/*****************************************************************************\ hp.c - hp cups backend (c) 2004-2008 Copyright HP Development Company, LP Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. \*****************************************************************************/ #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_DBUS #include #endif #include "hpmud.h" #include #include #include //#define HP_DEBUG enum BACKEND_RESULT { BACKEND_OK = 0, BACKEND_FAILED = 1, /* use error-policy */ BACKEND_HOLD = 3, /* hold job */ BACKEND_STOP = 4, /* stop queue */ BACKEND_CANCEL = 5 /* cancel job */ }; struct pjl_attributes { int pjl_device; /* 0=disabled, 1=enabled */ int current_status; int eoj_pages; /* end-of-job pages */ int abort; /* 0=no, 1=yes */ int done; /* 0=no, 1=yes */ HPMUD_DEVICE dd; HPMUD_CHANNEL cd; pthread_t tid; pthread_mutex_t mutex; pthread_cond_t done_cond; }; #define _STRINGIZE(x) #x #define STRINGIZE(x) _STRINGIZE(x) #define BUG(args...) bug(__FILE__ " " STRINGIZE(__LINE__) ": " args) #ifdef HP_DEBUG #define DBG(args...) syslog(LOG_INFO, __FILE__ " " STRINGIZE(__LINE__) ": " args) #define DBG_DUMP(data, size) sysdump((data), (size)) #define DBG_SZ(args...) syslog(LOG_INFO, args) #else #define DBG(args...) #define DBG_DUMP(data, size) #define DBG_SZ(args...) #endif #define RETRY_TIMEOUT 30 /* seconds */ #define EXCEPTION_TIMEOUT 45 /* seconds */ #define NFAULT_BIT 0x08 #define PERROR_BIT 0x20 #define OOP (NFAULT_BIT | PERROR_BIT) #define JAMMED (PERROR_BIT) #define ERROR_TRAP (0) #define STATUS_MASK (NFAULT_BIT | PERROR_BIT) #define DEVICE_IS_OOP(reg) ((reg & STATUS_MASK) == OOP) #define DEVICE_PAPER_JAMMED(reg) ((reg & STATUS_MASK) == JAMMED) #define DEVICE_IO_TRAP(reg) ((reg & STATUS_MASK) == ERROR_TRAP) #define HEX2INT(x, i) if (x >= '0' && x <= '9') i |= x - '0'; \ else if (x >= 'A' && x <= 'F') i |= 0xA + x - 'A'; \ else if (x >= 'a' && x <= 'f') i |= 0xA + x - 'a' /* Definitions for hpLogLevel in cupsd.conf. */ #define BASIC_LOG 1 #define SAVE_OUT_FILE 2 #define SAVE_INPUT_RASTERS 4 #define SAVE_OUT_FILE_IN_BACKEND 8 #define DONT_SEND_TO_BACKEND 16 #define DONT_SEND_TO_PRINTER 32 /* Actual vstatus codes are mapped to 1000+vstatus for DeviceError messages. */ typedef enum { VSTATUS_IDLE = 1000, VSTATUS_BUSY, VSTATUS_PRNT, /* io printing */ VSTATUS_OFFF, /* turning off */ VSTATUS_RPRT, /* report printing */ VSTATUS_CNCL, /* canceling */ VSTATUS_IOST, /* io stall */ VSTATUS_DRYW, /* dry time wait */ VSTATUS_PENC, /* pen change */ VSTATUS_OOPA, /* out of paper */ VSTATUS_BNEJ, /* banner eject needed */ VSTATUS_BNMZ, /* banner mismatch */ VSTATUS_PHMZ, /* photo mismatch */ VSTATUS_DPMZ, /* duplex mismatch */ VSTATUS_PAJM, /* media jam */ VSTATUS_CARS, /* carriage stall */ VSTATUS_PAPS, /* paper stall */ VSTATUS_PENF, /* pen failure */ VSTATUS_ERRO, /* hard error */ VSTATUS_PWDN, /* power down */ VSTATUS_FPTS, /* front panel test */ VSTATUS_CLNO /* clean out tray missing */ } VSTATUS; #define EVENT_START_JOB 