/* Copyright (C) 2001-2006 Artifex Software, Inc.
   All Rights Reserved.
  
   This software is provided AS-IS with no warranty, either express or
   implied.

   This software is distributed under license and may not be copied, modified
   or distributed except as expressly authorized under the terms of that
   license.  Refer to licensing information at http://www.artifex.com/
   or contact Artifex Software, Inc.,  7 Mt. Lassen Drive - Suite A-134,
   San Rafael, CA  94903, U.S.A., +1(415)492-9861, for further information.
*/

/* $Id: gxclip2.c 10200 2009-10-21 03:50:46Z mvrhel $ */
/* Mask clipping for patterns */
#include "memory_.h"
#include "gx.h"
#include "gserrors.h"
#include "gsstruct.h"
#include "gxdevice.h"
#include "gxdevmem.h"
#include "gxclip2.h"

private_st_device_tile_clip();

/* Device procedures */
static dev_proc_fill_rectangle(tile_clip_fill_rectangle);
static dev_proc_copy_mono(tile_clip_copy_mono);
static dev_proc_copy_color(tile_clip_copy_color);
static dev_proc_copy_alpha(tile_clip_copy_alpha);
static dev_proc_strip_copy_rop(tile_clip_strip_copy_rop);

/* The device descriptor. */
static const gx_device_tile_clip gs_tile_clip_device =
{std_device_std_body_open(gx_device_tile_clip, 0, "tile clipper",
			  0, 0, 1, 1),
 {gx_default_open_device,
  gx_forward_get_initial_matrix,
  gx_default_sync_output,
  gx_default_output_page,
  gx_default_close_device,
  gx_forward_map_rgb_color,
  gx_forward_map_color_rgb,
  tile_clip_fill_rectangle,
  gx_default_tile_rectangle,
  tile_clip_copy_mono,
  tile_clip_copy_color,
  gx_default_draw_line,
  gx_forward_get_bits,
  gx_forward_get_params,
  gx_forward_put_params,
  gx_forward_map_cmyk_color,
  gx_forward_get_xfont_procs,
  gx_forward_get_xfont_device,
  gx_forward_map_rgb_alpha_color,
  gx_forward_get_page_device,
  gx_forward_get_alpha_bits,
  tile_clip_copy_alpha,
  gx_forward_get_band,
  gx_default_copy_rop,
  gx_default_fill_path,
  gx_default_stroke_path,
  gx_default_fill_mask,
  gx_default_fill_trapezoid,
  gx_default_fill_parallelogram,
  gx_default_fill_triangle,
  gx_default_draw_thin_line,
  gx_default_begin_image,
  gx_default_image_data,
  gx_default_end_image,
  gx_default_strip_tile_rectangle,
  tile_clip_strip_copy_rop,
  gx_forward_get_clipping_box,
  gx_default_begin_typed_image,
  gx_forward_get_bits_rectangle,
  gx_forward_map_color_rgb_alpha,
  gx_no_create_compositor,
  gx_forward_get_hardware_params,
  gx_default_text_begin,
  gx_default_finish_copydevice,
  NULL,			/* begin_transparency_group */
  NULL,			/* end_transparency_group */
  NULL,			/* begin_transparency_mask */
  NULL,			/* end_transparency_mask */
  NULL,			/* discard_transparency_layer */
  gx_forward_get_color_mapping_procs,
  gx_forward_get_color_comp_index,
  gx_forward_encode_color,
  gx_forward_decode_color,
  gx_forward_pattern_manage,
  gx_forward_fill_rectangle_hl_color,
  gx_forward_include_color_space,
  gx_forward_fill_linear_color_scanline,
  gx_forward_fill_linear_color_trapezoid,
  gx_forward_fill_linear_color_triangle,
  gx_forward_update_spot_equivalent_colors,
  gx_forward_ret_devn_params,
  gx_forward_fillpage,
  NULL,                      /* push_transparency_state */
  NULL                       /* pop_transparency_state */
 }
};

/* Initialize a tile clipping device from a mask. */
int
tile_clip_initialize(gx_device_tile_clip * cdev, const gx_strip_bitmap * tiles,
		     gx_device * tdev, int px, int py, gs_memory_t *mem)
{
    int code =
    gx_mask_clip_initialize(cdev, &gs_tile_clip_device,
			    (const gx_bitmap *)tiles,
			    tdev, 0, 0, mem);	/* phase will be reset */

    if (code >= 0) {
	cdev->tiles = *tiles;
	tile_clip_set_phase(cdev, px, py);
    }
    return code;
}

