This is gnupg1.info, produced by makeinfo version 4.8 from gnupg1.texi. This is the `The GNU Privacy Guard Manual' (1.4.7, 4 December 2006). Copyright (C) 1998, 1999, 2000, 2001, 2002, 2004, 2005, 2006 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. The text of the license can be found in the section entitled "Copying". INFO-DIR-SECTION GNU Utilities START-INFO-DIR-ENTRY * gpg: (gpg). OpenPGP encryption and signing tool (v1). END-INFO-DIR-ENTRY  File: gnupg1.info, Node: Top, Next: Invoking GPG, Up: (dir) Using the GnuPG Version 1.4 *************************** This is the `The GNU Privacy Guard Manual' (1.4.7, 4 December 2006). Copyright (C) 1998, 1999, 2000, 2001, 2002, 2004, 2005, 2006 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. The text of the license can be found in the section entitled "Copying". This manual documents how to use the standalone version of GNU Privacy Guard. * Menu: * Invoking GPG:: Using the classic GPG protocol. * Specify a User ID:: How to Specify a User Id. * Copying:: GNU General Public License says how you can copy and share GnuPG * Option Index:: Index to command line options. * Index:: Index of concepts and symbol names.  File: gnupg1.info, Node: Invoking GPG, Next: Specify a User ID, Prev: Top, Up: Top 1 Invoking GPG ************** `gpg' is the OpenPGP part of the GNU Privacy Guard (GnuPG). It is a tool to provide digital encryption and signing services using the OpenPGP standard. `gpg' features complete key management and all bells and whistles you can expect from a decent OpenPGP implementation. This is the standalone version of `gpg'. For desktop use you should consider using `gpg2'. *Note Option Index::, for an index to `gpg''s commands and options. * Menu: * GPG Commands:: List of all commands. * GPG Options:: List of all options. * GPG Configuration:: Configuration files. * GPG Examples:: Some usage examples. Developer information:  File: gnupg1.info, Node: GPG Commands, Next: GPG Options, Up: Invoking GPG 1.1 Commands ============ Commands are not distinguished from options execpt for the fact that only one command is allowed. `gpg' may be run with no commands, in which case it will perform a reasonable action depending on the type of file it is given as input (an encrypted message is decrypted, a signature is verified, a file containing keys is listed). Please remember that option as well as command parsing stops as soon as a non-option is encountered, you can explicitly stop parsing by using the special option `--'. * Menu: * General GPG Commands:: Commands not specific to the functionality. * Operational GPG Commands:: Commands to select the type of operation. * OpenPGP Key Management:: How to manage your keys.  File: gnupg1.info, Node: General GPG Commands, Next: Operational GPG Commands, Up: GPG Commands 1.1.1 Commands not specific to the function ------------------------------------------- `--version' Print the program version and licensing information. Note that you cannot abbreviate this command. `--help' `-h' Print a usage message summarizing the most useful command line options. Not that you cannot abbreviate this command. `--warranty' Print warranty information. `--dump-options' Print a list of all available options and commands. Note that you cannot abbreviate this command.  File: gnupg1.info, Node: Operational GPG Commands, Next: OpenPGP Key Management, Prev: General GPG Commands, Up: GPG Commands 1.1.2 Commands to select the type of operation ---------------------------------------------- `--sign' `-s' Make a signature. This command may be combined with `--encrypt' (for a signed and encrypted message), `--symmetric' (for a signed and symmetrically encrypted message), or `--encrypt' and `--symmetric' together (for a signed message that may be decrypted via a secret key or a passphrase). `--clearsign' Make a clear text signature. The content in a clear text signature is readable without any special software. OpenPGP software is only needed to verify the signature. Clear text signatures may modify end-of-line whitespace for platform independence and are not intended to be reversible. `--detach-sign' `-b' Make a detached signature. `--encrypt' `-e' Encrypt data. This option may be combined with `--sign' (for a signed and encrypted message), `--symmetric' (for a message that may be decrypted via a secret key or a passphrase), or `--sign' and `--symmetric' together (for a signed message that may be decrypted via a secret key or a passphrase). `--symmetric' `-c' Encrypt with a symmetric cipher using a passphrase. The default symmetric cipher used is CAST5, but may be chosen with the `--cipher-algo' option. This option may be combined with `--sign' (for a signed and symmetrically encrypted message), `--encrypt' (for a message that may be decrypted via a secret key or a passphrase), or `--sign' and `--encrypt' together (for a signed message that may be decrypted via a secret key or a passphrase). `--store' Store only (make a simple RFC1991 literal data packet). `--decrypt' `-d' Decrypt the file given on the command line (or `stdin' if no file is specified) and write it to stdout (or the file specified with `--output'). If the decrypted file is signed, the signature is also verified. This command differs from the default operation, as it never writes to the filename which is included in the file and it rejects files which don't begin with an encrypted message. `--verify' Assume that the first argument is a signed file or a detached signature and verify it without generating any output. With no arguments, the signature packet is read from stdin. If only a sigfile is given, it may be a complete signature or a detached signature, in which case the signed stuff is expected in a file without the ".sig" or ".asc" extension. With more than 1 argument, the first should be a detached signature and the remaining files are the signed stuff. To read the signed stuff from stdin, use `-' as the second filename. For security reasons a detached signature cannot read the signed material from stdin without denoting it in the above way. `--multifile' This modifies certain other commands to accept multiple files for processing on the command line or read from stdin with each filename on a separate line. This allows for many files to be processed at once. `--multifile' may currently be used along with `--verify', `--encrypt', and `--decrypt'. Note that `--multifile --verify' may not be used with detached signatures. `--verify-files' Identical to `--multifile --verify'. `--encrypt-files' Identical to `--multifile --encrypt'. `--decrypt-files' Identical to `--multifile --decrypt'. `--list-keys' `-k' `--list-public-keys' List all keys from the public keyrings, or just the keys given on the command line. `-k' is slightly different from `--list-keys' in that it allows only for one argument and takes the second argument as the keyring to search. This is for command line compatibility with PGP 2 and has been removed in `gpg2'. Avoid using the output of this command in scripts or other programs as it is likely to change as GnuPG changes. See `--with-colons' for a machine-parseable key listing command that is appropriate for use in scripts and other programs. `--list-secret-keys' `-K' List all keys from the secret keyrings, or just the ones given on the command line. A `#' after the letters `sec' means that the secret key is not usable (for example, if it was created via `--export-secret-subkeys'). `--list-sigs' Same as `--list-keys', but the signatures are listed too. For each signature listed, there are several flags in between the "sig" tag and keyid. These flags give additional information about each signature. From left to right, they are the numbers 1-3 for certificate check level (see `--ask-cert-level'), "L" for a local or non-exportable signature (see `--lsign-key'), "R" for a nonRevocable signature (see the `--edit-key' command "nrsign"), "P" for a signature that contains a policy URL (see `--cert-policy-url'), "N" for a signature that contains a notation (see `--cert-notation'), "X" for an eXpired signature (see `--ask-cert-expire'), and the numbers 1-9 or "T" for 10 and above to indicate trust signature levels (see the `--edit-key' command "tsign"). `--check-sigs' Same as `--list-sigs', but the signatures are verified. `--fingerprint' List all keys (or the specified ones) along with their fingerprints. This is the same output as `--list-keys' but with the additional output of a line with the fingerprint. May also be combined with `--list-sigs' or `--check-sigs'. If this command is given twice, the fingerprints of all secondary keys are listed too. `--list-packets' List only the sequence of packets. This is mainly useful for debugging. `--card-edit' Present a menu to work with a smartcard. The subcommand "help" provides an overview on available commands. For a detailed description, please see the Card HOWTO at http://www.gnupg.org/documentation/howtos.html#GnuPG-cardHOWTO . `--card-status' Show the content of the smart card. `--change-pin' Present a menu to allow changing the PIN of a smartcard. This functionality is also available as the subcommand "passwd" with the `--card-edit' command. `--delete-key `name'' Remove key from the public keyring. In batch mode either `--yes' is required or the key must be specified by fingerprint. This is a safeguard against accidental deletion of multiple keys. `--delete-secret-key `name'' Remove key from the secret and public keyring. In batch mode the key must be specified by fingerprint. `--delete-secret-and-public-key `name'' Same as `--delete-key', but if a secret key exists, it will be removed first. In batch mode the key must be specified by fingerprint. `--export' Either export all keys from all keyrings (default keyrings and those registered via option `--keyring'), or if at least one name is given, those of the given name. The new keyring is written to stdout or to the file given with option `--output'. Use together with `--armor' to mail those keys. `--send-keys `key IDs'' Similar to `--export' but sends the keys to a keyserver. Fingerprints may be used instead of key IDs. Option `--keyserver' must be used to give the name of this keyserver. Don't send your complete keyring to a keyserver -- select only those keys which are new or changed by you. `--export-secret-keys' `--export-secret-subkeys' Same as `--export', but exports the secret keys instead. This is normally not very useful and a security risk. The second form of the command has the special property to render the secret part of the primary key useless; this is a GNU extension to OpenPGP and other implementations can not be expected to successfully import such a key. See the option `--simple-sk-checksum' if you want to import such an exported key with an older OpenPGP implementation. `--import' `--fast-import' Import/merge keys. This adds the given keys to the keyring. The fast version is currently just a synonym. There are a few other options which control how this command works. Most notable here is the `--keyserver-options merge-only' option which does not insert new keys but does only the merging of new signatures, user-IDs and subkeys. `--recv-keys `key IDs'' Import the keys with the given key IDs from a keyserver. Option `--keyserver' must be used to give the name of this keyserver. `--refresh-keys' Request updates from a keyserver for keys that already exist on the local keyring. This is useful for updating a key with the latest signatures, user IDs, etc. Calling this with no arguments will refresh the entire keyring. Option `--keyserver' must be used to give the name of the keyserver for all keys that do not have preferred keyservers set (see `--keyserver-options honor-keyserver-url'). `--search-keys `names'' Search the keyserver for the given names. Multiple names given here will be joined together to create the search string for the keyserver. Option `--keyserver' must be used to give the name of this keyserver. Keyservers that support different search methods allow using the syntax specified in "How to specify a user ID" below. Note that different keyserver types support different search methods. Currently only LDAP supports them all. `--fetch-keys `URIs'' Retrieve keys located at the specified URIs. Note that different installations of GnuPG may support different protocols (HTTP, FTP, LDAP, etc.) `--update-trustdb' Do trust database maintenance. This command iterates over all keys and builds the Web of Trust. This is an interactive command because it may have to ask for the "ownertrust" values for keys. The user has to give an estimation of how far she trusts the owner of the displayed key to correctly certify (sign) other keys. GnuPG only asks for the ownertrust value if it has not yet been assigned to a key. Using the `--edit-key' menu, the assigned value can be changed at any time. `--check-trustdb' Do trust database maintenance without user interaction. From time to time the trust database must be updated so that expired keys or signatures and the resulting changes in the Web of Trust can be tracked. Normally, GnuPG will calculate when this is required and do it automatically unless `--no-auto-check-trustdb' is set. This command can be used to force a trust database check at any time. The processing is identical to that of `--update-trustdb' but it skips keys with a not yet defined "ownertrust". For use with cron jobs, this command can be used together with `--batch' in which case the trust database check is done only if a check is needed. To force a run even in batch mode add the option `--yes'. `--export-ownertrust' Send the ownertrust values to stdout. This is useful for backup purposes as these values are the only ones which can't be re-created from a corrupted trust DB. `--import-ownertrust' Update the trustdb with the ownertrust values stored in `files' (or stdin if not given); existing values will be overwritten. `--rebuild-keydb-caches' When updating from version 1.0.6 to 1.0.7 this command should be used to create signature caches in the keyring. It might be handy in other situations too. `--print-md `algo'' `--print-mds' Print message digest of algorithm ALGO for all given files or stdin. With the second form (or a deprecated "*" as algo) digests for all available algorithms are printed. `--gen-random `0|1|2'' Emit COUNT random bytes of the given quality level. If count is not given or zero, an endless sequence of random bytes will be emitted. PLEASE, don't use this command unless you know what you are doing; it may remove precious entropy from the system! `--gen-prime `mode' `bits'' Use the source, Luke :-). The output format is still subject to change. `--enarmor' `--dearmor' Pack or unpack an arbitrary input into/from an OpenPGP ASCII armor. This is a GnuPG extension to OpenPGP and in general not very useful.  