x) / (pdev->HWResolution[0] / 72.0) < Box->p.x) Box->p.x = fixed2float(box1.p.x) / (pdev->HWResolution[0] / 72.0); if (fixed2float(box1.p.y) / (pdev->HWResolution[1] / 72.0) < Box->p.y) Box->p.y = fixed2float(box1.p.y) / (pdev->HWResolution[1] / 72.0); if (fixed2float(box1.q.x) / (pdev->HWResolution[0] / 72.0) > Box->q.x) Box->q.x = fixed2float(box1.q.x) / (pdev->HWResolution[0] / 72.0); if (fixed2float(box1.q.y) / (pdev->HWResolution[1] / 72.0) > Box->q.y) Box->q.y = fixed2float(box1.q.y) / (pdev->HWResolution[1] / 72.0); } return 0; } else { gx_fill_params params; gx_path path; params.rule = 1; /* Not important because the path is a rectange. */ params.adjust.x = params.adjust.y = 0; params.flatness = pis->flatness; gx_path_init_local(&path, pis->memory); code = gx_path_add_rectangle(&path, rect->p.x, rect->p.y, rect->q.x, rect->q.y); if (code < 0) return code; code = gdev_pdf_fill_path(dev, pis, &path, ¶ms, pdcolor, pcpath); if (code < 0) return code; gx_path_free(&path, "gdev_pdf_fill_rectangle_hl_color"); return code; } } int gdev_pdf_fillpage(gx_device *dev, gs_imager_state * pis, gx_device_color *pdevc) { gx_device_pdf *pdev = (gx_device_pdf *) dev; int bottom = (pdev->ResourcesBeforeUsage ? 1 : 0); if (gx_dc_pure_color(pdevc) == pdev->white && !is_in_page(pdev) && pdev->sbstack_depth <= bottom) { /* PDF doesn't need to erase the page if its plain white */ return 0; } else return gx_default_fillpage(dev, pis, pdevc); }