/* Set the phase of the tile. */
void
tile_clip_set_phase(gx_device_tile_clip * cdev, int px, int py)
{
    cdev->phase.x = px;
    cdev->phase.y = py;
}

/* Fill a rectangle by tiling with the mask. */
static int
tile_clip_fill_rectangle(gx_device * dev, int x, int y, int w, int h,
			 gx_color_index color)
{
    gx_device_tile_clip *cdev = (gx_device_tile_clip *) dev;
    gx_device *tdev = cdev->target;

    return (*dev_proc(tdev, strip_tile_rectangle)) (tdev, &cdev->tiles,
						    x, y, w, h,
		    gx_no_color_index, color, cdev->phase.x, cdev->phase.y);
}

/* Calculate the X offset corresponding to a given Y, taking the phase */
/* and shift into account. */
#define x_offset(ty, cdev)\
  ((cdev)->phase.x + (((ty) + (cdev)->phase.y) / (cdev)->tiles.rep_height) *\
   (cdev)->tiles.rep_shift)

/* Copy a monochrome bitmap.  We divide it up into maximal chunks */
/* that line up with a single tile, and then do the obvious Boolean */
/* combination of the tile mask and the source. */
static int
tile_clip_copy_mono(gx_device * dev,
		const byte * data, int sourcex, int raster, gx_bitmap_id id,
		    int x, int y, int w, int h,
		    gx_color_index color0, gx_color_index color1)
{
    gx_device_tile_clip *cdev = (gx_device_tile_clip *) dev;
    gx_color_index color, mcolor0, mcolor1;
    int ty, ny;
    int code;

    setup_mask_copy_mono(cdev, color, mcolor0, mcolor1);
    for (ty = y; ty < y + h; ty += ny) {
	int tx, nx;
	int cy = (ty + cdev->phase.y) % cdev->tiles.rep_height;
	int xoff = x_offset(ty, cdev);

	ny = min(y + h - ty, cdev->tiles.size.y - cy);
	if (ny > cdev->mdev.height)
	    ny = cdev->mdev.height;
	for (tx = x; tx < x + w; tx += nx) {
	    int cx = (tx + xoff) % cdev->tiles.rep_width;

	    nx = min(x + w - tx, cdev->tiles.size.x - cx);
	    /* Copy a tile slice to the memory device buffer. */
	    memcpy(cdev->buffer.bytes,
		   cdev->tiles.data + cy * cdev->tiles.raster,
		   cdev->tiles.raster * ny);
	    /* Intersect the tile with the source data. */
	    /* mcolor0 and mcolor1 invert the data if needed. */
	    /* This call can't fail. */
	    (*dev_proc(&cdev->mdev, copy_mono)) ((gx_device *) & cdev->mdev,
				 data + (ty - y) * raster, sourcex + tx - x,
						 raster, gx_no_bitmap_id,
					   cx, 0, nx, ny, mcolor0, mcolor1);
	    /* Now copy the color through the double mask. */
	    code = (*dev_proc(cdev->target, copy_mono)) (cdev->target,
				 cdev->buffer.bytes, cx, cdev->tiles.raster,
							 gx_no_bitmap_id,
				  tx, ty, nx, ny, gx_no_color_index, color);
	    if (code < 0)
		return code;
	}
    }
    return 0;
}