500 #define EVENT_END_JOB 501 //const char pjl_status_cmd[] = "\e%-12345X@PJL INFO STATUS \r\n\e%-12345X"; static const char pjl_ustatus_cmd[] = "\e%-12345X@PJL USTATUS DEVICE = ON \r\n@PJL USTATUS JOB = ON \r\n@PJL JOB \r\n\e%-12345X"; static const char pjl_job_end_cmd[] = "\e%-12345X@PJL EOJ \r\n\e%-12345X"; static const char pjl_ustatus_off_cmd[] = "\e%-12345X@PJL USTATUSOFF \r\n\e%-12345X"; #ifdef HAVE_DBUS #define DBUS_INTERFACE "com.hplip.StatusService" #define DBUS_PATH "/" static DBusError dbus_err; static DBusConnection *dbus_conn; #endif static int bug(const char *fmt, ...) { char buf[256]; va_list args; int n; va_start(args, fmt); if ((n = vsnprintf(buf, 256, fmt, args)) == -1) buf[255] = 0; /* output was truncated */ fprintf(stderr, "%s", buf); syslog(LOG_ERR, "%s", buf); fflush(stderr); va_end(args); return n; } #ifdef HP_DEBUG static void sysdump(const void *data, int size) { /* Dump size bytes of *data. Output looks like: * [0000] 75 6E 6B 6E 6F 77 6E 20 30 FF 00 00 00 00 39 00 unknown 0.....9. */ unsigned char *p = (unsigned char *)data; unsigned char c; int n; char bytestr[4] = {0}; char addrstr[10] = {0}; char hexstr[16*3 + 5] = {0}; char charstr[16*1 + 5] = {0}; for(n=1;n<=size;n++) { if (n%16 == 1) { /* store address for this line */ snprintf(addrstr, sizeof(addrstr), "%.4d", (int)((p-(unsigned char *)data) & 0xffff)); } c = *p; if (isprint(c) == 0) { c = '.'; } /* store hex str (for left side) */ snprintf(bytestr, sizeof(bytestr), "%02X ", *p); strncat(hexstr, bytestr, sizeof(hexstr)-strlen(hexstr)-1); /* store char str (for right side) */ snprintf(bytestr, sizeof(bytestr), "%c", c); strncat(charstr, bytestr, sizeof(charstr)-strlen(charstr)-1); if(n%16 == 0) { /* line completed */ DBG_SZ("[%4.4s] %-50.50s %s\n", addrstr, hexstr, charstr); hexstr[0] = 0; charstr[0] = 0; } p++; /* next byte */ } if (strlen(hexstr) > 0) { /* print rest of buffer if not empty */ DBG_SZ("[%4.4s] %-50.50s %s\n", addrstr, hexstr, charstr); } } #endif /* Map printer status to IPP printer-state-reasons (see RFC-2911). */ static int map_ipp_printer_state_reason(int status, const char **state_msg) { if (status >= 1000 && status <= 1999) { /* inkjet vstatus */ switch (status) { case VSTATUS_IDLE: case VSTATUS_PRNT: *state_msg = "none"; break; case VSTATUS_OOPA: *state_msg = "media-empty-error"; break; case(VSTATUS_PAJM): *state_msg = "media-jam-error"; break; default: *state_msg = "other"; break; } } else if (status >= 10000 && status <= 55999) { /* laserjet pjl status */ if (status >= 10000 && status <= 10999) *state_msg = "none"; else if (status >= 41000 && status <= 41999) *state_msg = "media-empty-error"; else if ((status >= 42000 && status <= 42999) || (status >= 44000 && status <= 44999) || (status == 40022)) *state_msg = "media-jam-error"; else if (status == 40021) *state_msg = "cover-open-error"; else if (status == 40600) *state_msg = "toner-empty-error"; else *state_msg = "other"; /* 40017 - cartridge E-LABEL is unreadable (ie: ljp1005) */ } else { /* Assume hpmud error */ *state_msg = "other"; } return 0; } static enum HPMUD_RESULT get_pjl_input(HPMUD_DEVICE dd, HPMUD_CHANNEL cd, char *buf, int buf_size, int sec_timeout, int *bytes_read) { enum HPMUD_RESULT stat; int len; *bytes_read = 0; /* Read unsolicited status from device. */ stat = hpmud_read_channel(dd, cd, buf, buf_size, sec_timeout, &len); if (stat != HPMUD_R_OK) goto bugout; buf[len]=0; DBG("pjl result len=%d\n", len); DBG_DUMP(buf, len); *bytes_read = len; stat = HPMUD_R_OK; bugout: return stat; } static int parse_pjl_job_end(char *buf, int *pages) { char *p, *tail; int stat=0; if (buf[0] == 0) goto bugout; if ((p = strcasestr(buf, "ustatus job")) != NULL) { if (strncasecmp(p+13, "end", 3) == 0) { stat = 1; if ((p = strcasestr(p+13+5, "pages=")) != NULL) *pages = strtol(p+6, &tail, 10); } } bugout: return stat; } static int parse_pjl_device_status(char *buf, int *status) { char *p, *tail; int stat=0; if (buf[0] == 0) goto bugout; if ((p = strcasestr(buf, "code=")) != NULL) { *status = strtol(p+5, &tail, 10); stat = 1; } bugout: return stat; } static void pjl_read_thread(struct pjl_attributes *pa) { enum HPMUD_RESULT stat; int len, new_status, new_eoj; char buf[1024]; pthread_detach(pthread_self()); DBG("starting thread %d\n", (int)pa->tid); pa->current_status = 10001; /* default is ready */ pa->eoj_pages = pa->abort = pa->done = 0; while (!pa->abort) { stat = get_pjl_input(pa->dd, pa->cd, buf, sizeof(buf), 0, &len); if (!(stat == HPMUD_R_OK || stat == HPMUD_R_IO_TIMEOUT)) { BUG("exiting thread %d error=%d\n", (int)pa->tid, stat); pthread_mutex_lock(&pa->mutex); pa->current_status = 5000+stat; /* io error */ pthread_mutex_unlock(&pa->mutex); break; } if (stat == HPMUD_R_OK) { pthread_mutex_lock(&pa->mutex); new_status = parse_pjl_device_status(buf, &pa->current_status); new_eoj = parse_pjl_job_end(buf, &pa->eoj_pages); pthread_mutex_unlock(&pa->mutex); if (new_status) BUG("read new pjl status: %d\n", pa->current_status); if (new_eoj) BUG("read pjl job_end: %d\n", pa->eoj_pages); } else sleep(1); } DBG("exiting thread %d abort=%d stat=%d\n", (int)pa->tid, pa->abort, stat); pa->done=1; pthread_cond_signal(&pa->done_cond); return; } /* * get_printer_status * * inputs: * dd - device descriptor * pa - see pjl_attributes definition * * outputs: * return - printer status, 1000 to 1999 = inkjet vstatus, 5000 to 5999 = hpmud error, 10000 to 55999 = pjl status code * */ static int get_printer_status(HPMUD_DEVICE dd, HPMUD_CHANNEL cd, struct pjl_attributes *pa) { char id[1024]; char *pSf; int status, ver, len; enum HPMUD_RESULT r; if (pa->pjl_device) { pthread_mutex_lock(&pa->mutex); status = pa->current_status; pthread_mutex_unlock(&pa->mutex); } else { status = VSTATUS_IDLE; /* set default */ r = hpmud_get_device_id(dd, id, sizeof(id), &len); // if (!