/* Copyright (C) 2001-2006 Artifex Software, Inc. All Rights Reserved. This software is provided AS-IS with no warranty, either express or implied. This software is distributed under license and may not be copied, modified or distributed except as expressly authorized under the terms of that license. Refer to licensing information at http://www.artifex.com/ or contact Artifex Software, Inc., 7 Mt. Lassen Drive - Suite A-134, San Rafael, CA 94903, U.S.A., +1(415)492-9861, for further information. */ /* $Id: gdevp14.c 10644 2010-01-26 01:15:46Z mvrhel $ */ /* Compositing devices for implementing PDF 1.4 imaging model */ #include "math_.h" #include "memory_.h" #include "gx.h" #include "gserrors.h" #include "gscdefs.h" #include "gxdevice.h" #include "gsdevice.h" #include "gsstruct.h" #include "gxistate.h" #include "gxdcolor.h" #include "gxiparam.h" #include "gstparam.h" #include "gxblend.h" #include "gxtext.h" #include "gsdfilt.h" #include "gsimage.h" #include "gsrect.h" #include "gscoord.h" #include "gzstate.h" #include "gdevdevn.h" #include "gdevp14.h" #include "gsovrc.h" #include "gxcmap.h" #include "gscolor1.h" #include "gstrans.h" #include "gsutil.h" #include "gxcldev.h" #include "gxclpath.h" #include "gxdcconv.h" #include "vdtrace.h" #include "gscolorbuffer.h" #include "gsptype2.h" #include "gxpcolor.h" #include "gsptype1.h" #include "gzcpath.h" #include "gxpaint.h" /* Visual trace options : set one to 1. */ #define VD_PAINT_MASK 0 #define VD_PAINT_COLORS 0 #define VD_PAINT_ALPHA 1 #if RAW_DUMP unsigned int global_index = 0; unsigned int clist_band_count = 0; #endif /* * We chose the blending color space based upon the process color model of the * output device. For gray, RGB, CMYK, or CMYK+spot devices, the choice is * usually simple. For other devices or if the user is doing custom color * processing then the user may want to control this choice. */ #define AUTO_USE_CUSTOM_BLENDING 0 #define ALWAYS_USE_CUSTOM_BLENDING 1 #define DO_NOT_USE_CUSTOM_BLENDING 2 #define CUSTOM_BLENDING_MODE AUTO_USE_CUSTOM_BLENDING # define INCR(v) DO_NOTHING /* Forward prototypes */ void pdf14_cmyk_cs_to_cmyk_cm(gx_device *, frac, frac, frac, frac, frac *); int gs_pdf14_device_push(gs_memory_t *, gs_imager_state *, gx_device **, gx_device *, const gs_pdf14trans_t *); static int pdf14_tile_pattern_fill(gx_device * pdev, const gs_imager_state * pis, gx_path * ppath, const gx_fill_params * params, const gx_device_color * pdevc, const gx_clip_path * pcpath); static pdf14_mask_t * pdf14_mask_element_new(gs_memory_t * memory); /* Buffer stack data structure */ gs_private_st_ptrs4(st_pdf14_buf, pdf14_buf, "pdf14_buf", pdf14_buf_enum_ptrs, pdf14_buf_reloc_ptrs, saved, data, transfer_fn, maskbuf); gs_private_st_ptrs2(st_pdf14_ctx, pdf14_ctx, "pdf14_ctx", pdf14_ctx_enum_ptrs, pdf14_ctx_reloc_ptrs, stack, maskbuf); gs_private_st_ptrs1(st_pdf14_clr, pdf14_parent_color_t, "pdf14_clr", pdf14_clr_enum_ptrs, pdf14_clr_reloc_ptrs, previous); gs_private_st_ptrs2(st_pdf14_mask, pdf14_mask_t, "pdf_mask", pdf14_mask_enum_ptrs, pdf14_mask_reloc_ptrs, rc_mask, previous); gs_private_st_ptrs1(st_pdf14_rcmask, pdf14_rcmask_t, "pdf_rcmask", pdf14_rcmask_enum_ptrs, pdf14_rcmask_reloc_ptrs, mask_buf); /* ------ The device descriptors ------ */ /* * Default X and Y resolution. */ #define X_DPI 72 #define Y_DPI 72 static int pdf14_open(gx_device * pdev); static dev_proc_close_device(pdf14_close); static int pdf14_output_page(gx_device * pdev, int num_copies, int flush); static dev_proc_put_params(pdf14_put_params); static dev_proc_get_color_comp_index(pdf14_cmykspot_get_color_comp_index); static dev_proc_get_color_mapping_procs(pdf14_cmykspot_get_color_mapping_procs); dev_proc_encode_color(pdf14_encode_color); dev_proc_encode_color(pdf14_compressed_encode_color); dev_proc_decode_color(pdf14_decode_color); dev_proc_decode_color(pdf14_compressed_decode_color); static dev_proc_fill_rectangle(pdf14_fill_rectangle); static dev_proc_fill_rectangle(pdf14_mark_fill_rectangle); static dev_proc_fill_rectangle(pdf14_mark_fill_rectangle_ko_simple); static dev_proc_fill_path(pdf14_fill_path); static dev_proc_copy_mono(pdf14_copy_mono); static dev_proc_stroke_path(pdf14_stroke_path); static dev_proc_begin_typed_image(pdf14_begin_typed_image); static dev_proc_text_begin(pdf14_text_begin); static dev_proc_create_compositor(pdf14_create_compositor); static dev_proc_create_compositor(pdf14_forward_create_compositor); static dev_proc_begin_transparency_group(pdf14_begin_transparency_group); static dev_proc_end_transparency_group(pdf14_end_transparency_group); static dev_proc_begin_transparency_mask(pdf14_begin_transparency_mask); static dev_proc_end_transparency_mask(pdf14_end_transparency_mask); static dev_proc_pattern_manage(pdf14_pattern_manage); static int pdf14_clist_get_param_compressed_color_list(pdf14_device * p14dev); static dev_proc_push_transparency_state(pdf14_push_transparency_state); static dev_proc_pop_transparency_state(pdf14_pop_transparency_state); static const gx_color_map_procs * pdf14_get_cmap_procs(const gs_imager_state *, const gx_device *); static const gx_color_map_procs * pdf14_get_cmap_procs_group(const gs_imager_state *, const gx_device *); #define XSIZE (int)(8.5 * X_DPI) /* 8.5 x 11 inch page, by default */ #define YSIZE (int)(11 * Y_DPI) /* 24-bit color. */ #define pdf14_dev_procs(get_color_mapping_procs, get_color_comp_index, encode_color, decode_color) \ {\ pdf14_open, /* open */\ NULL, /* get_initial_matrix */\ NULL, /* sync_output */\ pdf14_output_page, /* output_page */\ pdf14_close, /* close */\ encode_color, /* rgb_map_rgb_color */\ decode_color, /* gx_default_rgb_map_color_rgb */\ pdf14_fill_rectangle, /* fill_rectangle */\ NULL, /* tile_rectangle */\ pdf14_copy_mono, /* copy_mono */\ NULL, /* copy_color */\ NULL, /* draw_line */\ NULL, /* get_bits */\ NULL, /* get_params */\ pdf14_put_params, /* put_params */\ NULL, /* map_cmyk_color */\ NULL, /* get_xfont_procs */\ NULL, /* get_xfont_device */\ NULL, /* map_rgb_alpha_color */\ NULL, /* get_page_device */\ NULL, /* get_alpha_bits */\ NULL, /* copy_alpha */\ NULL, /* get_band */\ NULL, /* copy_rop */\ pdf14_fill_path, /* fill_path */\ pdf14_stroke_path, /* stroke_path */\ NULL, /* fill_mask */\ NULL, /* fill_trapezoid */\ NULL, /* fill_parallelogram */\ NULL, /* fill_triangle */\ NULL, /* draw_thin_line */\ NULL, /* begin_image */\ NULL, /* image_data */\ NULL, /* end_image */\ NULL, /* strip_tile_rectangle */\ NULL, /* strip_copy_rop, */\ NULL, /* get_clipping_box */\ pdf14_begin_typed_image, /* begin_typed_image */\ NULL, /* get_bits_rectangle */\ NULL, /* map_color_rgb_alpha */\ pdf14_create_compositor, /* create_compositor */\ NULL, /* get_hardware_params */\ pdf14_text_begin, /* text_begin */\ NULL, /* finish_copydevice */\ pdf14_begin_transparency_group,\ pdf14_end_transparency_group,\ pdf14_begin_transparency_mask,\ pdf14_end_transparency_mask,\ NULL, /* discard_transparency_layer */\ get_color_mapping_procs, /* get_color_mapping_procs */\ get_color_comp_index, /* get_color_comp_index */\ encode_color, /* encode_color */\ decode_color, /* decode_color */\ pdf14_pattern_manage, /* pattern_manage */\ NULL, /* fill_rectangle_hl_color */\ NULL, /* include_color_space */\ NULL, /* fill_linear_color_scanline */\ NULL, /* fill_linear_color_trapezoid */\ NULL, /* fill_linear_color_triangle */\ gx_forward_update_spot_equivalent_colors, /* update spot */\ NULL, /* DevN params */\ NULL, /* fill page */\ pdf14_push_transparency_state,\ pdf14_pop_transparency_state\ } static const gx_device_procs pdf14_Gray_procs = pdf14_dev_procs(gx_default_DevGray_get_color_mapping_procs, gx_default_DevGray_get_color_comp_index, pdf14_encode_color, pdf14_decode_color); static const gx_device_procs pdf14_RGB_procs = pdf14_dev_procs(gx_default_DevRGB_get_color_mapping_procs, gx_default_DevRGB_get_color_comp_index, pdf14_encode_color, pdf14_decode_color); static const gx_device_procs pdf14_CMYK_procs = pdf14_dev_procs(gx_default_DevCMYK_get_color_mapping_procs, gx_default_DevCMYK_get_color_comp_index, pdf14_encode_color, pdf14_decode_color); #if USE_COMPRESSED_ENCODING static const gx_device_procs pdf14_CMYKspot_procs = pdf14_dev_procs(pdf14_cmykspot_get_color_mapping_procs, pdf14_cmykspot_get_color_comp_index, pdf14_compressed_encode_color, pdf14_compressed_decode_color); #else static const gx_device_procs pdf14_CMYKspot_procs = pdf14_dev_procs(pdf14_cmykspot_get_color_mapping_procs, pdf14_cmykspot_get_color_comp_index, pdf14_encode_color, pdf14_decode_color); #endif static const gx_device_procs pdf14_custom_procs = pdf14_dev_procs(gx_forward_get_color_mapping_procs, gx_forward_get_color_comp_index, gx_forward_encode_color, gx_forward_decode_color); gs_private_st_composite_use_final(st_pdf14_device, pdf14_device, "pdf14_device", pdf14_device_enum_ptrs, pdf14_device_reloc_ptrs, gx_device_finalize); static int pdf14_put_image(gx_device * dev, gs_imager_state * pis, gx_device * target); static int pdf14_cmykspot_put_image(gx_device * dev, gs_imager_state * pis, gx_device * target); static int pdf14_custom_put_image(gx_device * dev, gs_imager_state * pis, gx_device * target); /* Used to alter device color mapping procs based upon group or softmask color space */ static int pdf14_update_device_color_procs(gx_device *dev, gs_transparency_color_t group_color, gs_imager_state *pis); /* Used to alter device color mapping procs based upon group or softmask color space */ /* Uses color procs stack so that it can be used with clist writer */ static int pdf14_update_device_color_procs_push_c(gx_device *dev, gs_transparency_color_t group_color, gs_imager_state *pis); static int pdf14_update_device_color_procs_pop_c(gx_device *dev, gs_imager_state *pis); static void pdf14_push_parent_color(gx_device *dev, const gs_imager_state *pis); static void pdf14_pop_parent_color(gx_device *dev, const gs_imager_state *pis); static const pdf14_procs_t gray_pdf14_procs = { pdf14_unpack_additive, pdf14_put_image }; static const pdf14_procs_t rgb_pdf14_procs = { pdf14_unpack_additive, pdf14_put_image }; static const pdf14_procs_t cmyk_pdf14_procs = { pdf14_unpack_subtractive, pdf14_put_image }; static const pdf14_procs_t cmykspot_pdf14_procs = { pdf14_unpack_compressed, pdf14_cmykspot_put_image }; static const pdf14_procs_t custom_pdf14_procs = { pdf14_unpack_custom, pdf14_custom_put_image }; static const pdf14_nonseparable_blending_procs_t gray_blending_procs = { art_blend_luminosity_custom_8, art_blend_saturation_custom_8 }; static const pdf14_nonseparable_blending_procs_t rgb_blending_procs = { art_blend_luminosity_rgb_8, art_blend_saturation_rgb_8 }; static const pdf14_nonseparable_blending_procs_t cmyk_blending_procs = { art_blend_luminosity_cmyk_8, art_blend_saturation_cmyk_8 }; static const pdf14_nonseparable_blending_procs_t custom_blending_procs = { art_blend_luminosity_custom_8, art_blend_saturation_custom_8 }; const pdf14_device gs_pdf14_Gray_device = { std_device_std_color_full_body_type(pdf14_device, &pdf14_Gray_procs, "pdf14gray", &st_pdf14_device, XSIZE, YSIZE, X_DPI, Y_DPI, 8, 0, 0, 0, 0, 0, 0), { 0 }, /* Procs */ NULL, /* target */ { 0 }, /* devn_params - not used */ &gray_pdf14_procs, &gray_blending_procs }; const pdf14_device gs_pdf14_RGB_device = { std_device_color_stype_body(pdf14_device, &pdf14_RGB_procs, "pdf14RGB", &st_pdf14_device, XSIZE, YSIZE, X_DPI, Y_DPI, 24, 255, 256), { 0 }, /* Procs */ NULL, /* target */ { 0 }, /* devn_params - not used */ &rgb_pdf14_procs, &rgb_blending_procs }; const pdf14_device gs_pdf14_CMYK_device = { std_device_std_color_full_body_type(pdf14_device, &pdf14_CMYK_procs, "pdf14cmyk", &st_pdf14_device, XSIZE, YSIZE, X_DPI, Y_DPI, 32, 0, 0, 0, 0, 0, 0), { 0 }, /* Procs */ NULL, /* target */ { 0 }, /* devn_params - not used */ &cmyk_pdf14_procs, &cmyk_blending_procs }; const pdf14_device gs_pdf14_CMYKspot_device = { std_device_part1_(pdf14_device, &pdf14_CMYKspot_procs, "pdf14cmykspot", &st_pdf14_device, open_init_closed), dci_values(GX_DEVICE_COLOR_MAX_COMPONENTS,64,255,255,256,256), std_device_part2_(XSIZE, YSIZE, X_DPI, Y_DPI), offset_margin_values(0, 0, 0, 0, 0, 0), std_device_part3_(), { 0 }, /* Procs */ NULL, /* target */ /* DeviceN parameters */ { 8, /* Not used - Bits per color */ DeviceCMYKComponents, /* Names of color model colorants */ 4, /* Number colorants for CMYK */ 0, /* MaxSeparations has not been specified */ -1, /* PageSpotColors has not been specified */ {0}, /* SeparationNames */ 0, /* SeparationOrder names */ {0, 1, 2, 3, 4, 5, 6, 7 } /* Initial component SeparationOrder */ }, &cmykspot_pdf14_procs, &cmyk_blending_procs }; /* * The 'custom' PDF 1.4 compositor device is for working with those devices * which support spot colors but do not have a CMYK process color model. * * This causes some problems with the Hue, Saturation, Color, and Luminosity * blending modes. These blending modes are 'non separable' and depend upon * knowing the details of the blending color space. However we use the * process color model of the output device for our blending color space. * With an unknown process color model, we have to fall back to some 'guesses' * about how to treat these blending modes. */ const pdf14_device gs_pdf14_custom_device = { std_device_part1_(pdf14_device, &pdf14_custom_procs, "pdf14custom", &st_pdf14_device, open_init_closed), dci_values(GX_DEVICE_COLOR_MAX_COMPONENTS,64,255,255,256,256), std_device_part2_(XSIZE, YSIZE, X_DPI, Y_DPI), offset_margin_values(0, 0, 0, 0, 0, 0), std_device_part3_(), { 0 }, /* Procs */ NULL, /* target */ /* DeviceN parameters */ { 8, /* Not used - Bits per color */ DeviceCMYKComponents, /* Names of color model colorants */ 4, /* Number colorants for CMYK */ 0, /* MaxSeparations has not been specified */ -1, /* PageSpotColors has not been specified */ {0}, /* SeparationNames */ 0, /* SeparationOrder names */ {0, 1, 2, 3, 4, 5, 6, 7 } /* Initial component SeparationOrder */ }, &custom_pdf14_procs, &custom_blending_procs }; /* GC procedures */ static ENUM_PTRS_WITH(pdf14_device_enum_ptrs, pdf14_device *pdev) { index -= 4; if (index < pdev->devn_params.separations.num_separations) ENUM_RETURN(pdev->devn_params.separations.names[index].data); index -= pdev->devn_params.separations.num_separations; if (index < pdev->devn_params.pdf14_separations.num_separations) ENUM_RETURN(pdev->devn_params.pdf14_separations.names[index].data); return 0; } case 0: return ENUM_OBJ(pdev->ctx); case 1: return ENUM_OBJ(pdev->trans_group_parent_cmap_procs); case 2: ENUM_RETURN(gx_device_enum_ptr(pdev->target)); case 3: ENUM_RETURN(pdev->devn_params.compressed_color_list); ENUM_PTRS_END static RELOC_PTRS_WITH(pdf14_device_reloc_ptrs, pdf14_device *pdev) { { int i; for (i = 0; i < pdev->devn_params.separations.num_separations; ++i) { RELOC_PTR(pdf14_device, devn_params.separations.names[i].data); } } RELOC_PTR(pdf14_device, devn_params.compressed_color_list); RELOC_VAR(pdev->ctx); RELOC_VAR(pdev->trans_group_parent_cmap_procs); pdev->target = gx_device_reloc_ptr(pdev->target, gcst); } RELOC_PTRS_END /* ------ Private definitions ------ */ /** * pdf14_buf_new: Allocate a new PDF 1.4 buffer. * @n_chan: Number of pixel channels including alpha. * * Return value: Newly allocated buffer, or NULL on failure. **/ static pdf14_buf * pdf14_buf_new(gs_int_rect *rect, bool has_alpha_g, bool has_shape, bool idle, int n_chan, gs_memory_t *memory) { /* Note that alpha_g is the alpha for the GROUP */ /* This is distinct from the alpha that may also exist */ /* for the objects within the group. Hence it can introduce */ /* yet another plane */ pdf14_buf *result; int rowstride = (rect->q.x - rect->p.x + 3) & -4; int height = (rect->q.y - rect->p.y); int n_planes = n_chan + (has_shape ? 1 : 0) + (has_alpha_g ? 1 : 0); int planestride; double dsize = (((double) rowstride) * height) * n_planes; if (dsize > (double)max_uint) return NULL; result = gs_alloc_struct(memory, pdf14_buf, &st_pdf14_buf, "pdf14_buf_new"); if (result == NULL) return result; result->saved = NULL; result->isolated = false; result->knockout = false; result->has_alpha_g = has_alpha_g; result->has_shape = has_shape; result->rect = *rect; result->n_chan = n_chan; result->n_planes = n_planes; result->rowstride = rowstride; result->transfer_fn = NULL; result->maskbuf = NULL; result->idle = idle; result->mask_id = 0; result->parent_color_info_procs.get_cmap_procs = NULL; result->parent_color_info_procs.parent_color_mapping_procs = NULL; result->parent_color_info_procs.parent_color_comp_index = NULL; if (height <= 0 || idle) { /* Empty clipping - will skip all drawings. */ result->planestride = 0; result->data = 0; } else { planestride = rowstride * height; result->planestride = planestride; result->data = gs_alloc_bytes(memory, planestride * n_planes, "pdf14_buf_new"); if (result->data == NULL) { gs_free_object(memory, result, "pdf_buf_new"); return NULL; } if (has_alpha_g) { int alpha_g_plane = n_chan + (has_shape ? 1 : 0); memset (result->data + alpha_g_plane * planestride, 0, planestride); } } /* Initialize bbox with the reversed rectangle for further accumulation : */ result->bbox.p.x = rect->q.x; result->bbox.p.y = rect->q.y; result->bbox.q.x = rect->p.x; result->bbox.q.y = rect->p.y; return result; } static void pdf14_buf_free(pdf14_buf *buf, gs_memory_t *memory) { gs_free_object(memory, buf->maskbuf, "pdf14_buf_free"); gs_free_object(memory, buf->transfer_fn, "pdf14_buf_free"); gs_free_object(memory, buf->data, "pdf14_buf_free"); gs_free_object(memory, buf, "pdf14_buf_free"); } static void rc_pdf14_maskbuf_free(gs_memory_t * mem, void *ptr_in, client_name_t cname) { /* Ending the mask buffer. */ pdf14_rcmask_t *rcmask = (pdf14_rcmask_t * ) ptr_in; /* free the pdf14 buffer. */ if ( rcmask->mask_buf != NULL ){ pdf14_buf_free(rcmask->mask_buf, mem); } gs_free_object(mem, rcmask, "rc_pdf14_maskbuf_free"); } static pdf14_rcmask_t * pdf14_rcmask_new(gs_memory_t *memory) { pdf14_rcmask_t *result; result = gs_alloc_struct(memory, pdf14_rcmask_t, &st_pdf14_rcmask, "pdf14_maskbuf_new"); if ( result == NULL ) return(NULL); rc_init_free(result, memory, 1, rc_pdf14_maskbuf_free); result->mask_buf = NULL; result->memory = memory; return(result); } static pdf14_ctx * pdf14_ctx_new(gs_int_rect *rect, int n_chan, bool additive, gs_memory_t *memory) { pdf14_ctx *result; pdf14_buf *buf; result = gs_alloc_struct(memory, pdf14_ctx, &st_pdf14_ctx, "pdf14_ctx_new"); if (result == NULL) return result; /* Note: buffer creation expects alpha to be in number of channels */ buf = pdf14_buf_new(rect, false, false, false, n_chan+1, memory); if (buf == NULL) { gs_free_object(memory, result, "pdf14_ctx_new"); return NULL; } if_debug3('v', "[v]base buf: %d x %d, %d channels\n", buf->rect.q.x, buf->rect.q.y, buf->n_chan); if (buf->data != NULL) memset(buf->data, 0, buf->planestride * buf->n_planes); buf->saved = NULL; result->stack = buf; result->maskbuf = pdf14_mask_element_new(memory); result->n_chan = n_chan; result->memory = memory; result->rect = *rect; result->additive = additive; return result; } static void pdf14_ctx_free(pdf14_ctx *ctx) { pdf14_buf *buf, *next; if (ctx->maskbuf) { /* A mask was created but was not used in this band. */ rc_decrement(ctx->maskbuf->rc_mask, "pdf14_ctx_free"); } for (buf = ctx->stack; buf != NULL; buf = next) { next = buf->saved; pdf14_buf_free(buf, ctx->memory); } gs_free_object (ctx->memory, ctx, "pdf14_ctx_free"); } /** * pdf14_find_backdrop_buf: Find backdrop buffer. * * Return value: Backdrop buffer for current group operation, or NULL * if backdrop is fully transparent. **/ static pdf14_buf * pdf14_find_backdrop_buf(pdf14_ctx *ctx) { pdf14_buf *buf = ctx->stack; while (buf != NULL) { if (buf->isolated) return NULL; if (!buf->knockout) return buf->saved; buf = buf->saved; } /* this really shouldn't happen, as bottom-most buf should be non-knockout */ return NULL; } static int pdf14_push_transparency_group(pdf14_ctx *ctx, gs_int_rect *rect, bool isolated, bool knockout, byte alpha, byte shape, gs_blend_mode_t blend_mode, bool idle, uint mask_id, int numcomps) { pdf14_buf *tos = ctx->stack; pdf14_buf *buf, *backdrop; bool has_shape; if_debug1('v', "[v]pdf14_push_transparency_group, idle = %d\n", idle); /* todo: fix this hack, which makes all knockout groups isolated. For the vast majority of files, there won't be any visible effects, but it still isn't correct. The pixel compositing code for non-isolated knockout groups gets pretty hairy, which is why this is here. */ if (knockout) isolated = true; has_shape = tos->has_shape || tos->knockout; /* We need to create this based upon the size of the color space + an alpha channel. NOT the device size or the previous ctx size. */ /* The second parameter in pdf14_buf_new decides if we should add a GROUP alpha channel to the buffer. If it is NOT isolated, then this buffer will be added. If it is isolated, then the buffer will not be added. I question the redundancy here of the alpha and the group alpha channel, but that will need to be looked at later. */ buf = pdf14_buf_new(rect, !isolated, has_shape, idle, numcomps+1, ctx->memory); if_debug3('v', "[v]push buf: %d x %d, %d channels\n", buf->rect.q.x - buf->rect.p.x, buf->rect.q.y - buf->rect.p.y, buf->n_chan); if (buf == NULL) return_error(gs_error_VMerror); buf->isolated = isolated; buf->knockout = knockout; buf->alpha = alpha; buf->shape = shape; buf->blend_mode = blend_mode; buf->mask_id = mask_id; buf->maskbuf = ctx->maskbuf; /* Save becasuse the group rendering may set up another (nested) mask. */ ctx->maskbuf = NULL; /* Clean the mask field for rendering this group. See pdf14_pop_transparency_group how to handle it. */ buf->saved = tos; ctx->stack = buf; if (buf->data == NULL) return 0; if (idle) return 0; backdrop = pdf14_find_backdrop_buf(ctx); if (backdrop == NULL) memset(buf->data, 0, buf->planestride * (buf->n_chan + (buf->has_shape ? 