File: gnupg1.info, Node: OpenPGP Key Management, Prev: Operational GPG Commands, Up: GPG Commands 1.1.3 How to manage your keys ----------------------------- This section explains the main commands for key management `--gen-key' Generate a new key pair. This command is normally only used interactively. There is an experimental feature which allows you to create keys in batch mode. See the file `doc/DETAILS' in the source distribution on how to use this. `--gen-revoke `name'' Generate a revocation certificate for the complete key. To revoke a subkey or a signature, use the `--edit' command. `--desig-revoke `name'' Generate a designated revocation certificate for a key. This allows a user (with the permission of the keyholder) to revoke someone else's key. `--edit-key' Present a menu which enables you to do most of the key management related tasks. It expects the specification of a key on the command line. sign Make a signature on key of user `name' If the key is not yet signed by the default user (or the users given with -u), the program displays the information of the key again, together with its fingerprint and asks whether it should be signed. This question is repeated for all users specified with -u. lsign Same as "sign" but the signature is marked as non-exportable and will therefore never be used by others. This may be used to make keys valid only in the local environment. nrsign Same as "sign" but the signature is marked as non-revocable and can therefore never be revoked. tsign Make a trust signature. This is a signature that combines the notions of certification (like a regular signature), and trust (like the "trust" command). It is generally only useful in distinct communities or groups. Note that "l" (for local / non-exportable), "nr" (for non-revocable, and "t" (for trust) may be freely mixed and prefixed to "sign" to create a signature of any type desired. revsig Revoke a signature. For every signature which has been generated by one of the secret keys, GnuPG asks whether a revocation certificate should be generated. trust Change the owner trust value. This updates the trust-db immediately and no save is required. disable enable Disable or enable an entire key. A disabled key can not normally be used for encryption. adduid Create an alternate user id. addphoto Create a photographic user id. This will prompt for a JPEG file that will be embedded into the user ID. Note that a very large JPEG will make for a very large key. Also note that some programs will display your JPEG unchanged (GnuPG), and some programs will scale it to fit in a dialog box (PGP). deluid Delete a user id. Note that it is not possible to retract a user id, once it has been send to the public (i.e. to a keyserver). In that case you better use `revuid'. delsig Delete a signature. Note that it is not possible to retract a signature, once it has been send to the public (i.e. to a keyserver). In that case you better use `revsig'. revuid Revoke a user id. addkey Add a subkey to this key. addcardkey Generate a key on a card and add it to this key. keytocard Transfer the selected secret key (or the primary key if no key has been selected) to a smartcard. The secret key in the keyring will be replaced by a stub if the key could be stored successfully on the card and you use the save command later. Only certain key types may be transferred to the card. A sub menu allows you to select on what card to store the key. Note that it is not possible to get that key back from the card - if the card gets broken your secret key will be lost unless you have a backup somewhere. bkuptocard `file' Restore the given file to a card. This command may be used to restore a backup key (as generated during card initialization) to a new card. In almost all cases this will be the encryption key. You should use this command only with the corresponding public key and make sure that the file given as argument is indeed the backup to restore. You should then select 2 to restore as encryption key. You will first be asked to enter the passphrase of the backup key and then for the Admin PIN of the card. delkey Remove a subkey (secondart key). Note that it is not possible to retract a subkey, once it has been send to the public (i.e. to a keyserver). In that case you better use `revkey'. addrevoker Add a designated revoker. This takes one optional argument: "sensitive". If a designated revoker is marked as sensitive, it will not be exported by default (see export-options). revkey Revoke a subkey. expire Change the key expiration time. If a subkey is selected, the expiration time of this subkey will be changed. With no selection, the key expiration of the primary key is changed. passwd Change the passphrase of the secret key. primary Flag the current user id as the primary one, removes the primary user id flag from all other user ids and sets the timestamp of all affected self-signatures one second ahead. Note that setting a photo user ID as primary makes it primary over other photo user IDs, and setting a regular user ID as primary makes it primary over other regular user IDs. uid `n' Toggle selection of user id with index `n'. Use 0 to deselect all. key `n' Toggle selection of subkey with index `n'. Use 0 to deselect all. check Check all selected user ids. showphoto Display the selected photographic user id. pref List preferences from the selected user ID. This shows the actual preferences, without including any implied preferences. showpref More verbose preferences listing for the selected user ID. This shows the preferences in effect by including the implied preferences of 3DES (cipher), SHA-1 (digest), and Uncompressed (compression) if they are not already included in the preference list. In addition, the preferred keyserver and signature notations (if any) are shown. setpref `string' Set the list of user ID preferences to `string' for all (or just the selected) user IDs. Calling setpref with no arguments sets the preference list to the default (either built-in or set via `--default-preference-list'), and calling setpref with "none" as the argument sets an empty preference list. Use `gpg --version' to get a list of available algorithms. Note that while you can change the preferences on an attribute user ID (aka "photo ID"), GnuPG does not select keys via attribute user IDs so these preferences will not be used by GnuPG. keyserver Set a preferred keyserver for the specified user ID(s). This allows other users to know where you prefer they get your key from. See `--keyserver-options honor-keyserver-url' for more on how this works. Setting a value of "none" removes an existing preferred keyserver. notation Set a name=value notation for the specified user ID(s). See `--cert-notation' for more on how this works. Setting a value of "none" removes all notations, setting a notation prefixed with a minus sign (-) removes that notation, and setting a notation name (without the =value) prefixed with a minus sign removes all notations with that name. toggle Toggle between public and secret key listing. clean Compact (by removing all signatures except the selfsig) any user ID that is no longer usable (e.g. revoked, or expired). Then, remove any signatures that are not usable by the trust calculations. Specifically, this removes any signature that does not validate, any signature that is superseded by a later signature, revoked signatures, and signatures issued by keys that are not present on the keyring. minimize Make the key as small as possible. This removes all signatures from each user ID except for the most recent self-signature. cross-certify Add cross-certification signatures to signing subkeys that may not currently have them. Cross-certification signatures protect against a subtle attack against signing subkeys. See `--require-cross-certification'. save Save all changes to the key rings and quit. quit Quit the program without updating the key rings. The listing shows you the key with its secondary keys and all user ids. Selected keys or user ids are indicated by an asterisk. The trust value is displayed with the primary key: the first is the assigned owner trust and the second is the calculated trust value. Letters are used for the values: - No ownertrust assigned / not yet calculated. e Trust calculation has failed; probably due to an expired key. q Not enough information for calculation. n Never trust this key. m Marginally trusted. f Fully trusted. u Ultimately trusted. `--sign-key `name'' Signs a public key with your secret key. This is a shortcut version of the subcommand "sign" from `--edit'. `--lsign-key `name'' Signs a public key with your secret key but marks it as non-exportable. This is a shortcut version of the subcommand "lsign" from `--edit-key'.  File: gnupg1.info, Node: GPG Options, Next: GPG Configuration, Prev: GPG Commands, Up: Invoking GPG 1.2 Option Summary ================== `gpg' comes features a bunch of options to control the exact behaviour and to change the default configuration. * Menu: * GPG Configuration Options:: How to change the configuration. * GPG Key related Options:: Key related options. * GPG Input and Output:: Input and Output. * OpenPGP Options:: OpenPGP protocol specific options. * GPG Esoteric Options:: Doing things one usually don't want to do. Long options can be put in an options file (default "~/.gnupg/gpg.conf"). Short option names will not work - for example, "armor" is a valid option for the options file, while "a" is not. Do not write the 2 dashes, but simply the name of the option and any required arguments. Lines with a hash ('#') as the first non-white-space character are ignored. Commands may be put in this file too, but that is not generally useful as the command will execute automatically with every execution of gpg. Please remember that option parsing stops as soon as a non-option is encountered, you can explicitly stop parsing by using the special option `--'.  