# Korean messages for GNU tar # Copyright (C) 1996 Free Software Foundation, Inc. # Bang Jun-Young , 1996-1997. # msgid "" msgstr "" "Project-Id-Version: GNU tar 1.12\n" "Report-Msgid-Bugs-To: bug-tar@gnu.org\n" "POT-Creation-Date: 2010-03-10 12:53+0200\n" "PO-Revision-Date: 1997-05-30 22:55+0900\n" "Last-Translator: Bang Jun-Young \n" "Language-Team: Korean \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=EUC-KR\n" "Content-Transfer-Encoding: 8-bit\n" #: gnu/argmatch.c:135 #, fuzzy, c-format msgid "invalid argument %s for %s" msgstr "부적절한 날짜 형식 `%s'" #: gnu/argmatch.c:136 #, fuzzy, c-format msgid "ambiguous argument %s for %s" msgstr "모호한 패턴 `%s'" #: gnu/argmatch.c:155 #, c-format msgid "Valid arguments are:" msgstr "" #: gnu/argp-help.c:149 #, c-format msgid "ARGP_HELP_FMT: %s value is less than or equal to %s" msgstr "" #: gnu/argp-help.c:222 #, c-format msgid "%.*s: ARGP_HELP_FMT parameter requires a value" msgstr "" #: gnu/argp-help.c:228 #, c-format msgid "%.*s: ARGP_HELP_FMT parameter must be positive" msgstr "" #: gnu/argp-help.c:237 #, c-format msgid "%.*s: Unknown ARGP_HELP_FMT parameter" msgstr "" #: gnu/argp-help.c:249 #, c-format msgid "Garbage in ARGP_HELP_FMT: %s" msgstr "" #: gnu/argp-help.c:1246 msgid "" "Mandatory or optional arguments to long options are also mandatory or " "optional for any corresponding short options." msgstr "" #: gnu/argp-help.c:1639 msgid "Usage:" msgstr "" #: gnu/argp-help.c:1643 msgid " or: " msgstr "" #: gnu/argp-help.c:1655 #, fuzzy msgid " [OPTION...]" msgstr "" "\n" "사용법: %s [옵션]...\n" "\n" # #: gnu/argp-help.c:1682 #, fuzzy, c-format msgid "Try `%s --help' or `%s --usage' for more information.\n" msgstr "더 많은 정보를 보려면 `%s --help' 하십시오.\n" #: gnu/argp-help.c:1710 #, c-format msgid "Report bugs to %s.\n" msgstr "" #: gnu/argp-help.c:1929 gnu/error.c:155 msgid "Unknown system error" msgstr "알 수 없는 시스템 오류" #: gnu/argp-parse.c:83 msgid "give this help list" msgstr "" #: gnu/argp-parse.c:84 msgid "give a short usage message" msgstr "" #: gnu/argp-parse.c:85 src/tar.c:488 src/tar.c:490 src/tar.c:559 #: tests/genfile.c:131 msgid "NAME" msgstr "" #: gnu/argp-parse.c:85 msgid "set the program name" msgstr "" #: gnu/argp-parse.c:86 msgid "SECS" msgstr "" #: gnu/argp-parse.c:87 msgid "hang for SECS seconds (default 3600)" msgstr "" #: gnu/argp-parse.c:144 msgid "print program version" msgstr "" #: gnu/argp-parse.c:160 #, c-format msgid "(PROGRAM ERROR) No version known!?" msgstr "" #: gnu/argp-parse.c:613 #, c-format msgid "%s: Too many arguments\n" msgstr "" #: gnu/argp-parse.c:756 msgid "(PROGRAM ERROR) Option should have been recognized!?" msgstr "" #: gnu/closeout.c:114 msgid "write error" msgstr "" #: gnu/getopt.c:531 gnu/getopt.c:547 #, fuzzy, c-format msgid "%s: option '%s' is ambiguous\n" msgstr "오래된 옵션 `%c'는 인수가 필요합니다." #: gnu/getopt.c:580 gnu/getopt.c:584 #, fuzzy, c-format msgid "%s: option '--%s' doesn't allow an argument\n" msgstr "오래된 옵션 `%c'는 인수가 필요합니다." #: gnu/getopt.c:593 gnu/getopt.c:598 #, fuzzy, c-format msgid "%s: option '%c%s' doesn't allow an argument\n" msgstr "오래된 옵션 `%c'는 인수가 필요합니다." #: gnu/getopt.c:641 gnu/getopt.c:660 gnu/getopt.c:963 gnu/getopt.c:982 #, fuzzy, c-format msgid "%s: option '%s' requires an argument\n" msgstr "오래된 옵션 `%c'는 인수가 필요합니다." #: gnu/getopt.c:698 gnu/getopt.c:701 #, c-format msgid "%s: unrecognized option '--%s'\n" msgstr "" #: gnu/getopt.c:709 gnu/getopt.c:712 #, c-format msgid "%s: unrecognized option '%c%s'\n" msgstr "" #: gnu/getopt.c:761 gnu/getopt.c:764 #, fuzzy, c-format msgid "%s: invalid option -- '%c'\n" msgstr "record_size로 부적절한 값" #: gnu/getopt.c:814 gnu/getopt.c:831 gnu/getopt.c:1034 gnu/getopt.c:1052 #, fuzzy, c-format msgid "%s: option requires an argument -- '%c'\n" msgstr "오래된 옵션 `%c'는 인수가 필요합니다." #: gnu/getopt.c:884 gnu/getopt.c:900 #, fuzzy, c-format msgid "%s: option '-W %s' is ambiguous\n" msgstr "오래된 옵션 `%c'는 인수가 필요합니다." #: gnu/getopt.c:924 gnu/getopt.c:942 #, fuzzy, c-format msgid "%s: option '-W %s' doesn't allow an argument\n" msgstr "오래된 옵션 `%c'는 인수가 필요합니다." #: gnu/obstack.c:425 gnu/obstack.c:427 gnu/xalloc-die.c:36 #, fuzzy msgid "memory exhausted" msgstr "메모리가 바닥남" # #: gnu/openat-die.c:36 #, fuzzy, c-format msgid "unable to record current working directory" msgstr "현재 디렉토리를 알 수 없습니다" #: gnu/openat-die.c:54 #, c-format msgid "failed to return to initial working directory" msgstr "" #. TRANSLATORS: #. Get translations for open and closing quotation marks. #. #. The message catalog should translate "`" to a left #. quotation mark suitable for the locale, and similarly for #. "'". If the catalog has no translation, #. locale_quoting_style quotes `like this', and #. clocale_quoting_style quotes "like this". #. #. For example, an American English Unicode locale should #. translate "`" to U+201C (LEFT DOUBLE QUOTATION MARK), and #. should translate "'" to U+201D (RIGHT DOUBLE QUOTATION #. MARK). A British English Unicode locale should instead #. translate these to U+2018 (LEFT SINGLE QUOTATION MARK) #. and U+2019 (RIGHT SINGLE QUOTATION MARK), respectively. #. #. If you don't know what to put here, please see #. #. and use glyphs suitable for your language. #: gnu/quotearg.c:274 msgid "`" msgstr "" #: gnu/quotearg.c:275 msgid "'" msgstr "" #. TRANSLATORS: A regular expression testing for an affirmative answer #. (english: "yes"). Testing the first character may be sufficient. #. Take care to consider upper and lower case. #. To enquire the regular expression that your system uses for this #. purpose, you can use the command #. locale -k LC_MESSAGES | grep '^yesexpr=' #: gnu/rpmatch.c:149 msgid "^[yY]" msgstr "" #. TRANSLATORS: A regular expression testing for a negative answer #. (english: "no"). Testing the first character may be sufficient. #. Take care to consider upper and lower case. #. To enquire the regular expression that your system uses for this #. purpose, you can use the command #. locale -k LC_MESSAGES | grep '^noexpr=' #: gnu/rpmatch.c:162 msgid "^[nN]" msgstr "" #: gnu/version-etc.c:76 #, c-format msgid "Packaged by %s (%s)\n" msgstr "" #: gnu/version-etc.c:79 #, c-format msgid "Packaged by %s\n" msgstr "" #. TRANSLATORS: Translate "(C)" to the copyright symbol #. (C-in-a-circle), if this symbol is available in the user's #. locale. Otherwise, do not translate "(C)"; leave it as-is. #: gnu/version-etc.c:86 msgid "(C)" msgstr "" #: gnu/version-etc.c:88 msgid "" "\n" "License GPLv3+: GNU GPL version 3 or later .\n" "This is free software: you are free to change and redistribute it.\n" "There is NO WARRANTY, to the extent permitted by law.\n" "\n" msgstr "" #. TRANSLATORS: %s denotes an author name. #: gnu/version-etc.c:104 #, c-format msgid "Written by %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #: gnu/version-etc.c:108 #, c-format msgid "Written by %s and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #: gnu/version-etc.c:112 #, c-format msgid "Written by %s, %s, and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:119 #, c-format msgid "" "Written by %s, %s, %s,\n" "and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:126 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:133 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:141 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:149 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:158 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:169 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, %s, and others.\n" msgstr "" #. TRANSLATORS: The placeholder indicates the bug-reporting address #. for this package. Please add _another line_ saying #. "Report translation bugs to <...>\n" with the address for translation #. bugs (typically your translation team's web or email address). #: gnu/version-etc.c:247 #, fuzzy, c-format msgid "" "\n" "Report bugs to: %s\n" msgstr "" "\n" "로 버그를 보고해 주십시오.\n" #: gnu/version-etc.c:249 #, fuzzy, c-format msgid "Report %s bugs to: %s\n" msgstr "" "\n" "로 버그를 보고해 주십시오.