1 : 0))); else pdf14_preserve_backdrop(buf, tos, has_shape); #if RAW_DUMP /* Dump the current buffer to see what we have. */ dump_raw_buffer(ctx->stack->rect.q.y-ctx->stack->rect.p.y, ctx->stack->rowstride, ctx->stack->n_planes, ctx->stack->planestride, ctx->stack->rowstride, "TransGroupPush",ctx->stack->data); global_index++; #endif return 0; } static int pdf14_pop_transparency_group(pdf14_ctx *ctx, const pdf14_nonseparable_blending_procs_t * pblend_procs, int curr_num_color_comp) { pdf14_buf *tos = ctx->stack; pdf14_buf *nos = tos->saved; pdf14_mask_t *mask_stack = tos->maskbuf; pdf14_buf *maskbuf; int x0, x1, y0, y1; byte *new_data_buf; int num_noncolor_planes, new_num_planes; if ( mask_stack == NULL) { maskbuf = NULL; } else { maskbuf = mask_stack->rc_mask->mask_buf; } if (nos == NULL) return_error(gs_error_rangecheck); y0 = max(tos->rect.p.y, nos->rect.p.y); y1 = min(tos->rect.q.y, nos->rect.q.y); x0 = max(tos->rect.p.x, nos->rect.p.x); x1 = min(tos->rect.q.x, nos->rect.q.x); if (ctx->maskbuf) { /* This can occur when we have a situation where we are ending out of a group that has internal to it a soft mask and another group. The soft mask left over from the previous trans group pop is put into ctx->masbuf, since it is still active if another trans group push occurs to use it. If one does not occur, but instead we find ourselves popping from a parent group, then this softmask is no longer needed. We will rc_decrement and set it to NULL. */ rc_decrement(ctx->maskbuf->rc_mask, "pdf14_pop_transparency_group"); if (ctx->maskbuf->rc_mask == NULL ){ gs_free_object(ctx->memory, ctx->maskbuf, "pdf14_pop_transparency_group"); } ctx->maskbuf = NULL; } ctx->maskbuf = mask_stack; /* Restore the mask saved by pdf14_push_transparency_group. */ tos->maskbuf = NULL; /* Clean the pointer sinse the mask ownership is now passed to ctx. */ if (tos->idle) goto exit; if (maskbuf != NULL && maskbuf->data == NULL && maskbuf->alpha == 255) goto exit; if (maskbuf != NULL) { y0 = max(y0, maskbuf->rect.p.y); y1 = min(y1, maskbuf->rect.q.y); x0 = max(x0, maskbuf->rect.p.x); x1 = min(x1, maskbuf->rect.q.x); } #if RAW_DUMP /* Dump the current buffer to see what we have. */ dump_raw_buffer(ctx->stack->rect.q.y-ctx->stack->rect.p.y, ctx->stack->rowstride, ctx->stack->n_planes, ctx->stack->planestride, ctx->stack->rowstride, "Trans_Group_Pop",ctx->stack->data); #endif /* If the color spaces are different and we actually did do a swap of the procs for color */ if(nos->parent_color_info_procs.num_components != curr_num_color_comp && nos->parent_color_info_procs.parent_color_mapping_procs != NULL){ if (x0 < x1 && y0 < y1) { /* The NOS blending color space is different than that of the TOS. It is necessary to transform the TOS buffer data to the color space of the NOS prior to doing the pdf14_compose_group operation. For now we are going to do very generic transformations. This will be replaced when we bring in the updated color flow. */ /* Allocate the new buffer. If the number of channels in the the new color space was less than or equal to the previous one, we could reuse. Save that for a later optimization. */ num_noncolor_planes = tos->n_planes - curr_num_color_comp; new_num_planes = num_noncolor_planes + nos->parent_color_info_procs.num_components; new_data_buf = gs_alloc_bytes(ctx->memory, tos->planestride*new_num_planes, "pdf14_buf_new"); if (new_data_buf == NULL) return_error(gs_error_VMerror); /* Initialize with 0. Need to double check about this... may need to do some adjustments for the shape etc plane */ /* i.e. copy over those planes that exist beyond the count of the number of color components */ memset(new_data_buf, 0, tos->planestride*new_num_planes); /* Go ahead and do the conversion on the buffer */ /* later this will be replaced by gscms_transform_color_buffer */ /* This simple function is for planar data only. */ gs_transform_color_buffer_generic(tos->data,tos->rowstride,tos->planestride, curr_num_color_comp,tos->rect,new_data_buf,nos->parent_color_info_procs.num_components,num_noncolor_planes); /* Free the old object */ gs_free_object(ctx->memory, tos->data, "pdf14_buf_free"); tos->data = new_data_buf; /* Adjust the plane and channel size now */ tos->n_chan = nos->n_chan; tos->n_planes = nos->n_planes; #if RAW_DUMP /* Dump the current buffer to see what we have. */ dump_raw_buffer(ctx->stack->rect.q.y-ctx->stack->rect.p.y, ctx->stack->rowstride, ctx->stack->n_planes, ctx->stack->planestride, ctx->stack->rowstride, "Trans_Group_ColorConv",ctx->stack->data); #endif /* compose */ pdf14_compose_group(tos, nos, maskbuf, x0, x1, y0, y1, nos->n_chan, nos->parent_color_info_procs.isadditive, nos->parent_color_info_procs.parent_blending_procs); } } else { if (x0 < x1 && y0 < y1) pdf14_compose_group(tos, nos, maskbuf, x0, x1, y0, y1,nos->n_chan, ctx->additive, pblend_procs); } exit: ctx->stack = nos; { /* If this group is one for an image with soft mask, the containing group's mask was saved in maskbuf->maskbuf. Set up it now to the transparensy context as undiong the save action done in pdf14_push_transparency_mask when replacing==false; */ /* ctx->maskbuf = (maskbuf != NULL ? maskbuf->maskbuf : NULL); */ } if_debug1('v', "[v]pop buf, idle=%d\n", tos->idle); pdf14_buf_free(tos, ctx->memory); return 0; } /* * Create a transparency mask that will be used as the mask for * the next transparency group that is created afterwards. * The sequence of calls is: * push_mask, draw the mask, pop_mask, push_group, draw the group, pop_group */ static int pdf14_push_transparency_mask(pdf14_ctx *ctx, gs_int_rect *rect, byte bg_alpha, byte *transfer_fn, bool idle, bool replacing, uint mask_id, gs_transparency_mask_subtype_t subtype, bool SMask_is_CIE, int numcomps, int Background_components, const float Background[], const float GrayBackground) { pdf14_buf *buf; unsigned char *curr_ptr; int k; unsigned char background_init; if_debug2('v', "[v]pdf14_push_transparency_mask, idle=%d, replacing=%d\n", idle, replacing); #if 0 if (replacing && ctx->maskbuf != NULL) { if (ctx->maskbuf->maskbuf != NULL) { /* Pass here when a mask of an image is being replaced with the containing group's mask. It looks as the image's mask covers some band, but the image itself does not. We believe it must not happen, but provide a cleanup for safety. */ pdf14_buf_free(ctx->maskbuf->maskbuf, ctx->memory); } pdf14_buf_free(ctx->maskbuf, ctx->memory); ctx->maskbuf = NULL; } #endif /* An optimization to consider is that if the SubType is Alpha then we really should only be allocating the alpha band and only draw with that channel. Current architecture makes that a bit tricky. We need to create this based upon the size of the color space + an alpha channel. NOT the device size or the previous ctx size */ buf = pdf14_buf_new(rect, false, false, idle, numcomps+1, ctx->memory); if (buf == NULL) return_error(gs_error_VMerror); buf->alpha = bg_alpha; /* fill in, but these values aren't really used */ buf->isolated = true; buf->knockout = false; buf->shape = 0xff; buf->blend_mode = BLEND_MODE_Normal; buf->transfer_fn = transfer_fn; buf->mask_id = mask_id; { /* If replacing=false, we start the mask for an image with SMask. In this case the image's SMask temporary replaces the mask of the containing group. Save the containing droup's mask in buf->maskbuf */ buf->maskbuf = ctx->maskbuf; if (buf->maskbuf){ rc_increment(buf->maskbuf->rc_mask); } } #if RAW_DUMP /* Dump the current buffer to see what we have. */ if (ctx->stack->planestride > 0 ){ dump_raw_buffer(ctx->stack->rect.q.y-ctx->stack->rect.p.y, ctx->stack->rowstride, ctx->stack->n_planes, ctx->stack->planestride, ctx->stack->rowstride, "Raw_Buf_PreSmask",ctx->stack->data); global_index++; } #endif buf->saved = ctx->stack; ctx->stack = buf; /* Soft Mask related information so we know how to compute luminosity when we pop the soft mask */ buf->SMask_is_CIE = SMask_is_CIE; buf->SMask_SubType = subtype; if (buf->data != NULL){ /* We need to initialize it to the BC if it existed */ /* According to the spec, the CS has to be the same */ /* If the back ground component is black, then don't bother with this */ if ( Background_components && GrayBackground != 0.0 ) { curr_ptr = buf->data; for (k = 0; k < Background_components; k++) { background_init = (unsigned char) (255.0 * Background[k]); memset(curr_ptr, background_init, buf->planestride); curr_ptr += buf->planestride; } /* If we have a background component that was not black, then we need to set the alpha for this mask as if we had drawn in the entire soft mask buffer */ memset(curr_ptr, 255, buf->planestride * (buf->n_chan - Background_components)); } else { /* Compose mask with opaque background */ memset(buf->data, 0, buf->planestride * buf->n_chan); } } return 0; } static int pdf14_pop_transparency_mask(pdf14_ctx *ctx) { pdf14_buf *tos = ctx->stack; byte *new_data_buf; if_debug1('v', "[v]pdf14_pop_transparency_mask, idle=%d\n", tos->idle); ctx->stack = tos->saved; tos->saved = NULL; /* To avoid issues with GC */ if (tos->maskbuf) { /* During the soft mask push, the maskbuf was copied (not moved) from the ctx to the tos maskbuf. We are done with this now so it is safe to just set to NULL. However, before we do that we must perform rc decrement to match the increment that occured was made. Also, if this is the last ref count of the rc_mask, we should free the buffer now since no other groups need it. */ rc_decrement(tos->maskbuf->rc_mask, "pdf14_pop_transparency_mask(tos->maskbuf->rc_mask)"); if (tos->maskbuf->rc_mask) { if (tos->maskbuf->rc_mask->rc.ref_count == 1){ rc_decrement(tos->maskbuf->rc_mask, "pdf14_pop_transparency_mask(tos->maskbuf->rc_mask)"); } } tos->maskbuf = NULL; } if (tos->data == NULL ) { /* This can occur in clist rendering if the soft mask does not intersect the current band. It would be nice to catch this earlier and just avoid creating the structure to begin with. For now we need to delete the structure that was created. Only delete if the alpha value is not 255 */ if (tos->alpha == 255) { pdf14_buf_free(tos, ctx->memory); ctx->maskbuf = NULL; } else { /* Assign as mask buffer */ ctx->maskbuf = pdf14_mask_element_new(ctx->memory); ctx->maskbuf->rc_mask->mask_buf = tos; } } else { /* Lets get this to a monochrome buffer and map it to a luminance only value */ /* This will reduce our memory. We won't reuse the existing one, due */ /* Due to the fact that on certain systems we may have issues recovering */ /* the data after a resize */ new_data_buf = gs_alloc_bytes(ctx->memory, tos->planestride, "pdf14_buf_new"); if (new_data_buf == NULL) return_error(gs_error_VMerror); /* Initialize with 0. Need to do this since in Smask_Luminosity_Mapping we won't be filling everything during the remap if it had not been written into by the PDF14 fill rect */ memset(new_data_buf, 0, tos->planestride); Smask_Luminosity_Mapping(tos->rect.q.y - tos->rect.p.y ,tos->rect.q.x - tos->rect.p.x,tos->n_chan, tos->rowstride, tos->planestride, new_data_buf, tos->data, ctx->additive, tos->SMask_is_CIE, tos->SMask_SubType); /* Free the old object, NULL test was above */ gs_free_object(ctx->memory, tos->data, "pdf14_buf_free"); tos->data = new_data_buf; /* Data is single channel now */ tos->n_chan = 1; tos->n_planes = 1; /* Assign as reference counted mask buffer */ ctx->maskbuf = pdf14_mask_element_new(ctx->memory); ctx->maskbuf->rc_mask->mask_buf = tos; } return 0; } static pdf14_mask_t * pdf14_mask_element_new(gs_memory_t *memory) { pdf14_mask_t *result; result = gs_alloc_struct(memory, pdf14_mask_t, &st_pdf14_mask, "pdf14_mask_element_new"); /* Get the reference counted mask */ result->rc_mask = pdf14_rcmask_new(memory); result->previous = NULL; result->memory = memory; return(result); } static int pdf14_push_transparency_state(gx_device *dev, gs_imager_state *pis) { /* We need to push the current soft mask. We need to be able to recover it if we draw a new one and then obtain a Q operation ( a pop ) */ pdf14_device *pdev = (pdf14_device *)dev; pdf14_ctx *ctx = pdev->ctx; pdf14_mask_t *new_mask; if_debug0('v', "pdf14_push_transparency_state\n"); /* We need to push the current mask buffer */ /* Allocate a new element for the stack. Don't do anything if there is no mask present.*/ if ( ctx->maskbuf != NULL ) { new_mask = pdf14_mask_element_new(ctx->memory); /* Duplicate and make the link */ new_mask->rc_mask = ctx->maskbuf->rc_mask; rc_increment(new_mask->rc_mask); ctx->maskbuf->previous = new_mask; } return(0); } static int pdf14_pop_transparency_state(gx_device *dev, gs_imager_state *pis) { /* Pop the soft mask. It is no longer needed. Likely due to a Q that has occurred. */ pdf14_device *pdev = (pdf14_device *)dev; pdf14_ctx *ctx = pdev->ctx; pdf14_mask_t *old_mask; if_debug0('v', "pdf14_pop_transparency_state\n"); /* rc decrement the current link after we break it from the list, then free the stack element. Don't do anything if there is no mask present. */ if ( ctx->maskbuf != NULL ) { old_mask = ctx->maskbuf; ctx->maskbuf = ctx->maskbuf->previous; if (old_mask->rc_mask) { rc_decrement(old_mask->rc_mask, "pdf14_pop_transparency_state"); } gs_free_object(old_mask->memory, old_mask, "pdf14_pop_transparency_state"); } return(0); } static int pdf14_open(gx_device *dev) { pdf14_device *pdev = (pdf14_device *)dev; gs_int_rect rect; if_debug2('v', "[v]pdf14_open: width = %d, height = %d\n", dev->width, dev->height); rect.p.x = 0; rect.p.y = 0; rect.q.x = dev->width; rect.q.y = dev->height; pdev->ctx = pdf14_ctx_new(&rect, dev->color_info.num_components, pdev->color_info.polarity != GX_CINFO_POLARITY_SUBTRACTIVE, dev->memory); if (pdev->ctx == NULL) return_error(gs_error_VMerror); return 0; } static const gx_cm_color_map_procs pdf14_DeviceCMYKspot_procs = { pdf14_gray_cs_to_cmyk_cm, pdf14_rgb_cs_to_cmyk_cm, pdf14_cmyk_cs_to_cmyk_cm }; static const gx_cm_color_map_procs * pdf14_cmykspot_get_color_mapping_procs(const gx_device * dev) { return &pdf14_DeviceCMYKspot_procs; } /* Used to passed along information about the buffer created by the pdf14 device. This is used by the pattern accumulator when the pattern contains transparency */ int pdf14_get_buffer_information(const gx_device * dev, gx_pattern_trans_t *transbuff){ const pdf14_device * pdev = (pdf14_device *)dev; pdf14_buf *buf; gs_int_rect rect; int x1,y1,width,height; if ( pdev->ctx == NULL){ return 0; /* this can occur if the pattern is a clist */ } buf = pdev->ctx->stack; rect = buf->rect; rect_intersect(rect, buf->bbox); x1 = min(pdev->width, rect.q.x); y1 = min(pdev->height, rect.q.y); width = x1 - rect.p.x; height = y1 - rect.p.y; if (width <= 0 || height <= 0 || buf->data == NULL) return 0; transbuff->pdev14 = dev; transbuff->n_chan = buf->n_chan; transbuff->planestride = buf->planestride; transbuff->rowstride = buf->rowstride; transbuff->transbytes = buf->data; transbuff->has_shape = buf->has_shape; transbuff->width = width; transbuff->height = height; transbuff->rect = rect; return(0); } /** * pdf14_put_image: Put rendered image to target device. * @pdev: The PDF 1.4 rendering device. * @pgs: State for image draw operation. * @target: The target device. * * Puts the rendered image in @pdev's buffer to @target. This is called * as part of the sequence of popping the PDF 1.4 device filter. * * Return code: negative on error. **/ static int pdf14_put_image(gx_device * dev, gs_imager_state * pis, gx_device * target) { const pdf14_device * pdev = (pdf14_device *)dev; int code; gs_image1_t image; gs_matrix pmat; gx_image_enum_common_t *info; pdf14_buf *buf = pdev->ctx->stack; gs_int_rect rect = buf->rect; int y; int num_comp = buf->n_chan - 1; byte *linebuf; gs_color_space *pcs; const byte bg = pdev->ctx->additive ? 255 : 0; int x1, y1, width, height; byte *buf_ptr; if_debug0('v', "[v]pdf14_put_image\n"); rect_intersect(rect, buf->bbox); x1 = min(pdev->width, rect.q.x); y1 = min(pdev->height, rect.q.y); width = x1 - rect.p.x; height = y1 - rect.p.y; #ifdef DUMP_TO_PNG dump_planar_rgba(pdev->memory, buf); #endif if (width <= 0 || height <= 0 || buf->data == NULL) return 0; buf_ptr = buf->data + rect.p.y * buf->rowstride + rect.p.x; #if 0 /* Set graphics state device to target, so that image can set up the color mapping properly. */ rc_increment(pdev); gs_setdevice_no_init(pgs, target); #endif /* * Set color space to either Gray, RGB, or CMYK in preparation for sending * an image. */ switch (num_comp) { case 1: /* DeviceGray */ pcs = gs_cspace_new_DeviceGray(pis->memory); break; case 3: /* DeviceRGB */ pcs = gs_cspace_new_DeviceRGB(pis->memory); break; case 4: /* DeviceCMYK */ pcs = gs_cspace_new_DeviceCMYK(pis->memory); break; default: /* Should never occur */ return_error(gs_error_rangecheck); break; } if (pcs == NULL) return_error(gs_error_VMerror); gs_image_t_init_adjust(&image, pcs, false); image.ImageMatrix.xx = (float)width; image.ImageMatrix.yy = (float)height; image.Width = width; image.Height = height; image.BitsPerComponent = 8; pmat.xx = (float)width; pmat.xy = 0; pmat.yx = 0; pmat.yy = (float)height; pmat.tx = (float)rect.p.x; pmat.ty = (float)rect.p.y; code = dev_proc(target, begin_typed_image) (target, pis, &pmat, (gs_image_common_t *)&image, NULL, NULL, NULL, pis->memory, &info); if (code < 0) { rc_decrement_only(pcs, "pdf14_put_image"); return code; } #if RAW_DUMP /* Dump the current buffer to see what we have. */ dump_raw_buffer(pdev->ctx->stack->rect.q.y-pdev->ctx->stack->rect.p.y, pdev->ctx->stack->rect.q.x-pdev->ctx->stack->rect.p.x, pdev->ctx->stack->n_planes, pdev->ctx->stack->planestride, pdev->ctx->stack->rowstride, "pdF14_putimage",pdev->ctx->stack->data); global_index++; clist_band_count++; #endif linebuf = gs_alloc_bytes(pdev->memory, width * num_comp, "pdf14_put_image"); for (y = 0; y < height; y++) { gx_image_plane_t planes; int rows_used; gx_build_blended_image_row(buf_ptr, y, buf->planestride, width, num_comp, bg, linebuf); planes.data = linebuf; planes.data_x = 0; planes.raster = width * num_comp; info->procs->plane_data(info, &planes, 1, &rows_used); /* todo: check return value */ buf_ptr += buf->rowstride; } gs_free_object(pdev->memory, linebuf, "pdf14_put_image"); info->procs->end_image(info, true); #if 0 /* Restore device in graphics state.*/ gs_setdevice_no_init(pgs, (gx_device*) pdev); rc_decrement_only(pdev, "pdf_14_put_image"); #endif rc_decrement_only(pcs, "pdf14_put_image"); return code; } /** * pdf14_cmykspot_put_image: Put rendered image to target device. * @pdev: The PDF 1.4 rendering device. * @pis: State for image draw operation. * @target: The target device. * * Puts the rendered image in @pdev's buffer to @target. This is called * as part of the sequence of popping the PDF 1.4 device filter. * * Return code: negative on error. **/ static int pdf14_cmykspot_put_image(gx_device * dev, gs_imager_state * pis, gx_device * target) { pdf14_device * pdev = (pdf14_device *)dev; pdf14_buf *buf = pdev->ctx->stack; gs_int_rect rect = buf->rect; int x1, y1, width, height; gs_devn_params * pdevn_params = &pdev->devn_params; gs_separations * pseparations = &pdevn_params->separations; int planestride = buf->planestride; int rowstride = buf->rowstride; const byte bg = pdev->ctx->additive ? gx_max_color_value : 0; int num_comp = buf->n_chan - 1; byte *buf_ptr; if_debug0('v', "[v]pdf14_cmykspot_put_image\n"); rect_intersect(rect, buf->bbox); x1 = min(pdev->width, rect.q.x); y1 = min(pdev->height, rect.q.y); width = x1 - rect.p.x; height = y1 - rect.p.y; if (width <= 0 || height <= 0 || buf->data == NULL) return 0; buf_ptr = buf->data + rect.p.y * buf->rowstride + rect.p.x; #if RAW_DUMP /* Dump the current buffer to see what we have. */ dump_raw_buffer(pdev->ctx->stack->rect.q.y-pdev->ctx->stack->rect.p.y, pdev->ctx->stack->rect.q.x-pdev->ctx->stack->rect.p.x, pdev->ctx->stack->n_planes, pdev->ctx->stack->planestride, pdev->ctx->stack->rowstride, "CMYK_SPOT_PUTIMAGE",pdev->ctx->stack->data); global_index++; clist_band_count++; #endif return gx_put_blended_image_cmykspot(target, buf_ptr, planestride, rowstride, rect.p.x, rect.p.y, width, height, num_comp, bg, pseparations); } /** * pdf14_custom_put_image: Put rendered image to target device. * @pdev: The PDF 1.4 rendering device. * @pis: State for image draw operation. * @target: The target device. * * Puts the rendered image in @pdev's buffer to @target. This is called * as part of the sequence of popping the PDF 1.4 device filter. * * Return code: negative on error. **/ static int pdf14_custom_put_image(gx_device * dev, gs_imager_state * pis, gx_device * target) { pdf14_device * pdev = (pdf14_device *)dev; pdf14_buf *buf = pdev->ctx->stack; gs_int_rect rect = buf->rect; int x0 = rect.p.x, y0 = rect.p.y; int planestride = buf->planestride; int rowstride = buf->rowstride; int num_comp = buf->n_chan - 1; const byte bg = pdev->ctx->additive ? gx_max_color_value : 0; int x1, y1, width, height; byte *buf_ptr; if_debug0('v', "[v]pdf14_custom_put_image\n"); rect_intersect(rect, buf->bbox); x1 = min(pdev->width, rect.q.x); y1 = min(pdev->height, rect.q.y); width = x1 - rect.p.x; height = y1 - rect.p.y; if (width <= 0 || height <= 0 || buf->data == NULL) return 0; buf_ptr = buf->data + rect.p.y * buf->rowstride + rect.p.x; return gx_put_blended_image_custom(target, buf_ptr, planestride, rowstride, x0, y0, width, height, num_comp, bg); } static int pdf14_close(gx_device *dev) { pdf14_device *pdev = (pdf14_device *)dev; if (pdev->ctx) { pdf14_ctx_free(pdev->ctx); pdev->ctx = NULL; } return 0; } static int pdf14_output_page(gx_device * dev, int num_copies, int flush) { pdf14_device * pdev = (pdf14_device *)dev; if (pdev->target != NULL) return (*dev_proc(pdev->target, output_page)) (pdev->target, num_copies, flush); return 0; } #define COPY_PARAM(p) dev->p = target->p #define COPY_ARRAY_PARAM(p) memcpy(dev->p, target->p, sizeof(dev->p)) /* * Copy device parameters back from a target. This copies all standard * parameters related to page size and resolution, but not any of the * color-related parameters, as the pdf14 device retains its own color * handling. This routine is parallel to gx_device_copy_params(). */ static void gs_pdf14_device_copy_params(gx_device *dev, const gx_device *target) { COPY_PARAM(width); COPY_PARAM(height); COPY_ARRAY_PARAM(MediaSize); COPY_ARRAY_PARAM(ImagingBBox); COPY_PARAM(ImagingBBox_set); COPY_ARRAY_PARAM(HWResolution); COPY_ARRAY_PARAM(MarginsHWResolution); COPY_ARRAY_PARAM(Margins); COPY_ARRAY_PARAM(HWMargins); COPY_PARAM(PageCount); #undef COPY_ARRAY_PARAM #undef COPY_PARAM } /* * This is a forwarding version of the put_params device proc. It is only * used when the PDF 1.4 compositor devices are closed. The routine will * check if the target device has closed and, if so, close itself. The routine * also sync the device parameters. */ static int pdf14_forward_put_params(gx_device * dev, gs_param_list * plist) { pdf14_device * pdev = (pdf14_device *)dev; gx_device * tdev = pdev->target; bool was_open = tdev->is_open; int code = 0; if (tdev != 0 && (code = dev_proc(tdev, put_params)(tdev, plist)) >= 0) { gx_device_decache_colors(dev); if (!tdev->is_open) { code = gs_closedevice(dev); if (code == 0) code = was_open ? 1 : 0; /* target device closed */ } gx_device_copy_params(dev, tdev); } return code; } /* Function prototypes */ int put_param_compressed_color_list_elem(gx_device * pdev, gs_param_list * plist, compressed_color_list_t ** pret_comp_list, char * keyname, int num_comps); int put_param_pdf14_spot_names(gx_device * pdev, gs_separations * pseparations, gs_param_list * plist); #define PDF14CompressedColorListParamName "PDF14CompressedColorList" #define PDF14NumSpotColorsParamName "PDF14NumSpotColors" /* * The put_params method for the PDF 1.4 device will check if the * target device has closed and, if so, close itself. Note: This routine is * currently being used by both the pdf14_clist_device and the pdf_device. * Please make sure that any changes are either applicable to both devices * or clone the routine for each device. */ static int pdf14_put_params(gx_device * dev, gs_param_list * plist) { pdf14_device * pdev = (pdf14_device *)dev; gx_device * tdev = pdev->target; bool was_open = tdev->is_open; int code = 0; if (tdev != 0 && (code = dev_proc(tdev, put_params)(tdev, plist)) >= 0) { gx_device_decache_colors(dev); if (!tdev->is_open) { code = gs_closedevice(dev); if (code == 0) code = was_open ? 