/* Copyright (C) 2001-2012 Artifex Software, Inc. All Rights Reserved. This software is provided AS-IS with no warranty, either express or implied. This software is distributed under license and may not be copied, modified or distributed except as expressly authorized under the terms of the license contained in the file LICENSE in this distribution. Refer to licensing information at http://www.artifex.com or contact Artifex Software, Inc., 7 Mt. Lassen Drive - Suite A-134, San Rafael, CA 94903, U.S.A., +1(415)492-9861, for further information. */ /* Command list - Support for multiple rendering threads */ #include "memory_.h" #include "gx.h" #include "gp.h" #include "gpcheck.h" #include "gxsync.h" #include "gserrors.h" #include "gxdevice.h" #include "gsdevice.h" #include "gxdevmem.h" /* must precede gxcldev.h */ #include "gdevprn.h" /* must precede gxcldev.h */ #include "gxcldev.h" #include "gxgetbit.h" #include "gdevplnx.h" #include "gdevppla.h" #include "gsmemory.h" #include "gsmchunk.h" #include "gsmemlok.h" #include "gxclthrd.h" #include "gdevdevn.h" #include "gsicc_cache.h" /* Forward reference prototypes */ static int clist_start_render_thread(gx_device *dev, int thread_index, int band); static void clist_render_thread(void *param); /* clone a device and set params and its chunk memory */ /* The chunk_base_mem MUST be thread safe */ /* Return NULL on error, or the cloned device with the dev->memory set */ /* to the chunk allocator. */ /* Exported for use by background printing. */ gx_device * setup_device_and_mem_for_thread(gs_memory_t *chunk_base_mem, gx_device *dev, bool bg_print, gsicc_link_cache_t **cachep) { int i, code; char fmode[4]; gs_memory_t *thread_mem; gx_device_clist *cldev = (gx_device_clist *)dev; gx_device_printer *pdev = (gx_device_printer *)dev; gx_device_clist_common *cdev = (gx_device_clist_common *)cldev; gx_device *ndev; gx_device_clist *ncldev; gx_device_clist_common *ncdev; gx_device_printer *npdev; gx_device *protodev; gs_c_param_list paramlist; gs_devn_params *pclist_devn_params; /* Every thread will have a 'chunk allocator' to reduce the interaction * with the 'base' allocator which has 'mutex' (locking) protection. * This improves performance of the threads. */ if ((code = gs_memory_chunk_wrap(&(thread_mem), chunk_base_mem )) < 0) { emprintf1(dev->memory, "chunk_wrap returned error code: %d\n", code); return NULL; } /* Find the prototype for this device (needed so we can copy from it) */ for (i=0; (protodev = (gx_device *)gs_getdevice(i)) != NULL; i++) if (strcmp(protodev->dname, dev->dname) == 0) break; /* Clone the device from the prototype device */ if (protodev == NULL || (code = gs_copydevice((gx_device **) &ndev, protodev, thread_mem)) < 0) { gs_memory_chunk_release(thread_mem); return NULL; } ncldev = (gx_device_clist *)ndev; ncdev = (gx_device_clist_common *)ndev; npdev = (gx_device_printer *)ndev; gx_device_fill_in_procs(ndev); ((gx_device_printer *)ncdev)->buffer_memory = ncdev->memory = ncdev->bandlist_memory = thread_mem; ndev->PageCount = dev->PageCount; /* copy to prevent mismatch error */ npdev->file = pdev->file; /* For background printing when doing N copies with %d */ strcpy((npdev->fname), (pdev->fname)); ndev->color_info = dev->color_info; /* copy before putdeviceparams */ ndev->pad = dev->pad; ndev->log2_align_mod = dev->log2_align_mod; ndev->is_planar = dev->is_planar; #if CMM_THREAD_SAFE ndev->icc_struct = dev->icc_struct; /* Set before put params */ rc_increment(ndev->icc_struct); #endif /* get the current device parameters to put into the cloned device */ gs_c_param_list_write(¶mlist, dev->memory); if ((code = gs_getdeviceparams(dev, (gs_param_list *)¶mlist)) < 0) { emprintf1(dev->memory, "Error getting device params, code=%d. Rendering threads not started.