(r == HPMUD_R_OK || r == HPMUD_R_DEVICE_BUSY)) if (r != HPMUD_R_OK) { status = 5000+r; /* no deviceid, return some error */ goto bugout; } /* Check for valid S-field in device id string. */ if ((pSf = strstr(id, ";S:")) == NULL) { /* No S-field, use status register instead of device id. */ unsigned int bit_status; r = hpmud_get_device_status(dd, &bit_status); // if (!(r == HPMUD_R_OK || r == HPMUD_R_DEVICE_BUSY)) if (r != HPMUD_R_OK) { status = 5000+r; /* no 8-bit status, return some error */ goto bugout; } if (DEVICE_IS_OOP(bit_status)) status = VSTATUS_OOPA; else if (DEVICE_PAPER_JAMMED(bit_status)) status = VSTATUS_PAJM; else if (DEVICE_IO_TRAP(bit_status)) status = VSTATUS_CARS; } else { /* Valid S-field, get version number. */ pSf+=3; ver = 0; HEX2INT(*pSf, ver); pSf++; ver = ver << 4; HEX2INT(*pSf, ver); pSf++; /* Position pointer to printer state subfield. */ switch (ver) { case 0: case 1: case 2: pSf+=12; break; case 3: pSf+=14; break; case 4: pSf+=18; break; default: BUG("WARNING: unknown S-field version=%d\n", ver); pSf+=12; break; } /* Extract VStatus.*/ status = 0; HEX2INT(*pSf, status); pSf++; status = status << 4; HEX2INT(*pSf, status); status += 1000; } } bugout: return status; } static int device_discovery() { char buf[HPMUD_LINE_SIZE*64]; int cnt=0, bytes_read, r=1; enum HPMUD_RESULT stat; stat = hpmud_probe_printers(HPMUD_BUS_ALL, buf, sizeof(buf), &cnt, &bytes_read); if (stat != HPMUD_R_OK) goto bugout; if (cnt == 0) #ifdef HAVE_CUPS11 fprintf(stdout, "direct hp:/no_device_found \"Unknown\" \"hp no_device_found\"\n"); #else fprintf(stdout, "direct hp \"Unknown\" \"HP Printer (HPLIP)\"\n"); #endif else fprintf(stdout, "%s", buf); r = 0; bugout: return r; } #ifdef HAVE_DBUS static int device_event(const char *dev, const char *printer, int code, const char *username, const char *jobid, const char *title) { DBusMessage * msg = NULL; int id = atoi(jobid); if (dbus_conn == NULL) return 0; msg = dbus_message_new_signal(DBUS_PATH, DBUS_INTERFACE, "Event"); if (NULL == msg) { BUG("dbus message is NULL!\n"); return 0; } dbus_message_append_args(msg, DBUS_TYPE_STRING, &dev, DBUS_TYPE_STRING, &printer, DBUS_TYPE_UINT32, &code, DBUS_TYPE_STRING, &username, DBUS_TYPE_UINT32, &id, DBUS_TYPE_STRING, &title, DBUS_TYPE_INVALID); if (!dbus_connection_send(dbus_conn, msg, NULL)) { BUG("dbus message send failed!\n"); return 0; } dbus_connection_flush(dbus_conn); dbus_message_unref(msg); return 1; } int init_dbus(void) { dbus_error_init(&dbus_err); dbus_conn = dbus_bus_get(DBUS_BUS_SYSTEM, &dbus_err); if (dbus_error_is_set(&dbus_err)) { BUG("dBus Connection Error (%s)!\n", dbus_err.message); dbus_error_free(&dbus_err); } if (dbus_conn == NULL) { return 0; } return 1; } #else static int device_event(const char *dev, const char *printer, int code, const char *username, const char *jobid, const char *title) { return 1; } int init_dbus(void) { return 1; } #endif /* HAVE_DBUS */ /* Check printer status, if a valid error state, loop until error condition is cleared. */ static int loop_test(HPMUD_DEVICE dd, HPMUD_CHANNEL cd, struct pjl_attributes *pa, const char *dev, const char *printer, const