1 : 0; /* target device closed */ } gs_pdf14_device_copy_params(dev, tdev); } #if 0 put_param_compressed_color_list_elem(pdev, plist, &pret_comp_list, PDF14CompressedColorListParamName, TOP_ENCODED_LEVEL); put_param_pdf14_spot_names(dev, &pdev->devn_params, plist); #endif return code; } /* * Copy marking related parameters into the PDF 1.4 device structure for use * by pdf14_fill_rrectangle. */ static void pdf14_set_marking_params(gx_device *dev, const gs_imager_state *pis) { pdf14_device * pdev = (pdf14_device *)dev; pdev->opacity = pis->opacity.alpha; pdev->shape = pis->shape.alpha; pdev->alpha = pis->opacity.alpha * pis->shape.alpha; pdev->blend_mode = pis->blend_mode; pdev->overprint = pis->overprint; pdev->overprint_mode = pis->overprint_mode; if_debug3('v', "[v]set_marking_params, opacity = %g, shape = %g, bm = %d\n", pdev->opacity, pdev->shape, pis->blend_mode); } static int pdf14_fill_path(gx_device *dev, const gs_imager_state *pis, gx_path *ppath, const gx_fill_params *params, const gx_drawing_color *pdcolor, const gx_clip_path *pcpath) { gs_imager_state new_is = *pis; int code; gs_pattern2_instance_t *pinst = NULL; if (pdcolor != NULL && gx_dc_is_pattern1_color(pdcolor)){ if( gx_pattern1_get_transptr(pdcolor) != NULL){ /* In this case, we need to push a transparency group and tile the pattern color, which is stored in a pdf14 device buffer in the ctile object memember variable ttrans */ #if RAW_DUMP /* Since we do not get a put_image to view what we have do it now */ pdf14_device * ppatdev14 = pdcolor->colors.pattern.p_tile->ttrans->pdev14; if (ppatdev14 != NULL) { /* can occur during clist reading */ dump_raw_buffer(ppatdev14->ctx->stack->rect.q.y-ppatdev14->ctx->stack->rect.p.y, ppatdev14->ctx->stack->rect.q.x-ppatdev14->ctx->stack->rect.p.x, ppatdev14->ctx->stack->n_planes, ppatdev14->ctx->stack->planestride, ppatdev14->ctx->stack->rowstride, "Pattern_Fill",ppatdev14->ctx->stack->data); global_index++; } else { gx_pattern_trans_t *patt_trans = pdcolor->colors.pattern.p_tile->ttrans; dump_raw_buffer(patt_trans->rect.q.y-patt_trans->rect.p.y, patt_trans->rect.q.x-patt_trans->rect.p.x, patt_trans->n_chan, patt_trans->planestride, patt_trans->rowstride, "Pattern_Fill_clist",patt_trans->transbytes); global_index++; } #endif code = pdf14_tile_pattern_fill(dev, &new_is, ppath, params, pdcolor, pcpath); new_is.trans_device = NULL; new_is.has_transparency = false; return code; } } if (pdcolor != NULL && gx_dc_is_pattern2_color(pdcolor)) { pinst = (gs_pattern2_instance_t *)pdcolor->ccolor.pattern; pinst->saved->has_transparency = true; /* The transparency color space operations are driven by the pdf14 clist writer device. */ pinst->saved->trans_device = dev; } /* * The blend operations are not idempotent. Force non-idempotent * filling and stroking operations. */ new_is.log_op |= lop_pdf14; pdf14_set_marking_params(dev, pis); new_is.trans_device = dev; new_is.has_transparency = true; code = gx_default_fill_path(dev, &new_is, ppath, params, pdcolor, pcpath); new_is.trans_device = NULL; new_is.has_transparency = false; if (pinst != NULL){ pinst->saved->trans_device = NULL; } return code; } static int pdf14_stroke_path(gx_device *dev, const gs_imager_state *pis, gx_path *ppath, const gx_stroke_params *params, const gx_drawing_color *pdcolor, const gx_clip_path *pcpath) { gs_imager_state new_is = *pis; /* * The blend operations are not idempotent. Force non-idempotent * filling and stroking operations. */ new_is.log_op |= lop_pdf14; pdf14_set_marking_params(dev, pis); return gx_default_stroke_path(dev, &new_is, ppath, params, pdcolor, pcpath); } /* Used for filling rects when we are doing a fill with a pattern that has transparency */ static int pdf14_tile_pattern_fill(gx_device * pdev, const gs_imager_state * pis, gx_path * ppath, const gx_fill_params * params, const gx_device_color * pdevc, const gx_clip_path * pcpath) { int code = 0; gs_imager_state *pis_noconst = (gs_imager_state *)pis; /* Break const. */ gs_fixed_rect clip_box; gs_fixed_rect outer_box; pdf14_device * p14dev = (pdf14_device *)pdev; gs_int_rect rect; gx_clip_rect *curr_clip_rect; gx_color_tile *ptile; int k; gx_pattern_trans_t *fill_trans_buffer; int ok; gs_int_point phase; /* Needed during clist rendering for band offset */ gx_clip_path cpath_intersection; if (pcpath != NULL) { code = gx_cpath_init_local_shared(&cpath_intersection, pcpath, pdev->memory); if (code < 0) return code; } else { (*dev_proc(pdev, get_clipping_box)) (pdev, &clip_box); gx_cpath_init_local(&cpath_intersection, ppath->memory); code = gx_cpath_from_rectangle(&cpath_intersection, &clip_box); } if (ppath != NULL) code = gx_cpath_intersect_with_params(&cpath_intersection, ppath, params->rule, pis_noconst, params); /* Now let us push a transparency group into which we are going to tile the pattern. */ if (ppath != NULL && code >= 0) { gx_cpath_outer_box(&cpath_intersection, &outer_box); rect.p.x = fixed2int(outer_box.p.x); rect.p.y = fixed2int(outer_box.p.y); rect.q.x = fixed2int_ceiling(outer_box.q.x); rect.q.y = fixed2int_ceiling(outer_box.q.y); /* The color space of this group must be the same as that of the tile. Then when we pop the group, if there is a mismatch between the tile color space and the current context we will do the proper conversion. In this way, we ensure that if the tile has any overlapping occuring it will be blended in the proper manner i.e in the tile underlying color space. */ ptile = pdevc->colors.pattern.p_tile; code = pdf14_push_transparency_group(p14dev->ctx, &rect, 1, 0, 255,255, pis->blend_mode, 0, 0, ptile->ttrans->n_chan-1); /* Set the blending procs and the is_additive setting based upon the number of channels */ if (ptile->ttrans->n_chan-1 < 4){ ptile->ttrans->blending_procs = &rgb_blending_procs; ptile->ttrans->is_additive = true; } else { ptile->ttrans->blending_procs = &cmyk_blending_procs; ptile->ttrans->is_additive = false; } /* Fix the reversed bbox. Not clear on why the push group does that */ p14dev->ctx->stack->bbox.p.x = p14dev->ctx->rect.p.x; p14dev->ctx->stack->bbox.p.y = p14dev->ctx->rect.p.y; p14dev->ctx->stack->bbox.q.x = p14dev->ctx->rect.q.x; p14dev->ctx->stack->bbox.q.y = p14dev->ctx->rect.q.y; /* Now lets go through the rect list and fill with the pattern */ /* First get the buffer that we will be filling */ fill_trans_buffer = new_pattern_trans_buff(pis->memory); pdf14_get_buffer_information(pdev, fill_trans_buffer); /* Set the blending mode in the ptile based upon the current setting in the imager state */ ptile->ttrans->blending_mode = pis->blend_mode; /* fill the rectangles */ phase.x = pdevc->phase.x; phase.y = pdevc->phase.y; /* Based upon if the tiles overlap pick the type of rect fill that we will want to use */ if (ptile->has_overlap) { /* This one does blending since there is tile overlap */ ptile->ttrans->pat_trans_fill = &tile_rect_trans_blend; } else { /* This one does no blending since there is no tile overlap */ ptile->ttrans->pat_trans_fill = &tile_rect_trans_simple; } if (cpath_intersection.rect_list->list.head != NULL){ curr_clip_rect = cpath_intersection.rect_list->list.head->next; for( k = 0; k< cpath_intersection.rect_list->list.count; k++){ if_debug5('v', "[v]pdf14_tile_pattern_fill, (%d, %d), %d x %d pat_id %d \n", curr_clip_rect->xmin, curr_clip_rect->ymin, curr_clip_rect->xmax-curr_clip_rect->xmin, curr_clip_rect->ymax-curr_clip_rect->ymin, ptile->id); ok = gx_trans_pattern_fill_rect(curr_clip_rect->xmin, curr_clip_rect->ymin, curr_clip_rect->xmax, curr_clip_rect->ymax, ptile, fill_trans_buffer, phase); curr_clip_rect = curr_clip_rect->next; } } else if (cpath_intersection.rect_list->list.count == 1) { /* The case when there is just a single rect */ if_debug5('v', "[v]pdf14_tile_pattern_fill, (%d, %d), %d x %d pat_id %d \n", cpath_intersection.rect_list->list.single.xmin, cpath_intersection.rect_list->list.single.ymin, cpath_intersection.rect_list->list.single.xmax-cpath_intersection.rect_list->list.single.xmin, cpath_intersection.rect_list->list.single.ymax-cpath_intersection.rect_list->list.single.ymin, ptile->id); ok = gx_trans_pattern_fill_rect(cpath_intersection.rect_list->list.single.xmin, cpath_intersection.rect_list->list.single.ymin, cpath_intersection.rect_list->list.single.xmax, cpath_intersection.rect_list->list.single.ymax, ptile, fill_trans_buffer, phase); } /* free our buffer object */ gs_free_object(pis->memory, fill_trans_buffer, "pdf14_tile_pattern_fill"); /* pop our transparency group which will force the blending */ code = pdf14_pop_transparency_group(p14dev->ctx, p14dev->blend_procs, p14dev->color_info.num_components); } return(code); } static int pdf14_begin_typed_image(gx_device * dev, const gs_imager_state * pis, const gs_matrix *pmat, const gs_image_common_t *pic, const gs_int_rect * prect, const gx_drawing_color * pdcolor, const gx_clip_path * pcpath, gs_memory_t * mem, gx_image_enum_common_t ** pinfo) { pdf14_set_marking_params(dev, pis); return gx_default_begin_typed_image(dev, pis, pmat, pic, prect, pdcolor, pcpath, mem, pinfo); } static void pdf14_set_params(gs_imager_state * pis, gx_device * dev, const gs_pdf14trans_params_t * pparams) { if_debug0('v', "[v]pdf14_set_params\n"); if (pparams->changed & PDF14_SET_BLEND_MODE) pis->blend_mode = pparams->blend_mode; if (pparams->changed & PDF14_SET_TEXT_KNOCKOUT) pis->text_knockout = pparams->text_knockout; if (pparams->changed & PDF14_SET_SHAPE_ALPHA) pis->shape.alpha = pparams->shape.alpha; if (pparams->changed & PDF14_SET_OPACITY_ALPHA) pis->opacity.alpha = pparams->opacity.alpha; if (pparams->changed & PDF14_SET_OVERPRINT) pis->overprint = pparams->overprint; if (pparams->changed & PDF14_SET_OVERPRINT_MODE) pis->overprint_mode = pparams->overprint_mode; pdf14_set_marking_params(dev, pis); } /* * This open_device method for the PDF 1.4 compositor devices is only used * when these devices are disabled. This routine is about as close to * a pure "forwarding" open_device operation as is possible. Its only * significant function is to ensure that the is_open field of the * PDF 1.4 compositor devices matches that of the target device. * * We assume this procedure is called only if the device is not already * open, and that gs_opendevice will take care of the is_open flag. */ static int pdf14_forward_open_device(gx_device * dev) { gx_device_forward * pdev = (gx_device_forward *)dev; gx_device * tdev = pdev->target; int code = 0; /* The PDF 1.4 compositing devices must have a target */ if (tdev == 0) return_error(gs_error_unknownerror); if ((code = gs_opendevice(tdev)) >= 0) gx_device_copy_params(dev, tdev); return code; } /* * Convert all device procs to be 'forwarding'. The caller is responsible * for setting any device procs that should not be forwarded. */ static void pdf14_forward_device_procs(gx_device * dev) { gx_device_forward * pdev = (gx_device_forward *)dev; /* * We are using gx_device_forward_fill_in_procs to set the various procs. * This will ensure that any new device procs are also set. However that * routine only changes procs which are NULL. Thus we start by setting all * procs to NULL. */ memset(&(pdev->procs), 0, size_of(pdev->procs)); gx_device_forward_fill_in_procs(pdev); /* * gx_device_forward_fill_in_procs does not forward all procs. * Set the remainding procs to also forward. */ set_dev_proc(dev, close_device, gx_forward_close_device); set_dev_proc(dev, fill_rectangle, gx_forward_fill_rectangle); set_dev_proc(dev, tile_rectangle, gx_forward_tile_rectangle); set_dev_proc(dev, copy_mono, gx_forward_copy_mono); set_dev_proc(dev, copy_color, gx_forward_copy_color); set_dev_proc(dev, get_page_device, gx_forward_get_page_device); set_dev_proc(dev, strip_tile_rectangle, gx_forward_strip_tile_rectangle); set_dev_proc(dev, copy_alpha, gx_forward_copy_alpha); /* These are forwarding devices with minor tweaks. */ set_dev_proc(dev, open_device, pdf14_forward_open_device); set_dev_proc(dev, put_params, pdf14_forward_put_params); } /* * Disable the PDF 1.4 compositor device. Once created, the PDF 1.4 * compositor device is never removed. (We do not have a remove compositor * method.) However it is no-op'ed when the PDF 1.4 device is popped. This * routine implements that action. */ int pdf14_disable_device(gx_device * dev) { gx_device_forward * pdev = (gx_device_forward *)dev; if_debug0('v', "[v]pdf14_disable_device\n"); dev->color_info = pdev->target->color_info; pdf14_forward_device_procs(dev); set_dev_proc(dev, create_compositor, pdf14_forward_create_compositor); return 0; } /* * The default color space for PDF 1.4 blend modes is based upon the process * color model of the output device. */ static pdf14_default_colorspace_t pdf14_determine_default_blend_cs(gx_device * pdev) { if (pdev->color_info.polarity == GX_CINFO_POLARITY_ADDITIVE) /* * Note: We do not allow the SeparationOrder device parameter for * additive devices. Thus we always have 1 colorant for DeviceGray * and 3 colorants for DeviceRGB. */ if (pdev->color_info.num_components == 1) return PDF14_DeviceGray; else return PDF14_DeviceRGB; else { /* * Check if the device is CMYK only or CMYK plus spot colors. */ int i, output_comp_num, num_cmyk_used = 0, num_cmyk = 0; #if CUSTOM_BLENDING_MODE == ALWAYS_USE_CUSTOM_BLENDING return PDF14_DeviceCustom; #endif /* * Count the number of CMYK process components supported by the output * device. */ for (i = 0; i < 4; i++) { const char * pcomp_name = (const char *)DeviceCMYKComponents[i]; output_comp_num = dev_proc(pdev, get_color_comp_index) (pdev, pcomp_name, strlen(pcomp_name), NO_COMP_NAME_TYPE); if (output_comp_num >= 0) { num_cmyk++; if (output_comp_num != GX_DEVICE_COLOR_MAX_COMPONENTS) num_cmyk_used++; } } /* * Check if the device supports only CMYK. Otherewise we assume that * the output device supports spot colors. Note: This algorithm can * be fooled if the SeparationOrder device parameter is being used by * the output device device to only select CMYK. */ if (num_cmyk_used == 4 && pdev->color_info.num_components == 4 && pdev->color_info.max_components == 4) return PDF14_DeviceCMYK; /* * Check if we should use the 'custom' PDF 1.4 compositor device. * This device is only needed for those devices which do not support * a basic CMYK process color model. */ #if CUSTOM_BLENDING_MODE == AUTO_USE_CUSTOM_BLENDING if (num_cmyk != 4) return PDF14_DeviceCustom; #endif /* * Otherewise we use a CMYK plus spot colors for blending. */ return PDF14_DeviceCMYKspot; } } /* * the PDF 1.4 transparency spec says that color space for blending * operations can be based upon either a color space specified in the * group or a default value based upon the output device. We are * currently only using a color space based upon the device. */ static int get_pdf14_device_proto(gx_device * dev, pdf14_device ** pdevproto, pdf14_device * ptempdevproto, gs_imager_state * pis, const gs_pdf14trans_t * pdf14pct) { pdf14_default_colorspace_t dev_cs = pdf14_determine_default_blend_cs(dev); switch (dev_cs) { case PDF14_DeviceGray: *pdevproto = (pdf14_device *)&gs_pdf14_Gray_device; /* We want gray to be single channel. Low level initialization of gray device prototype is peculiar in that in dci_std_color_num_components the comment is "A device is monochrome only if it is bi-level" Here we want monochrome anytime we have a gray device. To avoid breaking things elsewhere, we will overide the prototype intialization here */ *ptempdevproto = **pdevproto; ptempdevproto->color_info.max_components = 1; ptempdevproto->color_info.num_components = ptempdevproto->color_info.max_components; *pdevproto = ptempdevproto; break; case PDF14_DeviceRGB: *pdevproto = (pdf14_device *)&gs_pdf14_RGB_device; break; case PDF14_DeviceCMYK: *pdevproto = (pdf14_device *)&gs_pdf14_CMYK_device; break; case PDF14_DeviceCMYKspot: *pdevproto = (pdf14_device *)&gs_pdf14_CMYKspot_device; /* * The number of components for the PDF14 device is the sum * of the process components and the number of spot colors * for the page. */ if (pdf14pct->params.num_spot_colors >= 0) { *ptempdevproto = **pdevproto; ptempdevproto->devn_params.page_spot_colors = pdf14pct->params.num_spot_colors; ptempdevproto->color_info.num_components = ptempdevproto->devn_params.num_std_colorant_names + pdf14pct->params.num_spot_colors; if (ptempdevproto->color_info.num_components > ptempdevproto->color_info.max_components) ptempdevproto->color_info.num_components = ptempdevproto->color_info.max_components; *pdevproto = ptempdevproto; } break; case PDF14_DeviceCustom: /* * We are using the output device's process color model. The * color_info for the PDF 1.4 compositing device needs to match * the output device. */ *ptempdevproto = gs_pdf14_custom_device; ptempdevproto->color_info = dev->color_info; *pdevproto = ptempdevproto; break; default: /* Should not occur */ return_error(gs_error_rangecheck); } return 0; } /* * Recreate the PDF 1.4 compositor device. Once created, the PDF 1.4 * compositor device is never removed. (We do not have a remove compositor * method.) However it is no-op'ed when the PDF 1.4 device is popped. This * routine will re-enable the compositor if the PDF 1.4 device is pushed * again. */ static int pdf14_recreate_device(gs_memory_t *mem, gs_imager_state * pis, gx_device * dev, const gs_pdf14trans_t * pdf14pct) { pdf14_device * pdev = (pdf14_device *)dev; gx_device * target = pdev->target; pdf14_device * dev_proto; pdf14_device temp_dev_proto; int code; if_debug0('v', "[v]pdf14_recreate_device\n"); /* * We will not use the entire prototype device but we will set the * color related info and the device procs to match the prototype. */ code = get_pdf14_device_proto(target, &dev_proto, &temp_dev_proto, pis, pdf14pct); if (code < 0) return code; pdev->color_info = dev_proto->color_info; pdev->procs = dev_proto->procs; dev->static_procs = dev_proto->static_procs; gx_device_set_procs(dev); gx_device_fill_in_procs(dev); check_device_separable(dev); return dev_proc(pdev, open_device)(dev); } /* * Implement the various operations that can be specified via the PDF 1.4 * create compositor request. */ static int gx_update_pdf14_compositor(gx_device * pdev, gs_imager_state * pis, const gs_pdf14trans_t * pdf14pct, gs_memory_t * mem ) { pdf14_device *p14dev = (pdf14_device *)pdev; gs_pdf14trans_params_t params = pdf14pct->params; int code = 0; params.idle = pdf14pct->idle; switch (params.pdf14_op) { default: /* Should not occur. */ break; case PDF14_PUSH_DEVICE: p14dev->blend_mode = 0; p14dev->opacity = p14dev->shape = 0.0; pdf14_recreate_device(mem, pis, pdev, pdf14pct); break; case PDF14_POP_DEVICE: if_debug0('v', "[v]gx_update_pdf14_compositor(PDF14_POP_DEVICE)\n"); pis->get_cmap_procs = p14dev->save_get_cmap_procs; gx_set_cmap_procs(pis, p14dev->target); /* Send image out raster data to output device */ { /* Make a copy so we can change the ROP */ gs_imager_state new_is = *pis; /* We don't use the imager state log_op since this is for the */ /* clist playback. Putting the image (band in the case of the */ /* clist) only needs to use the default ROP to copy the data */ new_is.log_op = rop3_default; p14dev->pdf14_procs->put_image(pdev, &new_is, p14dev->target); } pdf14_disable_device(pdev); pdf14_close(pdev); break; case PDF14_BEGIN_TRANS_GROUP: code = gx_begin_transparency_group(pis, pdev, ¶ms); break; case PDF14_END_TRANS_GROUP: code = gx_end_transparency_group(pis, pdev); break; case PDF14_BEGIN_TRANS_MASK: code = gx_begin_transparency_mask(pis, pdev, ¶ms); break; case PDF14_END_TRANS_MASK: code = gx_end_transparency_mask(pis, pdev, ¶ms); break; case PDF14_SET_BLEND_PARAMS: pdf14_set_params(pis, pdev, &pdf14pct->params); break; case PDF14_PUSH_TRANS_STATE: code = gx_push_transparency_state(pis, pdev); break; case PDF14_POP_TRANS_STATE: code = gx_pop_transparency_state(pis, pdev); break; } return code; } /* * The PDF 1.4 compositor is never removed. (We do not have a 'remove * compositor' method. However the compositor is disabled when we are not * doing a page which uses PDF 1.4 transparency. This routine is only active * when the PDF 1.4 compositor is 'disabled'. It checks for reenabling the * PDF 1.4 compositor. Otherwise it simply passes create compositor requests * to the targer. */ static int pdf14_forward_create_compositor(gx_device * dev, gx_device * * pcdev, const gs_composite_t * pct, gs_imager_state * pis, gs_memory_t * mem) { pdf14_device *pdev = (pdf14_device *)dev; gx_device * tdev = pdev->target; gx_device * ndev; int code = 0; *pcdev = dev; if (gs_is_pdf14trans_compositor(pct)) { const gs_pdf14trans_t * pdf14pct = (const gs_pdf14trans_t *) pct; if (pdf14pct->params.pdf14_op == PDF14_PUSH_DEVICE) return gx_update_pdf14_compositor(dev, pis, pdf14pct, mem); return 0; } code = dev_proc(tdev, create_compositor)(tdev, &ndev, pct, pis, mem); if (code < 0) return code; pdev->target = ndev; return 0; } /* * The PDF 1.4 compositor can be handled directly, so just set *pcdev = dev * and return. Since the gs_pdf14_device only supports the high-level routines * of the interface, don't bother trying to handle any other compositor. */ static int pdf14_create_compositor(gx_device * dev, gx_device * * pcdev, const gs_composite_t * pct, gs_imager_state * pis, gs_memory_t * mem) { pdf14_device *p14dev = (pdf14_device *)dev; if (gs_is_pdf14trans_compositor(pct)) { const gs_pdf14trans_t * pdf14pct = (const gs_pdf14trans_t *) pct; *pcdev = dev; return gx_update_pdf14_compositor(dev, pis, pdf14pct, mem); } else if (gs_is_overprint_compositor(pct)) { /* If we had an overprint compositer action, then the color components that were drawn should be updated. The overprint compositor logic and its interactions with the clist is a little odd as it passes uninitialized values around a fair amount. Hence the forced assignement here. See gx_spot_colors_set_overprint in gscspace for issues... */ const gs_overprint_t * op_pct = (const gs_overprint_t *) pct; if (op_pct->params.retain_any_comps && !op_pct->params.retain_spot_comps) { p14dev->drawn_comps = op_pct->params.drawn_comps; } else { /* Draw everything. If this parameter was not set, clist does not fill it in. */ p14dev->drawn_comps = ( (gx_color_index) 1 << (p14dev->color_info.num_components)) - (gx_color_index) 1; } *pcdev = dev; return 0; } else return gx_no_create_compositor(dev, pcdev, pct, pis, mem); } static int pdf14_text_begin(gx_device * dev, gs_imager_state * pis, const gs_text_params_t * text, gs_font * font, gx_path * path, const gx_device_color * pdcolor, const gx_clip_path * pcpath, gs_memory_t * memory, gs_text_enum_t ** ppenum) { int code; gs_text_enum_t *penum; if_debug0('v', "[v]pdf14_text_begin\n"); pdf14_set_marking_params(dev, pis); code = gx_default_text_begin(dev, pis, text, font, path, pdcolor, pcpath, memory, &penum); if (code < 0) return code; *ppenum = (gs_text_enum_t *)penum; return code; } /* * Implement copy_mono by filling lots of small rectangles. */ static int pdf14_copy_mono(gx_device * dev, const byte * base, int sourcex, int sraster, gx_bitmap_id id, int x, int y, int w, int h, gx_color_index zero, gx_color_index one) { const byte *sptr; const byte *line; int sbit, first_bit; int code, sbyte, bit, count; int run_length, startx, current_bit, bit_value; gx_color_index current_color; fit_copy(dev, base, sourcex, sraster, id, x, y, w, h); line = base + (sourcex >> 3); sbit = sourcex & 7; first_bit = 7 - sbit; /* Loop through the height of the specfied area. */ while (h-- > 0) { /* Set up for the start of each line of the area. */ sptr = line; sbyte = *sptr++; bit = first_bit; count = w; run_length = 0; startx = x; current_bit = 0; current_color = zero; /* Loop across each pixel of a line. */ do { bit_value = (sbyte >> bit) & 1; if (bit_value == current_bit) { /* The value did not change, simply increment our run length */ run_length++; } else { /* The value changed, fill the current rectangle. */ if (run_length != 0) { if (current_color != gx_no_color_index) { code = (*dev_proc(dev, fill_rectangle)) (dev, startx, y, run_length, 1, current_color); if (code < 0) return code; } startx += run_length; } run_length = 1; current_color = bit_value ? one : zero; current_bit = bit_value; } /* Move to the next input bit. */ if (bit == 0) { bit = 7; sbyte = *sptr++; } else bit--; } while (--count > 0); /* Fill the last rectangle in the line. */ if (run_length != 0 && current_color != gx_no_color_index) { code = (*dev_proc(dev, fill_rectangle)) (dev, startx, y, run_length, 1, current_color); if (code < 0) return code; } /* Move to the next line */ line += sraster; y++; } return 0; } static int pdf14_fill_rectangle(gx_device * dev, int x, int y, int w, int h, gx_color_index color) { pdf14_device *pdev = (pdf14_device *)dev; pdf14_buf *buf = pdev->ctx->stack; fit_fill_xywh(dev, x, y, w, h); if (w <= 0 || h <= 0) return 0; if (buf->knockout) return pdf14_mark_fill_rectangle_ko_simple(dev, x, y, w, h, color); else return pdf14_mark_fill_rectangle(dev, x, y, w, h, color); } static int pdf14_compute_group_device_int_rect(const gs_matrix *ctm, const gs_rect *pbbox, gs_int_rect *rect) { gs_rect dev_bbox; int code; code = gs_bbox_transform(pbbox, ctm, &dev_bbox); if (code < 0) return code; rect->p.x = (int)floor(dev_bbox.p.x); rect->p.y = (int)floor(dev_bbox.p.y); rect->q.x = (int)ceil(dev_bbox.q.x); rect->q.y = (int)ceil(dev_bbox.q.y); return 0; } static int compute_group_device_int_rect(pdf14_device *pdev, gs_int_rect *rect, const gs_rect *pbbox, gs_imager_state *pis) { int code = pdf14_compute_group_device_int_rect(&ctm_only(pis), pbbox, rect); if (code < 0) return code; rect_intersect(*rect, pdev->ctx->rect); /* Make sure the rectangle is not anomalous (q < p) -- see gsrect.h */ if (rect->q.x < rect->p.x) rect->q.x = rect->p.x; if (rect->q.y < rect->p.y) rect->q.y = rect->p.y; return 0; } static int pdf14_begin_transparency_group(gx_device *dev, const gs_transparency_group_params_t *ptgp, const gs_rect *pbbox, gs_imager_state *pis, gs_transparency_state_t **ppts, gs_memory_t *mem) { pdf14_device *pdev = (pdf14_device *)dev; double alpha = pis->opacity.alpha * pis->shape.alpha; gs_int_rect rect; int code; bool isolated; bool sep_target = (strcmp(pdev->dname, "pdf14cmykspot") == 0); int group_color_numcomps; gs_transparency_color_t group_color; /* If the target device supports separations, then we should should NOT create the group. The exception to this rule would be if we just popped a transparency mask */ code = compute_group_device_int_rect(pdev, &rect, pbbox, pis); if (code < 0) return code; if_debug4('v', "[v]pdf14_begin_transparency_group, I = %d, K = %d, alpha = %g, bm = %d\n", ptgp->Isolated, ptgp->Knockout, alpha, pis->blend_mode); /* If the group color is unknown, then we must use the previous group color space or the device process color space */ if (ptgp->group_color == UNKNOWN){ if (pdev->ctx->stack){ /* Use previous group color space */ group_color_numcomps = pdev->ctx->stack->n_chan-1; /* Remove alpha */ } else { /* Use process color space */ group_color_numcomps = pdev->color_info.num_components; } switch (group_color_numcomps) { case 1: group_color = GRAY_SCALE; break; case 3: group_color = DEVICE_RGB; break; case 4: group_color = DEVICE_CMYK; break; default: /* We can end up here if we are in a deviceN color space and we have a sep output device */ group_color = DEVICEN; break; } } else { group_color_numcomps = ptgp->group_color_numcomps; group_color = ptgp->group_color; } /* If needed, update the color mapping procs. But only if we dont have a sep device. The exception would be if we are in doing the group for a soft mask */ if (!sep_target) { code = pdf14_update_device_color_procs(dev,group_color,pis); } else { code = 0; group_color_numcomps = pdev->color_info.num_components; } /* Note that our initial device buffer may have had a different color space than the first transparency group. In such a case, we really should force this first group to be isolated, anytime that the parent color space is different than its child group, it should be isolated, per the PDF spec */ if (code == 1){ isolated = true; if_debug0('v', "[v]Transparency group color space change\n"); } else { isolated = ptgp->Isolated; } if (code < 0) return code; code = pdf14_push_transparency_group(pdev->ctx, &rect, isolated, ptgp->Knockout, (byte)floor (255 * alpha + 0.5), (byte)floor (255 * pis->shape.alpha + 0.5), pis->blend_mode, ptgp->idle, ptgp->mask_id,group_color_numcomps); return code; } static int pdf14_end_transparency_group(gx_device *dev, gs_imager_state *pis, gs_transparency_state_t **ppts) { pdf14_device *pdev = (pdf14_device *)dev; int code; pdf14_parent_color_t *parent_color; if_debug0('v', "[v]pdf14_end_transparency_group\n"); vd_get_dc('c'); vd_set_shift(0, 0); vd_set_scale(0.01); vd_set_origin(0, 0); vd_erase(RGB(192, 192, 192)); code = pdf14_pop_transparency_group(pdev->ctx, pdev->blend_procs,pdev->color_info.num_components); /* May need to reset some color stuff related * to a mismatch between the parents color space * and the group blending space */ parent_color = &(pdev->ctx->stack->parent_color_info_procs); if (!(parent_color->parent_color_mapping_procs == NULL && parent_color->parent_color_comp_index == NULL)) { pis->get_cmap_procs = parent_color->get_cmap_procs; gx_set_cmap_procs(pis, dev); pdev->procs.get_color_mapping_procs = parent_color->parent_color_mapping_procs; pdev->procs.get_color_comp_index = parent_color->parent_color_comp_index; pdev->color_info.polarity = parent_color->polarity; pdev->color_info.num_components = parent_color->num_components; pdev->blend_procs = parent_color->parent_blending_procs; pdev->ctx->additive = parent_color->isadditive; pdev->pdf14_procs = parent_color->unpack_procs; pdev->color_info.depth = parent_color->depth; memcpy(&(pdev->color_info.comp_bits),&(parent_color->comp_bits),GX_DEVICE_COLOR_MAX_COMPONENTS); memcpy(&(pdev->color_info.comp_shift),&(parent_color->comp_shift),GX_DEVICE_COLOR_MAX_COMPONENTS); parent_color->get_cmap_procs = NULL; parent_color->parent_color_comp_index = NULL; parent_color->parent_color_mapping_procs = NULL; } vd_release_dc; return code; } static int pdf14_update_device_color_procs(gx_device *dev, gs_transparency_color_t group_color, gs_imager_state *pis) { pdf14_device *pdevproto; pdf14_device *pdev = (pdf14_device *)dev; const pdf14_procs_t *new_14procs; pdf14_parent_color_t *parent_color_info; gx_color_polarity_t new_polarity; int new_num_comps; bool new_additive; byte new_depth; byte comp_bits[] = {0,0,0,0}; byte comp_shift[] = {0,0,0,0}; int k; if (pdev->ctx->stack != NULL){ parent_color_info = &(pdev->ctx->stack->parent_color_info_procs); } else { /* This should not occur */ return_error(gs_error_undefined); } if_debug0('v', "[v]pdf14_update_device_color_procs\n"); /* Update the device procs at this stage. Many of the procs are based upon the color space of the device. We want to remain in the color space defined by the color space of the soft mask or transparency group as opposed to the device color space. Later, when we pop the softmask we will collapse it to a single band and then compose with it to the device color space (or the parent layer space). In the case where we pop an isolated transparency group, we will do the blending in the proper color space and then transform the data when we pop the group. Remember that only isolated groups can have color spaces that are different than their parent. */ parent_color_info->get_cmap_procs = NULL; parent_color_info->parent_color_mapping_procs = NULL; parent_color_info->parent_color_comp_index = NULL; switch (group_color) { case GRAY_SCALE: new_polarity = GX_CINFO_POLARITY_ADDITIVE; new_num_comps = 1; pdevproto = (pdf14_device *)&gs_pdf14_Gray_device; new_additive = true; new_14procs = &gray_pdf14_procs; new_depth = 8; comp_bits[0] = 8; comp_shift[0] = 0; break; case DEVICE_RGB: case CIE_XYZ: new_polarity = GX_CINFO_POLARITY_ADDITIVE; new_num_comps = 3; pdevproto = (pdf14_device *)&gs_pdf14_RGB_device; new_additive = true; new_14procs = &rgb_pdf14_procs; new_depth = 24; for (k = 0; k < 3; k++) { comp_bits[k] = 8; comp_shift[k] = (2-k)*8; } break; case DEVICE_CMYK: new_polarity = GX_CINFO_POLARITY_SUBTRACTIVE; new_num_comps = 4; pdevproto = (pdf14_device *)&gs_pdf14_CMYK_device; new_additive = false; /* This is needed due to the mismatched compressed encode decode between the device procs and the pdf14 procs */ if (dev->color_info.num_components > 4){ new_14procs = &cmykspot_pdf14_procs; } else { new_14procs = &cmyk_pdf14_procs; } new_depth = 32; for (k = 0; k < 4; k++) { comp_bits[k] = 8; comp_shift[k] = (3-k)*8; } break; default: return_error(gs_error_rangecheck); break; } if_debug2('v', "[v]pdf14_update_device_color_procs,num_components_old = %d num_components_new = %d\n", pdev->color_info.num_components,new_num_comps); /* Save the old information */ parent_color_info->get_cmap_procs = pis->get_cmap_procs; parent_color_info->parent_color_mapping_procs = pdev->procs.get_color_mapping_procs; parent_color_info->parent_color_comp_index = pdev->procs.get_color_comp_index; parent_color_info->parent_blending_procs = pdev->blend_procs; parent_color_info->polarity = pdev->color_info.polarity; parent_color_info->num_components = pdev->color_info.num_components; parent_color_info->isadditive = pdev->ctx->additive; parent_color_info->unpack_procs = pdev->pdf14_procs; parent_color_info->depth = pdev->color_info.depth; memcpy(&(parent_color_info->comp_bits),&(pdev->color_info.comp_bits),GX_DEVICE_COLOR_MAX_COMPONENTS); memcpy(&(parent_color_info->comp_shift),&(pdev->color_info.comp_shift),GX_DEVICE_COLOR_MAX_COMPONENTS); /* Set new information */ pis->get_cmap_procs = pdf14_get_cmap_procs_group; gx_set_cmap_procs(pis, dev); pdev->procs.get_color_mapping_procs = pdevproto->static_procs->get_color_mapping_procs; pdev->procs.get_color_comp_index = pdevproto->static_procs->get_color_comp_index; pdev->blend_procs = pdevproto->blend_procs; pdev->color_info.polarity = new_polarity; pdev->color_info.num_components = new_num_comps; pdev->ctx->additive = new_additive; pdev->pdf14_procs = new_14procs; pdev->color_info.depth = new_depth; memset(&(pdev->color_info.comp_bits),0,GX_DEVICE_COLOR_MAX_COMPONENTS); memset(&(pdev->color_info.comp_shift),0,GX_DEVICE_COLOR_MAX_COMPONENTS); memcpy(&(pdev->color_info.comp_bits),comp_bits,4); memcpy(&(pdev->color_info.comp_shift),comp_shift,4); return(1); /* Lets us detect that we did do an update */ } /* A new version that works with the color_procs stack for transparency groups */ static int pdf14_update_device_color_procs_push_c(gx_device *dev, gs_transparency_color_t group_color, gs_imager_state *pis) { pdf14_device *pdevproto; pdf14_device *pdev = (pdf14_device *)dev; gx_device_clist_writer * cldev = (gx_device_clist_writer *)pdev->pclist_device; const pdf14_procs_t *new_14procs; bool update_color_info; gx_color_polarity_t new_polarity; int new_num_comps; bool new_additive; byte new_depth; byte comp_bits[] = {0,0,0,0}; byte comp_shift[] = {0,0,0,0}; int k; if_debug0('v', "[v]pdf14_update_device_color_procs_push_c\n"); /* Check if we need to alter the device procs at this stage. Many of the procs are based upon the color space of the device. We want to remain in the color space defined by the color space of the soft mask or transparency group as opposed to the device color space. Later, when we pop the softmask we will collapse it to a single band and then compose with it to the device color space (or the parent layer space). In the case where we pop an isolated transparency group, we will do the blending in the proper color space and then transform the data when we pop the group. Remember that only isolated groups can have color spaces that are different than their parent. */ update_color_info = false; switch (group_color) { case GRAY_SCALE: if (pdev->color_info.num_components != 1){ update_color_info = true; new_polarity = GX_CINFO_POLARITY_ADDITIVE; new_num_comps = 1; pdevproto = (pdf14_device *)&gs_pdf14_Gray_device; new_additive = true; new_14procs = &gray_pdf14_procs; new_depth = 8; comp_bits[0] = 8; comp_shift[0] = 0; } break; case DEVICE_RGB: case CIE_XYZ: if (pdev->color_info.num_components != 3){ update_color_info = true; new_polarity = GX_CINFO_POLARITY_ADDITIVE; new_num_comps = 3; pdevproto = (pdf14_device *)&gs_pdf14_RGB_device; new_additive = true; new_14procs = &rgb_pdf14_procs; new_depth = 24; for (k = 0; k < 3; k++) { comp_bits[k] = 8; comp_shift[k] = (2-k)*8; } } break; case DEVICE_CMYK: if (pdev->color_info.num_components != 4){ update_color_info = true; new_polarity = GX_CINFO_POLARITY_SUBTRACTIVE; new_num_comps = 4; pdevproto = (pdf14_device *)&gs_pdf14_CMYK_device; new_additive = false; /* This is needed due to the mismatched compressed encode decode between the device procs and the pdf14 procs */ if (dev->color_info.num_components > 4){ new_14procs = &cmykspot_pdf14_procs; } else { new_14procs = &cmyk_pdf14_procs; } new_depth = 32; for (k = 0; k < 4; k++) { comp_bits[k] = 8; comp_shift[k] = (3-k)*8; } } break; default: return_error(gs_error_rangecheck); break; } if (update_color_info){ if_debug2('v', "[v]pdf14_update_device_color_procs_push_c,num_components_old = %d num_components_new = %d\n", pdev->color_info.num_components,new_num_comps); /* Set new information in the device */ pis->get_cmap_procs = pdf14_get_cmap_procs_group; gx_set_cmap_procs(pis, dev); pdev->procs.get_color_mapping_procs = pdevproto->static_procs->get_color_mapping_procs; pdev->procs.get_color_comp_index = pdevproto->static_procs->get_color_comp_index; pdev->blend_procs = pdevproto->blend_procs; pdev->color_info.polarity = new_polarity; pdev->color_info.num_components = new_num_comps; pdev->pdf14_procs = new_14procs; pdev->color_info.depth = new_depth; memset(&(pdev->color_info.comp_bits),0,GX_DEVICE_COLOR_MAX_COMPONENTS); memset(&(pdev->color_info.comp_shift),0,GX_DEVICE_COLOR_MAX_COMPONENTS); memcpy(&(pdev->color_info.comp_bits),comp_bits,4); memcpy(&(pdev->color_info.comp_shift),comp_shift,4); cldev->clist_color_info.depth = pdev->color_info.depth; cldev->clist_color_info.polarity = pdev->color_info.polarity; cldev->clist_color_info.num_components = pdev->color_info.num_components; if (pdev->ctx) { pdev->ctx->additive = new_additive; } return(1); /* Lets us detect that we did do an update */ } if_debug0('v', "[v]procs not updated\n"); return 0; } static int pdf14_update_device_color_procs_pop_c(gx_device *dev,gs_imager_state *pis) { pdf14_device *pdev = (pdf14_device *)dev; pdf14_parent_color_t *parent_color = pdev->trans_group_parent_cmap_procs; gx_device_clist_writer * cldev = (gx_device_clist_writer *)pdev->pclist_device; if_debug0('v', "[v]pdf14_update_device_color_procs_pop_c\n"); /* The color procs are always pushed. Simply restore them. */ if (!(parent_color->parent_color_mapping_procs == NULL && parent_color->parent_color_comp_index == NULL)) { if_debug2('v', "[v]pdf14_update_device_color_procs_pop_c,num_components_old = %d num_components_new = %d\n", pdev->color_info.num_components,parent_color->num_components); pis->get_cmap_procs = parent_color->get_cmap_procs; gx_set_cmap_procs(pis, dev); pdev->procs.get_color_mapping_procs = parent_color->parent_color_mapping_procs; pdev->procs.get_color_comp_index = parent_color->parent_color_comp_index; pdev->color_info.polarity = parent_color->polarity; pdev->color_info.depth = parent_color->depth; pdev->color_info.num_components = parent_color->num_components; pdev->blend_procs = parent_color->parent_blending_procs; pdev->pdf14_procs = parent_color->unpack_procs; memcpy(&(pdev->color_info.comp_bits),&(parent_color->comp_bits),GX_DEVICE_COLOR_MAX_COMPONENTS); memcpy(&(pdev->color_info.comp_shift),&(parent_color->comp_shift),GX_DEVICE_COLOR_MAX_COMPONENTS); /* clist writer fill rect has no access to imager state */ /* and it forwards the target device. this information */ /* is passed along to use in this case */ cldev->clist_color_info.depth = pdev->color_info.depth; cldev->clist_color_info.polarity = pdev->color_info.polarity; cldev->clist_color_info.num_components = pdev->color_info.num_components; memcpy(&(cldev->clist_color_info.comp_bits),&(parent_color->comp_bits),GX_DEVICE_COLOR_MAX_COMPONENTS); memcpy(&(cldev->clist_color_info.comp_shift),&(parent_color->comp_shift),GX_DEVICE_COLOR_MAX_COMPONENTS); if (pdev->ctx){ pdev->ctx->additive = parent_color->isadditive; } if_debug0('v', "[v]procs updated\n"); } else { if_debug0('v', "[v]pdf14_update_device_color_procs_pop_c ERROR \n"); } return 0; } /* When a transparency group is pushed, the parent colorprocs are initialized. Since the color mapping procs are all based upon the device, we must have a nested list based upon the transparency group color space. This nesting must be outside the nested ctx structures to allow the nesting for the clist writer */ static void pdf14_push_parent_color(gx_device *dev, const gs_imager_state *pis) { pdf14_device *pdev = (pdf14_device *)dev; pdf14_parent_color_t *new_parent_color; if_debug0('v', "[v]pdf14_push_parent_color\n"); /* Allocate a new one */ new_parent_color = gs_alloc_struct(dev->memory, pdf14_parent_color_t,&st_pdf14_clr, "pdf14_clr_new"); /* Link to old one */ new_parent_color->previous = pdev->trans_group_parent_cmap_procs; /* Reassign new one to dev */ pdev->trans_group_parent_cmap_procs = new_parent_color; /* Initialize with values */ new_parent_color->get_cmap_procs = pis->get_cmap_procs; new_parent_color->parent_color_mapping_procs = pdev->procs.get_color_mapping_procs; new_parent_color->parent_color_comp_index = pdev->procs.get_color_comp_index; new_parent_color->parent_blending_procs = pdev->blend_procs; new_parent_color->polarity = pdev->color_info.polarity; new_parent_color->num_components = pdev->color_info.num_components; new_parent_color->unpack_procs = pdev->pdf14_procs; new_parent_color->depth = pdev->color_info.depth; memcpy(&(new_parent_color->comp_bits),&(pdev->color_info.comp_bits),GX_DEVICE_COLOR_MAX_COMPONENTS); memcpy(&(new_parent_color->comp_shift),&(pdev->color_info.comp_shift),GX_DEVICE_COLOR_MAX_COMPONENTS); /* isadditive is only used in ctx */ if (pdev->ctx) { new_parent_color->isadditive = pdev->ctx->additive; } } /* When a transparency group is popped, the parent colorprocs must be restored. Since the color mapping procs are all based upon the device, we must have a nested list based upon the transparency group color space. This nesting must be outside the nested ctx structures to allow the nesting for the clist writer */ static void pdf14_pop_parent_color(gx_device *dev, const gs_imager_state *pis) { pdf14_device *pdev = (pdf14_device *)dev; pdf14_parent_color_t *old_parent_color_info = pdev->trans_group_parent_cmap_procs; if_debug0('v', "[v]pdf14_pop_parent_color\n"); /* Update the link */ pdev->trans_group_parent_cmap_procs = old_parent_color_info->previous; /* Free the old one */ gs_free_object(dev->memory, old_parent_color_info, "pdf14_clr_free"); } static int pdf14_begin_transparency_mask(gx_device *dev, const gx_transparency_mask_params_t *ptmp, const gs_rect *pbbox, gs_imager_state *pis, gs_transparency_state_t **ppts, gs_memory_t *mem) { pdf14_device *pdev = (pdf14_device *)dev; byte bg_alpha = 255; byte *transfer_fn = (byte *)gs_alloc_bytes(pdev->ctx->memory, 256, "pdf14_begin_transparency_mask"); gs_int_rect rect; int code; int group_color_numcomps; gs_transparency_color_t group_color; if (transfer_fn == NULL) return_error(gs_error_VMerror); code = compute_group_device_int_rect(pdev, &rect, pbbox, pis); if (code < 0) return code; if (ptmp->Background_components) bg_alpha = (int)(255 * ptmp->GrayBackground + 0.5); if_debug1('v', "pdf14_begin_transparency_mask, bg_alpha = %d\n", bg_alpha); memcpy(transfer_fn, ptmp->transfer_fn, size_of(ptmp->transfer_fn)); /* If the group color is unknown, then we must use the previous group color space or the device process color space */ if (ptmp->group_color == UNKNOWN){ if (pdev->ctx->stack){ /* Use previous group color space */ group_color_numcomps = pdev->ctx->stack->n_chan-1; /* Remove alpha */ } else { /* Use process color space */ group_color_numcomps = pdev->color_info.num_components; } switch (group_color_numcomps) { case 1: group_color = GRAY_SCALE; break; case 3: group_color = DEVICE_RGB; break; case 4: group_color = DEVICE_CMYK; break; default: /* We can end up here if we are in a deviceN color space and we have a sep output device */ group_color = DEVICEN; break; } } else { group_color = ptmp->group_color; group_color_numcomps = ptmp->group_color_numcomps; } /* Always update the color mapping procs. Otherwise we end up fowarding to the target device. */ code = pdf14_update_device_color_procs(dev,group_color,pis); if (code < 0) return code; /* Note that the soft mask always follows the group color requirements even when we have a separable device */ return pdf14_push_transparency_mask(pdev->ctx, &rect, bg_alpha, transfer_fn, ptmp->idle, ptmp->replacing, ptmp->mask_id, ptmp->subtype, ptmp->SMask_is_CIE, group_color_numcomps, ptmp->Background_components, ptmp->Background, ptmp->GrayBackground); } static int pdf14_end_transparency_mask(gx_device *dev, gs_imager_state *pis, gs_transparency_mask_t **pptm) { pdf14_device *pdev = (pdf14_device *)dev; pdf14_parent_color_t *parent_color; int ok; if_debug0('v', "pdf14_end_transparency_mask\n"); ok = pdf14_pop_transparency_mask(pdev->ctx); /* May need to reset some color stuff related * to a mismatch between the Smask color space * and the Smask blending space */ if (pdev->ctx->stack != NULL ) { parent_color = &(pdev->ctx->stack->parent_color_info_procs); if (!