File: gnupg1.info, Node: GPG Configuration Options, Next: GPG Key related Options, Up: GPG Options 1.2.1 How to change the configuration ------------------------------------- These options are used to change the configuraton and are usually found in the option file. `--default-key NAME' Use NAME as the default key to sign with. If this option is not used, the default key is the first key found in the secret keyring. Note that `-u' or `--local-user' overrides this option. `--default-recipient NAME' Use NAME as default recipient if option `--recipient' is not used and don't ask if this is a valid one. NAME must be non-empty. `--default-recipient-self' Use the default key as default recipient if option `--recipient' is not used and don't ask if this is a valid one. The default key is the first one from the secret keyring or the one set with `--default-key'. `--no-default-recipient' Reset `--default-recipient' and `--default-recipient-self'. `-v, --verbose' Give more information during processing. If used twice, the input data is listed in detail. `--no-verbose' Reset verbose level to 0. `-q, --quiet' Try to be as quiet as possible. `--list-options `parameters'' This is a space or comma delimited string that gives options used when listing keys and signatures (that is, `--list-keys', `--list-sigs', `--list-public-keys', `--list-secret-keys', and the `--edit-key' functions). Options can be prepended with a `no-' (after the two dashes) to give the opposite meaning. The options are: show-photos Causes `--list-keys', `--list-sigs', `--list-public-keys', and `--list-secret-keys' to display any photo IDs attached to the key. Defaults to no. See also `--photo-viewer'. show-policy-urls Show policy URLs in the `--list-sigs' or `--check-sigs' listings. Defaults to no. show-notations show-std-notations show-user-notations Show all, IETF standard, or user-defined signature notations in the `--list-sigs' or `--check-sigs' listings. Defaults to no. show-keyserver-urls Show any preferred keyserver URL in the `--list-sigs' or `--check-sigs' listings. Defaults to no. show-uid-validity Display the calculated validity of user IDs during key listings. Defaults to no. show-unusable-uids Show revoked and expired user IDs in key listings. Defaults to no. show-unusable-subkeys Show revoked and expired subkeys in key listings. Defaults to no. show-keyring Display the keyring name at the head of key listings to show which keyring a given key resides on. Defaults to no. show-sig-expire Show signature expiration dates (if any) during `--list-sigs' or `--check-sigs' listings. Defaults to no. show-sig-subpackets Include signature subpackets in the key listing. This option can take an optional argument list of the subpackets to list. If no argument is passed, list all subpackets. Defaults to no. This option is only meaningful when using `--with-colons' along with `--list-sigs' or `--check-sigs'. `--verify-options `parameters'' This is a space or comma delimited string that gives options used when verifying signatures. Options can be prepended with a `no-' to give the opposite meaning. The options are: show-photos Display any photo IDs present on the key that issued the signature. Defaults to no. See also `--photo-viewer'. show-policy-urls Show policy URLs in the signature being verified. Defaults to no. show-notations show-std-notations show-user-notations Show all, IETF standard, or user-defined signature notations in the signature being verified. Defaults to IETF standard. show-keyserver-urls Show any preferred keyserver URL in the signature being verified. Defaults to no. show-uid-validity Display the calculated validity of the user IDs on the key that issued the signature. Defaults to no. show-unusable-uids Show revoked and expired user IDs during signature verification. Defaults to no. show-primary-uid-only Show only the primary user ID during signature verification. That is all the AKA lines as well as photo Ids are not shown with the signature verification status. pka-lookups Enable PKA lookups to verify sender addresses. Note that PKA is based on DNS, and so enabling this option may disclose information on when and what signatures are verified or to whom data is encrypted. This is similar to the "web bug" described for the auto-key-retrieve feature. pka-trust-increase Raise the trust in a signature to full if the signature passes PKA validation. This option is only meaningful if pka-lookups is set. `--enable-dsa2' `--disable-dsa2' Enables new-style DSA keys which (unlike the old style) may be larger than 1024 bit and use hashes other than SHA-1 and RIPEMD/160. Note that very few programs currently support these keys and signatures from them. `--photo-viewer `string'' This is the command line that should be run to view a photo ID. "%i" will be expanded to a filename containing the photo. "%I" does the same, except the file will not be deleted once the viewer exits. Other flags are "%k" for the key ID, "%K" for the long key ID, "%f" for the key fingerprint, "%t" for the extension of the image type (e.g. "jpg"), "%T" for the MIME type of the image (e.g. "image/jpeg"), and "%%" for an actual percent sign. If neither %i or %I are present, then the photo will be supplied to the viewer on standard input. The default viewer is "xloadimage -fork -quiet -title 'KeyID 0x%k' stdin". Note that if your image viewer program is not secure, then executing it from GnuPG does not make it secure. `--exec-path `string'' Sets a list of directories to search for photo viewers and keyserver helpers. If not provided, keyserver helpers use the compiled-in default directory, and photo viewers use the $PATH environment variable. Note, that on W32 system this value is ignored when searching for keyserver helpers. `--keyring `file'' Add `file' to the current list of keyrings. If `file' begins with a tilde and a slash, these are replaced by the $HOME directory. If the filename does not contain a slash, it is assumed to be in the GnuPG home directory ("~/.gnupg" if `--homedir' or $GNUPGHOME is not used). Note that this adds a keyring to the current list. If the intent is to use the specified keyring alone, use `--keyring' along with `--no-default-keyring'. `--secret-keyring `file'' Same as `--keyring' but for the secret keyrings. `--primary-keyring `file'' Designate `file' as the primary public keyring. This means that newly imported keys (via `--import' or keyserver `--recv-from') will go to this keyring. `--trustdb-name `file'' Use `file' instead of the default trustdb. If `file' begins with a tilde and a slash, these are replaced by the $HOME directory. If the filename does not contain a slash, it is assumed to be in the GnuPG home directory (`~/.gnupg' if `--homedir' or $GNUPGHOME is not used). `--homedir DIR' Set the name of the home directory to DIR. If his option is not used, the home directory defaults to `~/.gnupg'. It is only recognized when given on the command line. It also overrides any home directory stated through the environment variable `GNUPGHOME' or (on W32 systems) by means on the Registry entry HKCU\SOFTWARE\GNU\GNUPG:HOMEDIR. `--pcsc-driver `file'' Use `file' to access the smartcard reader. The current default is `libpcsclite.so.1' for GLIBC based systems, `/System/Library/Frameworks/PCSC.framework/PCSC' for MAC OS X, `winscard.dll' for Windows and `libpcsclite.so' for other systems. `--disable-ccid' Disable the integrated support for CCID compliant readers. This allows to fall back to one of the other drivers even if the internal CCID driver can handle the reader. Note, that CCID support is only available if libusb was available at build time. `--reader-port `number_or_string'' This option may be used to specify the port of the card terminal. A value of 0 refers to the first serial device; add 32768 to access USB devices. The default is 32768 (first USB device). PC/SC or CCID readers might need a string here; run the program in verbose mode to get a list of available readers. The default is then the first reader found. `--display-charset `name'' Set the name of the native character set. This is used to convert some informational strings like user IDs to the proper UTF-8 encoding. Note that this has nothing to do with the character set of data to be encrypted or signed; GnuPG does not recode user supplied data. If this option is not used, the default character set is determined from the current locale. A verbosity level of 3 shows the chosen set. Valid values for `name' are: iso-8859-1 This is the Latin 1 set. iso-8859-2 The Latin 2 set. iso-8859-15 This is currently an alias for the Latin 1 set. koi8-r The usual Russian set (rfc1489). utf-8 Bypass all translations and assume that the OS uses native UTF-8 encoding. `--utf8-strings' `--no-utf8-strings' Assume that command line arguments are given as UTF8 strings. The default (`--no-utf8-strings') is to assume that arguments are encoded in the character set as specified by `--display-charset'. These options affect all following arguments. Both options may be used multiple times. `--options `file'' Read options from `file' and do not try to read them from the default options file in the homedir (see `--homedir'). This option is ignored if used in an options file. `--no-options' Shortcut for `--options /dev/null'. This option is detected before an attempt to open an option file. Using this option will also prevent the creation of a `~/.gnupg' homedir. `-z `n'' `--compress-level `n'' `--bzip2-compress-level `n'' Set compression level to `n' for the ZIP and ZLIB compression algorithms. The default is to use the default compression level of zlib (normally 6). `--bzip2-compress-level' sets the compression level for the BZIP2 compression algorithm (defaulting to 6 as well). This is a different option from `--compress-level' since BZIP2 uses a significant amount of memory for each additional compression level. `-z' sets both. A value of 0 for `n' disables compression. `--bzip2-decompress-lowmem' Use a different decompression method for BZIP2 compressed files. This alternate method uses a bit more than half the memory, but also runs at half the speed. This is useful under extreme low memory circumstances when the file was originally compressed at a high `--bzip2-compress-level'. `--mangle-dos-filenames' `--no-mangle-dos-filenames' Older version of Windows cannot handle filenames with more than one dot. `--mangle-dos-filenames' causes GnuPG to replace (rather than add to) the extension of an output filename to avoid this problem. This option is off by default and has no effect on non-Windows platforms. `--ask-cert-level' `--no-ask-cert-level' When making a key signature, prompt for a certification level. If this option is not specified, the certification level used is set via `--default-cert-level'. See `--default-cert-level' for information on the specific levels and how they are used. `--no-ask-cert-level' disables this option. This option defaults to no. `--default-cert-level `n'' The default to use for the check level when signing a key. 0 means you make no particular claim as to how carefully you verified the key. 1 means you believe the key is owned by the person who claims to own it but you could not, or did not verify the key at all. This is useful for a "persona" verification, where you sign the key of a pseudonymous user. 2 means you did casual verification of the key. For example, this could mean that you verified that the key fingerprint and checked the user ID on the key against a photo ID. 3 means you did extensive verification of the key. For example, this could mean that you verified the key fingerprint with the owner of the key in person, and that you checked, by means of a hard to forge document with a photo ID (such as a passport) that the name of the key owner matches the name in the user ID on the key, and finally that you verified (by exchange of email) that the email address on the key belongs to the key owner. Note that the examples given above for levels 2 and 3 are just that: examples. In the end, it is up to you to decide just what "casual" and "extensive" mean to you. This option defaults to 0 (no particular claim). `--min-cert-level' When building the trust database, treat any signatures with a certification level below this as invalid. Defaults to 2, which disregards level 1 signatures. Note that level 0 "no particular claim" signatures are always accepted. `--trusted-key `long key ID'' Assume that the specified key (which must be given as a full 8 byte key ID) is as trustworthy as one of your own secret keys. This option is useful if you don't want to keep your secret keys (or one of them) online but still want to be able to check the validity of a given recipient's or signator's key. `--trust-model `pgp|classic|direct|always|auto'' Set what trust model GnuPG should follow. The models are: pgp This is the Web of Trust combined with trust signatures as used in PGP 5.x and later. This is the default trust model when creating a new trust database. classic This is the standard Web of Trust as used in PGP 2.x and earlier. direct Key validity is set directly by the user and not calculated via the Web of Trust. always Skip key validation and assume that used keys are always fully trusted. You generally won't use this unless you are using some external validation scheme. This option also suppresses the "[uncertain]" tag printed with signature checks when there is no evidence that the user ID is bound to the key. auto Select the trust model depending on whatever the internal trust database says. This is the default model if such a database already exists. `--auto-key-locate `parameters'' `--no-auto-key-locate' GnuPG can automatically locate and retrieve keys as needed using this option. This happens when encrypting to an email address (in the "user@example.com" form), and there are no user@example.com keys on the local keyring. This option takes any number of the following arguments, in the order they are to be tried: cert locate a key using DNS CERT, as specified in 2538bis (currently in draft): http://www.josefsson.org/rfc2538bis/ pka locate a key using DNS PKA. ldap locate a key using the PGP Universal method of checking "ldap://keys.