\n" #: gnu/version-etc.c:253 #, c-format msgid "%s home page: <%s>\n" msgstr "" #: gnu/version-etc.c:255 #, c-format msgid "%s home page: \n" msgstr "" #: gnu/version-etc.c:258 msgid "General help using GNU software: \n" msgstr "" # #. TRANSLATORS: %s after `Cannot' is a function name, e.g. `Cannot open'. #. Directly translating this to another language will not work, first because #. %s itself is not translated. #. Translate it as `%s: Function %s failed'. #: lib/paxerror.c:58 lib/paxerror.c:71 #, fuzzy, c-format msgid "%s: Cannot %s" msgstr "%s를 실행할 수 없습니다" #. TRANSLATORS: %s after `Cannot' is a function name, e.g. `Cannot open'. #. Directly translating this to another language will not work, first because #. %s itself is not translated. #. Translate it as `%s: Function %s failed'. #: lib/paxerror.c:84 #, c-format msgid "%s: Warning: Cannot %s" msgstr "" #: lib/paxerror.c:93 #, fuzzy, c-format msgid "%s: Cannot change mode to %s" msgstr "%s: 모드를 %0.4o로 바꿀 수 없습니다" #: lib/paxerror.c:101 #, fuzzy, c-format msgid "%s: Cannot change ownership to uid %lu, gid %lu" msgstr "%s: 소유자를 uid %d, gid %d로 바꿀 수 없습니다" # #: lib/paxerror.c:127 #, fuzzy, c-format msgid "%s: Cannot hard link to %s" msgstr "링크 %s를 읽을 수 없습니다" # #: lib/paxerror.c:179 lib/paxerror.c:211 #, fuzzy, c-format msgid "%s: Read error at byte %s, while reading %lu byte" msgid_plural "%s: Read error at byte %s, while reading %lu bytes" msgstr[0] "%ld 바이트째에서 읽기 오류, %d 바이트 읽음, 파일 %s" msgstr[1] "%ld 바이트째에서 읽기 오류, %d 바이트 읽음, 파일 %s" # #: lib/paxerror.c:192 #, fuzzy, c-format msgid "%s: Warning: Read error at byte %s, while reading %lu byte" msgid_plural "%s: Warning: Read error at byte %s, while reading %lu bytes" msgstr[0] "%ld 바이트째에서 읽기 오류, %d 바이트 읽음, 파일 %s" msgstr[1] "%ld 바이트째에서 읽기 오류, %d 바이트 읽음, 파일 %s" # #: lib/paxerror.c:259 #, fuzzy, c-format msgid "%s: Cannot seek to %s" msgstr "%s에 쓸 수 없습니다" #: lib/paxerror.c:275 #, c-format msgid "%s: Warning: Cannot seek to %s" msgstr "" #: lib/paxerror.c:284 #, fuzzy, c-format msgid "%s: Cannot create symlink to %s" msgstr "%s: `%s'에 대한 기호링크를 만들 수 없습니다" #: lib/paxerror.c:349 #, fuzzy, c-format msgid "%s: Wrote only %lu of %lu byte" msgid_plural "%s: Wrote only %lu of %lu bytes" msgstr[0] "%s: %d 바이트(%d 바이트 중)만 썼습니다" msgstr[1] "%s: %d 바이트(%d 바이트 중)만 썼습니다" # #: lib/paxnames.c:155 #, fuzzy, c-format msgid "Removing leading `%s' from member names" msgstr "절대 링크들에서 앞에 붙은 `/'를 제거함" # #: lib/paxnames.c:156 #, fuzzy, c-format msgid "Removing leading `%s' from hard link targets" msgstr "절대 링크들에서 앞에 붙은 `/'를 제거함" #: lib/paxnames.c:169 msgid "Substituting `.' for empty member name" msgstr "" #: lib/paxnames.c:170 msgid "Substituting `.' for empty hard link target" msgstr "" # #: lib/rtapelib.c:299 #, c-format msgid "exec/tcp: Service not available" msgstr "exec/tcp: 쓸 수 없는 서비스" #: lib/rtapelib.c:303 #, c-format msgid "stdin" msgstr "표준입력" #: lib/rtapelib.c:306 #, c-format msgid "stdout" msgstr "표준출력" #: lib/rtapelib.c:429 #, c-format msgid "Cannot connect to %s: resolve failed" msgstr "" # #: lib/rtapelib.c:515 #, c-format msgid "Cannot execute remote shell" msgstr "원격 셸을 실행할 수 없습니다" #: rmt/rmt.c:413 msgid "Seek direction out of range" msgstr "" #: rmt/rmt.c:419 #, fuzzy msgid "Invalid seek direction" msgstr "옵션에 부적절한 모드가 주어짐" #: rmt/rmt.c:427 #, fuzzy msgid "Invalid seek offset" msgstr "부적절한 날짜 형식 `%s'" #: rmt/rmt.c:433 msgid "Seek offset out of range" msgstr "" #: rmt/rmt.c:474 rmt/rmt.c:525 rmt/rmt.c:589 #, fuzzy msgid "Invalid byte count" msgstr "옵션에 부적절한 소유자가 주어짐" #: rmt/rmt.c:480 rmt/rmt.c:531 rmt/rmt.c:595 rmt/rmt.c:606 msgid "Byte count out of range" msgstr "" # #: rmt/rmt.c:539 #, fuzzy msgid "Premature eof" msgstr "rmtd: 잘못된 eof\n" #: rmt/rmt.c:582 #, fuzzy msgid "Invalid operation code" msgstr "record_size로 부적절한 값" #: rmt/rmt.c:617 rmt/rmt.c:661 msgid "Operation not supported" msgstr "" # #: rmt/rmt.c:645 #, fuzzy msgid "Unexpected arguments" msgstr "아카이브에 예기치 않은 EOF" #: rmt/rmt.c:670 msgid "Manipulate a tape drive, accepting commands from a remote process" msgstr "" #: rmt/rmt.c:677 src/tar.c:423 src/tar.c:427 src/tar.c:557 src/tar.c:572 #: src/tar.c:703 src/tar.c:741 tests/genfile.c:167 msgid "NUMBER" msgstr "" #: rmt/rmt.c:678 msgid "set debug level" msgstr "" #: rmt/rmt.c:679 src/tar.c:421 src/tar.c:562 src/tar.c:638 src/tar.c:642 #: src/tar.c:654 src/tar.c:664 src/tar.c:667 src/tar.c:669 src/tar.c:756 #: tests/genfile.c:133 tests/genfile.c:181 tests/genfile.c:185 #: tests/genfile.c:188 tests/genfile.c:194 msgid "FILE" msgstr "" #: rmt/rmt.c:680 msgid "set debug output file name" msgstr "" # #: rmt/rmt.c:696 rmt/rmt.c:764 #, fuzzy, c-format msgid "cannot open %s" msgstr "%s를 열 수 없습니다" #: rmt/rmt.c:761 tests/genfile.c:885 tests/genfile.c:902 #, c-format msgid "too many arguments" msgstr "" # #: rmt/rmt.c:803 msgid "Garbage command" msgstr "쓸모없는 명령" # #: src/buffer.c:321 src/buffer.c:326 src/buffer.c:572 src/buffer.c:1176 #: src/buffer.c:1222 src/buffer.c:1251 src/delete.c:211 src/list.c:171 #: src/update.c:189 msgid "This does not look like a tar archive" msgstr "이것은 tar 아카이브처럼 보이지 않습니다" # #: src/buffer.c:385 src/buffer.c:394 #, fuzzy msgid "Total bytes written" msgstr "총 쓰여진 바이트: " # #: src/buffer.c:392 src/buffer.c:406 #, fuzzy msgid "Total bytes read" msgstr "총 쓰여진 바이트: " # #: src/buffer.c:396 #, fuzzy, c-format msgid "Total bytes deleted: %s\n" msgstr "총 쓰여진 바이트: " #: src/buffer.c:485 msgid "(pipe)" msgstr "" #: src/buffer.c:508 msgid "Invalid value for record_size" msgstr "record_size로 부적절한 값" # #: src/buffer.c:511 msgid "No archive name given" msgstr "아카이브 이름이 주어지지 않았습니다" # #: src/buffer.c:555 msgid "Cannot verify stdin/stdout archive" msgstr "표준입/출력 아카이브를 검증할 수 없습니다" #: src/buffer.c:569 #, c-format msgid "Archive is compressed. Use %s option" msgstr "" # #: src/buffer.c:626 src/tar.c:2429 msgid "Cannot update compressed archives" msgstr "압축된 아카이브를 갱신할 수 없습니다" # #: src/buffer.c:705 msgid "At beginning of tape, quitting now" msgstr "테이프의 시작 부분에서 지금 종료함" # #: src/buffer.c:711 msgid "Too many errors, quitting" msgstr "오류가 너무 많아서 종료합니다" #: src/buffer.c:744 #, fuzzy, c-format msgid "Record size = %lu block" msgid_plural "Record size = %lu blocks" msgstr[0] "레코드 크기 = %d 블럭" msgstr[1] "레코드 크기 = %d 블럭" #: src/buffer.c:765 #, c-format msgid "Unaligned block (%lu byte) in archive" msgid_plural "Unaligned block (%lu bytes) in archive" msgstr[0] "" msgstr[1] "" #: src/buffer.c:842 msgid "Cannot backspace archive file; it may be unreadable without -i" msgstr "" #: src/buffer.c:874 msgid "rmtlseek not stopped at a record boundary" msgstr "" #: src/buffer.c:928 #, c-format msgid "%s: contains invalid volume number" msgstr "" #: src/buffer.c:963 msgid "Volume number overflow" msgstr "" # #: src/buffer.c:978 #, fuzzy, c-format msgid "Prepare volume #%d for %s and hit return: " msgstr "볼륨 #%d(%s를 위한)를 준비하고 리턴을 치세요: " #: src/buffer.c:984 msgid "EOF where user reply was expected" msgstr "사용자의 응답이 필요한 곳에 EOF가 있음" # #: src/buffer.c:989 src/buffer.c:1021 msgid "WARNING: Archive is incomplete" msgstr "경고: 아카이브가 불완전합니다" #: src/buffer.c:1003 #, fuzzy, c-format msgid "" " n name Give a new file name for the next (and subsequent) volume(s)\n" " q Abort tar\n" " y or newline Continue operation\n" msgstr "" " n [이름] 다음(과 그 이후의) 볼륨에 대한 새 파일 이름을 지정합니다\n" " q tar를 중단합니다\n" " ! 서브셸을 실행합니다\n" " ? 이 목록을 인쇄합니다\n" #: src/buffer.c:1008 #, c-format msgid " ! Spawn a subshell\n" msgstr "" #: src/buffer.c:1009 #, c-format msgid " ? Print this list\n" msgstr "" # #: src/buffer.c:1016 msgid "No new volume; exiting.\n" msgstr "새 볼륨이 아님; 종료.\n" #: src/buffer.c:1049 msgid "File name not specified. Try again.\n" msgstr "" #: src/buffer.c:1062 #, c-format msgid "Invalid input. Type ? for help.\n" msgstr "" #: src/buffer.c:1113 #, c-format msgid "%s command failed" msgstr "" # #: src/buffer.c:1294 #, fuzzy, c-format msgid "%s is possibly continued on this volume: header contains truncated name" msgstr "%s는 이 볼륨에 연속되어 있지 않습니다" # #: src/buffer.c:1298 #, c-format msgid "%s is not continued on this volume" msgstr "%s는 이 볼륨에 연속되어 있지 않습니다" # #: src/buffer.c:1312 #, fuzzy, c-format msgid "%s is the wrong size (%s != %s + %s)" msgstr "%s는 잘못된 크기입니다 (%ld != %ld + %ld)" # #: src/buffer.c:1326 #, fuzzy, c-format msgid "This volume is out of sequence (%s - %s != %s)" msgstr "이 볼륨은 순서를 벗어났습니다" #: src/buffer.c:1404 src/buffer.c:1430 #, fuzzy, c-format msgid "Archive not labeled to match %s" msgstr "`%s'와 일치하도록 라벨이 붙지 않은 아카이브" #: src/buffer.c:1434 #, fuzzy, c-format msgid "Volume %s does not match %s" msgstr "볼륨 `%s'가 `%s'와 일치하지 않습니다" #: src/buffer.c:1530 #, c-format msgid "" "%s: file name too long to be stored in a GNU multivolume header, truncated" msgstr "" # #: src/buffer.c:1749 #, fuzzy msgid "write did not end on a block boundary" msgstr "블럭 경계가 아닌 부분에서 아카이브 %s의 EOF 검출" # #: src/compare.c:95 #, fuzzy, c-format msgid "Could only read %lu of %lu byte" msgid_plural "Could only read %lu of %lu bytes" msgstr[0] "%d 바이트(%ld 바이트 중)만 읽을 수 있습니다" msgstr[1] "%d 바이트(%ld 바이트 중)만 읽을 수 있습니다" #: src/compare.c:105 src/compare.c:388 #, fuzzy