(parent_color->parent_color_mapping_procs == NULL && parent_color->parent_color_comp_index == NULL)) { pis->get_cmap_procs = parent_color->get_cmap_procs;; gx_set_cmap_procs(pis, dev); pdev->procs.get_color_mapping_procs = parent_color->parent_color_mapping_procs; pdev->procs.get_color_comp_index = parent_color->parent_color_comp_index; pdev->color_info.polarity = parent_color->polarity; pdev->color_info.num_components = parent_color->num_components; pdev->color_info.depth = parent_color->depth; pdev->blend_procs = parent_color->parent_blending_procs; pdev->ctx->additive = parent_color->isadditive; pdev->pdf14_procs = parent_color->unpack_procs; parent_color->get_cmap_procs = NULL; parent_color->parent_color_comp_index = NULL; parent_color->parent_color_mapping_procs = NULL; memcpy(&(pdev->color_info.comp_bits),&(parent_color->comp_bits),GX_DEVICE_COLOR_MAX_COMPONENTS); memcpy(&(pdev->color_info.comp_shift),&(parent_color->comp_shift),GX_DEVICE_COLOR_MAX_COMPONENTS); } } return ok; } static int pdf14_mark_fill_rectangle(gx_device * dev, int x, int y, int w, int h, gx_color_index color) { pdf14_device *pdev = (pdf14_device *)dev; pdf14_buf *buf = pdev->ctx->stack; int i, j, k; byte *line, *dst_ptr; byte src[PDF14_MAX_PLANES]; byte dst[PDF14_MAX_PLANES]; gs_blend_mode_t blend_mode = pdev->blend_mode; bool additive = pdev->ctx->additive; int rowstride = buf->rowstride; int planestride = buf->planestride; bool has_alpha_g = buf->has_alpha_g; bool has_shape = buf->has_shape; int num_chan = buf->n_chan; int num_comp = num_chan - 1; int shape_off = num_chan * planestride; int alpha_g_off = shape_off + (has_shape ? planestride : 0); bool overprint = pdev->overprint; gx_color_index drawn_comps = pdev->drawn_comps; gx_color_index comps; byte shape = 0; /* Quiet compiler. */ byte src_alpha; if (buf->data == NULL) return 0; /* NB: gx_color_index is 4 or 8 bytes */ if (sizeof(color) <= sizeof(ulong)) if_debug8('v', "[v]pdf14_mark_fill_rectangle, (%d, %d), %d x %d color = %lx bm %d, nc %d, overprint %d\n", x, y, w, h, (ulong)color, blend_mode, num_chan, overprint); else if_debug9('v', "[v]pdf14_mark_fill_rectangle, (%d, %d), %d x %d color = %08lx%08lx bm %d, nc %d, overprint %d\n", x, y, w, h, (ulong)(color >> 8*(sizeof(color) - sizeof(ulong))), (ulong)color, blend_mode, num_chan, overprint); /* * Unpack the gx_color_index values. Complement the components for subtractive * color spaces. */ pdev->pdf14_procs->unpack_color(num_comp, color, pdev, src); src_alpha = src[num_comp] = (byte)floor (255 * pdev->alpha + 0.5); if (has_shape) shape = (byte)floor (255 * pdev->shape + 0.5); if (x < buf->rect.p.x) { w += x - buf->rect.p.x; x = buf->rect.p.x; } if (y < buf->rect.p.y) { h += y - buf->rect.p.y; y = buf->rect.p.y; } if (x + w > buf->rect.q.x) w = buf->rect.q.x - x; if (y + h > buf->rect.q.y) h = buf->rect.q.y - y; if (x < buf->bbox.p.x) buf->bbox.p.x = x; if (y < buf->bbox.p.y) buf->bbox.p.y = y; if (x + w > buf->bbox.q.x) buf->bbox.q.x = x + w; if (y + h > buf->bbox.q.y) buf->bbox.q.y = y + h; line = buf->data + (x - buf->rect.p.x) + (y - buf->rect.p.y) * rowstride; for (j = 0; j < h; ++j) { dst_ptr = line; for (i = 0; i < w; ++i) { /* Complement the components for subtractive color spaces */ if (additive) { for (k = 0; k < num_chan; ++k) dst[k] = dst_ptr[k * planestride]; } else { /* Complement the components for subtractive color spaces */ for (k = 0; k < num_comp; ++k) dst[k] = 255 - dst_ptr[k * planestride]; dst[num_comp] = dst_ptr[num_comp * planestride]; } art_pdf_composite_pixel_alpha_8(dst, src, num_comp, blend_mode, pdev->blend_procs); /* Complement the results for subtractive color spaces */ if (additive) { for (k = 0; k < num_chan; ++k) dst_ptr[k * planestride] = dst[k]; } else { if (overprint) { for (k = 0, comps = drawn_comps; comps != 0; ++k, comps >>= 1) { if ((comps & 0x1) != 0) { dst_ptr[k * planestride] = 255 - dst[k]; } } /* The alpha channel */ dst_ptr[num_comp * planestride] = dst[num_comp]; } else { for (k = 0; k < num_comp; ++k) dst_ptr[k * planestride] = 255 - dst[k]; dst_ptr[num_comp * planestride] = dst[num_comp]; } } if (has_alpha_g) { int tmp = (255 - dst_ptr[alpha_g_off]) * (255 - src_alpha) + 0x80; dst_ptr[alpha_g_off] = 255 - ((tmp + (tmp >> 8)) >> 8); } if (has_shape) { int tmp = (255 - dst_ptr[shape_off]) * (255 - shape) + 0x80; dst_ptr[shape_off] = 255 - ((tmp + (tmp >> 8)) >> 8); } ++dst_ptr; } line += rowstride; } #if 0 /* #if RAW_DUMP */ /* Dump the current buffer to see what we have. */ if(global_index/10.0 == (int) (global_index/10.0) ) dump_raw_buffer(pdev->ctx->stack->rect.q.y-pdev->ctx->stack->rect.p.y, pdev->ctx->stack->rect.q.x-pdev->ctx->stack->rect.p.x, pdev->ctx->stack->n_planes, pdev->ctx->stack->planestride, pdev->ctx->stack->rowstride, "Draw_Rect",pdev->ctx->stack->data); global_index++; #endif return 0; } static int pdf14_mark_fill_rectangle_ko_simple(gx_device * dev, int x, int y, int w, int h, gx_color_index color) { pdf14_device *pdev = (pdf14_device *)dev; pdf14_buf *buf = pdev->ctx->stack; int i, j, k; byte *line, *dst_ptr; byte src[PDF14_MAX_PLANES]; byte dst[PDF14_MAX_PLANES]; int rowstride = buf->rowstride; int planestride = buf->planestride; int num_chan = buf->n_chan; int num_comp = num_chan - 1; int shape_off = num_chan * planestride; bool has_shape = buf->has_shape; bool additive = pdev->ctx->additive; if (buf->data == NULL) return 0; if (sizeof(color) <= sizeof(ulong)) if_debug6('v', "[v]pdf14_mark_fill_rectangle_ko_simple, (%d, %d), %d x %d color = %lx, nc %d,\n", x, y, w, h, (ulong)color, num_chan); else if_debug7('v', "[v]pdf14_mark_fill_rectangle_ko_simple, (%d, %d), %d x %d color = %8lx%08lx, nc %d,\n", x, y, w, h, (ulong)(color >> 8*(sizeof(color) - sizeof(ulong))), (ulong)color, num_chan); /* * Unpack the gx_color_index values. Complement the components for subtractive * color spaces. */ pdev->pdf14_procs->unpack_color(num_comp, color, pdev, src); src[num_comp] = (byte)floor (255 * pdev->alpha + 0.5); if (x < buf->rect.p.x) { w += x - buf->rect.p.x; x = buf->rect.p.x; } if (y < buf->rect.p.y) { h += y - buf->rect.p.y; y = buf->rect.p.y; } if (x + w > buf->rect.q.x) w = buf->rect.q.x - x; if (y + h > buf->rect.q.y) h = buf->rect.q.y - y; if (x < buf->bbox.p.x) buf->bbox.p.x = x; if (y < buf->bbox.p.y) buf->bbox.p.y = y; if (x + w > buf->bbox.q.x) buf->bbox.q.x = x + w; if (y + h > buf->bbox.q.y) buf->bbox.q.y = y + h; line = buf->data + (x - buf->rect.p.x) + (y - buf->rect.p.y) * rowstride; for (j = 0; j < h; ++j) { dst_ptr = line; for (i = 0; i < w; ++i) { /* Complement the components for subtractive color spaces */ if (additive) { for (k = 0; k < num_chan; ++k) dst[k] = dst_ptr[k * planestride]; } else { for (k = 0; k < num_comp; ++k) dst[k] = 255 - dst_ptr[k * planestride]; dst[num_comp] = dst_ptr[num_comp * planestride]; } art_pdf_composite_knockout_simple_8(dst, has_shape ? dst_ptr + shape_off : NULL, src, num_comp, 255); /* ToDo: Review use of shape and opacity above. */ /* Complement the results for subtractive color spaces */ if (additive) { for (k = 0; k < num_chan; ++k) dst_ptr[k * planestride] = dst[k]; } else { for (k = 0; k < num_comp; ++k) dst_ptr[k * planestride] = 255 - dst[k]; dst_ptr[num_comp * planestride] = dst[num_comp]; } ++dst_ptr; } line += rowstride; } return 0; } /** * Here we have logic to override the cmap_procs with versions that * do not apply the transfer function. These copies should track the * versions in gxcmap.c. **/ static cmap_proc_gray(pdf14_cmap_gray_direct); static cmap_proc_rgb(pdf14_cmap_rgb_direct); static cmap_proc_cmyk(pdf14_cmap_cmyk_direct); static cmap_proc_gray(pdf14_cmap_gray_direct_group); static cmap_proc_rgb(pdf14_cmap_rgb_direct_group); static cmap_proc_cmyk(pdf14_cmap_cmyk_direct_group); static cmap_proc_rgb_alpha(pdf14_cmap_rgb_alpha_direct); static cmap_proc_separation(pdf14_cmap_separation_direct); static cmap_proc_devicen(pdf14_cmap_devicen_direct); static cmap_proc_is_halftoned(pdf14_cmap_is_halftoned); static const gx_color_map_procs pdf14_cmap_many = { pdf14_cmap_gray_direct, pdf14_cmap_rgb_direct, pdf14_cmap_cmyk_direct, pdf14_cmap_rgb_alpha_direct, pdf14_cmap_separation_direct, pdf14_cmap_devicen_direct, pdf14_cmap_is_halftoned }; static const gx_color_map_procs pdf14_cmap_many_group = { pdf14_cmap_gray_direct_group, pdf14_cmap_rgb_direct_group, pdf14_cmap_cmyk_direct_group, pdf14_cmap_rgb_alpha_direct, pdf14_cmap_separation_direct, pdf14_cmap_devicen_direct, pdf14_cmap_is_halftoned }; /** * Note: copied from gxcmap.c because it's inlined. **/ static inline void map_components_to_colorants(const frac * pcc, const gs_devicen_color_map * pcolor_component_map, frac * plist) { int i = pcolor_component_map->num_colorants - 1; int pos; /* Clear all output colorants first */ for (; i >= 0; i--) { plist[i] = frac_0; } /* Map color components into output list */ for (i = pcolor_component_map->num_components - 1; i >= 0; i--) { pos = pcolor_component_map->color_map[i]; if (pos >= 0) plist[pos] = pcc[i]; } } static void pdf14_cmap_gray_direct(frac gray, gx_device_color * pdc, const gs_imager_state * pis, gx_device * dev, gs_color_select_t select) { int i, ncomps = dev->color_info.num_components; frac cm_comps[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_value cv[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_index color; /* map to the color model */ dev_proc(dev, get_color_mapping_procs)(dev)->map_gray(dev, gray, cm_comps); for (i = 0; i < ncomps; i++) cv[i] = frac2cv(cm_comps[i]); /* encode as a color index */ color = dev_proc(dev, encode_color)(dev, cv); /* check if the encoding was successful; we presume failure is rare */ if (color != gx_no_color_index) color_set_pure(pdc, color); } static void pdf14_cmap_rgb_direct(frac r, frac g, frac b, gx_device_color * pdc, const gs_imager_state * pis, gx_device * dev, gs_color_select_t select) { int i, ncomps = dev->color_info.num_components; frac cm_comps[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_value cv[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_index color; /* map to the color model */ dev_proc(dev, get_color_mapping_procs)(dev)->map_rgb(dev, pis, r, g, b, cm_comps); for (i = 0; i < ncomps; i++) cv[i] = frac2cv(cm_comps[i]); /* encode as a color index */ color = dev_proc(dev, encode_color)(dev, cv); /* check if the encoding was successful; we presume failure is rare */ if (color != gx_no_color_index) color_set_pure(pdc, color); } static void pdf14_cmap_cmyk_direct(frac c, frac m, frac y, frac k, gx_device_color * pdc, const gs_imager_state * pis, gx_device * dev, gs_color_select_t select) { int i, ncomps = dev->color_info.num_components; frac cm_comps[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_value cv[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_index color; /* map to the color model */ dev_proc(dev, get_color_mapping_procs)(dev)->map_cmyk(dev, c, m, y, k, cm_comps); for (i = 0; i < ncomps; i++) cv[i] = frac2cv(cm_comps[i]); color = dev_proc(dev, encode_color)(dev, cv); if (color != gx_no_color_index) color_set_pure(pdc, color); } /* color mapping for when we have an smask or a isolated transparency group with another color space */ static void pdf14_cmap_gray_direct_group(frac gray, gx_device_color * pdc, const gs_imager_state * pis, gx_device * dev, gs_color_select_t select) { int i, ncomps = dev->color_info.num_components; frac cm_comps[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_value cv[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_index color; gx_device *trans_device; /* We may be coming from the clist writer which often forwards us the target device. If this occurs we actually need to get to the color space defined by the transparency group and we use the operators defined by the transparency device to do the job. */ if (pis->trans_device != NULL){ trans_device = pis->trans_device; } else { trans_device = dev; } ncomps = trans_device->color_info.num_components; /* If we are doing concretization of colors in an SMask or isolated group then just return the color as is */ if (ncomps == 1 ){ cv[0] = frac2cv(gray); /* encode as a color index */ color = pdf14_encode_smask_color(trans_device,cv,1); /* check if the encoding was successful; we presume failure is rare */ if (color != gx_no_color_index) color_set_pure(pdc, color); } else { /* map to the color model */ dev_proc(trans_device, get_color_mapping_procs)(trans_device)->map_gray(trans_device, gray, cm_comps); for (i = 0; i < ncomps; i++) cv[i] = frac2cv(cm_comps[i]); /* encode as a color index */ color = dev_proc(trans_device, encode_color)(trans_device, cv); /* check if the encoding was successful; we presume failure is rare */ if (color != gx_no_color_index) color_set_pure(pdc, color); } } /* color mapping for when we have an smask or a isolated transparency group with another color space */ static void pdf14_cmap_rgb_direct_group(frac r, frac g, frac b, gx_device_color * pdc, const gs_imager_state * pis, gx_device * dev, gs_color_select_t select) { int i, ncomps = dev->color_info.num_components; frac cm_comps[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_value cv[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_index color; gx_device *trans_device; /* We may be coming from the clist writer which often forwards us the target device. If this occurs we actually need to get to the color space defined by the transparency group and we use the operators defined by the transparency device to do the job. */ if (pis->trans_device != NULL){ trans_device = pis->trans_device; } else { trans_device = dev; } ncomps = trans_device->color_info.num_components; if ( ncomps == 3 ){ cv[0] = frac2cv(r); cv[1] = frac2cv(g); cv[2] = frac2cv(b); /* encode as a color index */ color = pdf14_encode_smask_color(trans_device,cv,3); /* check if the encoding was successful; we presume failure is rare */ if (color != gx_no_color_index) color_set_pure(pdc, color); } else { /* map to the device color model */ /* We can end up here, if for example we had a DeviceN color space with a CIE based alternate space and a output device that was RGB but a blending space that was CMYK. The proper way to solve this is to introduce another color space for the graphic state that has its own Joint CIE Cache between the source and a CMYK CRD (the transparency color space). The problem is that we can only have one CRD, which is defined by the output device. We will fix these issues with the new ICC base color architecture. */ dev_proc(trans_device, get_color_mapping_procs)(trans_device)->map_rgb(trans_device, pis, r, g, b, cm_comps); for (i = 0; i < ncomps; i++) cv[i] = frac2cv(cm_comps[i]); /* encode as a color index */ color = dev_proc(trans_device, encode_color)(trans_device, cv); /* check if the encoding was successful; we presume failure is rare */ if (color != gx_no_color_index) color_set_pure(pdc, color); } } /* color mapping for when we have an smask or a isolated transparency group with another color space */ static void pdf14_cmap_cmyk_direct_group(frac c, frac m, frac y, frac k, gx_device_color * pdc, const gs_imager_state * pis, gx_device * dev, gs_color_select_t select) { int i, ncomps = dev->color_info.num_components; frac cm_comps[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_value cv[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_index color; gx_device *trans_device; /* We may be coming from the clist writer which often forwards us the target device. If this occurs we actually need to get to the color space defined by the transparency group and we use the operators defined by the transparency device to do the job. */ if (pis->trans_device != NULL){ trans_device = pis->trans_device; } else { trans_device = dev; } ncomps = trans_device->color_info.num_components; if (ncomps == 4 ){ cv[0] = frac2cv(c); cv[1] = frac2cv(m); cv[2] = frac2cv(y); cv[3] = frac2cv(k); /* encode as a color index */ color = pdf14_encode_smask_color(trans_device,cv,4); /* check if the encoding was successful; we presume failure is rare */ if (color != gx_no_color_index) color_set_pure(pdc, color); } else { /* map to the color model */ dev_proc(trans_device, get_color_mapping_procs)(trans_device)->map_cmyk(trans_device, c, m, y, k, cm_comps); for (i = 0; i < ncomps; i++) cv[i] = frac2cv(cm_comps[i]); color = dev_proc(trans_device, encode_color)(trans_device, cv); if (color != gx_no_color_index) color_set_pure(pdc, color); } } static void pdf14_cmap_rgb_alpha_direct(frac r, frac g, frac b, frac alpha, gx_device_color * pdc, const gs_imager_state * pis, gx_device * dev, gs_color_select_t select) { int i, ncomps; frac cm_comps[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_value cv[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_index color; gx_device *trans_device; /* We may be coming from the clist writer which often forwards us the target device. If this occurs we actually need to get to the color space defined by the transparency group and we use the operators defined by the transparency device to do the job. */ if (pis->trans_device != NULL){ trans_device = pis->trans_device; } else { trans_device = dev; } ncomps = trans_device->color_info.num_components; /* map to the color model */ dev_proc(trans_device, get_color_mapping_procs)(trans_device)->map_rgb(trans_device, pis, r, g, b, cm_comps); /* pre-multiply to account for the alpha weighting */ if (alpha != frac_1) { #ifdef PREMULTIPLY_TOWARDS_WHITE frac alpha_bias = frac_1 - alpha; #else frac alpha_bias = 0; #endif for (i = 0; i < ncomps; i++) cm_comps[i] = (frac)((long)cm_comps[i] * alpha) / frac_1 + alpha_bias; } for (i = 0; i < ncomps; i++) cv[i] = frac2cv(cm_comps[i]); /* encode as a color index */ /* if (dev_proc(dev, map_rgb_alpha_color) != gx_default_map_rgb_alpha_color && (cv_alpha = frac2cv(alpha)) != gx_max_color_value) else color = dev_proc(dev, encode_color)(dev, cv); */ color = dev_proc(trans_device, encode_color)(trans_device, cv); /* check if the encoding was successful; we presume failure is rare */ if (color != gx_no_color_index) color_set_pure(pdc, color); } static void pdf14_cmap_separation_direct(frac all, gx_device_color * pdc, const gs_imager_state * pis, gx_device * dev, gs_color_select_t select) { int i, ncomps = dev->color_info.num_components; bool additive = dev->color_info.polarity == GX_CINFO_POLARITY_ADDITIVE; frac comp_value = all; frac cm_comps[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_value cv[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_index color; if (pis->color_component_map.sep_type == SEP_ALL) { /* * Invert the photometric interpretation for additive * color spaces because separations are always subtractive. */ if (additive) comp_value = frac_1 - comp_value; /* Use the "all" value for all components */ i = pis->color_component_map.num_colorants - 1; for (; i >= 0; i--) cm_comps[i] = comp_value; } else { /* map to the color model */ map_components_to_colorants(&comp_value, &(pis->color_component_map), cm_comps); } /* apply the transfer function(s); convert to color values */ if (additive) for (i = 0; i < ncomps; i++) cv[i] = frac2cv(gx_map_color_frac(pis, cm_comps[i], effective_transfer[i])); else for (i = 0; i < ncomps; i++) cv[i] = frac2cv(frac_1 - gx_map_color_frac(pis, (frac)(frac_1 - cm_comps[i]), effective_transfer[i])); /* encode as a color index */ color = dev_proc(dev, encode_color)(dev, cv); /* check if the encoding was successful; we presume failure is rare */ if (color != gx_no_color_index) color_set_pure(pdc, color); } static void pdf14_cmap_devicen_direct(const frac * pcc, gx_device_color * pdc, const gs_imager_state * pis, gx_device * dev, gs_color_select_t select) { int i, ncomps = dev->color_info.num_components; frac cm_comps[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_value cv[GX_DEVICE_COLOR_MAX_COMPONENTS]; gx_color_index color; gx_device *trans_device; /* We may be coming from the clist writer which often forwards us the target device. If this occurs we actually need to get to the color space defined by the transparency group and we use the operators defined by the transparency device to do the job. */ if (pis->trans_device != NULL){ trans_device = pis->trans_device; } else { trans_device = dev; } ncomps = trans_device->color_info.num_components; /* map to the color model */ map_components_to_colorants(pcc, &(pis->color_component_map), cm_comps);; /* apply the transfer function(s); convert to color values */ if (trans_device->color_info.polarity == GX_CINFO_POLARITY_ADDITIVE) for (i = 0; i < ncomps; i++) cv[i] = frac2cv(gx_map_color_frac(pis, cm_comps[i], effective_transfer[i])); else for (i = 0; i < ncomps; i++) cv[i] = frac2cv(frac_1 - gx_map_color_frac(pis, (frac)(frac_1 - cm_comps[i]), effective_transfer[i])); /* encode as a color index */ color = dev_proc(trans_device, encode_color)(trans_device, cv); /* check if the encoding was successful; we presume failure is rare */ if (color != gx_no_color_index) color_set_pure(pdc, color); } static bool pdf14_cmap_is_halftoned(const gs_imager_state * pis, gx_device * dev) { return false; } static const gx_color_map_procs * pdf14_get_cmap_procs(const gs_imager_state *pis, const gx_device * dev) { /* The pdf14 marking device itself is always continuous tone. */ return &pdf14_cmap_many; } static const gx_color_map_procs * pdf14_get_cmap_procs_group(const gs_imager_state *pis, const gx_device * dev) { /* The pdf14 marking device itself is always continuous tone. */ return &pdf14_cmap_many_group; } static int pdf14_pattern_manage(gx_device *pdev, gx_bitmap_id id, gs_pattern1_instance_t *pinst, pattern_manage_t function) { if (function == pattern_manage__shfill_doesnt_need_path) return 1; return gx_default_pattern_manage(pdev, id, pinst, function); } int gs_pdf14_device_push(gs_memory_t *mem, gs_imager_state * pis, gx_device ** pdev, gx_device * target, const gs_pdf14trans_t * pdf14pct) { pdf14_device * dev_proto; pdf14_device * p14dev, temp_dev_proto; int code; if_debug0('v', "[v]gs_pdf14_device_push\n"); code = get_pdf14_device_proto(target, &dev_proto, &temp_dev_proto, pis, pdf14pct); if (code < 0) return code; code = gs_copydevice((gx_device **) &p14dev, (const gx_device *) dev_proto, mem); if (code < 0) return code; gs_pdf14_device_copy_params((gx_device *)p14dev, target); rc_assign(p14dev->target, target, "gs_pdf14_device_push"); check_device_separable((gx_device *)p14dev); gx_device_fill_in_procs((gx_device *)p14dev); p14dev->save_get_cmap_procs = pis->get_cmap_procs; pis->get_cmap_procs = pdf14_get_cmap_procs; gx_set_cmap_procs(pis, (gx_device *)p14dev); code = dev_proc((gx_device *) p14dev, open_device) ((gx_device *) p14dev); *pdev = (gx_device *) p14dev; pdf14_set_marking_params((gx_device *)p14dev, pis); p14dev->trans_group_parent_cmap_procs = NULL; #if RAW_DUMP /* Dump the current buffer to see what we have. */ dump_raw_buffer(p14dev->ctx->stack->rect.q.y-p14dev->ctx->stack->rect.p.y, p14dev->ctx->stack->rect.q.x-p14dev->ctx->stack->rect.p.x, p14dev->ctx->stack->n_planes, p14dev->ctx->stack->planestride, p14dev->ctx->stack->rowstride, "Device_Push",p14dev->ctx->stack->data); global_index++; #endif return code; } /* * In a modest violation of good coding practice, the gs_composite_common * fields are "known" to be simple (contain no pointers to garbage * collected memory), and we also know the gs_pdf14trans_params_t structure * to be simple, so we just create a trivial structure descriptor for the * entire gs_pdf14trans_s structure. */ #define private_st_gs_pdf14trans_t()\ gs_private_st_ptrs1(st_pdf14trans, gs_pdf14trans_t, "gs_pdf14trans_t",\ st_pdf14trans_enum_ptrs, st_pdf14trans_reloc_ptrs, params.transfer_function) /* GC descriptor for gs_pdf14trans_t */ private_st_gs_pdf14trans_t(); /* * Check for equality of two PDF 1.4 transparency compositor objects. * * We are currently always indicating that PDF 1.4 transparency compositors are * equal. Two transparency compositors may have teh same data but still * represent separate actions. (E.g. two PDF14_BEGIN_TRANS_GROUP compositor * operations in a row mean that we are