\n", code); goto out_cleanup; } gs_c_param_list_read(¶mlist); if ((code = gs_putdeviceparams(ndev, (gs_param_list *)¶mlist)) < 0) goto out_cleanup; gs_c_param_list_release(¶mlist); /* In the case of a separation device, we need to make sure we get the devn params copied over */ pclist_devn_params = dev_proc(dev, ret_devn_params)(dev); if (pclist_devn_params != NULL) { code = devn_copy_params(dev, ndev); if (code < 0) { #ifdef DEBUG /* suppress a warning on a release build */ gs_note_error(gs_error_VMerror); #endif goto out_cleanup; } } /* Also make sure supports_devn is set correctly */ ndev->icc_struct->supports_devn = cdev->icc_struct->supports_devn; ncdev->page_uses_transparency = cdev->page_uses_transparency; if_debug3m(gs_debug_flag_icc, cdev->memory, "[icc] MT clist device = 0x%p profile = 0x%p handle = 0x%p\n", ncdev, ncdev->icc_struct->device_profile[0], ncdev->icc_struct->device_profile[0]->profile_handle); /* If the device is_planar, then set the flag in the new_device and the procs */ if ((ncdev->is_planar = cdev->is_planar)) gdev_prn_set_procs_planar(ndev); /* gdev_prn_allocate_memory sets the clist for writing, creating new files. * We need to unlink those files and open the main thread's files, then * reset the clist state for reading/rendering */ if ((code = gdev_prn_allocate_memory(ndev, NULL, ndev->width, ndev->height)) < 0) goto out_cleanup; /* close and unlink the temp files just created */ ncdev->page_info.io_procs->fclose(ncdev->page_info.cfile, ncdev->page_info.cfname, true); ncdev->page_info.io_procs->fclose(ncdev->page_info.bfile, ncdev->page_info.bfname, true); ncdev->page_info.cfile = ncdev->page_info.bfile = NULL; /* open the main thread's files for this thread */ strcpy(fmode, "r"); /* read access for threads */ strncat(fmode, gp_fmode_binary_suffix, 1); if ((code=cdev->page_info.io_procs->fopen(cdev->page_info.cfname, fmode, &ncdev->page_info.cfile, thread_mem, thread_mem, true)) < 0 || (code=cdev->page_info.io_procs->fopen(cdev->page_info.bfname, fmode, &ncdev->page_info.bfile, thread_mem, thread_mem, false)) < 0) goto out_cleanup; strcpy((ncdev->page_info.cfname), (cdev->page_info.cfname)); strcpy((ncdev->page_info.bfname), (cdev->page_info.bfname)); clist_render_init(ncldev); /* Initialize clist device for reading */ ncdev->page_info.bfile_end_pos = cdev->page_info.bfile_end_pos; /* The threads are maintained until clist_finish_page. At which point, the threads are torn down, the master clist reader device is changed to writer, and the icc_table and the icc_cache_cl freed */ #if CMM_THREAD_SAFE /* safe to share the link cache */ ncdev->icc_cache_cl = cdev->icc_cache_cl; rc_increment(cdev->icc_cache_cl, "setup_render_thread"); #else /* each thread needs its own link cache */ if (cachep != NULL) { if (*cachep == NULL) { /* We don't have one cached that we can reuse, so make one. */ if ((*cachep = gsicc_cache_new(thread_mem->thread_safe_memory)) == NULL) goto out_cleanup; } rc_increment(*cachep); ncdev->icc_cache_cl = *cachep; } else if ((ncdev->icc_cache_cl = gsicc_cache_new(thread_mem)) == NULL) goto out_cleanup; #endif if (bg_print) { gx_device_clist_reader *ncrdev = (gx_device_clist_reader *)ncdev; if (cdev->icc_table != NULL) { /* This is a background printing thread, so it cannot share the icc_table */ /* since this probably was created with a GC'ed allocator and the bg_print */ /* thread can't deal with the relocation. Free the cdev->icc_table and get */ /* a new one from the clist. */ clist_free_icc_table(cdev->icc_table, cdev->memory); cdev->icc_table = NULL; if ((code = clist_read_icctable((gx_device_clist_reader *)ncdev)) < 0) goto out_cleanup; } /* Similarly for the color_usage_array, when the foreground device switches to */ /* writer mode, the foreground's array will be freed. */ if ((code = clist_read_color_usage_array(ncrdev)) < 0) goto out_cleanup; } else { /* Use the same profile table and color usage array in each thread */ ncdev->icc_table = cdev->icc_table; /* OK for multiple rendering threads */ ((gx_device_clist_reader *)ncdev)->color_usage_array = ((gx_device_clist_reader *)cdev)->color_usage_array; } /* Needed for case when the target has cielab profile and pdf14 device has a RGB profile stored in the profile list of the clist */ ncdev->trans_dev_icc_hash = cdev->trans_dev_icc_hash; /* success */ return ndev; out_cleanup: /* Close the file handles, but don't delete (unlink) the files */ if (ncdev->page_info.bfile != NULL) ncdev->page_info.io_procs->fclose(ncdev->page_info.bfile, ncdev->page_info.bfname, false); if (ncdev->page_info.cfile != NULL) ncdev->page_info.io_procs->fclose(ncdev->page_info.cfile, ncdev->page_info.cfname, false); ncdev->do_not_open_or_close_bandfiles = true; /* we already closed the files */ if (ndev != NULL) { gdev_prn_free_memory(ndev); gs_free_object(thread_mem, ndev, "setup_device_and_mem_for_thread"); } gs_memory_chunk_release(thread_mem); return NULL; } /* Set up and start the render threads */ static int clist_setup_render_threads(gx_device *dev, int y, gx_process_page_options_t *options) { gx_device_printer *pdev = (gx_device_printer *)dev; gx_device_clist *cldev = (gx_device_clist *)dev; gx_device_clist_common *cdev = (gx_device_clist_common *)cldev; gx_device_clist_reader *crdev = &cldev->reader; gs_memory_t *mem = cdev->bandlist_memory; gs_memory_t *chunk_base_mem = mem->thread_safe_memory; gs_memory_status_t mem_status; int i, band; int code = 0; int band_count = cdev->nbands; int band_height = crdev->page_info.band_params.BandHeight; crdev->num_render_threads = pdev->num_render_threads_requested; if(gs_debug[':'] != 0) dmprintf1(mem, "%% %d rendering threads requested.