(thedomain)". keyserver locate a key using whatever keyserver is defined using the `--keyserver' option. (keyserver URL) In addition, a keyserver URL as used in the `--keyserver' option may be used here to query that particular keyserver. `--keyid-format `short|0xshort|long|0xlong'' Select how to display key IDs. "short" is the traditional 8-character key ID. "long" is the more accurate (but less convenient) 16-character key ID. Add an "0x" to either to include an "0x" at the beginning of the key ID, as in 0x99242560. `--keyserver `name'' Use `name' as your keyserver. This is the server that `--recv-keys', `--send-keys', and `--search-keys' will communicate with to receive keys from, send keys to, and search for keys on. The format of the `name' is a URI: `scheme:[//]keyservername[:port]' The scheme is the type of keyserver: "hkp" for the HTTP (or compatible) keyservers, "ldap" for the LDAP keyservers, or "mailto" for the Graff email keyserver. Note that your particular installation of GnuPG may have other keyserver types available as well. Keyserver schemes are case-insensitive. After the keyserver name, optional keyserver configuration options may be provided. These are the same as the global `--keyserver-options' from below, but apply only to this particular keyserver. Most keyservers synchronize with each other, so there is generally no need to send keys to more than one server. The keyserver `hkp://subkeys.pgp.net' uses round robin DNS to give a different keyserver each time you use it. `--keyserver-options `name=value1 '' This is a space or comma delimited string that gives options for the keyserver. Options can be prepended with a `no-' to give the opposite meaning. Valid import-options or export-options may be used here as well to apply to importing (`--recv-key') or exporting (`--send-key') a key from a keyserver. While not all options are available for all keyserver types, some common options are: include-revoked When searching for a key with `--search-keys', include keys that are marked on the keyserver as revoked. Note that not all keyservers differentiate between revoked and unrevoked keys, and for such keyservers this option is meaningless. Note also that most keyservers do not have cryptographic verification of key revocations, and so turning this option off may result in skipping keys that are incorrectly marked as revoked. include-disabled When searching for a key with `--search-keys', include keys that are marked on the keyserver as disabled. Note that this option is not used with HKP keyservers. auto-key-retrieve This option enables the automatic retrieving of keys from a keyserver when verifying signatures made by keys that are not on the local keyring. Note that this option makes a "web bug" like behavior possible. Keyserver operators can see which keys you request, so by sending you a message signed by a brand new key (which you naturally will not have on your local keyring), the operator can tell both your IP address and the time when you verified the signature. honor-keyserver-url When using `--refresh-keys', if the key in question has a preferred keyserver URL, then use that preferred keyserver to refresh the key from. In addition, if auto-key-retrieve is set, and the signature being verified has a preferred keyserver URL, then use that preferred keyserver to fetch the key from. Defaults to yes. honor-pka-record If auto-key-retrieve is set, and the signature being verified has a PKA record, then use the PKA information to fetch the key. Defaults to yes. include-subkeys When receiving a key, include subkeys as potential targets. Note that this option is not used with HKP keyservers, as they do not support retrieving keys by subkey id. use-temp-files On most Unix-like platforms, GnuPG communicates with the keyserver helper program via pipes, which is the most efficient method. This option forces GnuPG to use temporary files to communicate. On some platforms (such as Win32 and RISC OS), this option is always enabled. keep-temp-files If using `use-temp-files', do not delete the temp files after using them. This option is useful to learn the keyserver communication protocol by reading the temporary files. verbose Tell the keyserver helper program to be more verbose. This option can be repeated multiple times to increase the verbosity level. timeout Tell the keyserver helper program how long (in seconds) to try and perform a keyserver action before giving up. Note that performing multiple actions at the same time uses this timeout value per action. For example, when retrieving multiple keys via `--recv-keys', the timeout applies separately to each key retrieval, and not to the `--recv-keys' command as a whole. Defaults to 30 seconds. http-proxy=`value' Set the proxy to use for HTTP and HKP keyservers. This overrides the "http_proxy" environment variable, if any. max-cert-size When retrieving a key via DNS CERT, only accept keys up to this size. Defaults to 16384 bytes. `--completes-needed `n'' Number of completely trusted users to introduce a new key signer (defaults to 1). `--marginals-needed `n'' Number of marginally trusted users to introduce a new key signer (defaults to 3) `--max-cert-depth `n'' Maximum depth of a certification chain (default is 5). `--simple-sk-checksum' Secret keys are integrity protected by using a SHA-1 checksum. This method is part of the upcoming enhanced OpenPGP specification but GnuPG already uses it as a countermeasure against certain attacks. Old applications don't understand this new format, so this option may be used to switch back to the old behaviour. Using this option bears a security risk. Note that using this option only takes effect when the secret key is encrypted - the simplest way to make this happen is to change the passphrase on the key (even changing it to the same value is acceptable). `--no-sig-cache' Do not cache the verification status of key signatures. Caching gives a much better performance in key listings. However, if you suspect that your public keyring is not save against write modifications, you can use this option to disable the caching. It probably does not make sense to disable it because all kind of damage can be done if someone else has write access to your public keyring. `--no-sig-create-check' GnuPG normally verifies each signature right after creation to protect against bugs and hardware malfunctions which could leak out bits from the secret key. This extra verification needs some time (about 115% for DSA keys), and so this option can be used to disable it. However, due to the fact that the signature creation needs manual interaction, this performance penalty does not matter in most settings. `--auto-check-trustdb' `--no-auto-check-trustdb' If GnuPG feels that its information about the Web of Trust has to be updated, it automatically runs the `--check-trustdb' command internally. This may be a time consuming process. `--no-auto-check-trustdb' disables this option. `--use-agent' `--no-use-agent' Try to use the GnuPG-Agent. With this option, GnuPG first tries to connect to the agent before it asks for a passphrase. `--no-use-agent' disables this option. `--gpg-agent-info' Override the value of the environment variable `GPG_AGENT_INFO'. This is only used when `--use-agent' has been given. Given that this option is not anymore used by `gpg2', it should be avoided if possible. `--lock-once' Lock the databases the first time a lock is requested and do not release the lock until the process terminates. `--lock-multiple' Release the locks every time a lock is no longer needed. Use this to override a previous `--lock-once' from a config file. `--lock-never' Disable locking entirely. This option should be used only in very special environments, where it can be assured that only one process is accessing those files. A bootable floppy with a stand-alone encryption system will probably use this. Improper usage of this option may lead to data and key corruption. `--exit-on-status-write-error' This option will cause write errors on the status FD to immediately terminate the process. That should in fact be the default but it never worked this way and thus we need an option to enable this, so that the change won't break applications which close their end of a status fd connected pipe too early. Using this option along with `--enable-progress-filter' may be used to cleanly cancel long running gpg operations. `--limit-card-insert-tries `n'' With `n' greater than 0 the number of prompts asking to insert a smartcard gets limited to N-1. Thus with a value of 1 gpg won't at all ask to insert a card if none has been inserted at startup. This option is useful in the configuration file in case an application does not know about the smartcard support and waits ad infinitum for an inserted card. `--no-random-seed-file' GnuPG uses a file to store its internal random pool over invocations. This makes random generation faster; however sometimes write operations are not desired. This option can be used to achieve that with the cost of slower random generation. `--no-greeting' Suppress the initial copyright message. `--no-secmem-warning' Suppress the warning about "using insecure memory". `--no-permission-warning' Suppress the warning about unsafe file and home directory (`--homedir') permissions. Note that the permission checks that GnuPG performs are not intended to be authoritative, but rather they simply warn about certain common permission problems. Do not assume that the lack of a warning means that your system is secure. Note that the warning for unsafe `--homedir' permissions cannot be suppressed in the gpg.conf file, as this would allow an attacker to place an unsafe gpg.conf file in place, and use this file to suppress warnings about itself. The `--homedir' permissions warning may only be suppressed on the command line. `--no-mdc-warning' Suppress the warning about missing MDC integrity protection. `--require-secmem' `--no-require-secmem' Refuse to run if GnuPG cannot get secure memory. Defaults to no (i.e. run, but give a warning). `--require-cross-certification' `--no-require-cross-certification' When verifying a signature made from a subkey, ensure that the cross certification "back signature" on the subkey is present and valid. This protects against a subtle attack against subkeys that can sign. Defaults to `--require-cross-certification' for `gpg'. `--expert' `--no-expert' Allow the user to do certain nonsensical or "silly" things like signing an expired or revoked key, or certain potentially incompatible things like generating unusual key types. This also disables certain warning messages about potentially incompatible actions. As the name implies, this option is for experts only. If you don't fully understand the implications of what it allows you to do, leave this off. `--no-expert' disables this option.  File: gnupg1.info, Node: GPG Key related Options, Next: GPG Input and Output, Prev: GPG Configuration Options, Up: GPG Options 1.2.2 Key related options ------------------------- `--recipient NAME' `-r' Encrypt for user id NAME. If this option or `--hidden-recipient' is not specified, GnuPG asks for the user-id unless `--default-recipient' is given. `--hidden-recipient NAME' `-R' Encrypt for user ID NAME, but hide the key ID of this user's key. This option helps to hide the receiver of the message and is a limited countermeasure against traffic analysis. If this option or `--recipient' is not specified, GnuPG asks for the user ID unless `--default-recipient' is given. `--encrypt-to `name'' Same as `--recipient' but this one is intended for use in the options file and may be used with your own user-id as an "encrypt-to-self". These keys are only used when there are other recipients given either by use of `--recipient' or by the asked user id. No trust checking is performed for these user ids and even disabled keys can be used. `--hidden-encrypt-to `name'' Same as `--hidden-recipient' but this one is intended for use in the options file and may be used with your own user-id as a hidden "encrypt-to-self". These keys are only used when there are other recipients given either by use of `--recipient' or by the asked user id. No trust checking is performed for these user ids and even disabled keys can be used. `--no-encrypt-to' Disable the use of all `--encrypt-to' and `--hidden-encrypt-to' keys. `--group `name=value1 '' Sets up a named group, which is similar to aliases in email programs. Any time the group name is a recipient (`-r' or `--recipient'), it will be expanded to the values specified. Multiple groups with the same name are automatically merged into a single group. The values are `key IDs' or fingerprints, but any key description is accepted. Note that a value with spaces in it will be treated as two different values. Note also there is only one level of expansion -- you cannot make an group that points to another group. When used from the command line, it may be necessary to quote the argument to this option to prevent the shell from treating it as multiple arguments. `--ungroup `name'' Remove a given entry from the `--group' list. `--no-groups' Remove all entries from the `--group' list. `--local-user NAME' `-u' Use NAME as the key to sign with. Note that this option overrides `--default-key'. `--try-all-secrets' Don't look at the key ID as stored in the message but try all secret keys in turn to find the right decryption key. This option forces the behaviour as used by anonymous recipients (created by using `--throw-keyids') and might come handy in case where an encrypted message contains a bogus key ID.  