char *username, const char *jobid, const char *title) { int status, stat; const char *pstate, *old_state=NULL; while (1) { status = get_printer_status(dd, cd, pa); map_ipp_printer_state_reason(status, &pstate); /* Check for user intervention errors. */ if (strstr(pstate, "error")) { if (pstate != old_state) { if (old_state) { /* Clear old error. */ // device_event(dev, printer, status, username, jobid, title); fprintf(stderr, "STATE: -%s\n", old_state); } /* Display error. */ device_event(dev, printer, status, username, jobid, title); fprintf(stderr, "STATE: +%s\n", pstate); old_state = pstate; } BUG("ERROR: %d %s; will retry in %d seconds...\n", status, pstate, RETRY_TIMEOUT); sleep(RETRY_TIMEOUT); continue; } /* Clear any old state. */ if (old_state) fprintf(stderr, "STATE: -%s\n", old_state); /* Check for system errors. */ if (status >= 5000 && status <= 5999) { /* Display error. */ device_event(dev, printer, status, username, jobid, title); BUG("ERROR: %d device communication error!\n", status); stat = 1; } else stat = 0; break; /* done */ } return stat; } static FILE* create_out_file(char* job_id, char* user_name) { char fname[256] = {0,}; FILE *temp_fp = NULL; snprintf(fname, sizeof(fname), "%s/hp_%s_out_%s_XXXXXX",CUPS_TMP_DIR, user_name, job_id); createTempFile(fname, &temp_fp); if (temp_fp) { chmod(fname, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH); } else { BUG("ERROR: unable to create Temporary file %s: %m\n", fname); } return temp_fp; } static void save_out_file(int fd, int copies, FILE * temp_fp) { int len = 0; char buf[HPMUD_BUFFER_SIZE]; if (NULL == temp_fp) { BUG("ERROR: save_out_file function recieved NULL temp_fp pointer\n"); return; } while (copies > 0) { copies--; if (fd != 0) { lseek(fd, 0, SEEK_SET); } while ((len = read(fd, buf, sizeof(buf))) > 0) { fwrite (buf, 1, len, temp_fp); } } } int main(int argc, char *argv[]) { int fd; int copies; int len, status, cnt, exit_stat=BACKEND_FAILED; char buf[HPMUD_BUFFER_SIZE]; struct hpmud_model_attributes ma; struct pjl_attributes pa; HPMUD_DEVICE hd=-1; HPMUD_CHANNEL cd=-1; int n, total=0, retry=0, size, pages; enum HPMUD_RESULT stat; char *printer = getenv("PRINTER"); int iLogLevel = 0; FILE *temp_fp = NULL; int saveoutfile = 0; // 0 1 2 3 4 5 // device_uri job-id user title copies options openlog("hp", LOG_PID, LOG_DAEMON); pa.tid = 0; if (argc > 1) { const char *arg = argv[1]; if ((arg[0] == '-') && (arg[1] == 'h')) { fprintf(stdout, "HP Linux Imaging and Printing System\nCUPS Backend %s\n", VERSION); fprintf(stdout, "(c) 2003-2008 Copyright HP Development Company, LP\n"); exit(0); } } if (argc == 1) exit (device_discovery()); if (argc < 6 || argc > 7) { BUG("ERROR: invalid usage: device_uri job-id user title copies options [file]\n"); exit (1); } if (argc == 6) { fd = 0; /* use stdin. */ copies = 1; } else { if ((fd = open(argv[6], O_RDONLY)) < 0) /* use specified file */ { BUG("ERROR: unable to open print file %s: %m\n", argv[6]); exit (1); } copies = atoi(argv[4]); } iLogLevel = getHPLogLevel(); if(SAVE_OUT_FILE_IN_BACKEND & iLogLevel) { temp_fp = create_out_file(argv[1], argv[2]); if(temp_fp) saveoutfile = 1; } if( DONT_SEND_TO_PRINTER & iLogLevel ) { if(temp_fp) { saveoutfile = 1; save_out_file(fd, copies, temp_fp); } exit (BACKEND_OK); } signal(SIGTERM, SIG_IGN); init_dbus(); /* Get any parameters needed for DeviceOpen. */ hpmud_query_model(argv[0], &ma); DBG("job start %s prt_mode=%d statustype=%d\n", argv[0], ma.prt_mode, ma.statustype); pa.pjl_device = 0; if (strcasestr(argv[0], ":/net") == NULL && (ma.statustype==HPMUD_STATUSTYPE_PJL || ma.statustype==HPMUD_STATUSTYPE_PJLPML)) pa.pjl_device = 1; device_event(argv[0], printer, EVENT_START_JOB, argv[2], argv[1], argv[3]); /* Write print file. */ while (copies > 0) { copies--; if (fd != 0) { fputs("PAGE: 1 1\n", stderr); lseek(fd, 0, SEEK_SET); } while ((len = read(fd, buf, sizeof(buf))) > 0) { size=len; total=0; while (size > 0) { if (saveoutfile) fwrite (buf, 1, len, temp_fp); /* Got some data now open the hp device. This will handle any HPIJS device contention. */ if (hd <= 0) { fputs("STATE: +connecting-to-device\n", stderr); /* Open hp device. */ while ((stat = hpmud_open_device(argv[0], ma.prt_mode, &hd)) != HPMUD_R_OK) { if (getenv("CLASS") != NULL) { /* The job was submitted to a class and not a specific queue. Abort to * give another class member a chance to print the job. */ BUG("INFO: open device failed stat=%d: %s; trying next printer in class...\n", stat, argv[0]); sleep (5); /* Prevent job requeuing too quickly. */ goto bugout; } if (stat != HPMUD_R_DEVICE_BUSY) { BUG("ERROR: open device failed stat=%d: %s\n", stat, argv[0]); goto bugout; } /* Display user error. */ device_event(argv[0], printer, 5000+stat, argv[2], argv[1], argv[3]); BUG("INFO: open device failed stat=%d: %s; will retry in %d seconds...\n", stat, argv[0], RETRY_TIMEOUT); sleep(RETRY_TIMEOUT); retry = 1; } if (retry) { /* Clear user error. */ device_event(argv[0], printer, VSTATUS_PRNT, argv[2], argv[1], argv[3]); retry=0; } while ((stat = hpmud_open_channel(hd, HPMUD_S_PRINT_CHANNEL, &cd)) != HPMUD_R_OK) { if (stat != HPMUD_R_DEVICE_BUSY) { BUG("ERROR: cannot open channel %s\n", HPMUD_S_PRINT_CHANNEL); goto bugout; } device_event(argv[0], printer, 5000+stat, argv[2], argv[1], argv[3]); BUG("INFO: open print channel failed stat=%d; will retry in %d seconds...\n", stat, RETRY_TIMEOUT); sleep(RETRY_TIMEOUT); retry = 1; } if (retry) { /* Clear user error. */ device_event(argv[0], printer, VSTATUS_PRNT, argv[2], argv[1], argv[3]); retry=0; } fputs("STATE: -connecting-to-device\n", stderr); if (pa.pjl_device) { /* Enable unsolicited status. */ hpmud_write_channel(hd, cd, pjl_ustatus_cmd, sizeof(pjl_ustatus_cmd)-1, 5, &len); pa.dd = hd; pa.cd = cd; pthread_mutex_init(&pa.mutex, NULL); pthread_cond_init(&pa.done_cond, NULL); pthread_create(&pa.tid, NULL, (void *(*)(void*))pjl_read_thread, (void *)&pa); } /* Clear any errors left over from a previous