\n", pdev->num_render_threads_requested); if (crdev->num_render_threads > band_count) crdev->num_render_threads = band_count; /* don't bother starting more threads than bands */ /* Allocate and initialize an array of thread control structures */ crdev->render_threads = (clist_render_thread_control_t *) gs_alloc_byte_array(mem, crdev->num_render_threads, sizeof(clist_render_thread_control_t), "clist_setup_render_threads" ); /* fallback to non-threaded if allocation fails */ if (crdev->render_threads == NULL) { emprintf(mem, " VMerror prevented threads from starting.\n"); return_error(gs_error_VMerror); } memset(crdev->render_threads, 0, crdev->num_render_threads * sizeof(clist_render_thread_control_t)); crdev->main_thread_data = cdev->data; /* save data area */ /* Based on the line number requested, decide the order of band rendering */ /* Almost all devices go in increasing line order (except the bmp* devices ) */ crdev->thread_lookahead_direction = (y < (cdev->height - 1)) ? 1 : -1; band = y / band_height; /* If the 'mem' is not thread safe, we need to wrap it in a locking memory */ gs_memory_status(chunk_base_mem, &mem_status); if (mem_status.is_thread_safe == false) { return_error(gs_error_VMerror); } /* If we don't have one large enough already, create an icc cache list */ if (crdev->num_render_threads > crdev->icc_cache_list_len) { void *old = crdev->icc_cache_list; crdev->icc_cache_list = gs_alloc_byte_array(mem->thread_safe_memory, crdev->num_render_threads, sizeof(void*), "clist_render_setup_threads"); if (crdev->icc_cache_list == NULL) { crdev->icc_cache_list = NULL; return_error(gs_error_VMerror); } if (crdev->icc_cache_list_len > 0) memcpy(crdev->icc_cache_list, old, sizeof(void *)*crdev->icc_cache_list_len); memset(&crdev->icc_cache_list[crdev->icc_cache_list_len], 0, (crdev->num_render_threads - crdev->icc_cache_list_len) * sizeof(void *)); crdev->icc_cache_list_len = crdev->num_render_threads; gs_free_object(mem, old, "clist_render_setup_threads"); } /* Loop creating the devices and semaphores for each thread, then start them */ for (i=0; (i < crdev->num_render_threads) && (band >= 0) && (band < band_count); i++, band += crdev->thread_lookahead_direction) { gx_device *ndev; clist_render_thread_control_t *thread = &(crdev->render_threads[i]); ndev = setup_device_and_mem_for_thread(chunk_base_mem, dev, false, &crdev->icc_cache_list[i]); if (ndev == NULL) { code = gs_error_VMerror; /* set code to an error for cleanup after the loop */ break; } thread->cdev = ndev; thread->memory = ndev->memory; thread->band = -1; /* a value that won't match any valid band */ thread->options = options; thread->buffer = NULL; if (options && options->init_buffer_fn) { code = options->init_buffer_fn(options->arg, dev, thread->memory, dev->width, band_height, &thread->buffer); if (code < 0) break; } /* create the buf device for this thread, and allocate the semaphores */ if ((code = gdev_create_buf_device(cdev->buf_procs.create_buf_device, &(thread->bdev), ndev, band*crdev->page_band_height, NULL, thread->memory, &(crdev->color_usage_array[0])) < 0)) break; if ((thread->sema_this = gx_semaphore_alloc(thread->memory)) == NULL || (thread->sema_group = gx_semaphore_alloc(thread->memory)) == NULL) { code = gs_error_VMerror; break; } /* Start thread 'i' to do band */ if ((code = clist_start_render_thread(dev, i, band)) < 0) break; } /* If the code < 0, the last thread creation failed -- clean it up */ if (code < 0) { band -= crdev->thread_lookahead_direction; /* update for 'next_band' usage */ /* the following relies on 'free' ignoring NULL pointers */ gx_semaphore_free(crdev->render_threads[i].sema_group); gx_semaphore_free(crdev->render_threads[i].sema_this); if (crdev->render_threads[i].bdev != NULL) cdev->buf_procs.destroy_buf_device(crdev->render_threads[i].bdev); if (crdev->render_threads[i].cdev != NULL) { gx_device_clist_common *thread_cdev = (gx_device_clist_common *)crdev->render_threads[i].cdev; /* Close the file handles, but don't delete (unlink) the files */ thread_cdev->page_info.io_procs->fclose(thread_cdev->page_info.bfile, thread_cdev->page_info.bfname, false); thread_cdev->page_info.io_procs->fclose(thread_cdev->page_info.cfile, thread_cdev->page_info.cfname, false); thread_cdev->do_not_open_or_close_bandfiles = true; /* we already closed the files */ gdev_prn_free_memory((gx_device *)thread_cdev); gs_free_object(crdev->render_threads[i].memory, thread_cdev, "clist_setup_render_threads"); } if (crdev->render_threads[i].buffer != NULL && options && options->free_buffer_fn != NULL) { options->free_buffer_fn(options->arg, dev, crdev->render_threads[i].memory, crdev->render_threads[i].buffer); crdev->render_threads[i].buffer = NULL; } if (crdev->render_threads[i].memory != NULL) { gs_memory_chunk_release(crdev->render_threads[i].memory); crdev->render_threads[i].memory = NULL; } } /* If we weren't able to create at least one thread, punt */ /* Although a single thread isn't any more efficient, the */ /* machinery still works, so that's OK. */ if (i == 0) { if (crdev->render_threads[0].memory != NULL) { gs_memory_chunk_release(crdev->render_threads[0].memory); /* free up the locking wrapper if we allocated one */ if (chunk_base_mem != mem) { gs_memory_locked_release((gs_memory_locked_t *)chunk_base_mem); gs_free_object(mem, chunk_base_mem, "clist_setup_render_threads(locked allocator)"); } } gs_free_object(mem, crdev->render_threads, "clist_setup_render_threads"); crdev->render_threads = NULL; /* restore the file pointers */ if (cdev->page_info.cfile == NULL) { char fmode[4]; strcpy(fmode, "a+"); /* file already exists and we want to re-use it */ strncat(fmode, gp_fmode_binary_suffix, 1); cdev->page_info.io_procs->fopen(cdev->page_info.cfname, fmode, &cdev->page_info.cfile, mem, cdev->bandlist_memory, true); cdev->page_info.io_procs->fseek(cdev->page_info.cfile, 0, SEEK_SET, cdev->page_info.cfname); cdev->page_info.io_procs->fopen(cdev->page_info.bfname, fmode, &cdev->page_info.bfile, mem, cdev->bandlist_memory, false); cdev->page_info.io_procs->fseek(cdev->page_info.bfile, 0, SEEK_SET, cdev->page_info.bfname); } emprintf1(mem, "Rendering threads not started, code=%d.\n", code); return_error(code); } crdev->num_render_threads = i; crdev->curr_render_thread = 0; crdev->next_band = band; if(gs_debug[':'] != 0) dmprintf1(mem, "%% Using %d rendering threads\n", i); return 0; } /* This is also exported for teardown after background printing */ void teardown_device_and_mem_for_thread(gx_device *dev, gp_thread_id thread_id, bool bg_print) { gx_device_clist_common *thread_cdev = (gx_device_clist_common *)dev; gx_device_clist_reader *thread_crdev = (gx_device_clist_reader *)dev; gs_memory_t *thread_memory = dev->memory; /* First finish the thread */ gp_thread_finish(thread_id); if (bg_print) { /* we are cleaning up a background printing thread, so we clean up similarly to */ /* what is done by clist_finish_page, but without re-opening the clist files. */ clist_teardown_render_threads(dev); /* we may have used multiple threads */ /* free the thread's icc_table since this was not done by clist_finish_page */ clist_free_icc_table(thread_crdev->icc_table, thread_memory); thread_crdev->icc_table = NULL; /* NB: gdev_prn_free_memory below will free the color_usage_array */ } else { /* make sure this doesn't get freed by gdev_prn_free_memory below */ ((gx_device_clist_reader *)thread_cdev)->color_usage_array = NULL; } rc_decrement(thread_crdev->icc_cache_cl, "teardown_render_thread"); thread_crdev->icc_cache_cl = NULL; /* * Free the BufferSpace, close the band files, optionally unlinking them. * We unlink the files if this call is cleaning up from bg printing. * Note that the BufferSpace is freed using 'ppdev->buf' so the 'data' * pointer doesn't need to be the one that the thread started with */ /* If this thread was being used for background printing and NumRenderingThreads > 0 */ /* the clist_setup_render_threads may have already closed these files */ if (thread_cdev->page_info.cfile != NULL) thread_cdev->page_info.io_procs->fclose(thread_cdev->page_info.bfile, thread_cdev->page_info.bfname, bg_print); if (thread_cdev->page_info.bfile != NULL) thread_cdev->page_info.io_procs->fclose(thread_cdev->page_info.cfile, thread_cdev->page_info.cfname, bg_print); thread_cdev->do_not_open_or_close_bandfiles = true; /* we already closed the files */ gdev_prn_free_memory((gx_device *)thread_cdev); /* Free the device copy this thread used. Note that the deviceN stuff if was allocated and copied earlier for the device will be freed with this call and the icc_struct ref count will be decremented. */ gs_free_object(thread_memory, thread_cdev, "clist_teardown_render_threads"); #ifdef DEBUG dmprintf(thread_memory, "rendering thread ending memory state...