msgid "Contents differ" msgstr "모드가 다릅니다" # #: src/compare.c:131 src/extract.c:830 src/incremen.c:1462 src/list.c:386 #: src/list.c:1376 src/xheader.c:710 msgid "Unexpected EOF in archive" msgstr "아카이브에 예기치 않은 EOF" # #: src/compare.c:179 src/compare.c:195 src/compare.c:313 src/compare.c:412 #, fuzzy msgid "File type differs" msgstr "크기가 다릅니다" #: src/compare.c:182 src/compare.c:202 src/compare.c:327 msgid "Mode differs" msgstr "모드가 다릅니다" # #: src/compare.c:205 msgid "Uid differs" msgstr "uid가 다릅니다" # #: src/compare.c:207 msgid "Gid differs" msgstr "gid가 다릅니다" # #: src/compare.c:211 msgid "Mod time differs" msgstr "변경 시각이 다릅니다" # #: src/compare.c:215 src/compare.c:420 msgid "Size differs" msgstr "크기가 다릅니다" # #: src/compare.c:269 #, c-format msgid "Not linked to %s" msgstr "%s에 연결되지 않음" # #: src/compare.c:292 msgid "Symlink differs" msgstr "기호링크가 다릅니다" # #: src/compare.c:321 #, fuzzy msgid "Device number differs" msgstr "장치 번호가 바뀌었음" # #: src/compare.c:462 #, c-format msgid "Verify " msgstr "검증 " # #: src/compare.c:469 #, fuzzy, c-format msgid "%s: Unknown file type `%c', diffed as normal file" msgstr "%s: 알 수 없는 파일 타입; 파일이 무시됨" #: src/compare.c:524 msgid "Archive contains file names with leading prefixes removed." msgstr "" #: src/compare.c:526 msgid "Verification may fail to locate original files." msgstr "" # #: src/compare.c:599 #, fuzzy, c-format msgid "VERIFY FAILURE: %d invalid header detected" msgid_plural "VERIFY FAILURE: %d invalid headers detected" msgstr[0] "검증 실패: %d개의 부적절한 헤더가 검출됨" msgstr[1] "검증 실패: %d개의 부적절한 헤더가 검출됨" #: src/compare.c:617 src/list.c:148 #, c-format msgid "A lone zero block at %s" msgstr "" #: src/create.c:68 #, c-format msgid "%s: contains a cache directory tag %s; %s" msgstr "" #: src/create.c:273 #, c-format msgid "value %s out of %s range %s..%s; substituting %s" msgstr "" #: src/create.c:279 #, c-format msgid "value %s out of %s range %s..%s" msgstr "" #: src/create.c:339 msgid "Generating negative octal headers" msgstr "" # #: src/create.c:624 src/create.c:687 #, fuzzy, c-format msgid "%s: file name is too long (max %d); not dumped" msgstr "%s: 변경되지 않았습니다; 덤프되지 않음" #: src/create.c:634 #, c-format msgid "%s: file name is too long (cannot be split); not dumped" msgstr "" # #: src/create.c:661 #, fuzzy, c-format msgid "%s: link name is too long; not dumped" msgstr "%s: 변경되지 않았습니다; 덤프되지 않음" # #: src/create.c:1078 #, fuzzy, c-format msgid "%s: File shrank by %s byte; padding with zeros" msgid_plural "%s: File shrank by %s bytes; padding with zeros" msgstr[0] "%s: 파일이 %d 바이트 줄어듬, (와우!)" msgstr[1] "%s: 파일이 %d 바이트 줄어듬, (와우!)" # #: src/create.c:1175 #, fuzzy, c-format msgid "%s: file is on a different filesystem; not dumped" msgstr "%s: 다른 파일시스템 상에 있음; 덤프되지 않음" # #: src/create.c:1219 src/create.c:1230 src/incremen.c:590 src/incremen.c:596 #, fuzzy msgid "contents not dumped" msgstr " (코어 출력됨)" # #: src/create.c:1362 #, c-format msgid "%s: Unknown file type; file ignored" msgstr "%s: 알 수 없는 파일 타입; 파일이 무시됨" # #: src/create.c:1472 #, fuzzy, c-format msgid "Missing links to %s." msgstr " %s로 링크\n" # #: src/create.c:1543 #, fuzzy, c-format msgid "%s: file is unchanged; not dumped" msgstr "%s: 변경되지 않았습니다; 덤프되지 않음" # #: src/create.c:1552 #, fuzzy, c-format msgid "%s: file is the archive; not dumped" msgstr "%s는 아카이브입니다; 덤프되지 않음" #: src/create.c:1593 src/incremen.c:583 msgid "directory not dumped" msgstr "" #: src/create.c:1664 #, c-format msgid "%s: file changed as we read it" msgstr "" #: src/create.c:1731 #, c-format msgid "%s: socket ignored" msgstr "" #: src/create.c:1737 #, c-format msgid "%s: door ignored" msgstr "" # #: src/delete.c:217 src/list.c:185 src/update.c:194 msgid "Skipping to next header" msgstr "다음 헤더로 건너 뜀" # #: src/delete.c:283 msgid "Deleting non-header from archive" msgstr "아카이브에서 비헤더 부분을 제거함" #: src/extract.c:211 #, c-format msgid "%s: implausibly old time stamp %s" msgstr "" #: src/extract.c:229 #, c-format msgid "%s: time stamp %s is %s s in the future" msgstr "" #: src/extract.c:409 #, c-format msgid "%s: Unexpected inconsistency when making directory" msgstr "" #: src/extract.c:613 #, c-format msgid "%s: Directory renamed before its status could be extracted" msgstr "" #: src/extract.c:759 msgid "Extracting contiguous files as regular files" msgstr "연속되어 있는 파일을 일반 파일로 추출함" #: src/extract.c:1039 msgid "Attempting extraction of symbolic links as hard links" msgstr "기호 링크를 하드 링크로 추출하고 있습니다" #: src/extract.c:1183 #, fuzzy, c-format msgid "%s: Cannot extract -- file is continued from another volume" msgstr "`%s'를 추출할 수 없습니다 -- 이 파일은 다른 볼륨에 연속되어 있습니다" # #: src/extract.c:1190 src/list.c:1109 #, fuzzy msgid "Unexpected long name header" msgstr "아카이브 파일에 예기치 않은 EOF" # #: src/extract.c:1197 #, fuzzy, c-format msgid "%s: Unknown file type `%c', extracted as normal file" msgstr "%s: 알 수 없는 파일 타입; 파일이 무시됨" #: src/extract.c:1223 #, c-format msgid "Current %s is newer or same age" msgstr "" #: src/extract.c:1274 #, c-format msgid "%s: Was unable to backup this file" msgstr "%s: 이 파일을 백업할 수 없었습니다" # #: src/extract.c:1402 #, c-format msgid "Cannot rename %s to %s" msgstr "%s를 %s로 이름을 바꿀 수 없습니다" # #: src/incremen.c:482 src/incremen.c:526 #, fuzzy, c-format msgid "%s: Directory has been renamed from %s" msgstr "%s 디렉토리는 이름이 바뀌었습니다" # #: src/incremen.c:494 #, fuzzy, c-format msgid "%s: Directory has been renamed" msgstr "%s 디렉토리는 이름이 바뀌었습니다" # #: src/incremen.c:539 #, fuzzy, c-format msgid "%s: Directory is new" msgstr "%s는 새 디렉토리입니다" #: src/incremen.c:956 src/incremen.c:973 msgid "Invalid time stamp" msgstr "" #: src/incremen.c:1012 #, fuzzy msgid "Invalid modification time (seconds)" msgstr "옵션에 부적절한 모드가 주어짐" #: src/incremen.c:1027 msgid "Invalid modification time (nanoseconds)" msgstr "" #: src/incremen.c:1047 msgid "Invalid device number" msgstr "" #: src/incremen.c:1062 msgid "Invalid inode number" msgstr "" #: src/incremen.c:1113 src/incremen.c:1150 msgid "Field too long while reading snapshot file" msgstr "" # #: src/incremen.c:1120 src/incremen.c:1158 #, fuzzy msgid "Read error in snapshot file" msgstr "%s에서 읽기 오류" # #: src/incremen.c:1122 src/incremen.c:1162 src/incremen.c:1214 #: src/incremen.c:1272 #, fuzzy msgid "Unexpected EOF in snapshot file" msgstr "아카이브 파일에 예기치 않은 EOF" # #: src/incremen.c:1129 src/incremen.c:1169 #, fuzzy msgid "Unexpected field value in snapshot file" msgstr "아카이브 파일에 예기치 않은 EOF" #: src/incremen.c:1264 msgid "Missing record terminator" msgstr "" #: src/incremen.c:1325 src/incremen.c:1328 msgid "Bad incremental file format" msgstr "" #: src/incremen.c:1347 #, c-format msgid "Unsupported incremental format version: %" msgstr "" #: src/incremen.c:1502 #, c-format msgid "Malformed dumpdir: expected '%c' but found %#3o" msgstr "" #: src/incremen.c:1512 msgid "Malformed dumpdir: 'X' duplicated" msgstr "" #: src/incremen.c:1525 msgid "Malformed dumpdir: empty name in 'R'" msgstr "" #: src/incremen.c:1538 msgid "Malformed dumpdir: 'T' not preceeded by 'R'" msgstr "" #: src/incremen.c:1544 msgid "Malformed dumpdir: empty name in 'T'" msgstr "" #: src/incremen.c:1564 #, c-format msgid "Malformed dumpdir: expected '%c' but found end of data" msgstr "" #: src/incremen.c:1571 msgid "Malformed dumpdir: 'X' never used" msgstr "" # #: src/incremen.c:1615 #, fuzzy, c-format msgid "Cannot create temporary directory using template %s" msgstr "%s로 디렉토리를 바꿀 수 없습니다" #: src/incremen.c:1677 #, c-format msgid "%s: Not purging directory: unable to stat" msgstr "" #: src/incremen.c:1690 #, c-format msgid "%s: directory is on a different device: not purging" msgstr "" # #: src/incremen.c:1698 #, c-format msgid "%s: Deleting %s\n" msgstr "%s: %s를 지움\n" # #: src/incremen.c:1703 #, fuzzy, c-format msgid "%s: Cannot remove" msgstr "%s를 지울 수 없습니다" # #: src/list.c:115 #, fuzzy, c-format msgid "%s: Omitting" msgstr "%s를 생략" #: src/list.c:133 #, fuzzy, c-format msgid "block %s: ** Block of NULs **\n" msgstr "블럭 %10ld: ** NUL로 된 블럭 **\n" #: src/list.c:159 #, fuzzy, c-format msgid "block %s: ** End of File **\n" msgstr "블럭 %10ld: ** 파일의 끝 **\n" #: src/list.c:182 src/list.c:1081 src/list.c:1344 #, fuzzy, c-format msgid "block %s: " msgstr "블럭 %10ld: " #. TRANSLATORS: %s is type of the value (gid_t, uid_t, #. etc.) #: src/list.c:689 #, c-format msgid "Blanks in header where numeric %s value expected" msgstr "" #. TRANSLATORS: Second %s is a type name (gid_t,uid_t,etc.) #: src/list.c:744 #, c-format msgid "Archive octal value %.*s is out of %s range; assuming two's complement" msgstr "" #. TRANSLATORS: Second %s is a type name (gid_t,uid_t,etc.) #: src/list.c:755 #, c-format msgid "Archive octal value %.