/*
 * Define the skeleton for the other copying operations.  We can't use the
 * BitBlt tricks: we have to scan for runs of 1s.  There are many obvious
 * ways to speed this up; we'll implement some if we need to.  The schema
 * is:
 *      FOR_RUNS(data_row, tx1, tx, ty) {
 *        ... process the run ([tx1,tx),ty) ...
 *      } END_FOR_RUNS();
 * Free variables: cdev, data, sourcex, raster, x, y, w, h.
 */
#define t_next(tx)\
  BEGIN {\
    if ( ++cx == cdev->tiles.size.x )\
      cx = 0, tp = tile_row, tbit = 0x80;\
    else if ( (tbit >>= 1) == 0 )\
      tp++, tbit = 0x80;\
    tx++;\
  } END
#define FOR_RUNS(data_row, tx1, tx, ty)\
	const byte *data_row = data;\
	int cy = (y + cdev->phase.y) % cdev->tiles.rep_height;\
	const byte *tile_row = cdev->tiles.data + cy * cdev->tiles.raster;\
	int ty;\
\
	for ( ty = y; ty < y + h; ty++, data_row += raster ) {\
	  int cx = (x + x_offset(ty, cdev)) % cdev->tiles.rep_width;\
	  const byte *tp = tile_row + (cx >> 3);\
	  byte tbit = 0x80 >> (cx & 7);\
	  int tx;\
\
	  for ( tx = x; tx < x + w; ) {\
	    int tx1;\
\
	    /* Skip a run of 0s. */\
	    while ( tx < x + w && (*tp & tbit) == 0 )\
	      t_next(tx);\
	    if ( tx == x + w )\
	      break;\
	    /* Scan a run of 1s. */\
	    tx1 = tx;\
	    do {\
	      t_next(tx);\
	    } while ( tx < x + w && (*tp & tbit) != 0 );\
	    if_debug3('T', "[T]run x=(%d,%d), y=%d\n", tx1, tx, ty);
/* (body goes here) */
#define END_FOR_RUNS()\
	  }\
	  if ( ++cy == cdev->tiles.size.y )\
	    cy = 0, tile_row = cdev->tiles.data;\
	  else\
	    tile_row += cdev->tiles.raster;\
	}

/* Copy a color rectangle. */
static int
tile_clip_copy_color(gx_device * dev,
		const byte * data, int sourcex, int raster, gx_bitmap_id id,
		     int x, int y, int w, int h)
{
    gx_device_tile_clip *cdev = (gx_device_tile_clip *) dev;

    fit_copy(dev, data, sourcex, raster, id, x, y, w, h);
    {
	FOR_RUNS(data_row, txrun, tx, ty) {
	    /* Copy the run. */
	    int code = (*dev_proc(cdev->target, copy_color))
	    (cdev->target, data_row, sourcex + txrun - x, raster,
	     gx_no_bitmap_id, txrun, ty, tx - txrun, 1);

	    if (code < 0)
		return code;
	}
	END_FOR_RUNS();
    }
    return 0;
}

/* Copy an alpha rectangle similarly. */
static int
tile_clip_copy_alpha(gx_device * dev,
		const byte * data, int sourcex, int raster, gx_bitmap_id id,
		int x, int y, int w, int h, gx_color_index color, int depth)
{
    gx_device_tile_clip *cdev = (gx_device_tile_clip *) dev;

    fit_copy(dev, data, sourcex, raster, id, x, y, w, h);
    {
	FOR_RUNS(data_row, txrun, tx, ty) {
	    /* Copy the run. */
	    int code = (*dev_proc(cdev->target, copy_alpha))
	    (cdev->target, data_row, sourcex + txrun - x, raster,
	     gx_no_bitmap_id, txrun, ty, tx - txrun, 1, color, depth);

	    if (code < 0)
		return code;
	}
	END_FOR_RUNS();
    }
    return 0;
}

/* Copy a RasterOp rectangle similarly. */
static int
tile_clip_strip_copy_rop(gx_device * dev,
	       const byte * data, int sourcex, uint raster, gx_bitmap_id id,
			 const gx_color_index * scolors,
	   const gx_strip_bitmap * textures, const gx_color_index * tcolors,
			 int x, int y, int w, int h,
		       int phase_x, int phase_y, gs_logical_operation_t lop)
{
    gx_device_tile_clip *cdev = (gx_device_tile_clip *) dev;

    fit_copy(dev, data, sourcex, raster, id, x, y, w, h);
    {
	FOR_RUNS(data_row, txrun, tx, ty) {
	    /* Copy the run. */
	    int code = (*dev_proc(cdev->target, strip_copy_rop))
	    (cdev->target, data_row, sourcex + txrun - x, raster,
	     gx_no_bitmap_id, scolors, textures, tcolors,
	     txrun, ty, tx - txrun, 1, phase_x, phase_y, lop);

	    if (code < 0)
		return code;
	}
	END_FOR_RUNS();
    }
    return 0;
}