\n"); gs_memory_chunk_dump_memory(thread_memory); dmprintf(thread_memory, " memory dump done.\n"); #endif gs_memory_chunk_release(thread_memory); } void clist_teardown_render_threads(gx_device *dev) { gx_device_clist *cldev = (gx_device_clist *)dev; gx_device_clist_common *cdev = (gx_device_clist_common *)dev; gx_device_clist_reader *crdev = &cldev->reader; gs_memory_t *mem = cdev->bandlist_memory; int i; if (crdev->render_threads != NULL) { /* Wait for each thread to finish then free its memory */ for (i = (crdev->num_render_threads - 1); i >= 0; i--) { clist_render_thread_control_t *thread = &(crdev->render_threads[i]); gx_device_clist_common *thread_cdev = (gx_device_clist_common *)thread->cdev; if (thread->status == THREAD_BUSY) gx_semaphore_wait(thread->sema_this); /* Free control semaphores */ gx_semaphore_free(thread->sema_group); gx_semaphore_free(thread->sema_this); /* destroy the thread's buffer device */ thread_cdev->buf_procs.destroy_buf_device(thread->bdev); if (thread->options) { if (thread->options->free_buffer_fn && thread->buffer) { thread->options->free_buffer_fn(thread->options->arg, dev, thread->memory, thread->buffer); thread->buffer = NULL; } thread->options = NULL; } /* before freeing this device's memory, swap with cdev if it was the main_thread_data */ if (thread_cdev->data == crdev->main_thread_data) { thread_cdev->data = cdev->data; cdev->data = crdev->main_thread_data; } #ifdef DEBUG if (gs_debug[':']) dmprintf2(thread->memory, "%% Thread %d total usertime=%ld msec\n", i, thread->cputime); dmprintf1(thread->memory, "\nThread %d ", i); #endif teardown_device_and_mem_for_thread((gx_device *)thread_cdev, thread->thread, false); } gs_free_object(mem, crdev->render_threads, "clist_teardown_render_threads"); crdev->render_threads = NULL; /* Now re-open the clist temp files so we can write to them */ if (cdev->page_info.cfile == NULL) { char fmode[4]; strcpy(fmode, "a+"); /* file already exists and we want to re-use it */ strncat(fmode, gp_fmode_binary_suffix, 1); cdev->page_info.io_procs->fopen(cdev->page_info.cfname, fmode, &cdev->page_info.cfile, mem, cdev->bandlist_memory, true); cdev->page_info.io_procs->fseek(cdev->page_info.cfile, 0, SEEK_SET, cdev->page_info.cfname); cdev->page_info.io_procs->fopen(cdev->page_info.bfname, fmode, &cdev->page_info.bfile, mem, cdev->bandlist_memory, false); cdev->page_info.io_procs->fseek(cdev->page_info.bfile, 0, SEEK_SET, cdev->page_info.bfname); } } } static int clist_start_render_thread(gx_device *dev, int thread_index, int band) { gx_device_clist *cldev = (gx_device_clist *)dev; gx_device_clist_reader *crdev = &cldev->reader; int code; crdev->render_threads[thread_index].band = band; crdev->render_threads[thread_index].status = THREAD_BUSY; /* Finally, fire it up */ code = gp_thread_start(clist_render_thread, &(crdev->render_threads[thread_index]), &(crdev->render_threads[thread_index].thread)); return code; } static void clist_render_thread(void *data) { clist_render_thread_control_t *thread = (clist_render_thread_control_t *)data; gx_device *dev = thread->cdev; gx_device_clist *cldev = (gx_device_clist *)dev; gx_device_clist_reader *crdev = &cldev->reader; gx_device *bdev = thread->bdev; gs_int_rect band_rect; byte *mdata = crdev->data + crdev->page_tile_cache_size; byte *mlines = (crdev->page_line_ptrs_offset == 0 ? NULL : mdata + crdev->page_line_ptrs_offset); uint raster = gx_device_raster_plane(dev, NULL); int code; int band_height = crdev->page_band_height; int band = thread->band; int band_begin_line = band * band_height; int band_end_line = band_begin_line + band_height; int band_num_lines; #ifdef DEBUG long starttime[2], endtime[2]; gp_get_usertime(starttime); /* thread start time */ #endif if (band_end_line > dev->height) band_end_line = dev->height; band_num_lines = band_end_line - band_begin_line; code = crdev->buf_procs.setup_buf_device (bdev, mdata, raster, (byte **)mlines, 0, band_num_lines, band_num_lines); band_rect.p.x = 0; band_rect.p.y = band_begin_line; band_rect.q.x = dev->width; band_rect.q.y = band_end_line; if (code >= 0) code = clist_render_rectangle(cldev, &band_rect, bdev, NULL, true); if (code >= 0 && thread->options && thread->options->process_fn) code = thread->options->process_fn(thread->options->arg, dev, bdev, &band_rect, thread->buffer); /* Reset the band boundaries now */ crdev->ymin = band_begin_line; crdev->ymax = band_end_line; crdev->offset_map = NULL; if (code < 0) thread->status = THREAD_ERROR; /* shouldn't happen */ else thread->status = THREAD_DONE; /* OK */ #ifdef DEBUG gp_get_usertime(endtime); thread->cputime += (endtime[0] - starttime[0]) * 1000 + (endtime[1] - starttime[1]) / 1000000; #endif /* * Signal the semaphores. We signal the 'group' first since even if * the waiter is released on the group, it still needs to check * status on the thread */ gx_semaphore_signal(thread->sema_group); gx_semaphore_signal(thread->sema_this); } /* * Copy the raster data from the completed thread to the caller's * device (the main thread) * Return 0 if OK, < 0 is the error code from the thread * * After swapping the pointers, start up the completed thread with the * next band remaining to do (if any) */ static int clist_get_band_from_thread(gx_device *dev, int band_needed, gx_process_page_options_t *options) { gx_device_clist *cldev = (gx_device_clist *)dev; gx_device_clist_common *cdev = (gx_device_clist_common *)dev; gx_device_clist_reader *crdev = &cldev->reader; int i, code = 0; int thread_index = crdev->curr_render_thread; clist_render_thread_control_t *thread = &(crdev->render_threads[thread_index]); gx_device_clist_common *thread_cdev = (gx_device_clist_common *)thread->cdev; int band_height = crdev->page_info.band_params.BandHeight; int band_count = cdev->nbands; byte *tmp; /* for swapping data areas */ /* We expect that the thread needed will be the 'current' thread */ if (thread->band != band_needed) { int band = band_needed; /* Probably we went in the wrong direction, so let the threads */ /* all complete, then restart them in the opposite direction */ /* If the caller is 'bouncing around' we may end up back here, */ /* but that is a VERY rare case (we haven't seen it yet). */ for (i=0; i < crdev->num_render_threads; i++) { clist_render_thread_control_t *thread = &(crdev->render_threads[i]); if (thread->status == THREAD_BUSY) gx_semaphore_wait(thread->sema_this); } crdev->thread_lookahead_direction *= -1; /* reverse direction (but may be overruled below) */ if (band_needed == band_count-1) crdev->thread_lookahead_direction = -1; /* assume backwards if we are asking for the last band */ if (band_needed == 0) crdev->thread_lookahead_direction = 1; /* force forward if we are looking for band 0 */ /* Loop creating the devices and semaphores for each thread, then start them */ for (i=0; (i < crdev->num_render_threads) && (band >= 0) && (band < band_count); i++, band += crdev->thread_lookahead_direction) { thread = &(crdev->render_threads[i]); thread->band = -1; /* a value that won't match any valid band */ /* Start thread 'i' to do band */ if ((code = clist_start_render_thread(dev, i, band)) < 0) break; } crdev->next_band = i; /* may be < 0 or == band_count, but that is handled later */ crdev->curr_render_thread = thread_index = 0; thread = &(crdev->render_threads[0]); thread_cdev = (gx_device_clist_common *)thread->cdev; } /* Wait for this thread */ gx_semaphore_wait(thread->sema_this); gp_thread_finish(thread->thread); thread->thread = NULL; if (thread->status == THREAD_ERROR) return gs_error_unknownerror; /* FAIL */ if (options && options->output_fn) { code = options->output_fn(options->arg, dev, thread->buffer); if (code < 0) return code; } /* Swap the data areas to avoid the copy */ tmp = cdev->data; cdev->data = thread_cdev->data; thread_cdev->data = tmp; thread->status = THREAD_IDLE; /* the data is no longer valid */ thread->band = -1; /* Update the bounds for this band */ cdev->ymin = band_needed * band_height; cdev->ymax = cdev->ymin + band_height; if (cdev->ymax > dev->height) cdev->ymax = dev->height; if (crdev->next_band >= 0 && crdev->next_band < band_count) { code = clist_start_render_thread(dev, thread_index, crdev->next_band); crdev->next_band += crdev->thread_lookahead_direction; } /* bump the 'curr' to the next thread */ crdev->curr_render_thread = crdev->curr_render_thread == crdev->num_render_threads - 1 ? 