/* Copyright (C) 2001-2006 Artifex Software, Inc.
   All Rights Reserved.
  
   This software is provided AS-IS with no warranty, either express or
   implied.

   This software is distributed under license and may not be copied, modified
   or distributed except as expressly authorized under the terms of that
   license.  Refer to licensing information at http://www.artifex.com/
   or contact Artifex Software, Inc.,  7 Mt. Lassen Drive - Suite A-134,
   San Rafael, CA  94903, U.S.A., +1(415)492-9861, for further information.
*/

/* $Id: sfxstdio.c 8542 2008-02-24 02:58:34Z alexcher $ */
/* File stream implementation using stdio */
#include "stdio_.h"		/* includes std.h */
#include "memory_.h"
#include "unistd_.h"
#include "gsmemory.h"
#include "gdebug.h"
#include "gpcheck.h"
#include "gp.h"
#include "gserror.h"
#include "gserrors.h"
#include "stream.h"
#include "strimpl.h"

/* Forward references for file stream procedures */
static int
    s_file_available(stream *, long *),
    s_file_read_seek(stream *, long),
    s_file_read_close(stream *),
    s_file_read_process(stream_state *, stream_cursor_read *,
			stream_cursor_write *, bool);
static int
    s_file_write_seek(stream *, long),
    s_file_write_flush(stream *),
    s_file_write_close(stream *),
    s_file_write_process(stream_state *, stream_cursor_read *,
			 stream_cursor_write *, bool);
static int
    s_file_switch(stream *, bool);

/* ------ File reading ------ */

/* Initialize a stream for reading an OS file. */
void
sread_file(register stream * s, FILE * file, byte * buf, uint len)
{
    static const stream_procs p = {
	s_file_available, s_file_read_seek, s_std_read_reset,
	s_std_read_flush, s_file_read_close, s_file_read_process,
	s_file_switch
    };
    /*
     * There is no really portable way to test seekability, but this should
     * work on most systems.  Note that if our probe sets the ferror bit for
     * the stream, we have to clear it again to avoid trouble later.
     */
    int had_error = ferror(file);
    long curpos = ftell(file);
    bool seekable = (curpos != -1L && fseek(file, curpos, SEEK_SET) == 0);

    if (!had_error)
	clearerr(file);
    s_std_init(s, buf, len, &p,
	       (seekable ? s_mode_read + s_mode_seek : s_mode_read));
    if_debug1('s', "[s]read file=0x%lx\n", (ulong) file);
    s->file = file;
    s->file_modes = s->modes;
    s->file_offset = 0;
    s->file_limit = max_long;
}

/* Confine reading to a subfile.  This is primarily for reusable streams. */
int
sread_subfile(stream *s, long start, long length)
{
    if (s->file == 0 || s->modes != s_mode_read + s_mode_seek ||
	s->file_offset != 0 || s->file_limit != max_long ||
	((s->position < start || s->position > start + length) &&
	 sseek(s, start) < 0)
	)
	return ERRC;
    s->position -= start;
    s->file_offset = start;
    s->file_limit = length;
    return 0;
}

/* Procedures for reading from a file */
static int
s_file_available(register stream * s, long *pl)
{
    long max_avail = s->file_limit - stell(s);
    long buf_avail = sbufavailable(s);

    *pl = min(max_avail, buf_avail);
    if (sseekable(s)) {
	long pos, end;

	pos = ftell(s->file);
	if (fseek(s->file, 0L, SEEK_END))
	    return ERRC;
	end = ftell(s->file);
	if (fseek(s->file, pos, SEEK_SET))
	    return ERRC;
	buf_avail += end - pos;
	*pl = min(max_avail, buf_avail);
	if (*pl == 0)
	    *pl = -1;		/* EOF */
    } else {
	if (*pl == 0 && feof(s->file))
	    *pl = -1;		/* EOF */
    }
    return 0;
}
static int
s_file_read_seek(register stream * s, long pos)
{
    uint end = s->srlimit - s->cbuf + 1;
    long offset = pos - s->position;

    if (offset >= 0 && offset <= end) {  /* Staying within the same buffer */
	s->srptr = s->cbuf + offset - 1;
	return 0;
    }
    if (pos < 0 || pos > s->file_limit ||
	fseek(s->file, s->file_offset + pos, SEEK_SET) != 0
	)
	return ERRC;
    s->srptr = s->srlimit = s->cbuf - 1;
    s->end_status = 0;
    s->position = pos;
    return 0;
}
static int
s_file_read_close(stream * s)
{
    FILE *file = s->file;

    if (file != 0) {
	s->file = 0;
	return (fclose(file) ? ERRC : 0);
    }
    return 0;
}