job. */ fprintf(stderr, "STATE: -%s\n", "media-empty-error,media-jam-error,hplip.plugin-error," "cover-open-error,toner-empty-error,other"); } /* if (hd <= 0) */ stat = hpmud_write_channel(hd, cd, buf+total, size, EXCEPTION_TIMEOUT, &n); if (n != size) { /* IO error, get printer status. */ if (loop_test(hd, cd, &pa, argv[0], printer, argv[2], argv[1], argv[3])) { exit_stat = BACKEND_STOP; /* stop queue */ goto bugout; } } else { /* Data was sent to device successfully. */ if (pa.pjl_device) { /* Laserjets have a large data buffer, so manually check for operator intervention condition. */ if (loop_test(hd, cd, &pa, argv[0], printer, argv[2], argv[1], argv[3])) { exit_stat = BACKEND_STOP; /* stop queue */ goto bugout; } } } total+=n; size-=n; } /* while (size > 0) */ } /* while ((len = read(fd, buf, HPLIP_BUFFER_SIZE)) > 0) */ } /* while (copies > 0) */ DBG("job end %s prt_mode=%d statustype=%d total=%d\n", argv[0], ma.prt_mode, ma.statustype, total); /* Note read() could return zero bytes. Check for bogus null print job. */ if (total==0) { exit_stat = BACKEND_OK; /* leave queue up */ BUG("ERROR: null print job total=%d\n", total); goto bugout; } if (pa.pjl_device && pa.tid) { pthread_mutex_lock(&pa.mutex); pa.eoj_pages=0; pthread_mutex_unlock(&pa.mutex); hpmud_write_channel(hd, cd, pjl_job_end_cmd, sizeof(pjl_job_end_cmd)-1, 5, &len); /* Look for job end status. */ for (cnt=0; cnt<10; cnt++) { if (loop_test(hd, cd, &pa, argv[0], printer, argv[2], argv[1], argv[3])) { exit_stat = BACKEND_OK; /* leave queue up */ goto bugout; } pthread_mutex_lock(&pa.mutex); pages = pa.eoj_pages; pthread_mutex_unlock(&pa.mutex); if (pages > 0) { DBG("job end pages=%d\n", pages); break; } DBG("waiting for job end status...\n"); sleep(2); } hpmud_write_channel(hd, cd, pjl_ustatus_off_cmd, sizeof(pjl_ustatus_off_cmd)-1, 5, &len); } else if ((ma.prt_mode != HPMUD_UNI_MODE) && (ma.statustype == HPMUD_STATUSTYPE_SFIELD)) { /* Wait for printer to receive all data before closing print channel. Otherwise data can be truncated. */ status = get_printer_status(hd, cd, &pa); if (status < 5000) { /* Got valid status, wait for idle. */ cnt=0; while ((status != VSTATUS_IDLE) && (status < 5000) && (cnt < 5)) { sleep(2); status = get_printer_status(hd, cd, &pa); cnt++; } } } else { /* Just use fixed delay for uni-di, VSTATUS devices and laserjets without pjl. */ sleep(8); } exit_stat = BACKEND_OK; fputs("INFO: ready to print\n", stderr); bugout: device_event(argv[0], printer, EVENT_END_JOB, argv[2], argv[1], argv[3]); if (pa.pjl_device && pa.tid) { /* Gracefully kill the pjl_read_thread. */ pthread_mutex_lock(&pa.mutex); pa.abort=1; while (!pa.done) pthread_cond_wait(&pa.done_cond, &pa.mutex); pthread_mutex_unlock(&pa.mutex); pthread_cancel(pa.tid); pthread_mutex_destroy(&pa.mutex); pthread_cond_destroy(&pa.done_cond); } if (cd >= 0) hpmud_close_channel(hd, cd); if (hd >= 0) hpmud_close_device(hd); if (fd != 0) close(fd); if (temp_fp) fclose(temp_fp); exit (exit_stat); }