*s is out of %s range" msgstr "" #: src/list.c:776 msgid "Archive contains obsolescent base-64 headers" msgstr "" #: src/list.c:790 #, c-format msgid "Archive signed base-64 string %s is out of %s range" msgstr "" # #: src/list.c:821 #, fuzzy, c-format msgid "Archive base-256 value is out of %s range" msgstr "이 볼륨은 순서를 벗어났습니다" #. TRANSLATORS: Second %s is a type name (gid_t,uid_t,etc.) #: src/list.c:850 #, c-format msgid "Archive contains %.*s where numeric %s value expected" msgstr "" #. TRANSLATORS: Second %s is type name (gid_t,uid_t,etc.) #: src/list.c:872 #, c-format msgid "Archive value %s is out of %s range %s..%s" msgstr "" # #: src/list.c:1245 #, c-format msgid " link to %s\n" msgstr " %s로 링크\n" # #: src/list.c:1253 #, fuzzy, c-format msgid " unknown file type %s\n" msgstr " 알 수 없는 파일 타입 `%c'\n" #: src/list.c:1271 #, c-format msgid "--Long Link--\n" msgstr "" #: src/list.c:1275 #, c-format msgid "--Long Name--\n" msgstr "" # #: src/list.c:1279 #, c-format msgid "--Volume Header--\n" msgstr "--볼륨 헤더--\n" # #: src/list.c:1287 #, fuzzy, c-format msgid "--Continued at byte %s--\n" msgstr "--%ld 바이트 째에 계속됨--\n" # #: src/list.c:1349 msgid "Creating directory:" msgstr "디렉토리를 만드는 중:" # #: src/misc.c:502 #, fuzzy, c-format msgid "Renaming %s to %s\n" msgstr "%s를 %s로 이름 바꿈" # #: src/misc.c:511 src/misc.c:529 #, fuzzy, c-format msgid "%s: Cannot rename to %s" msgstr "%s를 %s로 이름을 바꿀 수 없습니다" # #: src/misc.c:534 #, fuzzy, c-format msgid "Renaming %s back to %s\n" msgstr "%s를 %s로 이름 바꿈" # #: src/misc.c:669 #, fuzzy msgid "Cannot save working directory" msgstr "%s로 디렉토리를 바꿀 수 없습니다" # #: src/misc.c:675 #, fuzzy msgid "Cannot change working directory" msgstr "%s로 디렉토리를 바꿀 수 없습니다" #: src/misc.c:759 #, c-format msgid "%s: File removed before we read it" msgstr "" # #: src/misc.c:774 #, fuzzy, c-format msgid "%s: Directory removed before we read it" msgstr "%s 디렉토리는 이름이 바뀌었습니다" #: src/misc.c:795 msgid "child process" msgstr "" #: src/misc.c:804 msgid "interprocess channel" msgstr "" #: src/names.c:601 msgid "Pattern matching characters used in file names" msgstr "" #: src/names.c:603 msgid "" "Use --wildcards to enable pattern matching, or --no-wildcards to suppress " "this warning" msgstr "" # #: src/names.c:619 src/names.c:637 #, c-format msgid "%s: Not found in archive" msgstr "%s: 아카이브에 없음" # #: src/names.c:622 #, fuzzy, c-format msgid "%s: Required occurrence not found in archive" msgstr "%s: 아카이브에 없음" #: src/names.c:894 msgid "" "Using -C option inside file list is not allowed with --listed-incremental" msgstr "" #: src/names.c:900 msgid "Only one -C option is allowed with --listed-incremental" msgstr "" #: src/tar.c:81 #, c-format msgid "Options `-%s' and `-%s' both want standard input" msgstr "`-%s'과 `-%s' 옵션은 모두 표준 입력이 필요합니다" #: src/tar.c:158 #, fuzzy, c-format msgid "%s: Invalid archive format" msgstr "부적절한 날짜 형식 `%s'" #: src/tar.c:182 msgid "GNU features wanted on incompatible archive format" msgstr "" #: src/tar.c:250 #, c-format msgid "" "Unknown quoting style `%s'. Try `%s --quoting-style=help' to get a list." msgstr "" #: src/tar.c:347 msgid "" "GNU `tar' saves many files together into a single tape or disk archive, and " "can restore individual files from the archive.\n" "\n" "Examples:\n" " tar -cf archive.tar foo bar # Create archive.tar from files foo and bar.\n" " tar -tvf archive.tar # List all files in archive.tar verbosely.\n" " tar -xf archive.tar # Extract all files from archive.tar.\n" msgstr "" #: src/tar.c:356 msgid "" "The backup suffix is `~', unless set with --suffix or SIMPLE_BACKUP_SUFFIX.\n" "The version control may be set with --backup or VERSION_CONTROL, values " "are:\n" "\n" " none, off never make backups\n" " t, numbered make numbered backups\n" " nil, existing numbered if numbered backups exist, simple otherwise\n" " never, simple always make simple backups\n" msgstr "" #: src/tar.c:386 msgid "Main operation mode:" msgstr "" #: src/tar.c:389 msgid "list the contents of an archive" msgstr "" #: src/tar.c:391 msgid "extract files from an archive" msgstr "" # #: src/tar.c:394 #, fuzzy msgid "create a new archive" msgstr "아카이브에 예기치 않은 EOF" #: src/tar.c:396 msgid "find differences between archive and file system" msgstr "" #: src/tar.c:399 msgid "append files to the end of an archive" msgstr "" #: src/tar.c:401 msgid "only append files newer than copy in archive" msgstr "" #: src/tar.c:403 msgid "append tar files to an archive" msgstr "" #: src/tar.c:406 msgid "delete from the archive (not on mag tapes!)" msgstr "" #: src/tar.c:408 msgid "test the archive volume label and exit" msgstr "" #: src/tar.c:413 msgid "Operation modifiers:" msgstr "" #: src/tar.c:416 msgid "handle sparse files efficiently" msgstr "" #: src/tar.c:417 msgid "MAJOR[.MINOR]" msgstr "" #: src/tar.c:418 msgid "set version of the sparse format to use (implies --sparse)" msgstr "" #: src/tar.c:420 msgid "handle old GNU-format incremental backup" msgstr "" #: src/tar.c:422 msgid "handle new GNU-format incremental backup" msgstr "" #: src/tar.c:424 msgid "dump level for created listed-incremental archive" msgstr "" #: src/tar.c:426 msgid "do not exit with nonzero on unreadable files" msgstr "" #: src/tar.c:428 msgid "" "process only the NUMBERth occurrence of each file in the archive; this " "option is valid only in conjunction with one of the subcommands --delete, --" "diff, --extract or --list and when a list of files is given either on the " "command line or via the -T option; NUMBER defaults to 1" msgstr "" #: src/tar.c:434 msgid "archive is seekable" msgstr "" #: src/tar.c:436 msgid "archive is not seekable" msgstr "" #: src/tar.c:438 msgid "do not check device numbers when creating incremental archives" msgstr "" #: src/tar.c:441 msgid "check device numbers when creating incremental archives (default)" msgstr "" #: src/tar.c:447 msgid "Overwrite control:" msgstr "" #: src/tar.c:450 msgid "attempt to verify the archive after writing it" msgstr "" # #: src/tar.c:452 #, fuzzy msgid "remove files after adding them to the archive" msgstr "아카이브에 있는 이름들에서 드라이브 지정문을 제거함" #: src/tar.c:454 msgid "don't replace existing files when extracting" msgstr "" #: src/tar.c:456 msgid "don't replace existing files that are newer than their archive copies" msgstr "" #: src/tar.c:458 msgid "overwrite existing files when extracting" msgstr "" #: src/tar.c:460 msgid "remove each file prior to extracting over it" msgstr "" #: src/tar.c:462 msgid "empty hierarchies prior to extracting directory" msgstr "" #: src/tar.c:464 msgid "preserve metadata of existing directories" msgstr "" #: src/tar.c:466 msgid "overwrite metadata of existing directories when extracting (default)" msgstr "" #: src/tar.c:472 msgid "Select output stream:" msgstr "" #: src/tar.c:475 msgid "extract files to standard output" msgstr "" #: src/tar.c:476 src/tar.c:535 src/tar.c:537 tests/genfile.c:191 msgid "COMMAND" msgstr "" #: src/tar.c:477 msgid "pipe extracted files to another program" msgstr "" #: src/tar.c:479 msgid "ignore exit codes of children" msgstr "" #: src/tar.c:481 msgid "treat non-zero exit codes of children as error" msgstr "" #: src/tar.c:486 msgid "Handling of file attributes:" msgstr "" #: src/tar.c:489 msgid "force NAME as owner for added files" msgstr "" #: src/tar.c:491 msgid "force NAME as group for added files" msgstr "" #: src/tar.c:492 src/tar.c:689 msgid "DATE-OR-FILE" msgstr "" #: src/tar.c:493 msgid "set mtime for added files from DATE-OR-FILE" msgstr "" #: src/tar.c:494 msgid "CHANGES" msgstr "" #: src/tar.c:495 msgid "force (symbolic) mode CHANGES for added files" msgstr "" #: src/tar.c:497 msgid "METHOD" msgstr "" #: src/tar.c:498 msgid "" "preserve access times on dumped files, either by restoring the times after " "reading (METHOD='replace'; default) or by not setting the times in the first " "place (METHOD='system')" msgstr "" #: src/tar.c:502 msgid "don't extract file modified time" msgstr "" #: src/tar.c:504 msgid "" "try extracting files with the same ownership as exists in the archive " "(default for superuser)" msgstr "" #: src/tar.c:506 msgid "extract files as yourself (default for ordinary users)" msgstr "" #: src/tar.c:508 msgid "always use numbers for user/group names" msgstr "" #: src/tar.c:510 msgid "extract information about file permissions (default for superuser)" msgstr "" #: src/tar.c:514 msgid "" "apply the user's umask when extracting permissions from the archive (default " "for ordinary users)" msgstr "" #: src/tar.c:516 msgid "sort names to extract to match archive" msgstr "" #: src/tar.c:519 msgid "same as both -p and -s" msgstr "" #: src/tar.c:521 msgid "" "delay setting modification times and permissions of extracted directories " "until the end of extraction" msgstr "" #: src/tar.c:524 msgid "cancel the effect of --delay-directory-restore option" msgstr "" #: src/tar.c:529 msgid "Device selection and switching:" msgstr "" #: src/tar.c:531 msgid "ARCHIVE" msgstr "" #: src/tar.c:532 msgid "use archive file or device ARCHIVE" msgstr "" #: src/tar.c:534 msgid "archive file is local even if it has a colon" msgstr "" #: src/tar.c:536 msgid "use given rmt COMMAND instead of rmt" msgstr "" #: src/tar.c:538 msgid "use remote COMMAND instead of rsh" msgstr "" #: src/tar.c:542 msgid "specify drive and density" msgstr "" # #: src/tar.c:556 #, fuzzy msgid "create/list/extract multi-volume archive" msgstr "다중-볼륨 아카이브를 검증할 수 없습니다" #: src/tar.c:558 msgid "change tape after writing NUMBER x 1024 bytes" msgstr "" #: src/tar.c:560 msgid "run script at end of each tape (implies -M)" msgstr "" #: src/tar.c:563 msgid "use/update the volume number in FILE" msgstr "" #: src/tar.c:568 msgid "Device blocking:" msgstr "" #: src/tar.c:570 msgid "BLOCKS" msgstr "" #: src/tar.c:571 msgid "BLOCKS x 512 bytes per record" msgstr "" #: src/tar.c:573 msgid "NUMBER of bytes per record, multiple of 512" msgstr "" #: src/tar.c:575 msgid "ignore zeroed blocks in archive (means EOF)" msgstr "" #: src/tar.c:577 msgid "reblock as we read (for 4.2BSD pipes)" msgstr "" # #: src/tar.c:582 #, fuzzy msgid "Archive format selection:" msgstr "표준입력에 대한 아카이브" #: src/tar.c:584 tests/genfile.c:154 msgid "FORMAT" msgstr "" #: src/tar.c:585 msgid "create archive of the given format" msgstr "" #: src/tar.c:587 msgid "FORMAT is one of the following:" msgstr "" #: src/tar.c:588 msgid "old V7 tar format" msgstr "" #: src/tar.c:591 msgid "GNU format as per tar <= 1.12" msgstr "" #: src/tar.c:593 msgid "GNU tar 1.13.x format" msgstr "" #: src/tar.c:595 msgid "POSIX 1003.1-1988 (ustar) format" msgstr "" #: src/tar.c:597 msgid "POSIX 1003.1-2001 (pax) format" msgstr "" #: src/tar.c:598 msgid "same as pax" msgstr "" #: src/tar.c:601 msgid "same as --format=v7" msgstr "" #: src/tar.c:604 msgid "same as --format=posix" msgstr "" #: src/tar.c:605 msgid "keyword[[:]=value][,keyword[[:]=value]]..." msgstr "" #: src/tar.c:606 msgid "control pax keywords" msgstr "" #: src/tar.c:607 msgid "TEXT" msgstr "" #: src/tar.c:608 msgid "" "create archive with volume name TEXT; at list/extract time, use TEXT as a " "globbing pattern for volume name" msgstr "" #: src/tar.c:613 #, fuzzy msgid "Compression options:" msgstr "헷갈리는 압축 옵션" #: src/tar.c:615 #, fuzzy msgid "use archive suffix to determine the compression program" msgstr "압축 프로그램에 쓸 수 없습니다" #: src/tar.c:617 #, fuzzy msgid "do not use archive suffix to determine the compression program" msgstr "압축 프로그램에 쓸 수 없습니다" #: src/tar.c:619 msgid "PROG" msgstr "" #: src/tar.c:620 msgid "filter through PROG (must accept -d)" msgstr "" #: src/tar.c:636 msgid "Local file selection:" msgstr "" #: src/tar.c:639 msgid "add given FILE to the archive (useful if its name starts with a dash)" msgstr "" #: src/tar.c:640 msgid "DIR" msgstr "" # #: src/tar.c:641 #, fuzzy msgid "change to directory DIR" msgstr "%s로 디렉토리를 바꿀 수 없습니다" #: src/tar.c:643 msgid "get names to extract or create from FILE" msgstr "" #: src/tar.c:645 msgid "-T reads null-terminated names, disable -C" msgstr "" #: src/tar.c:647 msgid "disable the effect of the previous --null option" msgstr "" #: src/tar.c:649 msgid "unquote filenames read with -T (default)" msgstr "" #: src/tar.c:651 msgid "do not unquote filenames read with -T" msgstr "" #: src/tar.c:652 tests/genfile.c:137 msgid "PATTERN" msgstr "" #: src/tar.c:653 msgid "exclude files, given as a PATTERN" msgstr "" #: src/tar.c:655 msgid "exclude patterns listed in FILE" msgstr "" #: src/tar.c:657 msgid "" "exclude contents of directories containing CACHEDIR.TAG, except for the tag " "file itself" msgstr "" #: src/tar.c:660 msgid "exclude everything under directories containing CACHEDIR.TAG" msgstr "" #: src/tar.c:663 msgid "exclude directories containing CACHEDIR.TAG" msgstr "" #: src/tar.c:665 msgid "exclude contents of directories containing FILE, except for FILE itself" msgstr "" #: src/tar.c:668 msgid "exclude everything under directories containing FILE" msgstr "" #: src/tar.c:670 msgid "exclude directories containing FILE" msgstr "" #: src/tar.c:672 msgid "exclude version control system directories" msgstr "" #: src/tar.c:674 msgid "exclude backup and lock files" msgstr "" #: src/tar.c:676 msgid "avoid descending automatically in directories" msgstr "" #: src/tar.c:678 msgid "stay in local file system when creating archive" msgstr "" #: src/tar.c:680 msgid "recurse into directories (default)" msgstr "" # #: src/tar.c:682 #, fuzzy msgid "don't strip leading `/'s from file names" msgstr "절대 링크들에서 앞에 붙은 `/'를 제거함" #: src/tar.c:684 msgid "follow symlinks; archive and dump the files they point to" msgstr "" #: src/tar.c:686 msgid "follow hard links; archive and dump the files they refer to" msgstr "" #: src/tar.c:687 msgid "MEMBER-NAME" msgstr "" #: src/tar.c:688 msgid "begin at member MEMBER-NAME in the archive" msgstr "" #: src/tar.c:690 msgid "only store files newer than DATE-OR-FILE" msgstr "" #: src/tar.c:692 msgid "DATE" msgstr "" #: src/tar.c:693 msgid "compare date and time when data changed only" msgstr "" #: src/tar.c:694 msgid "CONTROL" msgstr "" #: src/tar.c:695 msgid "backup before removal, choose version CONTROL" msgstr "" #: src/tar.c:696 src/tar.c:773 src/tar.c:775 tests/genfile.c:170 msgid "STRING" msgstr "" #: src/tar.c:697 msgid "" "backup before removal, override usual suffix ('~' unless overridden by " "environment variable SIMPLE_BACKUP_SUFFIX)" msgstr "" #: src/tar.c:702 msgid "File name transformations:" msgstr "" #: src/tar.c:704 msgid "strip NUMBER leading components from file names on extraction" msgstr "" #: src/tar.c:706 msgid "EXPRESSION" msgstr "" #: src/tar.c:707 msgid "use sed replace EXPRESSION to transform file names" msgstr "" #: src/tar.c:713 msgid "File name matching options (affect both exclude and include patterns):" msgstr "" #: src/tar.c:716 msgid "ignore case" msgstr "" #: src/tar.c:718 msgid "patterns match file name start" msgstr "" #: src/tar.c:720 msgid "patterns match after any `/' (default for exclusion)" msgstr "" #: src/tar.c:722 msgid "case sensitive matching (default)" msgstr "" #: src/tar.c:724 msgid "use wildcards (default for exclusion)" msgstr "" #: src/tar.c:726 msgid "verbatim string matching" msgstr "" #: src/tar.c:728 #, fuzzy msgid "wildcards do not match `/'" msgstr "볼륨 `%s'가 `%s'와 일치하지 않습니다" #: src/tar.c:730 msgid "wildcards match `/' (default for exclusion)" msgstr "" #: src/tar.c:735 msgid "Informative output:" msgstr "" #: src/tar.c:738 msgid "verbosely list files processed" msgstr "" #: src/tar.c:739 msgid "KEYWORD" msgstr "" #: src/tar.c:740 msgid "warning control" msgstr "" #: src/tar.c:742 msgid "display progress messages every NUMBERth record (default 10)" msgstr "" #: src/tar.c:744 msgid "ACTION" msgstr "" #: src/tar.c:745 msgid "execute ACTION on each checkpoint" msgstr "" #: src/tar.c:748 msgid "print a message if not all links are dumped" msgstr "" #: src/tar.c:749 msgid "SIGNAL" msgstr "" #: src/tar.c:750 msgid "" "print total bytes after processing the archive; with an argument - print " "total bytes when this SIGNAL is delivered; Allowed signals are: SIGHUP, " "SIGQUIT, SIGINT, SIGUSR1 and SIGUSR2; the names without SIG prefix are also " "accepted" msgstr "" #: src/tar.c:755 msgid "print file modification dates in UTC" msgstr "" #: src/tar.c:757 msgid "send verbose output to FILE" msgstr "" #: src/tar.c:759 msgid "show block number within archive with each message" msgstr "" # #: src/tar.c:761 #, fuzzy msgid "ask for confirmation for every action" msgstr "사용자의 확인을 읽을 수 없습니다" #: src/tar.c:764 msgid "show tar defaults" msgstr "" #: src/tar.c:766 msgid "" "when listing or extracting, list each directory that does not match search " "criteria" msgstr "" #: src/tar.c:768 msgid "show file or archive names after transformation" msgstr "" #: src/tar.c:771 msgid "STYLE" msgstr "" #: src/tar.c:772 msgid "set name quoting style; see below for valid STYLE values" msgstr "" #: src/tar.c:774 msgid "additionally quote characters from STRING" msgstr "" #: src/tar.c:776 msgid "disable quoting for characters from STRING" msgstr "" #: src/tar.c:781 msgid "Compatibility options:" msgstr "" #: src/tar.c:784 msgid "" "when creating, same as --old-archive; when extracting, same as --no-same-" "owner" msgstr "" #: src/tar.c:789 msgid "Other options:" msgstr "" #: src/tar.c:792 msgid "disable use of some potentially harmful options" msgstr "" #: src/tar.c:927 #, fuzzy msgid "You may not specify more than one `-Acdtrux' or `--test-label' option" msgstr "`-Acdtrux' 옵션 중 하나 이상을 지정하면 안 됩니다" #: src/tar.c:937 msgid "Conflicting compression options" msgstr "헷갈리는 압축 옵션" #: src/tar.c:993 #, fuzzy, c-format msgid "Unknown signal name: %s" msgstr "알 수 없는 패턴 `%s'" #: src/tar.c:1017 msgid "Date sample file not found" msgstr "" #: src/tar.c:1025 #, c-format msgid "Substituting %s for unknown date format %s" msgstr "" #: src/tar.c:1054 #, c-format msgid "Option %s: Treating date `%s' as %s" msgstr "" #: src/tar.c:1132 #, c-format msgid "%s: file list already read" msgstr "" #: src/tar.c:1198 #, c-format msgid "%s: file name read contains nul character" msgstr "" #: src/tar.c:1265 src/tar.c:1269 src/tar.c:1273 src/tar.c:1277 src/tar.c:1281 #: src/tar.c:1285 #, c-format msgid "filter the archive through %s" msgstr "" #: src/tar.c:1290 msgid "Valid arguments for the --quoting-style option are:" msgstr "" #: src/tar.c:1294 msgid "" "\n" "*This* tar defaults to:\n" msgstr "" #: src/tar.c:1393 msgid "Invalid blocking factor" msgstr "" #: src/tar.c:1500 msgid "Invalid tape length" msgstr "" #: src/tar.c:1511 msgid "Invalid incremental level value" msgstr "" #: src/tar.c:1557 msgid "More than one threshold date" msgstr "" #: src/tar.c:1612 src/tar.c:1615 msgid "Invalid sparse version value" msgstr "" #: src/tar.c:1700 msgid "--atime-preserve='system' is not supported on this platform" msgstr "" #: src/tar.c:1725 msgid "--checkpoint value is not an integer" msgstr "" #: src/tar.c:1830 #, fuzzy msgid "Invalid group" msgstr "옵션에 부적절한 소유자가 주어짐" #: src/tar.c:1837 msgid "Invalid mode given on option" msgstr "옵션에 부적절한 모드가 주어짐" #: src/tar.c:1894 msgid "Invalid number" msgstr "" #: src/tar.c:1916 #, fuzzy msgid "Invalid owner" msgstr "옵션에 부적절한 소유자가 주어짐" #: src/tar.c:1946 msgid "" "The --preserve option is deprecated, use --preserve-permissions --preserve-" "order instead" msgstr "" #: src/tar.c:1956 #, fuzzy msgid "Invalid record size" msgstr "record_size로 부적절한 값" #: src/tar.c:1959 #, c-format msgid "Record size must be a multiple of %d." msgstr "레코드 크기는 %d의 배수가 되어야 합니다." #: src/tar.c:2000 msgid "Invalid number of elements" msgstr "" #: src/tar.c:2020 msgid "Only one --to-command option allowed" msgstr "" #: src/tar.c:2100 #, c-format msgid "Malformed density argument: %s" msgstr "" #: src/tar.c:2126 #, fuzzy, c-format msgid "Unknown density: `%c'" msgstr "알 수 없는 패턴 `%s'" #: src/tar.c:2143 #, c-format msgid "Options `-[0-7][lmh]' not supported by *this* tar" msgstr "`-[0-7][lmh]' 옵션은 이 tar에선 지원되지 않습니다" #: src/tar.c:2156 msgid "[FILE]..." msgstr "" #: src/tar.c:2274 #, c-format msgid "Old option `%c' requires an argument." msgstr "오래된 옵션 `%c'는 인수가 필요합니다." #: src/tar.c:2355 msgid "--occurrence is meaningless without a file list" msgstr "" #: src/tar.c:2361 msgid "--occurrence cannot be used in the requested operation mode" msgstr "" #: src/tar.c:2379 #, fuzzy msgid "Multiple archive files require `-M' option" msgstr "다중 아카이브 파일은 `-M' 옵션이 필요합니다" #: src/tar.c:2384 msgid "Cannot combine --listed-incremental with --newer" msgstr "" #: src/tar.c:2387 msgid "--level is meaningless without --listed-incremental" msgstr "" #: src/tar.c:2404 #, c-format msgid "%s: Volume label is too long (limit is %lu byte)" msgid_plural "%s: Volume label is too long (limit is %lu bytes)" msgstr[0] "" msgstr[1] "" # #: src/tar.c:2417 msgid "Cannot verify multi-volume archives" msgstr "다중-볼륨 아카이브를 검증할 수 없습니다" # #: src/tar.c:2419 msgid "Cannot verify compressed archives" msgstr "압축된 아카이브를 검증할 수 없습니다" # #: src/tar.c:2425 msgid "Cannot use multi-volume compressed archives" msgstr "압축된 다중-볼륨 아카이브를 사용할 수 없습니다" # #: src/tar.c:2431 #, fuzzy msgid "Cannot concatenate compressed archives" msgstr "압축된 아카이브를 갱신할 수 없습니다" #: src/tar.c:2443 msgid "--pax-option can be used only on POSIX archives" msgstr "" #: src/tar.c:2461 msgid "Volume length cannot be less than record size" msgstr "" #: src/tar.c:2464 msgid "--preserve-order is not compatible with --listed-incremental" msgstr "" #: src/tar.c:2475 msgid "Cowardly refusing to create an empty archive" msgstr "" #: src/tar.c:2501 msgid "Options `-Aru' are incompatible with `-f -'" msgstr "`-Aru' 옵션은 `-f -'과 동시에 쓸 수 없습니다" #: src/tar.c:2592 #, fuzzy msgid "You must specify one of the `-Acdtrux' or `--test-label' options" msgstr "`-Acdtrux' 옵션들 중 하나를 지정해야 합니다" #: src/tar.c:2646 #, c-format msgid "Exiting with failure status due to previous errors" msgstr "" # #: src/update.c:86 #, fuzzy, c-format msgid "%s: File shrank by %s byte" msgid_plural "%s: File shrank by %s bytes" msgstr[0] "%s: 파일이 %d 바이트 줄어듬, (와우!)" msgstr[1] "%s: 파일이 %d 바이트 줄어듬, (와우!)" #: src/xheader.c:163 #, c-format msgid "Keyword %s is unknown or not yet implemented" msgstr "" #: src/xheader.c:173 msgid "Time stamp is out of allowed range" msgstr "" #: src/xheader.c:204 #, c-format msgid "Pattern %s cannot be used" msgstr "" #: src/xheader.c:218 #, c-format msgid "Keyword %s cannot be overridden" msgstr "" #: src/xheader.c:541 msgid "Malformed extended header: missing length" msgstr "" #: src/xheader.c:549 msgid "Extended header length is out of allowed range" msgstr "" #: src/xheader.c:556 #, c-format msgid "Extended header length %*s is out of range" msgstr "" #: src/xheader.c:568 msgid "Malformed extended header: missing blank after length" msgstr "" #: src/xheader.c:576 msgid "Malformed extended header: missing equal sign" msgstr "" #: src/xheader.c:582 msgid "Malformed extended header: missing newline" msgstr "" #: src/xheader.c:620 #, c-format msgid "Ignoring unknown extended header keyword `%s'" msgstr "" #: src/xheader.c:830 #, c-format msgid "Generated keyword/value pair is too long (keyword=%s, length=%s)" msgstr "" #. TRANSLATORS: The first %s is the pax extended header keyword #. (atime, gid, etc.). #: src/xheader.c:862 #, c-format msgid "Extended header %s=%s is out of range %s..%s" msgstr "" #: src/xheader.c:993 src/xheader.c:1023 src/xheader.c:1337 #, c-format msgid "Malformed extended header: invalid %s=%s" msgstr "" #: src/xheader.c:1290 src/xheader.c:1315 src/xheader.c:1365 #, c-format msgid "Malformed extended header: excess %s=%s" msgstr "" #: src/xheader.c:1378 #, c-format msgid "Malformed extended header: invalid %s: unexpected delimiter %c" msgstr "" #: src/xheader.c:1388 #, c-format msgid "Malformed extended header: invalid %s: odd number of values" msgstr "" #: src/checkpoint.c:107 #, c-format msgid "%s: not a valid timeout" msgstr "" #: src/checkpoint.c:112 #, c-format msgid "%s: unknown checkpoint action" msgstr "" #: src/checkpoint.c:132 msgid "write" msgstr "" #: src/checkpoint.c:132 msgid "read" msgstr "" # #. TRANSLATORS: This is a ``checkpoint of write operation'', #. *not* ``Writing a checkpoint''. #. E.g. in Spanish ``Punto de comprobaci@'on de escritura'', #. *not* ``Escribiendo un punto de comprobaci@'on'' #: src/checkpoint.c:222 #, fuzzy, c-format msgid "Write checkpoint %u" msgstr "검사지점 %d를 씀" # #. TRANSLATORS: This is a ``checkpoint of read operation'', #. *not* ``Reading a checkpoint''. #. E.g. in Spanish ``Punto de comprobaci@'on de lectura'', #. *not* ``Leyendo un punto de comprobaci@'on'' #: src/checkpoint.c:228 #, fuzzy, c-format msgid "Read checkpoint %u" msgstr "검사지점 %d를 읽음" #: tests/genfile.c:112 #, fuzzy msgid "" "genfile manipulates data files for GNU paxutils test suite.\n" "OPTIONS are:\n" msgstr "GNU tar 시험 도구용 데이터 파일을 생성합니다.\n" #: tests/genfile.c:128 #, fuzzy msgid "File creation options:" msgstr "헷갈리는 압축 옵션" #: tests/genfile.c:129 tests/genfile.c:140 msgid "SIZE" msgstr "" #: tests/genfile.c:130 msgid "Create file of the given SIZE" msgstr "" #: tests/genfile.c:132 msgid "Write to file NAME, instead of standard output" msgstr "" #: tests/genfile.c:134 msgid "Read file names from FILE" msgstr "" #: tests/genfile.c:136 msgid "-T reads null-terminated names" msgstr "" #: tests/genfile.c:138 msgid "Fill the file with the given PATTERN. PATTERN is 'default' or 'zeros'" msgstr "" #: tests/genfile.c:141 msgid "Size of a block for sparse file" msgstr "" #: tests/genfile.c:143 msgid "Generate sparse file. Rest of the command line gives the file map." msgstr "" #: tests/genfile.c:145 msgid "OFFSET" msgstr "" #: tests/genfile.c:146 msgid "Seek to the given offset before writing data" msgstr "" #: tests/genfile.c:152 msgid "File statistics options:" msgstr "" #: tests/genfile.c:155 msgid "Print contents of struct stat for each given file. Default FORMAT is: " msgstr "" #: tests/genfile.c:162 msgid "Synchronous execution options:" msgstr "" #: tests/genfile.c:164 #, fuzzy msgid "OPTION" msgstr "" "\n" "사용법: %s [옵션]...