creating a group inside of a group. */ static bool c_pdf14trans_equal(const gs_composite_t * pct0, const gs_composite_t * pct1) { return false; } #ifdef DEBUG static const char * pdf14_opcode_names[] = PDF14_OPCODE_NAMES; #endif #define put_value(dp, value)\ BEGIN\ memcpy(dp, &value, sizeof(value));\ dp += sizeof(value);\ END static inline int c_pdf14trans_write_ctm(byte **ppbuf, const gs_pdf14trans_params_t *pparams) { /* Note: We can't skip writing CTM if it is equal to pis->ctm, because clist writer may skip this command for some bands. For a better result we need individual CTM for each band. */ byte *pbuf = *ppbuf; int len, code; len = cmd_write_ctm_return_length_nodevice(&pparams->ctm); pbuf--; /* For cmd_write_ctm. */ code = cmd_write_ctm(&pparams->ctm, pbuf, len); if (code < 0) return code; pbuf += len + 1; *ppbuf = pbuf; return 0; } /* * Convert a PDF 1.4 transparency compositor to string form for use by the command * list device. */ static int c_pdf14trans_write(const gs_composite_t * pct, byte * data, uint * psize, gx_device_clist_writer *cdev) { const gs_pdf14trans_params_t * pparams = &((const gs_pdf14trans_t *)pct)->params; int need, avail = *psize; byte buf[MAX_CLIST_TRANSPARENCY_BUFFER_SIZE]; /* Must be large enough to fit the data written below. We don't implement a dynamic check for the buffer owerflow, assuming that the consistency is verified in the coding phase. See the definition of MAX_CLIST_TRANSPARENCY_BUFFER_SIZE. */ byte * pbuf = buf; int opcode = pparams->pdf14_op; int mask_size = 0; uint mask_id = 0; int code; *pbuf++ = opcode; /* 1 byte */ switch (opcode) { default: /* Should not occur. */ break; case PDF14_PUSH_DEVICE: put_value(pbuf, pparams->num_spot_colors); break; case PDF14_POP_DEVICE: code = 0; break; case PDF14_END_TRANS_GROUP: break; /* No data */ case PDF14_BEGIN_TRANS_GROUP: code = c_pdf14trans_write_ctm(&pbuf, pparams); if (code < 0) return code; *pbuf++ = (pparams->Isolated & 1) + ((pparams->Knockout & 1) << 1); *pbuf++ = pparams->blend_mode; *pbuf++ = pparams->group_color; put_value(pbuf, pparams->group_color_numcomps); put_value(pbuf, pparams->opacity.alpha); put_value(pbuf, pparams->shape.alpha); put_value(pbuf, pparams->bbox); mask_id = pparams->mask_id; put_value(pbuf, pparams->mask_id); break; case PDF14_BEGIN_TRANS_MASK: code = c_pdf14trans_write_ctm(&pbuf, pparams); if (code < 0) return code; put_value(pbuf, pparams->subtype); *pbuf++ = pparams->group_color; put_value(pbuf, pparams->group_color_numcomps); *pbuf++ = pparams->replacing; *pbuf++ = pparams->function_is_identity; *pbuf++ = pparams->Background_components; put_value(pbuf, pparams->bbox); mask_id = pparams->mask_id; put_value(pbuf, pparams->mask_id); if (pparams->Background_components) { const int l = sizeof(pparams->Background[0]) * pparams->Background_components; memcpy(pbuf, pparams->Background, l); pbuf += l; memcpy(pbuf, &pparams->GrayBackground, sizeof(pparams->GrayBackground)); pbuf += sizeof(pparams->GrayBackground); } if (!pparams->function_is_identity) mask_size = sizeof(pparams->transfer_fn); break; case PDF14_END_TRANS_MASK: break; case PDF14_SET_BLEND_PARAMS: *pbuf++ = pparams->changed; if (pparams->changed & PDF14_SET_BLEND_MODE) *pbuf++ = pparams->blend_mode; if (pparams->changed & PDF14_SET_TEXT_KNOCKOUT) *pbuf++ = pparams->text_knockout; if (pparams->changed & PDF14_SET_OPACITY_ALPHA) put_value(pbuf, pparams->opacity.alpha); if (pparams->changed & PDF14_SET_SHAPE_ALPHA) put_value(pbuf, pparams->shape.alpha); if (pparams->changed & PDF14_SET_OVERPRINT) put_value(pbuf, pparams->overprint); if (pparams->changed & PDF14_SET_OVERPRINT_MODE) put_value(pbuf, pparams->overprint_mode); break; case PDF14_PUSH_TRANS_STATE: break; case PDF14_POP_TRANS_STATE: break; } /* check for fit */ need = (pbuf - buf) + mask_size; *psize = need; if (need > avail) { if (avail) return_error(gs_error_rangecheck); else return gs_error_rangecheck; } /* If we are writing more than the maximum ever expected, * return a rangecheck error. */ if ( need + 3 > MAX_CLIST_COMPOSITOR_SIZE ) return_error(gs_error_rangecheck); /* Copy our serialzed data into the output buffer */ memcpy(data, buf, need - mask_size); if (mask_size) /* Include the transfer mask data if present */ memcpy(data + need - mask_size, pparams->transfer_fn, mask_size); if_debug3('v', "[v] c_pdf14trans_write: opcode = %s mask_id=%d need = %d\n", pdf14_opcode_names[opcode], mask_id, need); return 0; } #undef put_value /* Function prototypes */ static int gs_create_pdf14trans( gs_composite_t ** ppct, const gs_pdf14trans_params_t * pparams, gs_memory_t * mem ); #define read_value(dp, value)\ BEGIN\ memcpy(&value, dp, sizeof(value));\ dp += sizeof(value);\ END /* * Convert the string representation of the PDF 1.4 transparency parameter * into the full compositor. */ static int c_pdf14trans_read(gs_composite_t * * ppct, const byte * data, uint size, gs_memory_t * mem ) { gs_pdf14trans_params_t params = {0}; const byte * start = data; int used, code = 0; if (size < 1) return_error(gs_error_rangecheck); /* Read PDF 1.4 compositor data from the clist */ params.pdf14_op = *data++; if_debug2('v', "[v] c_pdf14trans_read: opcode = %s avail = %d", pdf14_opcode_names[params.pdf14_op], size); memset(¶ms.ctm, 0, sizeof(params.ctm)); switch (params.pdf14_op) { default: /* Should not occur. */ break; case PDF14_PUSH_DEVICE: read_value(data, params.num_spot_colors); break; case PDF14_POP_DEVICE: code += 0; /* A good place for a breakpoint. */ break; case PDF14_END_TRANS_GROUP: code += 0; /* A good place for a breakpoint. */ break; /* No data */ case PDF14_PUSH_TRANS_STATE: break; case PDF14_POP_TRANS_STATE: break; case PDF14_BEGIN_TRANS_GROUP: /* * We are currently not using the bbox or the colorspace so they were * not placed in the clist */ data = cmd_read_matrix(¶ms.ctm, data); params.Isolated = (*data) & 1; params.Knockout = (*data++ >> 1) & 1; params.blend_mode = *data++; params.group_color = *data++; /* Trans group color */ read_value(data,params.group_color_numcomps); /* color group size */ read_value(data, params.opacity.alpha); read_value(data, params.shape.alpha); read_value(data, params.bbox); read_value(data, params.mask_id); break; case PDF14_BEGIN_TRANS_MASK: /* This is the largest transparency parameter at this time (potentially * 1275 bytes in size if Background_components = * GS_CLIENT_COLOR_MAX_COMPONENTS and we have a transfer function * as well). * * NOTE: * The clist reader must be able to handle this sized device. * If any changes are made here the #define MAX_CLIST_COMPOSITOR_SIZE * may also need to be changed correspondingly (defined in gstparam.h) * Also... if another compositor param should exceed this size, this * same condition applies. */ data = cmd_read_matrix(¶ms.ctm, data); read_value(data, params.subtype); params.group_color = *data++; read_value(data, params.group_color_numcomps); params.replacing = *data++; params.function_is_identity = *data++; params.Background_components = *data++; read_value(data, params.bbox); read_value(data, params.mask_id); if (params.Background_components) { const int l = sizeof(params.Background[0]) * params.Background_components; memcpy(params.Background, data, l); data += l; memcpy(¶ms.GrayBackground, data, sizeof(params.GrayBackground)); data += sizeof(params.GrayBackground); } if (params.function_is_identity) { int i; for (i = 0; i < MASK_TRANSFER_FUNCTION_SIZE; i++) { params.transfer_fn[i] = (byte)floor(i * (255.0 / (MASK_TRANSFER_FUNCTION_SIZE - 1)) + 0.5); } } else { read_value(data, params.transfer_fn); } break; case PDF14_END_TRANS_MASK: break; case PDF14_SET_BLEND_PARAMS: params.changed = *data++; if (params.changed & PDF14_SET_BLEND_MODE) params.blend_mode = *data++; if (params.changed & PDF14_SET_TEXT_KNOCKOUT) params.text_knockout = *data++; if (params.changed & PDF14_SET_OPACITY_ALPHA) read_value(data, params.opacity.alpha); if (params.changed & PDF14_SET_SHAPE_ALPHA) read_value(data, params.shape.alpha); if (params.changed & PDF14_SET_OVERPRINT) read_value(data, params.overprint); if (params.changed & PDF14_SET_OVERPRINT_MODE) read_value(data, params.overprint_mode); break; } code = gs_create_pdf14trans(ppct, ¶ms, mem); if (code < 0) return code; used = data - start; if_debug2('v', " mask_id=%d used = %d\n", params.mask_id, used); /* If we read more than the maximum expected, return a rangecheck error */ if ( used + 3 > MAX_CLIST_COMPOSITOR_SIZE ) return_error(gs_error_rangecheck); else return used; } /* * Adjust the compositor's CTM. */ static int c_pdf14trans_adjust_ctm(gs_composite_t * pct0, int x0, int y0, gs_imager_state *pis) { gs_pdf14trans_t *pct = (gs_pdf14trans_t *)pct0; gs_matrix mat = pct->params.ctm; if_debug6('L', " [%g %g %g %g %g %g]\n", mat.xx, mat.xy, mat.yx, mat.yy, mat.tx, mat.ty); mat.tx -= x0; mat.ty -= y0; gs_imager_setmatrix(pis, &mat); return 0; } /* * Create a PDF 1.4 transparency compositor. * * Note that this routine will be called only if the device is not already * a PDF 1.4 transparency compositor. */ static int c_pdf14trans_create_default_compositor(const gs_composite_t * pct, gx_device ** pp14dev, gx_device * tdev, gs_imager_state * pis, gs_memory_t * mem) { const gs_pdf14trans_t * pdf14pct = (const gs_pdf14trans_t *) pct; gx_device * p14dev = NULL; int code = 0; /* * We only handle the push operation. All other operations are ignored. * The other operations will be handled by the create_compositor routine * for the PDF 1.4 compositing device. */ switch (pdf14pct->params.pdf14_op) { case PDF14_PUSH_DEVICE: code = gs_pdf14_device_push(mem, pis, &p14dev, tdev, pdf14pct); *pp14dev = p14dev; break; default: *pp14dev = tdev; break; } return code; } /* * Find an opening compositor op. */ static int find_opening_op(int opening_op, gs_composite_t **ppcte, int return_code) { /* Assuming a right *BEGIN* - *END* operation balance. */ gs_composite_t *pcte = *ppcte; for (;;) { if (pcte->type->comp_id == GX_COMPOSITOR_PDF14_TRANS) { gs_pdf14trans_t *pct = (gs_pdf14trans_t *)pcte; int op = pct->params.pdf14_op; *ppcte = pcte; if (op == opening_op) return return_code; if (op != PDF14_SET_BLEND_PARAMS) { if (opening_op == PDF14_BEGIN_TRANS_MASK) return 0; if (opening_op == PDF14_BEGIN_TRANS_GROUP) { if (op != PDF14_BEGIN_TRANS_MASK && op != PDF14_END_TRANS_MASK) return 0; } if (opening_op == PDF14_PUSH_DEVICE) { if (op != PDF14_BEGIN_TRANS_MASK && op != PDF14_END_TRANS_MASK && op != PDF14_BEGIN_TRANS_GROUP && op != PDF14_END_TRANS_GROUP) return 0; } } } else return 0; pcte = pcte->prev; if (pcte == NULL) return 2; /* Not in queue. */ } } /* * Find an opening compositor op. */ static int find_same_op(const gs_composite_t *this, int my_op, gs_composite_t **ppcte) { const gs_pdf14trans_t *pct0 = (gs_pdf14trans_t *)this; gs_composite_t *pct = *ppcte; for (;;) { if (pct->type->comp_id == GX_COMPOSITOR_PDF14_TRANS) { gs_pdf14trans_t *pct_pdf14 = (gs_pdf14trans_t *)pct; *ppcte = pct; if (pct_pdf14->params.pdf14_op != my_op) return 0; if (pct_pdf14->params.csel == pct0->params.csel) return 4; } else return 0; pct = pct->prev; if (pct == NULL) return 0; /* Not in queue. */ } } /* * Check for closing compositor. */ static int c_pdf14trans_is_closing(const gs_composite_t * this, gs_composite_t ** ppcte, gx_device *dev) { gs_pdf14trans_t *pct0 = (gs_pdf14trans_t *)this; int op0 = pct0->params.pdf14_op; switch (op0) { default: return_error(gs_error_unregistered); /* Must not happen. */ case PDF14_PUSH_DEVICE: return 0; case PDF14_POP_DEVICE: if (*ppcte == NULL) return 0; else { int code = find_opening_op(PDF14_PUSH_DEVICE, ppcte, 1); if (code == 1) return 5; return code; } case PDF14_BEGIN_TRANS_GROUP: return 0; case PDF14_END_TRANS_GROUP: if (*ppcte == NULL) return 2; return find_opening_op(PDF14_BEGIN_TRANS_GROUP, ppcte, 6); case PDF14_BEGIN_TRANS_MASK: return 0; case PDF14_PUSH_TRANS_STATE: return 0; case PDF14_POP_TRANS_STATE: return 0; case PDF14_END_TRANS_MASK: if (*ppcte == NULL) return 2; return find_opening_op(PDF14_BEGIN_TRANS_MASK, ppcte, 6); case PDF14_SET_BLEND_PARAMS: if (*ppcte == NULL) return 0; /* hack : ignore csel - here it is always zero : */ return find_same_op(this, PDF14_SET_BLEND_PARAMS, ppcte); } } /* * Check whether a next operation is friendly to the compositor. */ static bool c_pdf14trans_is_friendly(const gs_composite_t * this, byte cmd0, byte cmd1) { gs_pdf14trans_t *pct0 = (gs_pdf14trans_t *)this; int op0 = pct0->params.pdf14_op; if (op0 == PDF14_PUSH_DEVICE || op0 == PDF14_END_TRANS_GROUP) { /* Halftone commands are always passed to the target printer device, because transparency buffers are always contone. So we're safe to execute them before queued transparency compositors. */ if (cmd0 == cmd_opv_extend && (cmd1 == cmd_opv_ext_put_halftone || cmd1 == cmd_opv_ext_put_ht_seg)) return true; if (cmd0 == cmd_opv_set_misc && (cmd1 >> 6) == (cmd_set_misc_map >> 6)) return true; } return false; } static composite_create_default_compositor_proc(c_pdf14trans_create_default_compositor); static composite_equal_proc(c_pdf14trans_equal); static composite_write_proc(c_pdf14trans_write); static composite_read_proc(c_pdf14trans_read); static composite_adjust_ctm_proc(c_pdf14trans_adjust_ctm); static composite_is_closing_proc(c_pdf14trans_is_closing); static composite_is_friendly_proc(c_pdf14trans_is_friendly); static composite_clist_write_update(c_pdf14trans_clist_write_update); static composite_clist_read_update(c_pdf14trans_clist_read_update); static composite_get_cropping_proc(c_pdf14trans_get_cropping); /* * Methods for the PDF 1.4 transparency compositor * * Note: We have two set of methods. They are the same except for the * composite_clist_write_update method. Once the clist write device is created, * we use the second set of procedures. This prevents the creation of multiple * PDF 1.4 clist write compositor devices being chained together. */ const gs_composite_type_t gs_composite_pdf14trans_type = { GX_COMPOSITOR_PDF14_TRANS, { c_pdf14trans_create_default_compositor, /* procs.create_default_compositor */ c_pdf14trans_equal, /* procs.equal */ c_pdf14trans_write, /* procs.write */ c_pdf14trans_read, /* procs.read */ c_pdf14trans_adjust_ctm, /* procs.adjust_ctm */ c_pdf14trans_is_closing, /* procs.is_closing */ c_pdf14trans_is_friendly, /* procs.is_friendly */ /* Create a PDF 1.4 clist write device */ c_pdf14trans_clist_write_update, /* procs.composite_clist_write_update */ c_pdf14trans_clist_read_update, /* procs.composite_clist_reade_update */ c_pdf14trans_get_cropping /* procs.composite_get_cropping */ } /* procs */ }; const gs_composite_type_t gs_composite_pdf14trans_no_clist_writer_type = { GX_COMPOSITOR_PDF14_TRANS, { c_pdf14trans_create_default_compositor, /* procs.create_default_compositor */ c_pdf14trans_equal, /* procs.equal */ c_pdf14trans_write, /* procs.write */ c_pdf14trans_read, /* procs.read */ c_pdf14trans_adjust_ctm, /* procs.adjust_ctm */ c_pdf14trans_is_closing, /* procs.is_closing */ c_pdf14trans_is_friendly, /* procs.is_friendly */ /* The PDF 1.4 clist writer already exists, Do not create it. */ gx_default_composite_clist_write_update, /* procs.composite_clist_write_update */ c_pdf14trans_clist_read_update, /* procs.composite_clist_reade_update */ c_pdf14trans_get_cropping /* procs.composite_get_cropping */ } /* procs */ }; /* * Verify that a compositor data structure is for the PDF 1.4 compositor. */ int gs_is_pdf14trans_compositor(const gs_composite_t * pct) { return (pct->type == &gs_composite_pdf14trans_type || pct->type == &gs_composite_pdf14trans_no_clist_writer_type); } /* * Create a PDF 1.4 transparency compositor data structure. */ static int gs_create_pdf14trans( gs_composite_t ** ppct, const gs_pdf14trans_params_t * pparams, gs_memory_t * mem ) { gs_pdf14trans_t * pct; pct = gs_alloc_struct(mem, gs_pdf14trans_t, &st_pdf14trans, "gs_create_pdf14trans"); if (pct == NULL) return_error(gs_error_VMerror); pct->type = &gs_composite_pdf14trans_type; pct->id = gs_next_ids(mem, 1); pct->params = *pparams; pct->idle = false; *ppct = (gs_composite_t *)pct; return 0; } /* * Send a PDF 1.4 transparency compositor action to the specified device. */ int send_pdf14trans(gs_imager_state * pis, gx_device * dev, gx_device * * pcdev, gs_pdf14trans_params_t * pparams, gs_memory_t * mem) { gs_composite_t * pct = NULL; int code; pparams->ctm = ctm_only(pis); code = gs_create_pdf14trans(&pct, pparams, mem); if (code < 0) return code; code = dev_proc(dev, create_compositor) (dev, pcdev, pct, pis, mem); gs_free_object(pis->memory, pct, "send_pdf14trans"); return code; } /* ------------- PDF 1.4 transparency device for clist writing ------------- */ /* * The PDF 1.4 transparency compositor device may have a different process * color model than the output device. If we are banding then we need to * create two compositor devices. The output side (clist reader) needs a * compositor to actually composite the output. We also need a compositor * device before the clist writer. This is needed to provide a process color * model which matches the PDF 1.4 blending space. * * This section provides support for this device. */ /* * Define the default pre-clist (clist writer) PDF 1.4 compositing device. * We actually use the same structure for both the clist writer and reader * devices. However we use separate names to identify the routines for each * device. */ #define pdf14_clist_procs(get_color_mapping_procs, get_color_comp_index,\ encode_color, decode_color) \ {\ NULL, /* open */\ gx_forward_get_initial_matrix, /* get_initial_matrix */\ gx_forward_sync_output, /* sync_output */\ gx_forward_output_page, /* output_page */\ gx_forward_close_device, /* close_device */\ encode_color, /* rgb_map_rgb_color */\ decode_color, /* map_color_rgb */\ gx_forward_fill_rectangle, /* fill_rectangle */\ gx_forward_tile_rectangle, /* tile_rectangle */\ gx_forward_copy_mono, /* copy_mono */\ gx_forward_copy_color, /* copy_color */\ NULL , /* draw_line - obsolete */\ gx_forward_get_bits, /* get_bits */\ gx_forward_get_params, /* get_params */\ pdf14_put_params, /* put_params */\ encode_color, /* map_cmyk_color */\ gx_forward_get_xfont_procs, /* get_xfont_procs */\ gx_forward_get_xfont_device, /* get_xfont_device */\ NULL, /* map_rgb_alpha_color */\ gx_forward_get_page_device, /* get_page_device */\ gx_forward_get_alpha_bits, /* get_alpha_bits */\ NULL, /* copy_alpha */\ gx_forward_get_band, /* get_band */\ gx_forward_copy_rop, /* copy_rop */\ pdf14_clist_fill_path, /* fill_path */\ pdf14_clist_stroke_path, /* stroke_path */\ gx_forward_fill_mask, /* fill_mask */\ gx_forward_fill_trapezoid, /* fill_trapezoid */\ gx_forward_fill_parallelogram, /* fill_parallelogram */\ gx_forward_fill_triangle, /* fill_triangle */\ gx_forward_draw_thin_line, /* draw_thin_line */\ pdf14_clist_begin_image, /* begin_image */\ gx_forward_image_data, /* image_data */\ gx_forward_end_image, /* end_image */\ gx_forward_strip_tile_rectangle, /* strip_tile_rectangle */\ gx_forward_strip_copy_rop, /* strip_copy_rop, */\ gx_forward_get_clipping_box, /* get_clipping_box */\ pdf14_clist_begin_typed_image, /* begin_typed_image */\ gx_forward_get_bits_rectangle, /* get_bits_rectangle */\ NULL, /* map_color_rgb_alpha */\ pdf14_clist_create_compositor, /* create_compositor */\ gx_forward_get_hardware_params, /* get_hardware_params */\ pdf14_clist_text_begin, /* text_begin */\ NULL, /* finish_copydevice */\ pdf14_begin_transparency_group,\ pdf14_end_transparency_group,\ pdf14_begin_transparency_mask,\ pdf14_end_transparency_mask,\ NULL, /* discard_transparency_layer */\ get_color_mapping_procs, /* get_color_mapping_procs */\ get_color_comp_index, /* get_color_comp_index */\ encode_color, /* encode_color */\ decode_color, /* decode_color */\ clist_pattern_manage, /* pattern_manage */\ NULL, /* fill_rectangle_hl_color */\ NULL, /* include_color_space */\ NULL, /* fill_linear_color_scanline */\ NULL, /* fill_linear_color_trapezoid */\ NULL, /* fill_linear_color_triangle */\ gx_forward_update_spot_equivalent_colors, /* update spot */\ gx_forward_ret_devn_params, /* gx_forward_ret_devn_params */\ gx_forward_fillpage,\ pdf14_push_transparency_state,\ pdf14_pop_transparency_state\ } static dev_proc_create_compositor(pdf14_clist_create_compositor); static dev_proc_create_compositor(pdf14_clist_forward_create_compositor); static dev_proc_fill_path(pdf14_clist_fill_path); static dev_proc_stroke_path(pdf14_clist_stroke_path); static dev_proc_text_begin(pdf14_clist_text_begin); static dev_proc_begin_image(pdf14_clist_begin_image); static dev_proc_begin_typed_image(pdf14_clist_begin_typed_image); static const gx_device_procs pdf14_clist_Gray_procs = pdf14_clist_procs(gx_default_DevGray_get_color_mapping_procs, gx_default_DevGray_get_color_comp_index, pdf14_encode_color, pdf14_decode_color); static const gx_device_procs pdf14_clist_RGB_procs = pdf14_clist_procs(gx_default_DevRGB_get_color_mapping_procs, gx_default_DevRGB_get_color_comp_index, pdf14_encode_color, pdf14_decode_color); static const gx_device_procs pdf14_clist_CMYK_procs = pdf14_clist_procs(gx_default_DevCMYK_get_color_mapping_procs, gx_default_DevCMYK_get_color_comp_index, pdf14_encode_color, pdf14_decode_color); static const gx_device_procs pdf14_clist_CMYKspot_procs = pdf14_clist_procs(pdf14_cmykspot_get_color_mapping_procs, pdf14_cmykspot_get_color_comp_index, pdf14_compressed_encode_color, pdf14_compressed_decode_color); static const gx_device_procs pdf14_clist_custom_procs = pdf14_clist_procs(gx_forward_get_color_mapping_procs, gx_forward_get_color_comp_index, gx_forward_encode_color, gx_forward_decode_color); const pdf14_clist_device pdf14_clist_Gray_device = { std_device_color_stype_body(pdf14_clist_device, &pdf14_clist_Gray_procs, "pdf14clistgray", &st_pdf14_device, XSIZE, YSIZE, X_DPI, Y_DPI, 8, 255, 256), { 0 }, /* Procs */ NULL, /* target */ { 0 }, /* devn_params - not used */ &gray_pdf14_procs, &gray_blending_procs }; const pdf14_clist_device pdf14_clist_RGB_device = { std_device_color_stype_body(pdf14_clist_device, &pdf14_clist_RGB_procs, "pdf14clistRGB", &st_pdf14_device, XSIZE, YSIZE, X_DPI, Y_DPI, 24, 255, 256), { 0 }, /* Procs */ NULL, /* target */ { 0 }, /* devn_params - not used */ &rgb_pdf14_procs, &rgb_blending_procs }; const pdf14_clist_device pdf14_clist_CMYK_device = { std_device_std_color_full_body_type(pdf14_clist_device, &pdf14_clist_CMYK_procs, "pdf14clistcmyk", &st_pdf14_device, XSIZE, YSIZE, X_DPI, Y_DPI, 32, 0, 0, 0, 0, 0, 0), { 0 }, /* Procs */ NULL, /* target */ { 0 }, /* devn_params - not used */ &cmyk_pdf14_procs, &cmyk_blending_procs }; const pdf14_clist_device pdf14_clist_CMYKspot_device = { std_device_part1_(pdf14_device, &pdf14_clist_CMYKspot_procs, "pdf14clistcmykspot", &st_pdf14_device, open_init_closed), dci_values(GX_DEVICE_COLOR_MAX_COMPONENTS,64,255,255,256,256), std_device_part2_(XSIZE, YSIZE, X_DPI, Y_DPI), offset_margin_values(0, 0, 0, 0, 0, 0), std_device_part3_(), { 0 }, /* Procs */ NULL, /* target */ /* DeviceN parameters */ { 8, /* Not used - Bits per color */ DeviceCMYKComponents, /* Names of color model colorants */ 4, /* Number colorants for CMYK */ 0, /* MaxSeparations has not been specified */ -1, /* PageSpotColors has