0 : crdev->curr_render_thread + 1; return code; } /* Copy a rasterized rectangle to the client, rasterizing if needed. */ /* The first invocation starts multiple threads to perform "look ahead" */ /* rendering adjacent to the first band (forward or backward) */ static int clist_get_bits_rect_mt(gx_device *dev, const gs_int_rect * prect, gs_get_bits_params_t *params, gs_int_rect **unread) { gx_device_printer *pdev = (gx_device_printer *)dev; gx_device_clist *cldev = (gx_device_clist *)dev; gx_device_clist_common *cdev = (gx_device_clist_common *)dev; gx_device_clist_reader *crdev = &cldev->reader; gs_memory_t *mem = cdev->bandlist_memory; gs_get_bits_options_t options = params->options; int y = prect->p.y; int end_y = prect->q.y; int line_count = end_y - y; int band_height = crdev->page_info.band_params.BandHeight; int band = y / band_height; gs_int_rect band_rect; int lines_rasterized; gx_device *bdev; byte *mdata; uint raster = gx_device_raster(dev, 1); int my; int code = 0; /* This page might not want multiple threads */ /* Also we don't support plane extraction using multiple threads */ if (pdev->num_render_threads_requested < 1 || (options & GB_SELECT_PLANES)) return clist_get_bits_rectangle(dev, prect, params, unread); if (prect->p.x < 0 || prect->q.x > dev->width || y < 0 || end_y > dev->height ) return_error(gs_error_rangecheck); if (line_count <= 0 || prect->p.x >= prect->q.x) return 0; if (crdev->ymin < 0) if ((code = clist_close_writer_and_init_reader(cldev)) < 0) return code; /* can't recover from this */ if (crdev->ymin == 0 && crdev->ymax == 0 && crdev->render_threads == NULL) { /* Haven't done any rendering yet, try to set up the threads */ if (clist_setup_render_threads(dev, y, NULL) < 0) /* problem setting up the threads, revert to single threaded */ return clist_get_bits_rectangle(dev, prect, params, unread); } else { if (crdev->render_threads == NULL) { /* If we get here with with ymin and ymax > 0 it's because we closed the threads */ /* while doing a page due to an error. Use single threaded mode. */ return clist_get_bits_rectangle(dev, prect, params, unread); } } /* If we already have the band's data, just return it */ if (y < crdev->ymin || end_y > crdev->ymax) code = clist_get_band_from_thread(dev, band, NULL); if (code < 0) goto free_thread_out; mdata = crdev->data + crdev->page_tile_cache_size; if ((code = gdev_create_buf_device(cdev->buf_procs.create_buf_device, &bdev, cdev->target, y, NULL, mem, &(crdev->color_usage_array[band]))) < 0 || (code = crdev->buf_procs.setup_buf_device(bdev, mdata, raster, NULL, y - crdev->ymin, line_count, crdev->ymax - crdev->ymin)) < 0) goto free_thread_out; lines_rasterized = min(band_height, line_count); /* Return as much of the rectangle as falls within the rasterized lines. */ band_rect = *prect; band_rect.p.y = 0; band_rect.q.y = lines_rasterized; code = dev_proc(bdev, get_bits_rectangle) (bdev, &band_rect, params, unread); cdev->buf_procs.destroy_buf_device(bdev); if (code < 0) goto free_thread_out; /* Note that if called via 'get_bits', the line count will always be 1 */ if (lines_rasterized == line_count) { return code; } /***** TODO: Handle the below with data from the threads *****/ /* * We'll have to return the rectangle in pieces. Force GB_RETURN_COPY * rather than GB_RETURN_POINTER, and require all subsequent pieces to * use the same values as the first piece for all of the other format * options. If copying isn't allowed, or if there are any unread * rectangles, punt. */ if (!(options & GB_RETURN_COPY) || code > 0) return gx_default_get_bits_rectangle(dev, prect, params, unread); options = params->options; if (!