\n" "\n" #: tests/genfile.c:165 msgid "" "Execute ARGS. Useful with --checkpoint and one of --cut, --append, --touch, " "--unlink" msgstr "" #: tests/genfile.c:168 msgid "Perform given action (see below) upon reaching checkpoint NUMBER" msgstr "" #: tests/genfile.c:171 msgid "Set date for next --touch option" msgstr "" #: tests/genfile.c:174 msgid "Display executed checkpoints and exit status of COMMAND" msgstr "" #: tests/genfile.c:179 msgid "" "Synchronous execution actions. These are executed when checkpoint number " "given by --checkpoint option is reached." msgstr "" #: tests/genfile.c:182 msgid "" "Truncate FILE to the size specified by previous --length option (or 0, if it " "is not given)" msgstr "" #: tests/genfile.c:186 msgid "Append SIZE bytes to FILE. SIZE is given by previous --length option." msgstr "" #: tests/genfile.c:189 #, fuzzy msgid "Update the access and modification times of FILE" msgstr "%s: 접근 시각과 수정 시각을 바꿀 수 없습니다" #: tests/genfile.c:192 msgid "Execute COMMAND" msgstr "" #: tests/genfile.c:195 msgid "Unlink FILE" msgstr "" #: tests/genfile.c:245 #, fuzzy, c-format msgid "Invalid size: %s" msgstr "부적절한 날짜 형식 `%s'" #: tests/genfile.c:250 #, c-format msgid "Number out of allowed range: %s" msgstr "" #: tests/genfile.c:253 #, c-format msgid "Negative size: %s" msgstr "" #: tests/genfile.c:266 tests/genfile.c:568 #, c-format msgid "stat(%s) failed" msgstr "" #: tests/genfile.c:269 #, c-format msgid "requested file length %lu, actual %lu" msgstr "" #: tests/genfile.c:273 #, c-format msgid "created file is not sparse" msgstr "" #: tests/genfile.c:362 #, c-format msgid "Error parsing number near `%s'" msgstr "" #: tests/genfile.c:368 #, fuzzy, c-format msgid "Unknown date format" msgstr "알 수 없는 시스템 오류" #: tests/genfile.c:392 msgid "[ARGS...]" msgstr "" # #: tests/genfile.c:429 tests/genfile.c:469 tests/genfile.c:522 #: tests/genfile.c:672 tests/genfile.c:686 #, fuzzy, c-format msgid "cannot open `%s'" msgstr "%s를 열 수 없습니다" # #: tests/genfile.c:435 #, fuzzy msgid "cannot seek" msgstr "%s를 실행할 수 없습니다" #: tests/genfile.c:452 #, c-format msgid "file name contains null character" msgstr "" #: tests/genfile.c:517 #, c-format msgid "cannot generate sparse files on standard output, use --file option" msgstr "" #: tests/genfile.c:595 #, c-format msgid "incorrect mask (near `%s')" msgstr "" #: tests/genfile.c:601 tests/genfile.c:634 #, fuzzy, c-format msgid "Unknown field `%s'" msgstr "알 수 없는 패턴 `%s'" # #: tests/genfile.c:661 #, fuzzy, c-format msgid "cannot set time on `%s'" msgstr "%s를 stat할 수 없습니다" # #: tests/genfile.c:700 #, fuzzy, c-format msgid "cannot unlink `%s'" msgstr "%s를 열 수 없습니다" #: tests/genfile.c:826 #, c-format msgid "Command exited successfully\n" msgstr "" #: tests/genfile.c:828 #, c-format msgid "Command failed with status %d\n" msgstr "" #: tests/genfile.c:832 #, c-format msgid "Command terminated on signal %d\n" msgstr "" #: tests/genfile.c:834 #, c-format msgid "Command stopped on signal %d\n" msgstr "" #: tests/genfile.c:837 #, c-format msgid "Command dumped core\n" msgstr "" #: tests/genfile.c:840 #, c-format msgid "Command terminated\n" msgstr "" #: tests/genfile.c:872 #, c-format msgid "--stat requires file names" msgstr "" # #~ msgid "Reading %s\n" #~ msgstr "%s를 읽는 중\n" # #~ msgid "rmtd: Cannot allocate buffer space\n" #~ msgstr "rmtd: 버퍼 공간을 할당할 수 없습니다\n" # #~ msgid "Cannot allocate buffer space" #~ msgstr "버퍼 공간을 할당할 수 없습니다" # #~ msgid "Try `%s --help' for more information.\n" #~ msgstr "더 많은 정보를 보려면 `%s --help' 하십시오.\n" # #~ msgid "Premature end of file" #~ msgstr "잘못된 파일 끝" #~ msgid "Cannot close file #%d" #~ msgstr "파일 #%d를 닫을 수 없습니다" # #~ msgid "Cannot close descriptor %d" #~ msgstr "기술자 %d를 닫을 수 없습니다" #~ msgid "Cannot properly duplicate %s" #~ msgstr "%s를 제대로 복사할 수 없습니다" # #~ msgid "Cannot use compressed or remote archives" #~ msgstr "압축된 아카이브나 원격 아카이브를 사용할 수 없습니다" #~ msgid "Cannot open pipe" #~ msgstr "파이프를 열 수 없습니다" # #~ msgid "Cannot fork" #~ msgstr "fork할 수 없습니다" #~ msgid "tar (child)" #~ msgstr "tar (자식)" # #~ msgid "(child) Pipe to stdin" #~ msgstr "(자식) 표준입력에 대한 파이프" # #~ msgid "Cannot open archive %s" #~ msgstr "%s 아카이브를 열 수 없습니다" # #~ msgid "Archive to stdout" #~ msgstr "표준출력에 대한 아카이브" # #~ msgid "Child cannot fork" #~ msgstr "자식은 fork할 수 없습니다" # #~ msgid "((child)) Pipe to stdout" #~ msgstr "((자식)) 표준출력에 대한 파이프" #~ msgid "tar (grandchild)" #~ msgstr "tar (손자)" #~ msgid "(grandchild) Pipe to stdin" #~ msgstr "(손자) 표준입력에 대한 파이프" # #~ msgid "Cannot read from compression program" #~ msgstr "압축 프로그램으로부터 읽어들일 수 없습니다" # #~ msgid "(child) Pipe to stdout" #~ msgstr "(자식) 표준출력에 대한 파이프" # #~ msgid "((child)) Pipe to stdin" #~ msgstr "((자식)) 표준입력에 대한 파이프" #~ msgid "(grandchild) Pipe to stdout" #~ msgstr "(손자) 표준출력에 대한 파이프" # #~ msgid "Could not allocate memory for blocking factor %d" #~ msgstr "블럭 계수 %d에 대응하는 메모리를 할당할 수 없습니다" # #~ msgid "Only wrote %u of %u bytes to %s" #~ msgstr "%u 바이트(%u 바이트 중)만 %s에 썼습니다" # #~ msgid "WARNING: No volume header" #~ msgstr "경고: 볼륨 헤더 없음" # #~ msgid "Only read %d bytes from archive %s" #~ msgstr "%d 바이트만 아카이브 %s에서 읽었습니다" # #~ msgid "WARNING: Cannot close %s (%d, %d)" #~ msgstr "경고: %s를 닫을 수 없습니다 (%d, %d)" # #~ msgid "Child died with signal %d%s" #~ msgstr "자식이 신호 %d%s와 함께 죽었음" # #~ msgid "Child returned status %d" #~ msgstr "자식이 상태 %d를 되돌려 주었습니다" # #~ msgid "Cannot fork!" #~ msgstr "fork할 수 없습니다!" # #~ msgid "Cannot exec a shell %s" #~ msgstr "%s 셸을 실행할 수 없습니다" #~ msgid "Removing leading `/' from absolute path names in the archive" #~ msgstr "아카이브 안에 있는 절대 경로명에서 앞에 붙은 `/'를 제거함" # #~ msgid "Wrote %ld of %ld bytes to file %s" #~ msgstr "%ld 바이트(%ld 바이트 중)를 파일 %s에 썼습니다" # #~ msgid "Amount actually written is (I hope) %d.\n" #~ msgstr "실제로 쓰여진 양은 (바라건대) %d입니다.\n" # #~ msgid "Cannot add file %s" #~ msgstr "파일 %s를 추가할 수 없습니다" # #~ msgid "Cannot add directory %s" #~ msgstr "%s 디렉토리를 추가할 수 없습니다" # #~ msgid "Cannot open directory %s" #~ msgstr "%s 디렉토리를 열 수 없습니다" # #~ msgid "File name %s%s too long" #~ msgstr "파일 이름 %s%s는 너무 깁니다" # #~ msgid "Could not allocate memory for diff buffer of %d bytes" #~ msgstr "%d 바이트의 diff 버퍼에 메모리를 할당할 수 없습니다" # #~ msgid "Cannot read %s" #~ msgstr "%s를 읽을 수 없습니다" # #~ msgid "Data differs" #~ msgstr "자료가 다릅니다" # #~ msgid "File does not exist" #~ msgstr "파일이 존재하지 않습니다" # #~ msgid "Not a regular file" #~ msgstr "일반적인 파일이 아님" # #~ msgid "Error while closing %s" #~ msgstr "%s를 닫는 동안 오류 발생" # #~ msgid "Does not exist" #~ msgstr "가 존재하지 않습니다" # #~ msgid "No such file or directory" #~ msgstr "그런 파일이나 디렉토리가 없음" # #~ msgid "Mode or device-type changed" #~ msgstr "모드 또는 장치 타입이 변경됨" # #~ msgid "No longer a directory" #~ msgstr "더 이상 디렉토리가 아님" # #~ msgid "Cannot open file %s" #~ msgstr "%s 파일을 열 수 없습니다" # #, fuzzy #~ msgid "Cannot seek to %ld in file %s" #~ msgstr "파일 %s의 %ld까지 탐색할 수 없습니다" # #~ msgid "Could not rewind archive file for verify" #~ msgstr "검증을 위해 아카이브 파일을 되감을 수 없습니다" # #~ msgid "Could not re-position archive file" #~ msgstr "아카이브 파일을 재위치시킬 수 없습니다" #~ msgid "%s: Cannot lchown to uid %d gid %d" #~ msgstr "%s: 소유자를 uid %d gid %d로 바꿀 수 없습니다" #~ msgid "%s: Cannot chown to uid %d gid %d" #~ msgstr "%s: 소유자를 uid %d gid %d로 바꾸었습니다" #~ msgid "%s: Could not write to file" #~ msgstr "%s: 파일에 쓸 수 없습니다" #~ msgid "%s: Could not create file" #~ msgstr "%s: 파일을 만들 수 없습니다" #~ msgid "%s: Error while closing" #~ msgstr "%s: 닫는 동안 오류 발생" #~ msgid "%s: Could not link to `%s'" #~ msgstr "%s: `%s'에 링크할 수 없습니다" #~ msgid "%s: Could not make node" #~ msgstr "%s: 노드를 만들 수 없습니다" #~ msgid "%s: Could not make fifo" #~ msgstr "%s: fifo를 만들 수 없습니다" #~ msgid "%s: Could not create directory" #~ msgstr "%s: 디렉토리를 만들 수 없습니다" # #~ msgid "Added write and execute permission to directory %s" #~ msgstr "%s 디렉토리에 쓰기와 실행 권한을 부가했습니다" # #~ msgid "Visible long name error" #~ msgstr "가시적인 긴 이름 오류" # #~ msgid "Could not get current directory: %s" #~ msgstr "현재 디렉토리를 알 수 없습니다: %s" # #~ msgid "File name %s/%s too long" #~ msgstr "파일 이름 %s/%s는 너무 깁니다" # #~ msgid "Cannot chdir to %s" #~ msgstr "%s로 디렉토리를 바꿀 수 없습니다" # #~ msgid "Error while deleting %s" #~ msgstr "%s를 지우는 동안 오류 발생" # #~ msgid "Hmm, this doesn't look like a tar archive" #~ msgstr "흠, 이것은 tar 아카이브처럼 보이지 않는군요" # #~ msgid "Skipping to next file header" #~ msgstr "다음 파일 헤더로 건너 뜀" # #~ msgid "EOF in archive file" #~ msgstr "아카이브 파일에 EOF" # #~ msgid "Only wrote %ld of %ld bytes to file %s" #~ msgstr "%ld 바이트(%ld 바이트 중)만 파일 %s에 썼습니다" # #~ msgid "Visible longname error" #~ msgstr "가시적인 긴이름 오류" # #~ msgid "Cannot symlink %s to %s" #~ msgstr "%s를 %s로 기호링크할 수 없습니다" # #~ msgid "Symlinked %s to %s" #~ msgstr "%s에서 %s로 기호링크되었음" # #~ msgid "Missing file name after -C" #~ msgstr "-C 뒤에 파일 이름이 빠졌음" # #~ msgid "rmtd: Garbage command %c\n" #~ msgstr "rmtd: 쓸모없는 명령 %c\n" # #~ msgid "" #~ "\n" #~ "Usage: %s [OPTION]... [FILE]...