not been specified */ {0}, /* SeparationNames */ 0, /* SeparationOrder names */ {0, 1, 2, 3, 4, 5, 6, 7 } /* Initial component SeparationOrder */ }, &cmykspot_pdf14_procs, &cmyk_blending_procs }; const pdf14_clist_device pdf14_clist_custom_device = { std_device_part1_(pdf14_device, &pdf14_clist_CMYKspot_procs, "pdf14clistcustom", &st_pdf14_device, open_init_closed), dci_values(GX_DEVICE_COLOR_MAX_COMPONENTS,64,255,255,256,256), std_device_part2_(XSIZE, YSIZE, X_DPI, Y_DPI), offset_margin_values(0, 0, 0, 0, 0, 0), std_device_part3_(), { 0 }, /* Procs */ NULL, /* target */ /* DeviceN parameters */ { 8, /* Not used - Bits per color */ DeviceCMYKComponents, /* Names of color model colorants */ 4, /* Number colorants for CMYK */ 0, /* MaxSeparations has not been specified */ -1, /* PageSpotColors has not been specified */ {0}, /* SeparationNames */ 0, /* SeparationOrder names */ {0, 1, 2, 3, 4, 5, 6, 7 } /* Initial component SeparationOrder */ }, &custom_pdf14_procs, &custom_blending_procs }; /* * the PDF 1.4 transparency spec says that color space for blending * operations can be based upon either a color space specified in the * group or a default value based upon the output device. We are * currently only using a color space based upon the device. */ static int get_pdf14_clist_device_proto(gx_device * dev, pdf14_clist_device ** pdevproto, pdf14_clist_device * ptempdevproto, gs_imager_state * pis, const gs_pdf14trans_t * pdf14pct) { pdf14_default_colorspace_t dev_cs = pdf14_determine_default_blend_cs(dev); switch (dev_cs) { case PDF14_DeviceGray: *pdevproto = (pdf14_clist_device *)&pdf14_clist_Gray_device; /* We want gray to be single channel. Low level initialization of gray device prototype is peculiar in that in dci_std_color_num_components the comment is "A device is monochrome only if it is bi-level" Here we want monochrome anytime we have a gray device. To avoid breaking things elsewhere, we will overide the prototype intialization here */ *ptempdevproto = **pdevproto; ptempdevproto->color_info.max_components = 1; ptempdevproto->color_info.num_components = ptempdevproto->color_info.max_components; *pdevproto = ptempdevproto; break; case PDF14_DeviceRGB: *pdevproto = (pdf14_clist_device *)&pdf14_clist_RGB_device; break; case PDF14_DeviceCMYK: *pdevproto = (pdf14_clist_device *)&pdf14_clist_CMYK_device; break; case PDF14_DeviceCMYKspot: *pdevproto = (pdf14_clist_device *)&pdf14_clist_CMYKspot_device; /* * The number of components for the PDF14 device is the sum * of the process components and the number of spot colors * for the page. */ if (pdf14pct->params.num_spot_colors >= 0) { *ptempdevproto = **pdevproto; ptempdevproto->devn_params.page_spot_colors = pdf14pct->params.num_spot_colors; ptempdevproto->color_info.num_components = ptempdevproto->devn_params.num_std_colorant_names + pdf14pct->params.num_spot_colors; if (ptempdevproto->color_info.num_components > ptempdevproto->color_info.max_components) ptempdevproto->color_info.num_components = ptempdevproto->color_info.max_components; *pdevproto = ptempdevproto; } break; case PDF14_DeviceCustom: /* * We are using the output device's process color model. The * color_info for the PDF 1.4 compositing device needs to match * the output device. */ *ptempdevproto = pdf14_clist_custom_device; ptempdevproto->color_info = dev->color_info; *pdevproto = ptempdevproto; break; default: /* Should not occur */ return_error(gs_error_rangecheck); } return 0; } static int pdf14_create_clist_device(gs_memory_t *mem, gs_imager_state * pis, gx_device ** ppdev, gx_device * target, const gs_pdf14trans_t * pdf14pct) { pdf14_clist_device * dev_proto; pdf14_clist_device * pdev, temp_dev_proto; int code; if_debug0('v', "[v]pdf14_create_clist_device\n"); code = get_pdf14_clist_device_proto(target, &dev_proto, &temp_dev_proto, pis, pdf14pct); if (code < 0) return code; code = gs_copydevice((gx_device **) &pdev, (const gx_device *) dev_proto, mem); if (code < 0) return code; check_device_separable((gx_device *)pdev); gx_device_fill_in_procs((gx_device *)pdev); gs_pdf14_device_copy_params((gx_device *)pdev, target); rc_assign(pdev->target, target, "pdf14_create_clist_device"); code = dev_proc((gx_device *) pdev, open_device) ((gx_device *) pdev); pdev->pclist_device = target; pdev->my_encode_color = pdev->procs.encode_color; pdev->my_decode_color = pdev->procs.decode_color; pdev->my_get_color_mapping_procs = pdev->procs.get_color_mapping_procs; pdev->my_get_color_comp_index = pdev->procs.get_color_comp_index; *ppdev = (gx_device *) pdev; return code; } /* * Disable the PDF 1.4 clist compositor device. Once created, the PDF 1.4 * compositor device is never removed. (We do not have a remove compositor * method.) However it is no-op'ed when the PDF 1.4 device is popped. This * routine implements that action. */ static int pdf14_disable_clist_device(gs_memory_t *mem, gs_imager_state * pis, gx_device * dev) { gx_device_forward * pdev = (gx_device_forward *)dev; gx_device * target = pdev->target; if_debug0('v', "[v]pdf14_disable_clist_device\n"); /* * To disable the action of this device, we forward all device * procedures to the target except the create_compositor and copy * the target's color_info. */ dev->color_info = target->color_info; pdf14_forward_device_procs(dev); set_dev_proc(dev, create_compositor, pdf14_clist_forward_create_compositor); return 0; } /* * Recreate the PDF 1.4 clist compositor device. Once created, the PDF 1.4 * compositor device is never removed. (We do not have a remove compositor * method.) However it is no-op'ed when the PDF 1.4 device is popped. This * routine will re-enable the compositor if the PDF 1.4 device is pushed * again. */ static int pdf14_recreate_clist_device(gs_memory_t *mem, gs_imager_state * pis, gx_device * dev, const gs_pdf14trans_t * pdf14pct) { pdf14_clist_device * pdev = (pdf14_clist_device *)dev; gx_device * target = pdev->target; pdf14_clist_device * dev_proto; pdf14_clist_device temp_dev_proto; int code; if_debug0('v', "[v]pdf14_recreate_clist_device\n"); /* * We will not use the entire prototype device but we will set the * color related info to match the prototype. */ code = get_pdf14_clist_device_proto(target, &dev_proto, &temp_dev_proto, pis, pdf14pct); if (code < 0) return code; pdev->color_info = dev_proto->color_info; pdev->procs = dev_proto->procs; gx_device_fill_in_procs(dev); check_device_separable((gx_device *)pdev); return code; } /* * Key names are normally C const strings. However we need to create temp * parameter key names. They only need to have a short life. We need to * create a parameter list with the key names. Then we will put the parameters * into the clist. That process will create a permanent copy of the key * name. At that point we can release our temp key names. */ typedef struct keyname_link_list_s { struct keyname_link_list_s * next; char * key_name; } keyname_link_list_t; /* * The GC description for the keyname link list is being included for * completeness. Since this structure is only temporary, this structure * should never be exposed to the GC. */ gs_private_st_ptrs2(st_keyname_link_list, keyname_link_list_t, "keyname_link_list", keyname_link_list_enum_ptrs, keyname_link_list_reloc_ptrs, next, key_name); /* See comments before the definition of keyname_link_list_t */ static int free_temp_keyname_list(gs_memory_t * mem, keyname_link_list_t * plist) { keyname_link_list_t * pthis_elem; while (plist != NULL) { pthis_elem = plist; plist = plist->next; gs_free_object(mem, (byte *)pthis_elem, "free_temp_keyname_list"); } return 0; } /* Put a data value into our 'string' */ #define put_data(pdata, value, count)\ for(j = 0; j < count; j++)\ *pdata++ = (byte)((value) >> (j * 8)) /* * Convert a compressed color list element into a set of device parameters. * Note: This routine recursively calls itself. As a result it can create * mulitple device parameters. The parameters are 'strings'. Actually the * data is stored in the strings as binary data. * * See comments before the definition of keyname_link_list_t */ static int get_param_compressed_color_list_elem(pdf14_clist_device * pdev, gs_param_list * plist, compressed_color_list_t * pcomp_list, char * keyname, keyname_link_list_t ** pkeyname_list) { int max_list_elem_size = 6 + NUM_ENCODE_LIST_ITEMS * sizeof(comp_bit_map_list_t); int code, i, j; byte * pdata; gs_param_string str; if (pcomp_list == NULL) /* Exit if we don not have a list. */ return 0; /* Allocate a string for temp data */ pdata = gs_alloc_bytes(pdev->memory, max_list_elem_size, "convert_compressed_color_list_elem"); str.data = (const byte *)pdata; str.persistent = false; put_data(pdata, pcomp_list->num_sub_level_ptrs, 2); put_data(pdata, pcomp_list->first_bit_map, 2); /* . */ for (i = pcomp_list->first_bit_map; i < NUM_ENCODE_LIST_ITEMS; i++) { put_data(pdata, pcomp_list->u.comp_data[i].num_comp, 2); put_data(pdata, pcomp_list->u.comp_data[i].num_non_solid_comp, 2); put_data(pdata, pcomp_list->u.comp_data[i].solid_not_100, 1); put_data(pdata, pcomp_list->u.comp_data[i].colorants, sizeof(pcomp_list->u.comp_data[i].colorants)); if (pcomp_list->u.comp_data[i].num_comp != pcomp_list->u.comp_data[i].num_non_solid_comp) { put_data(pdata, pcomp_list->u.comp_data[i].solid_colorants, sizeof(pcomp_list->u.comp_data[i].solid_colorants)); } } str.size = pdata - str.data; code = param_write_string(plist, keyname, &str); gs_free_object(pdev->memory, (byte *)str.data, "convert_compressed_color_list_elem"); /* Convert the sub levels. */ for (i = 0; i < pcomp_list->num_sub_level_ptrs; i++) { /* * We generate a keyname for the sub level elements based upon * the keyname for the current level. See comments before the * definition of keyname_link_list_t for comments about the lifetime * of the keynames. */ /* Allocate a string for the keyname */ char * keyname_buf = (char *)gs_alloc_bytes(pdev->memory, strlen(keyname) + 10, "convert_compressed_color_list_elem"); /* * Allocate a link list element so we can keep track of the memory * allocated to hold the keynames. */ keyname_link_list_t * pkeyname_list_elem = gs_alloc_struct(pdev->memory, keyname_link_list_t, &st_keyname_link_list, "convert_compressed_color_list_elem"); pkeyname_list_elem->next = *pkeyname_list; pkeyname_list_elem->key_name = keyname_buf; *pkeyname_list = pkeyname_list_elem; sprintf(keyname_buf, "%s_%d", keyname, i); get_param_compressed_color_list_elem(pdev, plist, pcomp_list->u.sub_level_ptrs[i], keyname_buf, pkeyname_list); } return 0;; } #undef put_data /* Get data value from our 'string' */ #define get_data(pdata, value, count)\ j = count - 1;\ value = pdata[j--];\ for(; j >= 0; j--)\ value = (value << 8) | pdata[j];\ pdata += count /* * Retrieve a compressed color list from a set of device parameters. * Note: This routine recursively calls itself. As a result it can process * mulitple device parameters and create the entire compressed color list. * The parameters are 'strings'. Actually the data is stored in the strings * as binary data. */ int put_param_compressed_color_list_elem(gx_device * pdev, gs_param_list * plist, compressed_color_list_t ** pret_comp_list, char * keyname, int num_comps) { int code, i, j; byte * pdata; gs_param_string str; compressed_color_list_t * pcomp_list; /* Check if the given keyname is present. */ code = param_read_string(plist, keyname, &str); switch (code) { case 0: break; /* We have the given keyname, continue. */ default: param_signal_error(plist, keyname, code); case 1: *pret_comp_list = NULL; return 0; } /* Allocate a compressed color list element. */ pdata = (byte *)str.data; pcomp_list = alloc_compressed_color_list_elem(pdev->memory, num_comps); get_data(pdata, pcomp_list->num_sub_level_ptrs, 2); get_data(pdata, pcomp_list->first_bit_map, 2); /* Read the bit maps */ for (i = pcomp_list->first_bit_map; i < NUM_ENCODE_LIST_ITEMS; i++) { get_data(pdata, pcomp_list->u.comp_data[i].num_comp, 2); get_data(pdata, pcomp_list->u.comp_data[i].num_non_solid_comp, 2); get_data(pdata, pcomp_list->u.comp_data[i].solid_not_100, 1); get_data(pdata, pcomp_list->u.comp_data[i].colorants, sizeof(pcomp_list->u.comp_data[i].colorants)); if (pcomp_list->u.comp_data[i].num_comp != pcomp_list->u.comp_data[i].num_non_solid_comp) { get_data(pdata, pcomp_list->u.comp_data[i].solid_colorants, sizeof(pcomp_list->u.comp_data[i].solid_colorants)); } } /* Get the sub levels. */ for (i = 0; i < pcomp_list->num_sub_level_ptrs; i++) { char buff[50]; compressed_color_list_t * sub_list_ptr; sprintf(buff, "%s_%d", keyname, i); put_param_compressed_color_list_elem(pdev, plist, &sub_list_ptr, buff, num_comps - 1); pcomp_list->u.sub_level_ptrs[i] = sub_list_ptr; } *pret_comp_list = pcomp_list; return 0;; } #undef get_data /* * Convert a list of spot color names into a set of device parameters. * This is done to transfer information from the PDf14 clist writer * compositing device to the PDF14 clist reader compositing device. * * See comments before the definition of keyname_link_list_t */ static int get_param_spot_color_names(pdf14_clist_device * pdev, gs_param_list * plist, keyname_link_list_t ** pkeyname_list) { int code, i; gs_param_string str; gs_separations * separations = &pdev->devn_params.separations; int num_spot_colors = separations->num_separations; if (num_spot_colors == 0) return 0; code = param_write_int(plist, PDF14NumSpotColorsParamName, &num_spot_colors); for (i = 0; i < num_spot_colors; i++) { /* * We generate a keyname for the spot color based upon the * spot color number. See comments before the definition of * keyname_link_list_t for comments about the lifetime of the keynames. */ /* Allocate a string for the keyname */ char * keyname_buf = (char *)gs_alloc_bytes(pdev->memory, strlen("PDF14SpotName_") + 10, "get_param_spot_color_names"); /* * Allocate a link list element so we can keep track of the memory * allocated to hold the keynames. */ keyname_link_list_t * pkeyname_list_elem = gs_alloc_struct(pdev->memory, keyname_link_list_t, &st_keyname_link_list, "get_param_spot_color_names"); pkeyname_list_elem->next = *pkeyname_list; pkeyname_list_elem->key_name = keyname_buf; *pkeyname_list = pkeyname_list_elem; sprintf(keyname_buf, "PDF14SpotName_%d", i); str.size = separations->names[i].size; str.data = separations->names[i].data; str.persistent = false; code = param_write_string(plist, keyname_buf, &str); } return 0;; } /* * Retrieve a list of spot color names for the PDF14 device. */ int put_param_pdf14_spot_names(gx_device * pdev, gs_separations * pseparations, gs_param_list * plist) { int code, num_spot_colors, i; gs_param_string str; /* Check if the given keyname is present. */ code = param_read_int(plist, PDF14NumSpotColorsParamName, &num_spot_colors); switch (code) { default: param_signal_error(plist, PDF14NumSpotColorsParamName, code); break; case 1: return 0; case 0: if (num_spot_colors < 1 || num_spot_colors > GX_DEVICE_COLOR_MAX_COMPONENTS) return_error(gs_error_rangecheck); for (i = 0; i < num_spot_colors; i++) { char buff[20]; byte * sep_name; sprintf(buff, "PDF14SpotName_%d", i); code = param_read_string(plist, buff, &str); switch (code) { default: param_signal_error(plist, buff, code); break; case 0: sep_name = gs_alloc_bytes(pdev->memory, str.size, "put_param_pdf14_spot_names"); memcpy(sep_name, str.data, str.size); pseparations->names[i].size = str.size; pseparations->names[i].data = sep_name; } } pseparations->num_separations = num_spot_colors; break; } return 0;; } static int pdf14_clist_get_param_compressed_color_list(pdf14_device * p14dev) { gx_device_clist_writer * cldev = (gx_device_clist_writer *)p14dev->pclist_device; gs_c_param_list param_list; keyname_link_list_t * pkeyname_list_head = NULL; int code; /* * If a put_params call fails, the device will be left in a closed * state, but higher-level code won't notice this fact. We flag this by * setting permanent_error, which prevents writing to the command list. */ if (cldev->permanent_error) return cldev->permanent_error; gs_c_param_list_write(¶m_list, p14dev->memory); code = get_param_compressed_color_list_elem(p14dev, (gs_param_list *)¶m_list, p14dev->devn_params.compressed_color_list, (char *)PDF14CompressedColorListParamName, &pkeyname_list_head); get_param_spot_color_names(p14dev, (gs_param_list *)¶m_list, &pkeyname_list_head); if (code >= 0) { gx_device * tdev = p14dev->target; gs_c_param_list_read(¶m_list); /* put_param_compressed_color_list_elem(p14dev, (gs_param_list *)¶m_list, &pret_comp_list, "PDF14CompressedColorList", TOP_ENCODED_LEVEL); put_param_pdf14_spot_names(p14dev, (gs_param_list *)¶m_list); */ #if 1 code = dev_proc(tdev, put_params)(tdev, (gs_param_list *)¶m_list); #else /* * This call will put the compressed color list info into the * clist. However there are two problems. The info goes into * the list at the end of the list. */ code = cmd_put_params(cldev, (gs_param_list *)¶m_list ); #endif } gs_c_param_list_release(¶m_list); free_temp_keyname_list(p14dev->memory, pkeyname_list_head); return code; } /* * This procedure will have information from the PDF 1.4 clist writing * clist compositior device. This is information output the compressed * color list info which is needed for the support of spot colors in * PDF 1.4 compositing. This info needs to be passed to the PDF 1.4 * clist reading compositor. However this device is not created until * the clist is read. To get this info to that device, we have to * temporarily store that info in the output device. This routine saves * that info in the output device. */ int pdf14_put_devn_params(gx_device * pdev, gs_devn_params * pdevn_params, gs_param_list * plist) { int code = put_param_compressed_color_list_elem(pdev, plist, &pdevn_params->pdf14_compressed_color_list, (char *)PDF14CompressedColorListParamName, TOP_ENCODED_LEVEL); if (code >= 0) code = put_param_pdf14_spot_names(pdev, &pdevn_params->pdf14_separations, plist); return code; } /* * When we are banding, we have two PDF 1.4 compositor devices. One for * when we are creating the clist. The second is for imaging the data from * the clist. This routine is part of the clist writing PDF 1.4 device. * This routine is only called once the PDF 1.4 clist write compositor already * exists. */ static int pdf14_clist_create_compositor(gx_device * dev, gx_device ** pcdev, const gs_composite_t * pct, gs_imager_state * pis, gs_memory_t * mem) { pdf14_clist_device * pdev = (pdf14_clist_device *)dev; int code; bool sep_target; /* We only handle a few PDF 1.4 transparency operations 4 */ if (gs_is_pdf14trans_compositor(pct)) { const gs_pdf14trans_t * pdf14pct = (const gs_pdf14trans_t *) pct; switch (pdf14pct->params.pdf14_op) { case PDF14_PUSH_DEVICE: /* Re-activate the PDF 1.4 compositor */ pdev->saved_target_color_info = pdev->target->color_info; pdev->target->color_info = pdev->color_info; pdev->saved_target_encode_color = pdev->target->procs.encode_color; pdev->saved_target_decode_color = pdev->target->procs.decode_color; pdev->target->procs.encode_color = pdev->procs.encode_color = pdev->my_encode_color; pdev->target->procs.decode_color = pdev->procs.decode_color = pdev->my_decode_color; pdev->saved_target_get_color_mapping_procs = pdev->target->procs.get_color_mapping_procs; pdev->saved_target_get_color_comp_index = pdev->target->procs.get_color_comp_index; pdev->target->procs.get_color_mapping_procs = pdev->procs.get_color_mapping_procs = pdev->my_get_color_mapping_procs; pdev->target->procs.get_color_comp_index = pdev->procs.get_color_comp_index = pdev->my_get_color_comp_index; pdev->save_get_cmap_procs = pis->get_cmap_procs; pis->get_cmap_procs = pdf14_get_cmap_procs; gx_set_cmap_procs(pis, dev); code = pdf14_recreate_clist_device(mem, pis, dev, pdf14pct); pdev->blend_mode = pdev->text_knockout = 0; pdev->opacity = pdev->shape = 0.0; if (code < 0) return code; /* * This routine is part of the PDF 1.4 clist write device. * Change the compositor procs to not create another since we * do not need to create a chain of identical devices. */ { gs_composite_t pctemp = *pct; pctemp.type = &gs_composite_pdf14trans_no_clist_writer_type; code = dev_proc(pdev->target, create_compositor) (pdev->target, pcdev, &pctemp, pis, mem); *pcdev = dev; return code; } case PDF14_POP_DEVICE: /* Restore the color_info for the clist device */ pdev->target->color_info = pdev->saved_target_color_info; pdev->target->procs.encode_color = pdev->saved_target_encode_color; pdev->target->procs.decode_color = pdev->saved_target_decode_color; pdev->target->procs.get_color_mapping_procs = pdev->saved_target_get_color_mapping_procs; pdev->target->procs.get_color_comp_index = pdev->saved_target_get_color_comp_index; pis->get_cmap_procs = pdev->save_get_cmap_procs; gx_set_cmap_procs(pis, pdev->target); /* * For spot colors we use a 'compressed encoding' for * gx_color_index values. Send the related data struct * to the clist. */ pdf14_clist_get_param_compressed_color_list(pdev); /* Disable the PDF 1.4 compositor */ pdf14_disable_clist_device(mem, pis, dev); /* * Make sure that the transfer funtions, etc. are current. */ code = cmd_put_color_mapping( (gx_device_clist_writer *)(pdev->target), pis); if (code < 0) return code; break; case PDF14_BEGIN_TRANS_GROUP: /* * Keep track of any changes made in the blending parameters. */ pdev->text_knockout = pdf14pct->params.Knockout; pdev->blend_mode = pdf14pct->params.blend_mode; pdev->opacity = pdf14pct->params.opacity.alpha; pdev->shape = pdf14pct->params.shape.alpha; if (pdf14pct->params.Background_components != 0 && pdf14pct->params.Background_components != pdev->color_info.num_components) return_error(gs_error_rangecheck); /* We need to update the clist writer device procs based upon the the group color space. For simplicity, the list item is created even if the color space did not change */ /* First store the current ones */ pdf14_push_parent_color(dev, pis); /* Now update the device procs. Not if we have a sep target though */ sep_target = (strcmp(pdev->dname, "pdf14clistcustom") == 0) || (strcmp(pdev->dname, "pdf14clistcmykspot") == 0); if (!sep_target) code = pdf14_update_device_color_procs_push_c(dev, pdf14pct->params.group_color,pis); /* Note that our initial device buffer may have had a different color space than the first transparency group. In such a case, we really should force this first group to be isolated, anytime that the parent color space is different than its child group, it should be isolated, per the PDF spec */ /* MJV */ /* if (code == 1){ isolated = true; if_debug0('v', "[v]Transparency group color space change\n"); } else { isolated = ptgp->Isolated; } */ break; case PDF14_BEGIN_TRANS_MASK: /* We need to update the clist writer device procs based upon the the group color space. For simplicity, the list item is created even if the color space did not change */ /* First store the current ones */ pdf14_push_parent_color(dev, pis); /* Now update the device procs */ code = pdf14_update_device_color_procs_push_c(dev, pdf14pct->params.group_color,pis); /* Also, if the BC is a value that may end up as something other than transparent. We must use the parent colors bounding box in determining the range of bands in which this