/*
 * Process a buffer for a file reading stream.
 * This is the first stream in the pipeline, so pr is irrelevant.
 */
static int
s_file_read_process(stream_state * st, stream_cursor_read * ignore_pr,
		    stream_cursor_write * pw, bool last)
{
    stream *s = (stream *)st;	/* no separate state */
    FILE *file = s->file;
    uint max_count = pw->limit - pw->ptr;
    int status = 1;
    int count;

    if (s->file_limit < max_long) {
	long limit_count = s->file_offset + s->file_limit - ftell(file);

	if (max_count > limit_count)
	    max_count = limit_count, status = EOFC;
    }
    count = fread(pw->ptr + 1, 1, max_count, file);
    if (count < 0)
	count = 0;
    pw->ptr += count;
    process_interrupts(s->memory);
    return (ferror(file) ? ERRC : feof(file) ? EOFC : status);
}

/* ------ File writing ------ */

/* Initialize a stream for writing an OS file. */
void
swrite_file(register stream * s, FILE * file, byte * buf, uint len)
{
    static const stream_procs p = {
	s_std_noavailable, s_file_write_seek, s_std_write_reset,
	s_file_write_flush, s_file_write_close, s_file_write_process,
	s_file_switch
    };

    s_std_init(s, buf, len, &p,
	       (file == stdout ? s_mode_write : s_mode_write + s_mode_seek));
    if_debug1('s', "[s]write file=0x%lx\n", (ulong) file);
    s->file = file;
    s->file_modes = s->modes;
    s->file_offset = 0;		/* in case we switch to reading later */
    s->file_limit = max_long;	/* ibid. */
}
/* Initialize for appending to an OS file. */
void
sappend_file(register stream * s, FILE * file, byte * buf, uint len)
{
    swrite_file(s, file, buf, len);
    s->modes = s_mode_write + s_mode_append;	/* no seek */
    s->file_modes = s->modes;
    fseek(file, 0L, SEEK_END);
    s->position = ftell(file);
}
/* Procedures for writing on a file */
static int
s_file_write_seek(stream * s, long pos)
{
    /* We must flush the buffer to reposition. */
    int code = sflush(s);

    if (code < 0)
	return code;
    if (fseek(s->file, pos, SEEK_SET) != 0)
	return ERRC;
    s->position = pos;
    return 0;
}
static int
s_file_write_flush(register stream * s)
{
    int result = s_process_write_buf(s, false);

    fflush(s->file);
    return result;
}
static int
s_file_write_close(register stream * s)
{
    s_process_write_buf(s, true);
    return s_file_read_close(s);
}

/*
 * Process a buffer for a file writing stream.
 * This is the last stream in the pipeline, so pw is irrelevant.
 */
static int
s_file_write_process(stream_state * st, stream_cursor_read * pr,
		     stream_cursor_write * ignore_pw, bool last)
{
    uint count = pr->limit - pr->ptr;

    /*
     * The DEC C library on AXP architectures gives an error on
     * fwrite if the count is zero!
     */
    if (count != 0) {
	FILE *file = ((stream *) st)->file;
	int written = fwrite(pr->ptr + 1, 1, count, file);

	if (written < 0)
	    written = 0;
	pr->ptr += written;
	process_interrupts(NULL);
	return (ferror(file) ? ERRC : 0);
    } else {
	process_interrupts(NULL);
	return 0;
    }
}

/* ------ File switching ------ */

/* Switch a file stream to reading or writing. */
static int
s_file_switch(stream * s, bool writing)
{
    uint modes = s->file_modes;
    FILE *file = s->file;
    long pos;

    if (writing) {
	if (!(s->file_modes & s_mode_write))
	    return ERRC;
	pos = stell(s);
	if_debug2('s', "[s]switch 0x%lx to write at %ld\n",
		  (ulong) s, pos);
	fseek(file, pos, SEEK_SET);
	if (modes & s_mode_append) {
	    sappend_file(s, file, s->cbuf, s->cbsize);	/* sets position */
	} else {
	    swrite_file(s, file, s->cbuf, s->cbsize);
	    s->position = pos;
	}
	s->modes = modes;
    } else {
	if (!(s->file_modes & s_mode_read))
	    return ERRC;
	pos = stell(s);
	if_debug2('s', "[s]switch 0x%lx to read at %ld\n",
		  (ulong) s, pos);
	if (sflush(s) < 0)
	    return ERRC;
	fseek(file, 0L, SEEK_CUR);	/* pacify C library */
	sread_file(s, file, s->cbuf, s->cbsize);
	s->modes |= modes & s_mode_append;	/* don't lose append info */
	s->position = pos;
    }
    s->file_modes = modes;
    return 0;
}