File: gnupg1.info, Node: GPG Input and Output, Next: OpenPGP Options, Prev: GPG Key related Options, Up: GPG Options 1.2.3 Input and Output ---------------------- `--armor' `-a' Create ASCII armored output. The default is to create the binary OpenPGP format. `--no-armor' Assume the input data is not in ASCII armored format. `--output FILE' `-o FILE' Write output to FILE. `--max-output `n'' This option sets a limit on the number of bytes that will be generated when processing a file. Since OpenPGP supports various levels of compression, it is possible that the plaintext of a given message may be significantly larger than the original OpenPGP message. While GnuPG works properly with such messages, there is often a desire to set a maximum file size that will be generated before processing is forced to stop by the OS limits. Defaults to 0, which means "no limit". `--import-options `parameters'' This is a space or comma delimited string that gives options for importing keys. Options can be prepended with a `no-' to give the opposite meaning. The options are: import-local-sigs Allow importing key signatures marked as "local". This is not generally useful unless a shared keyring scheme is being used. Defaults to no. repair-pks-subkey-bug During import, attempt to repair the damage caused by the PKS keyserver bug (pre version 0.9.6) that mangles keys with multiple subkeys. Note that this cannot completely repair the damaged key as some crucial data is removed by the keyserver, but it does at least give you back one subkey. Defaults to no for regular `--import' and to yes for keyserver `--recv-keys'. merge-only During import, allow key updates to existing keys, but do not allow any new keys to be imported. Defaults to no. import-clean After import, compact (remove all signatures except the self-signature) any user IDs from the new key that are not usable. Then, remove any signatures from the new key that are not usable. This includes signatures that were issued by keys that are not present on the keyring. This option is the same as running the `--edit-key' command "clean" after import. Defaults to no. import-minimal Import the smallest key possible. This removes all signatures except the most recent self-signature on each user ID. This option is the same as running the `--edit-key' command "minimize" after import. Defaults to no. `--export-options `parameters'' This is a space or comma delimited string that gives options for exporting keys. Options can be prepended with a `no-' to give the opposite meaning. The options are: export-local-sigs Allow exporting key signatures marked as "local". This is not generally useful unless a shared keyring scheme is being used. Defaults to no. export-attributes Include attribute user IDs (photo IDs) while exporting. This is useful to export keys if they are going to be used by an OpenPGP program that does not accept attribute user IDs. Defaults to yes. export-sensitive-revkeys Include designated revoker information that was marked as "sensitive". Defaults to no. export-reset-subkey-passwd When using the `--export-secret-subkeys' command, this option resets the passphrases for all exported subkeys to empty. This is useful when the exported subkey is to be used on an unattended machine where a passphrase doesn't necessarily make sense. Defaults to no. export-clean Compact (remove all signatures from) user IDs on the key being exported if the user IDs are not usable. Also, do not export any signatures that are not usable. This includes signatures that were issued by keys that are not present on the keyring. This option is the same as running the `--edit-key' command "clean" before export except that the local copy of the key is not modified. Defaults to no. export-minimal Export the smallest key possible. This removes all signatures except the most recent self-signature on each user ID. This option is the same as running the `--edit-key' command "minimize" before export except that the local copy of the key is not modified. Defaults to no. `--with-colons' Print key listings delimited by colons. Note that the output will be encoded in UTF-8 regardless of any `--display-charset' setting. This format is useful when GnuPG is called from scripts and other programs as it is easily machine parsed. The details of this format are documented in the file `doc/DETAILS', which is included in the GnuPG source distribution. `--fixed-list-mode' Do not merge primary user ID and primary key in `--with-colon' listing mode and print all timestamps as seconds since 1970-01-01. `--with-fingerprint' Same as the command `--fingerprint' but changes only the format of the output and may be used together with another command.  File: gnupg1.info, Node: OpenPGP Options, Next: GPG Esoteric Options, Prev: GPG Input and Output, Up: GPG Options 1.2.4 OpenPGP protocol specific options. ---------------------------------------- `-t, --textmode' `--no-textmode' Treat input files as text and store them in the OpenPGP canonical text form with standard "CRLF" line endings. This also sets the necessary flags to inform the recipient that the encrypted or signed data is text and may need its line endings converted back to whatever the local system uses. This option is useful when communicating between two platforms that have different line ending conventions (UNIX-like to Mac, Mac to Windows, etc). `--no-textmode' disables this option, and is the default. If `-t' (but not `--textmode') is used together with armoring and signing, this enables clearsigned messages. This kludge is needed for command-line compatibility with command-line versions of PGP; normally you would use `--sign' or `--clearsign' to select the type of the signature. `--force-v3-sigs' `--no-force-v3-sigs' OpenPGP states that an implementation should generate v4 signatures but PGP versions 5 through 7 only recognize v4 signatures on key material. This option forces v3 signatures for signatures on data. Note that this option overrides `--ask-sig-expire', as v3 signatures cannot have expiration dates. `--no-force-v3-sigs' disables this option. `--force-v4-certs' `--no-force-v4-certs' Always use v4 key signatures even on v3 keys. This option also changes the default hash algorithm for v3 RSA keys from MD5 to SHA-1. `--no-force-v4-certs' disables this option. `--force-mdc' Force the use of encryption with a modification detection code. This is always used with the newer ciphers (those with a blocksize greater than 64 bits), or if all of the recipient keys indicate MDC support in their feature flags. `--disable-mdc' Disable the use of the modification detection code. Note that by using this option, the encrypted message becomes vulnerable to a message modification attack. `--personal-cipher-preferences `string'' Set the list of personal cipher preferences to `string', this list should be a string similar to the one printed by the command "pref" in the edit menu. This allows the user to factor in their own preferred algorithms when algorithms are chosen via recipient key preferences. The most highly ranked cipher in this list is also used for the `--symmetric' encryption command. `--personal-digest-preferences `string'' Set the list of personal digest preferences to `string', this list should be a string similar to the one printed by the command "pref" in the edit menu. This allows the user to factor in their own preferred algorithms when algorithms are chosen via recipient key preferences. The most highly ranked digest algorithm in this list is algo used when signing without encryption (e.g. `--clearsign' or `--sign'). The default value is SHA-1. `--personal-compress-preferences `string'' Set the list of personal compression preferences to `string', this list should be a string similar to the one printed by the command "pref" in the edit menu. This allows the user to factor in their own preferred algorithms when algorithms are chosen via recipient key preferences. The most highly ranked algorithm in this list is also used when there are no recipient keys to consider (e.g. `--symmetric'). `--s2k-cipher-algo `name'' Use `name' as the cipher algorithm used to protect secret keys. The default cipher is CAST5. This cipher is also used for conventional encryption if `--personal-cipher-preferences' and `--cipher-algo' is not given. `--s2k-digest-algo `name'' Use `name' as the digest algorithm used to mangle the passphrases. The default algorithm is SHA-1. `--s2k-mode `n'' Selects how passphrases are mangled. If `n' is 0 a plain passphrase (which is not recommended) will be used, a 1 adds a salt to the passphrase and a 3 (the default) iterates the whole process a number of times (see -s2k-count). Unless `--rfc1991' is used, this mode is also used for conventional encryption. `--s2k-count `n'' Specify how many times the passphrase mangling is repeated. This value may range between 1024 and 65011712 inclusive, and the default is 65536. Note that not all values in the 1024-65011712 range are legal and if an illegal value is selected, GnuPG will round up to the nearest legal value. This option is only meaningful if `--s2k-mode' is 3. 1.2.5 Compliance options ------------------------ These options control what GnuPG is compliant to. Only one of these options may be active at a time. Note that the default setting of this is nearly always the correct one. See the INTEROPERABILITY WITH OTHER OPENPGP PROGRAMS section below before using one of these options. `--gnupg' Use standard GnuPG behavior. This is essentially OpenPGP behavior (see `--openpgp'), but with some additional workarounds for common compatibility problems in different versions of PGP. This is the default option, so it is not generally needed, but it may be useful to override a different compliance option in the gpg.conf file. `--openpgp' Reset all packet, cipher and digest options to strict OpenPGP behavior. Use this option to reset all previous options like `--rfc1991', `--force-v3-sigs', `--s2k-*', `--cipher-algo', `--digest-algo' and `--compress-algo' to OpenPGP compliant values. All PGP workarounds are disabled. `--rfc2440' Reset all packet, cipher and digest options to strict RFC-2440 behavior. Note that this is currently the same thing as `--openpgp'. `--rfc1991' Try to be more RFC-1991 (PGP 2.x) compliant. `--pgp2' Set up all options to be as PGP 2.x compliant as possible, and warn if an action is taken (e.g. encrypting to a non-RSA key) that will create a message that PGP 2.x will not be able to handle. Note that `PGP 2.x' here means `MIT PGP 2.6.2'. There are other versions of PGP 2.x available, but the MIT release is a good common baseline. This option implies `--rfc1991 --disable-mdc --no-force-v4-certs --no-sk-comment --escape-from-lines --force-v3-sigs --no-ask-sig-expire --no-ask-cert-expire --cipher-algo IDEA --digest-algo MD5 --compress-algo 1'. It also disables `--textmode' when encrypting. `--pgp6' Set up all options to be as PGP 6 compliant as possible. This restricts you to the ciphers IDEA (if the IDEA plugin is installed), 3DES, and CAST5, the hashes MD5, SHA1 and RIPEMD160, and the compression algorithms none and ZIP. This also disables -throw-keyids, and making signatures with signing subkeys as PGP 6 does not understand signatures made by signing subkeys. This option implies `--disable-mdc --no-sk-comment --escape-from-lines --force-v3-sigs --no-ask-sig-expire'. `--pgp7' Set up all options to be as PGP 7 compliant as possible. This is identical to `--pgp6' except that MDCs are not disabled, and the list of allowable ciphers is expanded to add AES128, AES192, AES256, and TWOFISH. `--pgp8' Set up all options to be as PGP 8 compliant as possible. PGP 8 is a lot closer to the OpenPGP standard than previous versions of PGP, so all this does is disable `--throw-keyids' and set `--escape-from-lines'. All algorithms are allowed except for the SHA224, SHA384, and SHA512 digests.  