(options & GB_RETURN_COPY)) { /* Redo the first piece with copying. */ params->options = options = (params->options & ~GB_RETURN_ALL) | GB_RETURN_COPY; lines_rasterized = 0; } { gs_get_bits_params_t band_params; uint raster = gx_device_raster(bdev, true); code = gdev_create_buf_device(cdev->buf_procs.create_buf_device, &bdev, cdev->target, y, NULL, mem, &(crdev->color_usage_array[band])); if (code < 0) return code; band_params = *params; while ((y += lines_rasterized) < end_y) { /* Increment data pointer by lines_rasterized. */ band_params.data[0] += raster * lines_rasterized; line_count = end_y - y; code = clist_rasterize_lines(dev, y, line_count, bdev, NULL, &my); if (code < 0) break; lines_rasterized = min(code, line_count); band_rect.p.y = my; band_rect.q.y = my + lines_rasterized; code = dev_proc(bdev, get_bits_rectangle) (bdev, &band_rect, &band_params, unread); if (code < 0) break; params->options = options = band_params.options; if (lines_rasterized == line_count) break; } cdev->buf_procs.destroy_buf_device(bdev); } return code; /* Free up thread stuff */ free_thread_out: clist_teardown_render_threads(dev); return code; } int clist_process_page(gx_device *dev, gx_process_page_options_t *options) { gx_device_clist *cldev = (gx_device_clist *)dev; gx_device_clist_reader *crdev = &cldev->reader; gx_device_clist_common *cdev = (gx_device_clist_common *)dev; int y; int line_count; int band_height = crdev->page_band_height; gs_int_rect band_rect; int lines_rasterized; gx_device *bdev; gx_render_plane_t render_plane; int my; int code; void *buffer = NULL; if (0 > (code = clist_close_writer_and_init_reader(cldev))) return code; if (options->init_buffer_fn) { code = options->init_buffer_fn(options->arg, dev, dev->memory, dev->width, band_height, &buffer); if (code < 0) return code; } render_plane.index = -1; for (y = 0; y < dev->height; y += lines_rasterized) { line_count = band_height; if (line_count > dev->height - y) line_count = dev->height - y; code = gdev_create_buf_device(cdev->buf_procs.create_buf_device, &bdev, cdev->target, y, &render_plane, dev->memory, &(crdev->color_usage_array[y/band_height])); if (code < 0) return code; code = clist_rasterize_lines(dev, y, line_count, bdev, &render_plane, &my); if (code >= 0) { lines_rasterized = min(code, line_count); /* Return as much of the rectangle as falls within the rasterized lines. */ band_rect.p.x = 0; band_rect.p.y = y; band_rect.q.x = dev->width; band_rect.q.y = y + lines_rasterized; if (options->process_fn) code = options->process_fn(options->arg, dev, bdev, &band_rect, buffer); } if (code >= 0 && options->output_fn) code = options->output_fn(options->arg, dev, buffer); cdev->buf_procs.destroy_buf_device(bdev); if (code < 0) break; } if (options->free_buffer_fn) { options->free_buffer_fn(options->arg, dev, dev->memory, buffer); } return code; } static int clist_process_page_mt(gx_device *dev, gx_process_page_options_t *options) { gx_device_printer *pdev = (gx_device_printer *)dev; gx_device_clist *cldev = (gx_device_clist *)dev; gx_device_clist_reader *crdev = &cldev->reader; int band_height = crdev->page_info.band_params.BandHeight; int band; int num_bands = (dev->height + band_height-1)/band_height; int code; int reverse = !!(options->options & GX_PROCPAGE_BOTTOM_UP); /* This page might not want multiple threads */ /* Also we don't support plane extraction using multiple threads */ if (pdev->num_render_threads_requested < 1) return clist_process_page(dev, options); if ((code = clist_close_writer_and_init_reader(cldev)) < 0) return code; /* can't recover from this */ /* Haven't done any rendering yet, try to set up the threads */ if (clist_setup_render_threads(dev, reverse ? dev->height-1 : 0, options) < 0) /* problem setting up the threads, revert to single threaded */ return clist_process_page(dev, options); if (reverse) { for (band = num_bands-1; band > 0; band--) { code = clist_get_band_from_thread(dev, band, options); if (code < 0) goto free_thread_out; } } else { for (band = 0; band < num_bands; band++) { code = clist_get_band_from_thread(dev, band, options); if (code < 0) goto free_thread_out; } } /* Always free up thread stuff before exiting*/ free_thread_out: clist_teardown_render_threads(dev); return code; } static void test_threads(void *dummy) { } int clist_enable_multi_thread_render(gx_device *dev) { int code = -1; gp_thread_id thread; if (dev->procs.get_bits_rectangle == clist_get_bits_rect_mt) return 1; /* no need to test again */ /* We need to test gp_thread_start since we may be on a platform */ /* built without working threads, i.e., using gp_nsync.c dummy */ /* routines. The nosync gp_thread_start returns a -ve error code. */ if ((code = gp_thread_start(test_threads, NULL, &thread)) < 0 ) { return code; /* Threads don't work */ } gp_thread_finish(thread); set_dev_proc(dev, get_bits_rectangle, clist_get_bits_rect_mt); set_dev_proc(dev, process_page, clist_process_page_mt); return 1; }