mask can affect. So, if needed change the masks bounding box at this time */ break; /* When we get a trans group pop, we need to update the color mapping procs */ case PDF14_END_TRANS_GROUP: /* We need to update the clist writer device procs based upon the the group color space. */ /* First restore our procs */ code = pdf14_update_device_color_procs_pop_c(dev,pis); /* Now pop the old one */ pdf14_pop_parent_color(dev, pis); break; case PDF14_END_TRANS_MASK: /* We need to update the clist writer device procs based upon the the group color space. */ /* First restore our procs */ code = pdf14_update_device_color_procs_pop_c(dev,pis); /* Now pop the old one */ pdf14_pop_parent_color(dev, pis); break; case PDF14_PUSH_TRANS_STATE: break; case PDF14_POP_TRANS_STATE: break; default: break; /* Pass remaining ops to target */ } } code = dev_proc(pdev->target, create_compositor) (pdev->target, pcdev, pct, pis, mem); if (*pcdev != pdev->target) rc_assign(pdev->target, *pcdev, "pdf14_clist_create_compositor"); *pcdev = dev; return code; } /* * The PDF 1.4 clist compositor is never removed. (We do not have a 'remove * compositor' method. However the compositor is disabled when we are not * doing a page which uses PDF 1.4 transparency. This routine is only active * when the PDF 1.4 compositor is 'disabled'. It checks for reenabling the * PDF 1.4 compositor. Otherwise it simply passes create compositor requests * to the targer. */ static int pdf14_clist_forward_create_compositor(gx_device * dev, gx_device * * pcdev, const gs_composite_t * pct, gs_imager_state * pis, gs_memory_t * mem) { pdf14_device *pdev = (pdf14_device *)dev; gx_device * tdev = pdev->target; gx_device * ndev; int code = 0; *pcdev = dev; if (gs_is_pdf14trans_compositor(pct)) { const gs_pdf14trans_t * pdf14pct = (const gs_pdf14trans_t *) pct; if (pdf14pct->params.pdf14_op == PDF14_PUSH_DEVICE) return pdf14_clist_create_compositor(dev, &ndev, pct, pis, mem); return 0; } code = dev_proc(tdev, create_compositor)(tdev, &ndev, pct, pis, mem); if (code < 0) return code; pdev->target = ndev; return 0; } /* * If any of the PDF 1.4 transparency blending parameters have changed, we * need to send them to the PDF 1.4 compositor on the output side of the clist. */ static int pdf14_clist_update_params(pdf14_clist_device * pdev, const gs_imager_state * pis) { gs_pdf14trans_params_t params = { 0 }; gx_device * pcdev; int changed = 0; int code = 0; params.pdf14_op = PDF14_SET_BLEND_PARAMS; if (pis->blend_mode != pdev->blend_mode) { changed |= PDF14_SET_BLEND_MODE; params.blend_mode = pdev->blend_mode = pis->blend_mode; } if (pis->text_knockout != pdev->text_knockout) { changed |= PDF14_SET_TEXT_KNOCKOUT; params.text_knockout = pdev->text_knockout = pis->text_knockout; } if (pis->shape.alpha != pdev->shape) { changed |= PDF14_SET_SHAPE_ALPHA; params.shape.alpha = pdev->shape = pis->shape.alpha; } if (pis->opacity.alpha != pdev->opacity) { changed |= PDF14_SET_OPACITY_ALPHA; params.opacity.alpha = pdev->opacity = pis->opacity.alpha; } if (pis->overprint != pdev->overprint) { changed |= PDF14_SET_OVERPRINT; params.overprint = pdev->overprint = pis->overprint; } if (pis->overprint_mode != pdev->overprint_mode) { changed |= PDF14_SET_OVERPRINT_MODE; params.overprint_mode = pdev->overprint_mode = pis->overprint_mode; } /* * Put parameters into a compositor parameter and then call the * create_compositor. This will pass the data through the clist * to the PDF 1.4 transparency output device. Note: This action * never creates a new PDF 1.4 compositor and it does not change * the imager state. */ if (changed != 0) { params.changed = changed; code = send_pdf14trans((gs_imager_state *)pis, (gx_device *)pdev, &pcdev, ¶ms, pis->memory); } return code; } /* * fill_path routine for the PDF 1.4 transaprency compositor device for * writing the clist. */ static int pdf14_clist_fill_path(gx_device *dev, const gs_imager_state *pis, gx_path *ppath, const gx_fill_params *params, const gx_drawing_color *pdcolor, const gx_clip_path *pcpath) { pdf14_clist_device * pdev = (pdf14_clist_device *)dev; gs_imager_state new_is = *pis; int code; gs_pattern2_instance_t *pinst = NULL; /* * Ensure that that the PDF 1.4 reading compositor will have the current * blending parameters. This is needed since the fill_rectangle routines * do not have access to the imager state. Thus we have to pass any * changes explictly. */ code = pdf14_clist_update_params(pdev, pis); if (code < 0) return code; /* If we are doing a shading fill and we are in a tranparency group of a different color space, then we do not want to do the shading in the device color space. It must occur in the source space. To handle it in the device space would require knowing all the nested transparency group color spaces as well as the transparency. Some of the shading code ignores this, so we have to pass on the clist_writer device to enable proper mapping to the transparency group color space. */ if (pdcolor != NULL && gx_dc_is_pattern2_color(pdcolor) && pdev->trans_group_parent_cmap_procs != NULL) { pinst = (gs_pattern2_instance_t *)pdcolor->ccolor.pattern; pinst->saved->has_transparency = true; /* The transparency color space operations are driven by the pdf14 clist writer device. */ pinst->saved->trans_device = dev; } /* * The blend operations are not idempotent. Force non-idempotent * filling and stroking operations. */ new_is.log_op |= lop_pdf14; new_is.trans_device = dev; new_is.has_transparency = true; code = gx_forward_fill_path(dev, &new_is, ppath, params, pdcolor, pcpath); new_is.trans_device = NULL; new_is.has_transparency = false; if (pinst != NULL){ pinst->saved->trans_device = NULL; } return code; } /* * stroke_path routine for the PDF 1.4 transaprency compositor device for * writing the clist. */ static int pdf14_clist_stroke_path(gx_device *dev, const gs_imager_state *pis, gx_path *ppath, const gx_stroke_params *params, const gx_drawing_color *pdcolor, const gx_clip_path *pcpath) { pdf14_clist_device * pdev = (pdf14_clist_device *)dev; gs_imager_state new_is = *pis; int code; /* * Ensure that that the PDF 1.4 reading compositor will have the current * blending parameters. This is needed since the fill_rectangle routines * do not have access to the imager state. Thus we have to pass any * changes explictly. */ code = pdf14_clist_update_params(pdev, pis); if (code < 0) return code; /* * The blend operations are not idempotent. Force non-idempotent * filling and stroking operations. */ new_is.log_op |= lop_pdf14; return gx_forward_stroke_path(dev, &new_is, ppath, params, pdcolor, pcpath); } /* * text_begin routine for the PDF 1.4 transaprency compositor device for * writing the clist. */ static int pdf14_clist_text_begin(gx_device * dev, gs_imager_state * pis, const gs_text_params_t * text, gs_font * font, gx_path * path, const gx_device_color * pdcolor, const gx_clip_path * pcpath, gs_memory_t * memory, gs_text_enum_t ** ppenum) { pdf14_clist_device * pdev = (pdf14_clist_device *)dev; gs_text_enum_t *penum; int code; /* * Ensure that that the PDF 1.4 reading compositor will have the current * blending parameters. This is needed since the fill_rectangle routines * do not have access to the imager state. Thus we have to pass any * changes explictly. */ code = pdf14_clist_update_params(pdev, pis); if (code < 0) return code; /* Pass text_begin to the target */ code = gx_forward_text_begin(dev, pis, text, font, path, pdcolor, pcpath, memory, &penum); if (code < 0) return code; *ppenum = (gs_text_enum_t *)penum; return code; } static int pdf14_clist_begin_image(gx_device * dev, const gs_imager_state * pis, const gs_image_t * pim, gs_image_format_t format, const gs_int_rect * prect, const gx_drawing_color * pdcolor, const gx_clip_path * pcpath, gs_memory_t * memory, gx_image_enum_common_t ** pinfo) { pdf14_clist_device * pdev = (pdf14_clist_device *)dev; int code; /* * Ensure that that the PDF 1.4 reading compositor will have the current * blending parameters. This is needed since the fill_rectangle routines * do not have access to the imager state. Thus we have to pass any * changes explictly. */ code = pdf14_clist_update_params(pdev, pis); if (code < 0) return code; /* Pass image to the target */ code = gx_forward_begin_image(dev, pis, pim, format, prect, pdcolor, pcpath, memory, pinfo); if (code < 0) return gx_default_begin_image(dev, pis, pim, format, prect, pdcolor, pcpath, memory, pinfo); else return code; } static int pdf14_clist_begin_typed_image(gx_device * dev, const gs_imager_state * pis, const gs_matrix *pmat, const gs_image_common_t *pic, const gs_int_rect * prect, const gx_drawing_color * pdcolor, const gx_clip_path * pcpath, gs_memory_t * mem, gx_image_enum_common_t ** pinfo) { pdf14_clist_device * pdev = (pdf14_clist_device *)dev; int code; gs_imager_state * pis_noconst = (gs_imager_state *)pis; /* Break 'const'. */ /* * Ensure that that the PDF 1.4 reading compositor will have the current * blending parameters. This is needed since the fill_rectangle routines * do not have access to the imager state. Thus we have to pass any * changes explictly. */ code = pdf14_clist_update_params(pdev, pis); if (code < 0) return code; /* Pass image to the target */ /* Do a quick change to the imager state so that if we can return with -1 in case the clist writer cannot handle this image itself. In such a case, we want to make sure we dont use the target device. I don't necc. like doing it this way. Probably need to go back and do something a bit more elegant. */ pis_noconst->has_transparency = true; code = gx_forward_begin_typed_image(dev, pis, pmat, pic, prect, pdcolor, pcpath, mem, pinfo); if (code < 0){ code = gx_default_begin_typed_image(dev, pis, pmat, pic, prect, pdcolor, pcpath, mem, pinfo); pis_noconst->has_transparency = false; return code; } else { pis_noconst->has_transparency = false; return code; } } /* * When we push a PDF 1.4 transparency compositor onto the clist, we also need * to create a compositing device for clist writing. The primary purpose of * this device is to provide support for the process color model in which * the PDF 1.4 transparency is done. (This may differ from the process color * model of the output device.) The actual work of compositing the image is * done on the output (reader) side of the clist. */ static int c_pdf14trans_clist_write_update(const gs_composite_t * pcte, gx_device * dev, gx_device ** pcdev, gs_imager_state * pis, gs_memory_t * mem) { gx_device_clist_writer * const cdev = &((gx_device_clist *)dev)->writer; const gs_pdf14trans_t * pdf14pct = (const gs_pdf14trans_t *) pcte; pdf14_clist_device * p14dev; int code = 0; p14dev = (pdf14_clist_device *)(*pcdev); /* We only handle the push/pop operations */ switch (pdf14pct->params.pdf14_op) { case PDF14_PUSH_DEVICE: code = pdf14_create_clist_device(mem, pis, pcdev, dev, pdf14pct); /* * Set the color_info of the clist device to match the compositing * device. We will restore it when the compositor is popped. * See pdf14_clist_create_compositor for the restore. Do the * same with the imager state's get_cmap_procs. We do not want * the imager state to use transfer functions on our color values. * The transfer functions will be applied at the end after we * have done our PDF 1.4 blend operations. */ /* * Also if the bit depth is not 8 per channel we need to adjust * as all the pdf14 compositing code is for 8 bits per channel. * The clist writer device uses this information to make sure * the proper bit depth is written. If we are using compressed * color enconding, the color is written in a gx_color_index * even for more than 8 components. */ p14dev = (pdf14_clist_device *)(*pcdev); if (cdev->clist_color_info.num_components * 8 != cdev->clist_color_info.depth && p14dev->my_encode_color != pdf14_compressed_encode_color) cdev->clist_color_info.depth = cdev->clist_color_info.num_components * 8; p14dev->saved_target_color_info = dev->color_info; dev->color_info = (*pcdev)->color_info; p14dev->saved_target_encode_color = dev->procs.encode_color; p14dev->saved_target_decode_color = dev->procs.decode_color; dev->procs.encode_color = p14dev->procs.encode_color = p14dev->my_encode_color; dev->procs.decode_color = p14dev->procs.decode_color = p14dev->my_decode_color; p14dev->saved_target_get_color_mapping_procs = dev->procs.get_color_mapping_procs; p14dev->saved_target_get_color_comp_index = dev->procs.get_color_comp_index; dev->procs.get_color_mapping_procs = p14dev->procs.get_color_mapping_procs = p14dev->my_get_color_mapping_procs; dev->procs.get_color_comp_index = p14dev->procs.get_color_comp_index = p14dev->my_get_color_comp_index; p14dev->save_get_cmap_procs = pis->get_cmap_procs; pis->get_cmap_procs = pdf14_get_cmap_procs; gx_set_cmap_procs(pis, dev); return code; case PDF14_POP_DEVICE: # if 0 /* Disabled because pdf14_clist_create_compositor does so. */ /* * Ensure that the tranfer functions, etc. are current before we * dump our transparency image to the output device. */ if (pis->dev_ht) code = cmd_put_halftone((gx_device_clist_writer *) (((pdf14_clist_device *)dev)->target), pis->dev_ht); # else code = 0; # endif code = clist_writer_check_empty_cropping_stack(cdev); break; case PDF14_BEGIN_TRANS_GROUP: { /* HACK: store mask_id into our params for subsequent calls of c_pdf14trans_write. To do this we must break const. */ gs_pdf14trans_t * pdf14pct_noconst; pdf14pct_noconst = (gs_pdf14trans_t *) pcte; /* What ever the current mask ID is, that is the softmask group through which this transparency group must be rendered. Store it now. */ pdf14pct_noconst->params.mask_id = cdev->mask_id; if_debug1('v', "[v]c_pdf14trans_clist_write_update group mask_id=%d \n", cdev->mask_id); } break; case PDF14_END_TRANS_GROUP: code = 0; /* A place for breakpoint. */ break; case PDF14_BEGIN_TRANS_MASK: /* A new mask has been started */ cdev->mask_id = ++cdev->mask_id_count; /* replacing is set everytime that we have a zpushtransparencymaskgroup */ { /* HACK: store mask_id into our params for subsequent calls of c_pdf14trans_write. To do this we must break const. */ gs_pdf14trans_t * pdf14pct_noconst; pdf14pct_noconst = (gs_pdf14trans_t *) pcte; pdf14pct_noconst->params.mask_id = cdev->mask_id; if_debug1('v', "[v]c_pdf14trans_clist_write_update mask mask_id=%d \n", cdev->mask_id); } break; case PDF14_END_TRANS_MASK: code = 0; /* A place for breakpoint. */ break; case PDF14_PUSH_TRANS_STATE: code = 0; /* A place for breakpoint. */ break; case PDF14_POP_TRANS_STATE: code = 0; /* A place for breakpoint. */ break; default: break; /* do nothing for remaining ops */ } *pcdev = dev; if (code < 0) return code; /* See c_pdf14trans_write, c_pdf14trans_adjust_ctm, and apply_create_compositor. */ code = gs_imager_setmatrix(&cdev->imager_state, &pdf14pct->params.ctm); /* Wrote an extra ctm. */ cmd_clear_known(cdev, ctm_known); return code; } /* * When we push a PDF 1.4 transparency compositor, we need to make the clist * device color_info data match the compositing device. We need to do this * since the PDF 1.4 transparency compositing device may use a different * process color model than the output device. We do not need to modify the * color related device procs since the compositing device has its own. We * restore the color_info data when the transparency device is popped. */ static int c_pdf14trans_clist_read_update(gs_composite_t * pcte, gx_device * cdev, gx_device * tdev, gs_imager_state * pis, gs_memory_t * mem) { pdf14_device * p14dev = (pdf14_device *)tdev; gs_pdf14trans_t * pdf14pct = (gs_pdf14trans_t *) pcte; gs_devn_params * pclist_devn_params; /* * We only handle the push/pop operations. Save and restore the color_info * field for the clist device. (This is needed since the process color * model of the clist device needs to match the PDF 1.4 compositing * device. */ switch (pdf14pct->params.pdf14_op) { case PDF14_PUSH_DEVICE: # if 0 /* Disabled because *p14dev has no forwarding methods during the clist playback. This code is not executed while clist writing. */ p14dev->saved_target_color_info = cdev->color_info; cdev->color_info = p14dev->color_info; */ # endif /* * If we are blending using spot colors (i.e. the output device * supports spot colors) then we need to transfer compressed * color info from the clist PDF 1.4 compositing reader device * to the clist writer PDF 1.4 compositing device. * This info was transfered from that device to the output * device as a set of device parameters. However the clist * reader PDF 1.4 compositing device did not exist when the * device parameters were read from the clist. So that info * was buffered into the output device. */ pclist_devn_params = dev_proc(cdev, ret_devn_params)(cdev); if (pclist_devn_params != NULL) { int num_comp = p14dev->color_info.num_components; /* * The number of components for the PDF14 device is the sum * of the process components and the number of spot colors * for the page. */ p14dev->devn_params.page_spot_colors = pclist_devn_params->page_spot_colors; p14dev->color_info.num_components = p14dev->devn_params.num_std_colorant_names + p14dev->devn_params.page_spot_colors; /* Transfer the data for the compressed color encoding. */ /* free_compressed_color_list(p14dev->memory, p14dev->devn_params.compressed_color_list); */ p14dev->devn_params.compressed_color_list = pclist_devn_params->pdf14_compressed_color_list; /* free_separation_names(p14dev->memory, &p14dev->devn_params.separations); */ p14dev->devn_params.separations = pclist_devn_params->pdf14_separations; if ( num_comp != p14dev->color_info.num_components) { dev_proc(tdev, open_device) (tdev); dev_proc(tdev, open_device) (tdev); } } break; case PDF14_POP_DEVICE: # if 0 /* Disabled because *p14dev has no forwarding methods during the clist playback. This code is not executed while clist writing. */ cdev->color_info = p14dev->saved_target_color_info; # endif break; default: break; /* do nothing for remaining ops */ } return 0; } /* * Get cropping for the compositor command. */ static int c_pdf14trans_get_cropping(const gs_composite_t *pcte, int *ry, int *rheight, int cropping_min, int cropping_max) { gs_pdf14trans_t * pdf14pct = (gs_pdf14trans_t *) pcte; switch (pdf14pct->params.pdf14_op) { case PDF14_PUSH_DEVICE: return 0; /* Applies to all bands. */ case PDF14_POP_DEVICE: return 0; /* Applies to all bands. */ case PDF14_BEGIN_TRANS_GROUP: { gs_int_rect rect; int code; code = pdf14_compute_group_device_int_rect(&pdf14pct->params.ctm, &pdf14pct->params.bbox, &rect); /* We have to crop this by the parent object. */ *ry = max(rect.p.y, cropping_min); *rheight = min(rect.q.y, cropping_max) - *ry; return 1; /* Push cropping. */ } case PDF14_BEGIN_TRANS_MASK: { gs_int_rect rect; int code; code = pdf14_compute_group_device_int_rect(&pdf14pct->params.ctm, &pdf14pct->params.bbox, &rect); /* We have to crop this by the parent object and worry about the BC outside the range */ if ( pdf14pct->params.GrayBackground == 1.0 ) { /* In this case there will not be a background effect to worry about. The mask will not have any effect outside the bounding box. This is NOT the default or common case. */ *ry = max(rect.p.y, cropping_min); *rheight = min(rect.q.y, cropping_max) - *ry; return 1; /* Push cropping. */ } else { /* We need to make the soft mask range as large as the parent due to the fact that the background color can have an impact OUTSIDE the bounding box of the soft mask */ *ry = cropping_min; *rheight = cropping_max - cropping_min; return 1; /* Push cropping. */ } } case PDF14_END_TRANS_GROUP: return 2; /* Pop cropping. */ case PDF14_END_TRANS_MASK: return 2; /* Pop the cropping */ case PDF14_PUSH_TRANS_STATE: return 3; case PDF14_POP_TRANS_STATE: return 3; case PDF14_SET_BLEND_PARAMS: return 3; } return 0; } /* * This routine will check to see if the color component name matches those * that are available amoung the current device's color components. If the * color name is known to the output device then we add it to the list of * colorants for the PDF 1.4 transparency compositor. * * Notes: There are currently three different versions of The PDF 1.4 * transparency compositor device. The choice of which one is being used * depends upon the process color model of the output device. This procedure * is only used if the output (target) device uses a CMYK plus spot color * process color model. * * Parameters: * dev - pointer to device data structure. * pname - pointer to name (zero termination not required) * nlength - length of the name * * This routine returns a positive value (0 to n) which is the device colorant * number if the name is found. It returns GX_DEVICE_COLOR_MAX_COMPONENTS if * the colorant is not being used due to a SeparationOrder device parameter. * It returns a negative value if not found. */ static int pdf14_cmykspot_get_color_comp_index(gx_device * dev, const char * pname, int name_size, int component_type) { pdf14_device * pdev = (pdf14_device *) dev; gx_device * tdev = pdev->target; gs_devn_params * pdevn_params = &pdev->devn_params; gs_separations * pseparations = &pdevn_params->separations; int comp_index; dev_proc_get_color_comp_index(*target_get_color_comp_index) = dev_proc(tdev, get_color_comp_index); /* The pdf14_clist_create_compositor may have set the color procs. We need the real target procs */ if (target_get_color_comp_index == pdf14_cmykspot_get_color_comp_index) target_get_color_comp_index = ((pdf14_clist_device *)pdev)->saved_target_get_color_comp_index; /* * If this is not a separation name then simply forward it to the target * device. */ if (component_type == NO_COMP_NAME_TYPE) return (*target_get_color_comp_index)(tdev, pname, name_size, component_type); /* * Check if the component is in either the process color model list * or in the SeparationNames list. */ comp_index = check_pcm_and_separation_names(dev, pdevn_params, pname, name_size, component_type); /* * Return the colorant number if we know this name. */ if (comp_index >= 0) return comp_index; /* * If we do not know this color, check if the output (target) device does. */ comp_index = (*target_get_color_comp_index)(tdev, pname, name_size, component_type); /* * Ignore color if unknown to the output device or if color is not being * imaged due to the SeparationOrder device parameter. */ if (comp_index < 0 || comp_index == GX_DEVICE_COLOR_MAX_COMPONENTS) return comp_index; /* * This is a new colorant. Add it to our list of colorants. */ if (pseparations->num_separations < GX_DEVICE_COLOR_MAX_COMPONENTS - 1) { int sep_num = pseparations->num_separations++; int color_component_number; byte * sep_name; sep_name = gs_alloc_bytes(dev->memory, name_size, "pdf14_cmykspot_get_color_comp_index"); memcpy(sep_name, pname, name_size); pseparations->names[sep_num].size = name_size; pseparations->names[sep_num].data = sep_name; color_component_number = sep_num + pdevn_params->num_std_colorant_names; if (color_component_number >= dev->color_info.num_components) color_component_number = GX_DEVICE_COLOR_MAX_COMPONENTS; else pdevn_params->separation_order_map[color_component_number] = color_component_number; return color_component_number; } return GX_DEVICE_COLOR_MAX_COMPONENTS; }