File: gnupg1.info, Node: GPG Esoteric Options, Prev: OpenPGP Options, Up: GPG Options 1.2.6 Doing things one usually doesn't want to do. -------------------------------------------------- `-n' `--dry-run' Don't make any changes (this is not completely implemented). `--list-only' Changes the behaviour of some commands. This is like `--dry-run' but different in some cases. The semantic of this command may be extended in the future. Currently it only skips the actual decryption pass and therefore enables a fast listing of the encryption keys. `-i' `--interactive' Prompt before overwriting any files. `--debug FLAGS' Set debugging flags. All flags are or-ed and FLAGS may be given in C syntax (e.g. 0x0042). `--debug-all' Set all useful debugging flags. `--debug-ccid-driver' Enable debug output from the included CCID driver for smartcards. Note that this option is only available on some system. `--enable-progress-filter' Enable certain PROGRESS status outputs. This option allows frontends to display a progress indicator while gpg is processing larger files. There is a slight performance overhead using it. `--status-fd `n'' Write special status strings to the file descriptor `n'. See the file DETAILS in the documentation for a listing of them. `--status-file `file'' Same as `--status-fd', except the status data is written to file `file'. `--logger-fd `n'' Write log output to file descriptor `n' and not to stderr. `--logger-file `file'' Same as `--logger-fd', except the logger data is written to file `file'. `--attribute-fd `n'' Write attribute subpackets to the file descriptor `n'. This is most useful for use with `--status-fd', since the status messages are needed to separate out the various subpackets from the stream delivered to the file descriptor. `--attribute-file `file'' Same as `--attribute-fd', except the attribute data is written to file `file'. `--comment `string'' `--no-comments' Use `string' as a comment string in clear text signatures and ASCII armored messages or keys (see `--armor'). The default behavior is not to use a comment string. `--comment' may be repeated multiple times to get multiple comment strings. `--no-comments' removes all comments. It is a good idea to keep the length of a single comment below 60 characters to avoid problems with mail programs wrapping such lines. Note that comment lines, like all other header lines, are not protected by the signature. `--emit-version' `--no-emit-version' Force inclusion of the version string in ASCII armored output. `--no-emit-version' disables this option. `--sig-notation `name=value'' `--cert-notation `name=value'' `-N, --set-notation `name=value'' Put the name value pair into the signature as notation data. `name' must consist only of printable characters or spaces, and must contain a '@' character in the form keyname@domain.example.com (substituting the appropriate keyname and domain name, of course). This is to help prevent pollution of the IETF reserved notation namespace. The `--expert' flag overrides the '@' check. `value' may be any printable string; it will be encoded in UTF8, so you should check that your `--display-charset' is set correctly. If you prefix `name' with an exclamation mark (!), the notation data will be flagged as critical (rfc2440:5.2.3.15). `--sig-notation' sets a notation for data signatures. `--cert-notation' sets a notation for key signatures (certifications). `--set-notation' sets both. There are special codes that may be used in notation names. "%k" will be expanded into the key ID of the key being signed, "%K" into the long key ID of the key being signed, "%f" into the fingerprint of the key being signed, "%s" into the key ID of the key making the signature, "%S" into the long key ID of the key making the signature, "%g" into the fingerprint of the key making the signature (which might be a subkey), "%p" into the fingerprint of the primary key of the key making the signature, "%c" into the signature count from the OpenPGP smartcard, and "%%" results in a single "%". %k, %K, and %f are only meaningful when making a key signature (certification), and %c is only meaningful when using the OpenPGP smartcard. `--sig-policy-url `string'' `--cert-policy-url `string'' `--set-policy-url `string'' Use `string' as a Policy URL for signatures (rfc2440:5.2.3.19). If you prefix it with an exclamation mark (!), the policy URL packet will be flagged as critical. `--sig-policy-url' sets a policy url for data signatures. `--cert-policy-url' sets a policy url for key signatures (certifications). `--set-policy-url' sets both. The same %-expandos used for notation data are available here as well. `--sig-keyserver-url `string'' Use `string' as a preferred keyserver URL for data signatures. If you prefix it with an exclamation mark (!), the keyserver URL packet will be flagged as critical. The same %-expandos used for notation data are available here as well. `--set-filename `string'' Use `string' as the filename which is stored inside messages. This overrides the default, which is to use the actual filename of the file being encrypted. `--for-your-eyes-only' `--no-for-your-eyes-only' Set the `for your eyes only' flag in the message. This causes GnuPG to refuse to save the file unless the `--output' option is given, and PGP to use the "secure viewer" with a Tempest-resistant font to display the message. This option overrides `--set-filename'. `--no-for-your-eyes-only' disables this option. `--use-embedded-filename' `--no-use-embedded-filename' Try to create a file with a name as embedded in the data. This can be a dangerous option as it allows to overwrite files. Defaults to no. `--cipher-algo `name'' Use `name' as cipher algorithm. Running the program with the command `--version' yields a list of supported algorithms. If this is not used the cipher algorithm is selected from the preferences stored with the key. In general, you do not want to use this option as it allows you to violate the OpenPGP standard. `--personal-cipher-preferences' is the safe way to accomplish the same thing. `--digest-algo `name'' Use `name' as the message digest algorithm. Running the program with the command `--version' yields a list of supported algorithms. In general, you do not want to use this option as it allows you to violate the OpenPGP standard. `--personal-digest-preferences' is the safe way to accomplish the same thing. `--compress-algo `name'' Use compression algorithm `name'. "zlib" is RFC-1950 ZLIB compression. "zip" is RFC-1951 ZIP compression which is used by PGP. "bzip2" is a more modern compression scheme that can compress some things better than zip or zlib, but at the cost of more memory used during compression and decompression. "uncompressed" or "none" disables compression. If this option is not used, the default behavior is to examine the recipient key preferences to see which algorithms the recipient supports. If all else fails, ZIP is used for maximum compatibility. ZLIB may give better compression results than ZIP, as the compression window size is not limited to 8k. BZIP2 may give even better compression results than that, but will use a significantly larger amount of memory while compressing and decompressing. This may be significant in low memory situations. Note, however, that PGP (all versions) only supports ZIP compression. Using any algorithm other than ZIP or "none" will make the message unreadable with PGP. In general, you do not want to use this option as it allows you to violate the OpenPGP standard. `--personal-compress-preferences' is the safe way to accomplish the same thing. `--cert-digest-algo `name'' Use `name' as the message digest algorithm used when signing a key. Running the program with the command `--version' yields a list of supported algorithms. Be aware that if you choose an algorithm that GnuPG supports but other OpenPGP implementations do not, then some users will not be able to use the key signatures you make, or quite possibly your entire key. `--disable-cipher-algo `name'' Never allow the use of `name' as cipher algorithm. The given name will not be checked so that a later loaded algorithm will still get disabled. `--disable-pubkey-algo `name'' Never allow the use of `name' as public key algorithm. The given name will not be checked so that a later loaded algorithm will still get disabled. `--throw-keyids' `--no-throw-keyids' Do not put the recipient key IDs into encrypted messages. This helps to hide the receivers of the message and is a limited countermeasure against traffic analysis. On the receiving side, it may slow down the decryption process because all available secret keys must be tried. `--no-throw-keyids' disables this option. This option is essentially the same as using `--hidden-recipient' for all recipients. `--not-dash-escaped' This option changes the behavior of cleartext signatures so that they can be used for patch files. You should not send such an armored file via email because all spaces and line endings are hashed too. You can not use this option for data which has 5 dashes at the beginning of a line, patch files don't have this. A special armor header line tells GnuPG about this cleartext signature option. `--escape-from-lines' `--no-escape-from-lines' Because some mailers change lines starting with "From " to ">From " it is good to handle such lines in a special way when creating cleartext signatures to prevent the mail system from breaking the signature. Note that all other PGP versions do it this way too. Enabled by default. `--no-escape-from-lines' disables this option. `--passphrase-repeat `n'' Specify how many times `gpg' will request a new passphrase be repeated. This is useful for helping memorize a passphrase. Defaults to 1 repetition. `--passphrase-fd `n'' Read the passphrase from file descriptor `n'. Only the first line will be read from file descriptor `n'. If you use 0 for `n', the passphrase will be read from stdin. This can only be used if only one passphrase is supplied. `--passphrase-file `file'' Read the passphrase from file `file'. Only the first line will be read from file `file'. This can only be used if only one passphrase is supplied. Obviously, a passphrase stored in a file is of questionable security if other users can read this file. Don't use this option if you can avoid it. `--passphrase `string'' Use `string' as the passphrase. This can only be used if only one passphrase is supplied. Obviously, this is of very questionable security on a multi-user system. Don't use this option if you can avoid it. `--command-fd `n'' This is a replacement for the deprecated shared-memory IPC mode. If this option is enabled, user input on questions is not expected from the TTY but from the given file descriptor. It should be used together with `--status-fd'. See the file doc/DETAILS in the source distribution for details on how to use it. `--command-file `file'' Same as `--command-fd', except the commands are read out of file `file' `--allow-non-selfsigned-uid' `--no-allow-non-selfsigned-uid' Allow the import and use of keys with user IDs which are not self-signed. This is not recommended, as a non self-signed user ID is trivial to forge. `--no-allow-non-selfsigned-uid' disables. `--allow-freeform-uid' Disable all checks on the form of the user ID while generating a new one. This option should only be used in very special environments as it does not ensure the de-facto standard format of user IDs. `--ignore-time-conflict' GnuPG normally checks that the timestamps associated with keys and signatures have plausible values. However, sometimes a signature seems to be older than the key due to clock problems. This option makes these checks just a warning. See also `--ignore-valid-from' for timestamp issues on subkeys. `--ignore-valid-from' GnuPG normally does not select and use subkeys created in the future. This option allows the use of such keys and thus exhibits the pre-1.0.7 behaviour. You should not use this option unless you there is some clock problem. See also `--ignore-time-conflict' for timestamp issues with signatures. `--ignore-crc-error' The ASCII armor used by OpenPGP is protected by a CRC checksum against transmission errors. Occasionally the CRC gets mangled somewhere on the transmission channel but the actual content (which is protected by the OpenPGP protocol anyway) is still okay. This option allows GnuPG to ignore CRC errors. `--ignore-mdc-error' This option changes a MDC integrity protection failure into a warning. This can be useful if a message is partially corrupt, but it is necessary to get as much data as possible out of the corrupt message. However, be aware that a MDC protection failure may also mean that the message was tampered with intentionally by an attacker. `--no-default-keyring' Do not add the default keyrings to the list of keyrings. Note that GnuPG will not operate without any keyrings, so if you use this option and do not provide alternate keyrings via `--keyring' or `--secret-keyring', then GnuPG will still use the default public or secret keyrings. `--skip-verify' Skip the signature verification step. This may be used to make the decryption faster if the signature verification is not needed. `--with-key-data' Print key listings delimited by colons (like `--with-colons') and print the public key data. `--fast-list-mode' Changes the output of the list commands to work faster; this is achieved by leaving some parts empty. Some applications don't need the user ID and the trust information given in the listings. By using this options they can get a faster listing. The exact behaviour of this option may change in future versions. If you are missing some information, don't use this option. `--no-literal' This is not for normal use. Use the source to see for what it might be useful. `--set-filesize' This is not for normal use. Use the source to see for what it might be useful. `--show-session-key' Display the session key used for one message. See `--override-session-key' for the counterpart of this option. We think that Key Escrow is a Bad Thing; however the user should have the freedom to decide whether to go to prison or to reveal the content of one specific message without compromising all messages ever encrypted for one secret key. DON'T USE IT UNLESS YOU ARE REALLY FORCED TO DO SO. `--override-session-key `string'' Don't use the public key but the session key `string'. The format of this string is the same as the one printed by `--show-session-key'. This option is normally not used but comes handy in case someone forces you to reveal the content of an encrypted message; using this option you can do this without handing out the secret key. `--ask-sig-expire' `--no-ask-sig-expire' When making a data signature, prompt for an expiration time. If this option is not specified, the expiration time set via `--default-sig-expire' is used. `--no-ask-sig-expire' disables this option. Note that by default, `--force-v3-sigs' is set which also disables this option. If you want signature expiration, you must set `--no-force-v3-sigs' as well as turning `--ask-sig-expire' on. `--default-sig-expire' The default expiration time to use for signature expiration. Valid values are "0" for no expiration, a number followed by the letter d (for days), w (for weeks), m (for months), or y (for years) (for example "2m" for two months, or "5y" for five years), or an absolute date in the form YYYY-MM-DD. Defaults to "0". `--ask-cert-expire' `--no-ask-cert-expire' When making a key signature, prompt for an expiration time. If this option is not specified, the expiration time set via `--default-cert-expire' is used. `--no-ask-cert-expire' disables this option. `--default-cert-expire' The default expiration time to use for key signature expiration. Valid values are "0" for no expiration, a number followed by the letter d (for days), w (for weeks), m (for months), or y (for years) (for example "2m" for two months, or "5y" for five years), or an absolute date in the form YYYY-MM-DD. Defaults to "0". `--allow-secret-key-import' This is an obsolete option and is not used anywhere. `--allow-multiple-messages' `--no-allow-multiple-messages' Allow processing of multiple OpenPGP messages contained in a single file or stream. Some programs that call GPG are not prepared to deal with multiple messages being processed together, so this option defaults to no. Note that versions of GPG prior to 1.4.7 always allowed multiple messages. `--enable-special-filenames' This options enables a mode in which filenames of the form `-&n', where n is a non-negative decimal number, refer to the file descriptor n and not to a file with that name. `--no-expensive-trust-checks' Experimental use only. `--preserve-permissions' Don't change the permissions of a secret keyring back to user read/write only. Use this option only if you really know what you are doing. `--default-preference-list `string'' Set the list of default preferences to `string'. This preference list is used for new keys and becomes the default for "setpref" in the edit menu. `--default-keyserver-url `name'' Set the default keyserver URL to `name'. This keyserver will be used as the keyserver URL when writing a new self-signature on a key, which includes key generation and changing preferences. `--list-config' Display various internal configuration parameters of GnuPG. This option is intended for external programs that call GnuPG to perform tasks, and is thus not generally useful. See the file `doc/DETAILS' in the source distribution for the details of which configuration items may be listed. `--list-config' is only usable with `--with-colons' set. `--gpgconf-list' This command is simliar to `--list-config' but in general only internally used by the `gpgconf' tool. `--gpgconf-test' This is more or less dummy action. However it parses the configuration file and returns with failure if the configuraion file would prevent `gpg' from startup. Thus it may be used to run a syntax check on the configuration file. 1.2.7 Deprecated options ------------------------ `--load-extension `name'' Load an extension module. If `name' does not contain a slash it is searched for in the directory configured when GnuPG was built (generally "/usr/local/lib/gnupg"). Extensions are not generally useful anymore, and the use of this option is deprecated. `--show-photos' `--no-show-photos' Causes `--list-keys', `--list-sigs', `--list-public-keys', `--list-secret-keys', and verifying a signature to also display the photo ID attached to the key, if any. See also `--photo-viewer'. These options are deprecated. Use `--list-options [no-]show-photos' and/or `--verify-options [no-]show-photos' instead. `--show-keyring' Display the keyring name at the head of key listings to show which keyring a given key resides on. This option is deprecated: use `--list-options [no-]show-keyring' instead. `--ctapi-driver `file'' Use `file' to access the smartcard reader. The current default is `libtowitoko.so'. Note that the use of this interface is deprecated; it may be removed in future releases. `--always-trust' Identical to `--trust-model always'. This option is deprecated. `--show-notation' `--no-show-notation' Show signature notations in the `--list-sigs' or `--check-sigs' listings as well as when verifying a signature with a notation in it. These options are deprecated. Use `--list-options [no-]show-notation' and/or `--verify-options [no-]show-notation' instead. `--show-policy-url' `--no-show-policy-url' Show policy URLs in the `--list-sigs' or `--check-sigs' listings as well as when verifying a signature with a policy URL in it. These options are deprecated. Use `--list-options [no-]show-policy-url' and/or `--verify-options [no-]show-policy-url' instead.  File: gnupg1.info, Node: GPG Configuration, Next: GPG Examples, Prev: GPG Options, Up: Invoking GPG 1.3 Configuration files ======================= There are a few configuration files to control certain aspects of `gpg''s operation. Unless noted, they are expected in the current home directory (*note option --homedir::). `gpg.conf' This is the standard configuration file read by `gpg' on startup. It may contain any valid long option; the leading two dashes may not be entered and the option may not be abbreviated. This default name may be changed on the command line (*note option --options::). Note that on larger installations, it is useful to put predefined files into the directory `/etc/skel/.gnupg/' so that newly created users start up with a working configuration. For internal purposes `gpg' creates and maintaines a few other files; They all live in in the current home directory (*note option --homedir::). Only the `gpg' may modify these files. `~/.gnupg/secring.gpg' The secret keyring. `~/.gnupg/secring.gpg.lock' and the lock file `~/.gnupg/pubring.gpg' The public keyring `~/.gnupg/pubring.gpg.lock' and the lock file `~/.gnupg/trustdb.gpg' The trust database `~/.gnupg/trustdb.gpg.lock' and the lock file `~/.gnupg/random_seed' used to preserve the internal random pool `/usr[/local]/share/gnupg/options.skel' Skeleton options file `/usr[/local]/lib/gnupg/' Default location for extensions Operation is further controlled by a few environment variables: HOME Used to locate the default home directory. GNUPGHOME If set directory used instead of "~/.gnupg". GPG_AGENT_INFO Used to locate the gpg-agent. This is only honored when `--use-agent' is set. The value consists of 3 colon delimited fields: The first is the path to the Unix Domain Socket, the second the PID of the gpg-agent and the protocol version which should be set to 1. When starting the gpg-agent as described in its documentation, this variable is set to the correct value. The option `--gpg-agent-info' can be used to override it. COLUMNS LINES Used to size some displays to the full size of the screen. LANGUAGE Apart from its use by GNU, it is used in the W32 version to override the language selection done through the Registry. If used and set to a a valid and available language name (LANGID), the file with the translation is loaded from `GPGDIR/gnupg.nls/LANGID.mo'. Here GPGDIR is the directory out of which the gpg binary has been laoded. If it can't be loaded the Registry is tried as a fallback.  File: gnupg1.info, Node: GPG Examples, Prev: GPG Configuration, Up: Invoking GPG 1.4 Examples ============ gpg -se -r `Bob' `file' sign and encrypt for user Bob gpg -clearsign `file' make a clear text signature gpg -sb `file' make a detached signature gpg -list-keys `user_ID' show keys gpg -fingerprint `user_ID' show fingerprint gpg -verify `pgpfile' gpg -verify `sigfile' Verify the signature of the file but do not output the data. The second form is used for detached signatures, where `sigfile' is the detached signature (either ASCII armored or binary) and are the signed data; if this is not given, the name of the file holding the signed data is constructed by cutting off the extension (".asc" or ".sig") of `sigfile' or by asking the user for the filename. RETURN VALUE ************ The program returns 0 if everything was fine, 1 if at least a signature was bad, and other error codes for fatal errors. WARNINGS ******** Use a *good* password for your user account and a *good* passphrase to protect your secret key. This passphrase is the weakest part of the whole system. Programs to do dictionary attacks on your secret keyring are very easy to write and so you should protect your "~/.gnupg/" directory very well. Keep in mind that, if this program is used over a network (telnet), it is *very* easy to spy out your passphrase! If you are going to verify detached signatures, make sure that the program knows about it; either give both filenames on the command line or use `-' to specify stdin. INTEROPERABILITY WITH OTHER OPENPGP PROGRAMS ******************************************** GnuPG tries to be a very flexible implementation of the OpenPGP standard. In particular, GnuPG implements many of the optional parts of the standard, such as the SHA-512 hash, and the ZLIB and BZIP2 compression algorithms. It is important to be aware that not all OpenPGP programs implement these optional algorithms and that by forcing their use via the `--cipher-algo', `--digest-algo', `--cert-digest-algo', or `--compress-algo' options in GnuPG, it is possible to create a perfectly valid OpenPGP message, but one that cannot be read by the intended recipient. There are dozens of variations of OpenPGP programs available, and each supports a slightly different subset of these optional algorithms. For example, until recently, no (unhacked) version of PGP supported the BLOWFISH cipher algorithm. A message using BLOWFISH simply could not be read by a PGP user. By default, GnuPG uses the standard OpenPGP preferences system that will always do the right thing and create messages that are usable by all recipients, regardless of which OpenPGP program they use. Only override this safe default if you really know what you are doing. If you absolutely must override the safe default, or if the preferences on a given key are invalid for some reason, you are far better off using the `--pgp6', `--pgp7', or `--pgp8' options. These options are safe as they do not force any particular algorithms in violation of OpenPGP, but rather reduce the available algorithms to a "PGP-safe" list. BUGS **** On many systems this program should be installed as setuid(root). This is necessary to lock memory pages. Locking memory pages prevents the operating system from writing memory pages (which may contain passphrases or other sensitive material) to disk. If you get no warning message about insecure memory your operating system supports locking without being root. The program drops root privileges as soon as locked memory is allocated. Note also that some systems (especially laptops) have the ability to "suspend to disk" (also known as "safe sleep" or "hibernate"). This writes all memory to disk before going into a low power or even powered off mode. Unless measures are taken in the operating system to protect the saved memory, passphrases or other sensitive material may be recoverable from it later.  File: gnupg1.info, Node: Specify a User ID, Next: Copying, Prev: Invoking GPG, Up: Top 2 How to Specify a User Id ************************** There are different ways to specify a user ID to GnuPG. Some of them are only valid for `gpg' others are only good for `gpgsm'. Here is the entire list of ways to specify a key: * By key Id. This format is deduced from the length of the string and its content or `0x' prefix. The key Id of an X.509 certificate are the low 64 bits of its SHA-1 fingerprint. The use of key Ids is just a shortcut, for all automated processing the fingerprint should be used. When using `gpg' an exclamation mark may be appended to force using the specified primary or secondary key and not to try and calculate which primary or secondary key to use. The last four lines of the example give the key ID in their long form as internally used by the OpenPGP protocol. You can see the long key ID using the option `--with-colons'. 234567C4 0F34E556E 01347A56A 0xAB123456 234AABBCC34567C4 0F323456784E56EAB 01AB3FED1347A5612 0x234AABBCC34567C4 * By fingerprint. This format is deduced from the length of the string and its content or the `0x' prefix. Note, that only the 20 byte version fingerprint is available with `gpgsm' (i.e. the SHA-1 hash of the certificate). When using `gpg' an exclamation mark may be appended to force using the specified primary or secondary key and not to try and calculate which primary or secondary key to use. The best way to specify a key Id is by using the fingerprint. This avoids any ambiguities in case that there are duplicated key IDs. 1234343434343434C434343434343434 123434343434343C3434343434343734349A3434 0E12343434343434343434EAB3484343434343434 0xE12343434343434343434EAB3484343434343434 (`gpgsm' also accepts colons between each pair of hexadecimal digits because this is the de-facto standard on how to present X.509 fingerprints.) * By exact match on OpenPGP user ID. This is denoted by a leading equal sign. It does not make sense for X.509 certificates. =Heinrich Heine * By exact match on an email address. This is indicated by enclosing the email address in the usual way with left and right angles. * By word match. All words must match exactly (not case sensitive) but can appear in any order in the user ID or a subjects name. Words are any sequences of letters, digits, the underscore and all characters with bit 7 set. +Heinrich Heine duesseldorf * By exact match on the subject's DN. This is indicated by a leading slash, directly followed by the RFC-2253 encoded DN of the subject. Note that you can't use the string printed by "gpgsm -list-keys" because that one as been reordered and modified for better readability; use -with-colons to print the raw (but standard escaped) RFC-2253 string /CN=Heinrich Heine,O=Poets,L=Paris,C=FR * By exact match on the issuer's DN. This is indicated by a leading hash mark, directly followed by a slash and then directly followed by the rfc2253 encoded DN of the issuer. This should return the Root cert of the issuer. See note above. #/CN=Root Cert,O=Poets,L=Paris,C=FR * By exact match on serial number and issuer's DN. This is indicated by a hash mark, followed by the hexadecmal representation of the serial number, the followed by a slash and the RFC-2253 encoded DN of the issuer. See note above. #4F03/CN=Root Cert,O=Poets,L=Paris,C=FR * By keygrip This is indicated by an ampersand followed by the 40 hex digits of a keygrip. `gpgsm' prints the keygrip when using the command `--dump-cert'. It does not yet work for OpenPGP keys. &D75F22C3F86E355877348498CDC92BD21010A480 * By substring match. This is the default mode but applications may want to explicitly indicate this by putting the asterisk in front. Match is not case sensitive. Heine *Heine Please note that we have reused the hash mark identifier which was used in old GnuPG versions to indicate the so called local-id. It is not anymore used and there should be no conflict when used with X.509 stuff. Using the RFC-2253 format of DNs has the drawback that it is not possible to map them back to the original encoding, however we don't have to do this because our key database stores this encoding as meta data.  File: gnupg1.info, Node: Copying, Next: Option Index, Prev: Specify a User ID, Up: Top Appendix A GNU GENERAL PUBLIC LICENSE ************************************* Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. A.0.1 Preamble -------------- The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 1. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 2. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 3. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a. You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b. You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c. If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 4. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a. Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b. Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c. Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 5. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 6. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 7. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 8. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 9. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 10. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 11. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 12. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 13. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs ============================================= If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. ONE LINE TO GIVE THE PROGRAM'S NAME AND AN IDEA OF WHAT IT DOES. Copyright (C) 19YY NAME OF AUTHOR This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) 19YY NAME OF AUTHOR Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. SIGNATURE OF TY COON, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License.  File: gnupg1.info, Node: Option Index, Next: Index, Prev: Copying, Up: Top Option Index ************ [index] * Menu: * --enarmor: Operational GPG Commands. (line 283) * armor: GPG Input and Output. (line 8) * card-edit: Operational GPG Commands. (line 137) * card-status: Operational GPG Commands. (line 143) * change-pin: Operational GPG Commands. (line 146) * check-sigs: Operational GPG Commands. (line 123) * check-trustdb: Operational GPG Commands. (line 236) * clearsign: Operational GPG Commands. (line 15) * debug: GPG Esoteric Options. (line 22) * decrypt: Operational GPG Commands. (line 48) * decrypt-files: Operational GPG Commands. (line 83) * default-key: GPG Configuration Options. (line 10) * default-keyserver-url: GPG Esoteric Options. (line 419) * default-preference-list: GPG Esoteric Options. (line 414) * default-recipient: GPG Configuration Options. (line 15) * default-recipient-self: GPG Configuration Options. (line 19) * delete-key: Operational GPG Commands. (line 151) * delete-secret-and-public-key: Operational GPG Commands. (line 160) * delete-secret-key: Operational GPG Commands. (line 156) * desig-revoke: OpenPGP Key Management. (line 21) * detach-sign: Operational GPG Commands. (line 23) * dry-run: GPG Esoteric Options. (line 8) * dump-options: General GPG Commands. (line 19) * edit-key: OpenPGP Key Management. (line 26) * enarmor: Operational GPG Commands. (line 283) * encrypt: Operational GPG Commands. (line 27) * encrypt-files: Operational GPG Commands. (line 80) * export: Operational GPG Commands. (line 165) * export-ownertrust: Operational GPG Commands. (line 251) * export-secret-keys: Operational GPG Commands. (line 180) * export-secret-subkeys: Operational GPG Commands. (line 180) * fetch-keys: Operational GPG Commands. (line 221) * fingerprint: Operational GPG Commands. (line 126) * fixed-list-mode: GPG Input and Output. (line 117) * gen-key: OpenPGP Key Management. (line 9) * gen-prime: Operational GPG Commands. (line 277) * gen-random: Operational GPG Commands. (line 271) * gen-revoke: OpenPGP Key Management. (line 17) * gnupg: OpenPGP Options. (line 110) * gpgconf-list: GPG Esoteric Options. (line 432) * gpgconf-test: GPG Esoteric Options. (line 436) * help: General GPG Commands. (line 12) * hidden-recipient: GPG Key related Options. (line 14) * homedir: GPG Configuration Options. (line 196) * import: Operational GPG Commands. (line 190) * import-ownertrust: Operational GPG Commands. (line 256) * interactive: GPG Esoteric Options. (line 19) * keyedit:addcardkey: OpenPGP Key Management. (line 97) * keyedit:addkey: OpenPGP Key Management. (line 94) * keyedit:addphoto: OpenPGP Key Management. (line 74) * keyedit:addrevoker: OpenPGP Key Management. (line 127) * keyedit:adduid: OpenPGP Key Management. (line 71) * keyedit:bkuptocard: OpenPGP Key Management. (line 111) * keyedit:check: OpenPGP Key Management. (line 159) * keyedit:clean: OpenPGP Key Management. (line 207) * keyedit:cross-certify: OpenPGP Key Management. (line 221) * keyedit:delkey: OpenPGP Key Management. (line 122) * keyedit:delsig: OpenPGP Key Management. (line 86) * keyedit:deluid: OpenPGP Key Management. (line 81) * keyedit:disable: OpenPGP Key Management. (line 67) * keyedit:enable: OpenPGP Key Management. (line 67) * keyedit:expire: OpenPGP Key Management. (line 135) * keyedit:key: OpenPGP Key Management. (line 155) * keyedit:keyserver: OpenPGP Key Management. (line 189) * keyedit:keytocard: OpenPGP Key Management. (line 100) * keyedit:lsign: OpenPGP Key Management. (line 38) * keyedit:minimize: OpenPGP Key Management. (line 216) * keyedit:notation: OpenPGP Key Management. (line 196) * keyedit:nrsign: OpenPGP Key Management. (line 43) * keyedit:passwd: OpenPGP Key Management. (line 140) * keyedit:pref: OpenPGP Key Management. (line 165) * keyedit:primary: OpenPGP Key Management. (line 143) * keyedit:quit: OpenPGP Key Management. (line 230) * keyedit:revkey: OpenPGP Key Management. (line 132) * keyedit:revsig: OpenPGP Key Management. (line 57) * keyedit:revuid: OpenPGP Key Management. (line 91) * keyedit:save: OpenPGP Key Management. (line 227) * keyedit:setpref: OpenPGP Key Management. (line 177) * keyedit:showphoto: OpenPGP Key Management. (line 162) * keyedit:showpref: OpenPGP Key Management. (line 169) * keyedit:sign: OpenPGP Key Management. (line 31) * keyedit:toggle: OpenPGP Key Management. (line 204) * keyedit:trust: OpenPGP Key Management. (line 62) * keyedit:tsign: OpenPGP Key Management. (line 47) * keyedit:uid: OpenPGP Key Management. (line 151) * list-config: GPG Esoteric Options. (line 424) * list-keys: Operational GPG Commands. (line 88) * list-options: GPG Configuration Options. (line 38) * list-options:show-notations: GPG Configuration Options. (line 57) * list-options:show-photos: GPG Configuration Options. (line 46) * list-options:show-policy-urls: GPG Configuration Options. (line 51) * list-options:show-std-notations: GPG Configuration Options. (line 57) * list-options:show-user-notations: GPG Configuration Options. (line 57) * list-packets: Operational GPG Commands. (line 133) * list-secret-keys: Operational GPG Commands. (line 101) * list-sigs: Operational GPG Commands. (line 107) * local-user: GPG Key related Options. (line 63) * lsign-key: OpenPGP Key Management. (line 265) * mangle-dos-filenames: GPG Configuration Options. (line 287) * max-output: GPG Input and Output. (line 19) * multifile: Operational GPG Commands. (line 69) * no-default-recipient: GPG Configuration Options. (line 25) * no-mangle-dos-filenames: GPG Configuration Options. (line 287) * no-verbose: GPG Configuration Options. (line 32) * openpgp: OpenPGP Options. (line 118) * output: GPG Input and Output. (line 16) * pgp2: OpenPGP Options. (line 133) * pgp6: OpenPGP Options. (line 147) * pgp7: OpenPGP Options. (line 158) * pgp8: OpenPGP Options. (line 164) * print-md: Operational GPG Commands. (line 266) * quiet: GPG Configuration Options. (line 35) * rebuild-keydb-caches: Operational GPG Commands. (line 260) * recipient: GPG Key related Options. (line 8) * recv-keys: Operational GPG Commands. (line 199) * refresh-keys: Operational GPG Commands. (line 203) * rfc1991: OpenPGP Options. (line 130) * rfc2440: OpenPGP Options. (line 125) * search-keys: Operational GPG Commands. (line 212) * send-keys: Operational GPG Commands. (line 172) * sign: Operational GPG Commands. (line 8) * sign-key: OpenPGP Key Management. (line 261) * store: Operational GPG Commands. (line 44) * symmetric: Operational GPG Commands. (line 35) * update-trustdb: Operational GPG Commands. (line 226) * verbose: GPG Configuration Options. (line 28) * verify: Operational GPG Commands. (line 56) * verify-files: Operational GPG Commands. (line 77) * version: General GPG Commands. (line 7) * warranty: General GPG Commands. (line 16) * with-colons: GPG Input and Output. (line 109) * with-fingerprint: GPG Input and Output. (line 121)  File: gnupg1.info, Node: Index, Prev: Option Index, Up: Top Index ***** [index] * Menu: * command options: Invoking GPG. (line 6) * GPG command options: Invoking GPG. (line 6) * gpgsm.conf: GPG Configuration. (line 11) * GPL, GNU General Public License: Copying. (line 6) * options, GPG command: Invoking GPG. (line 6)  Tag Table: Node: Top717 Node: Invoking GPG1760 Node: GPG Commands2536 Node: General GPG Commands3367 Node: Operational GPG Commands3998 Node: OpenPGP Key Management16542 Node: GPG Options26994 Node: GPG Configuration Options28224 Ref: option --homedir35925 Ref: option --options38475 Node: GPG Key related Options56398 Node: GPG Input and Output59397 Node: OpenPGP Options64806 Node: GPG Esoteric Options72596 Node: GPG Configuration94025 Node: GPG Examples96717 Node: Specify a User ID100727 Ref: how-to-specify-a-user-id100876 Node: Copying105497 Node: Option Index124711 Node: Index142639  End Tag Table