\n" #~ msgstr "" #~ "\n" #~ "사용법: %s [옵션]... [파일]...\n" #~ msgid "" #~ "\n" #~ "Main operation mode:\n" #~ " -t, --list list the contents of an archive\n" #~ " -x, --extract, --get extract files from an archive\n" #~ " -c, --create create a new archive\n" #~ " -d, --diff, --compare find differences between archive and file " #~ "system\n" #~ " -r, --append append files to the end of an archive\n" #~ " -u, --update only append files newer than copy in archive\n" #~ " -A, --catenate append tar files to an archive\n" #~ " --concatenate same as -A\n" #~ " --delete delete from the archive (not on mag tapes!)\n" #~ msgstr "" #~ "\n" #~ "주요 동작 모드:\n" #~ " -t, --list 아카이브의 내용물을 출력합니다\n" #~ " -x, --extract, --get 아카이브에서 파일을 추출합니다\n" #~ " -c, --create 새로운 아카이브를 만듭니다\n" #~ " -d, --diff, --compare 아카이브와 파일 시스템간의 차이점을 비교합니다\n" #~ " -r, --append 아카이브 끝에 파일을 추가합니다\n" #~ " -u, --update 아카이브 안의 것보다 새로운 파일만 추가합니다\n" #~ " -A, --catenate 아카이브에 tar 파일을 추가합니다\n" #~ " --concatenate -A와 같음\n" #~ " --delete 아카이브로부터 제거합니다 (자기 테이프에선 안" #~ "됨!)\n" #~ msgid "" #~ "\n" #~ "Operation modifiers:\n" #~ " -W, --verify attempt to verify the archive after writing " #~ "it\n" #~ " --remove-files remove files after adding them to the " #~ "archive\n" #~ " -k, --keep-old-files don't overwrite existing files when " #~ "extracting\n" #~ " -U, --unlink-first remove each file prior to extracting over " #~ "it\n" #~ " --recursive-unlink empty hierarchies prior to extracting " #~ "directory\n" #~ " -S, --sparse handle sparse files efficiently\n" #~ " -O, --to-stdout extract files to standard output\n" #~ " -G, --incremental handle old GNU-format incremental backup\n" #~ " -g, --listed-incremental handle new GNU-format incremental backup\n" #~ " --ignore-failed-read do not exit with nonzero on unreadable " #~ "files\n" #~ msgstr "" #~ "\n" #~ "동작 변경자:\n" #~ " -W, --verify 아카이브를 기록한 다음 검증하도록 합니다\n" #~ " --remove-files 아카이브에 파일을 추가한 다음 지웁니다\n" #~ " -k, --keep-old-files 추출할 때 이미 존재하는 파일을 덮어쓰지 않습" #~ "니다\n" #~ " -U, --unlink-first 추출하기에 앞서 대상 파일을 지웁니다\n" #~ " --recursive-unlink 디렉토리를 추출하기에 앞서 그 체계를 비웁니" #~ "다\n" #~ " -S, --sparse 스파스 파일을 효율적으로 처리합니다\n" #~ " -O, --to-stdout 표준 출력으로 파일을 추출합니다\n" #~ " -G, --incremental 오래된 GNU 형식의 점진적 백업 파일을 처리합니" #~ "다\n" #~ " -g, --listed-incremental 새로운 GNU 형식의 점진적 백업 파일을 처리합니" #~ "다\n" #~ " --ignore-failed-read 읽을 수 없는 파일에 대해 영 아닌 값으로 종료" #~ "하지\n" #~ " 않습니다\n" #~ msgid "" #~ "\n" #~ "Device selection and switching:\n" #~ " -f, --file=ARCHIVE use archive file or device ARCHIVE\n" #~ " --force-local archive file is local even if has a " #~ "colon\n" #~ " --rsh-command=COMMAND use remote COMMAND instead of rsh\n" #~ " -[0-7][lmh] specify drive and density\n" #~ " -M, --multi-volume create/list/extract multi-volume " #~ "archive\n" #~ " -L, --tape-length=NUM change tape after writing NUM x 1024 " #~ "bytes\n" #~ " -F, --info-script=FILE run script at end of each tape (implies -" #~ "M)\n" #~ " --new-volume-script=FILE same as -F FILE\n" #~ " --volno-file=FILE use/update the volume number in FILE\n" #~ msgstr "" #~ "\n" #~ "장치 선택과 전환:\n" #~ " -f, --file=ARCHIVE 아카이브 파일 또는 ARCHIVE 장치를 사용합" #~ "니다\n" #~ " --force-local 이름에 콜론이 있는 아카이브 파일도 지역 " #~ "파일로\n" #~ " 인식합니다\n" #~ " --rsh-command=COMMAND rsh 대신 원격 COMMAND를 사용합니다\n" #~ " -[0-7][lmh] 드라이브와 기록 밀도를 지정합니다\n" #~ " -M, --multi-volume 다중 볼륨 아카이브를 생성/출력/추출합니" #~ "다\n" #~ " -L, --tape-length=NUM NUM x 1024 바이트를 쓴 뒤에 테이프를 바꿉" #~ "니다\n" #~ " -F, --info-script=FILE 각 테이프의 끝에서 스크립트를 실행합니" #~ "다\n" #~ " (-M을 포함함)\n" #~ " --new-volume-script=FILE -F FILE과 같음\n" #~ " --volno-file=FILE FILE 안에 있는 볼륨 번호를 사용/갱신합니" #~ "다\n" #~ msgid "" #~ "\n" #~ "Device blocking:\n" #~ " -b, --blocking-factor=BLOCKS BLOCKS x 512 bytes per record\n" #~ " --record-size=SIZE SIZE bytes per record, multiple of 512\n" #~ " -i, --ignore-zeros ignore zeroed blocks in archive (means " #~ "EOF)\n" #~ " -B, --read-full-records reblock as we read (for 4.2BSD pipes)\n" #~ msgstr "" #~ "\n" #~ "장치 블럭 설정:\n" #~ " -b, --blocking-factor=BLOCK 레코드당 BLOCK x 512 바이트\n" #~ " --record-size=SIZE 레코드당 SIZE 바이트, 512의 배수\n" #~ " -i, --ignore-zeros 아카이브에서 영으로 된 블럭을 무시합니" #~ "다\n" #~ " (EOF를 의미함)\n" #~ " -B, --read-full-records 읽은 것을 재블럭화합니다 (4.2BSD 파이프용" #~ "으로)\n" #, fuzzy #~ msgid "" #~ "\n" #~ "Archive format selection:\n" #~ " -V, --label=NAME create archive with volume name " #~ "NAME\n" #~ " PATTERN at list/extract time, a globbing " #~ "PATTERN\n" #~ " -o, --old-archive, --portability write a V7 format archive\n" #~ " --posix write a POSIX conformant archive\n" #~ " -z, --gzip, --ungzip filter the archive through gzip\n" #~ " -Z, --compress, --uncompress filter the archive through compress\n" #~ " --use-compress-program=PROG filter through PROG (must accept -" #~ "d)\n" #~ msgstr "" #~ "\n" #~ "아카이브 형식 선택:\n" #~ " -V, --label=NAME 볼륨명이 NAME인 아카이브를 만듭니다\n" #~ " PATTERN at list/extract time, a globbing " #~ "PATTERN\n" #~ " -o, --old-archive, --portability V7 형식의 아카이브를 씁니다\n" #~ " --posix POSIX를 따르는 아카이브를 씁니다\n" #~ " -z, --gzip, --ungzip 아카이브를 gzip에 여과합니다\n" #~ " -Z, --compress, --uncompress 아카이브를 compress에 여과합니다\n" #~ " --use-compress-program=PROG PROG(-d를 인식해야 함)에 여과합니다\n" #~ msgid "" #~ " -N, --newer=DATE only store files newer than DATE\n" #~ " --newer-mtime compare date and time when data changed " #~ "only\n" #~ " --after-date=DATE same as -N\n" #~ msgstr "" #~ " -N, --newer=DATE DATE 이후의 파일들만 저장합니다\n" #~ " --newer-mtime 데이터가 바뀌었을 때만 날짜와 시간을 비교합" #~ "니다\n" #~ " --after-date=DATE -N과 같음\n" #~ msgid "" #~ "\n" #~ "Informative output:\n" #~ " --help print this help, then exit\n" #~ " --version print tar program version number, then exit\n" #~ " -v, --verbose verbosely list files processed\n" #~ " --checkpoint print directory names while reading the archive\n" #~ " --totals print total bytes written while creating archive\n" #~ " -R, --block-number show block number within archive with each " #~ "message\n" #~ " -w, --interactive ask for confirmation for every action\n" #~ " --confirmation same as -w\n" #~ msgstr "" #~ "\n" #~ "정보 출력에 관한 옵션:\n" #~ " --help 이 도움말을 인쇄하고 끝냅니다\n" #~ " --version tar 프로그램의 버전 번호를 인쇄하고 끝냅니다\n" #~ " -v, --verbose 처리되는 파일을 순서대로 출력합니다\n" #~ " --checkpoint 아카이브를 읽을 동안 디렉토리 이름을 인쇄합니다\n" #~ " --totals 아카이브를 만들 동안 쓰여진 총 바이트 수를 인쇄합" #~ "니다\n" #~ " -R, --block-number 각 메시지마다 아카이브내의 블럭 번호를 표시합니" #~ "다\n" #~ " -w, --interactive 모든 행동에 대해 확인을 요구합니다\n" #~ " --confirmation -w와 같음\n" #~ msgid "" #~ "\n" #~ "GNU tar cannot read nor produce `--posix' archives. If POSIXLY_CORRECT\n" #~ "is set in the environment, GNU extensions are disallowed with `--posix'.\n" #~ "Support for POSIX is only partially implemented, don't count on it yet.\n" #~ "ARCHIVE may be FILE, HOST:FILE or USER@HOST:FILE; and FILE may be a file\n" #~ "or a device. *This* `tar' defaults to `-f%s -b%d'.\n" #~ msgstr "" #~ "\n" #~ "GNU tar는 `--posix' 아카이브를 읽거나 만들어 낼 수 없습니다. 만약\n" #~ "POSIXLY_CORRECT가 환경에서 설정되어 있다면, GNU 확장은 `--posix'을 통해\n" #~ "비활성화됩니다. POSIX 지원은 겨우 부분적으로만 구현되었으므로 아직 신뢰\n" #~ "하지는 마십시오. ARCHIVE는 FILE, HOST:FILE, 또는 USER@HOST:FILE이 될 수\n" #~ "있으며, 여기서 FILE은 파일이나 장치가 될 수 있습니다. 이 `tar'의\n" #~ "내정값은 `-f%s -b%d'입니다.\n" #~ msgid "Obsolete option, now implied by --blocking-factor" #~ msgstr "--blocking-factor에 포함되어 쓸모없게 된 옵션" #~ msgid "Obsolete option name replaced by --blocking-factor" #~ msgstr "--block-factor로 대체되어 쓸모없게 된 옵션 이름" #~ msgid "Obsolete option name replaced by --read-full-records" #~ msgstr "--read-full-records로 대체되어 쓸모없게 된 옵션 이름" #~ msgid "Obsolete option name replaced by --touch" #~ msgstr "--touch로 대체되어 쓸모없게 된 옵션 이름" #~ msgid "Conflicting archive format options" #~ msgstr "헷갈리는 아카이브 형식 옵션" #~ msgid "Obsolete option name replaced by --absolute-names" #~ msgstr "--absolute-names로 대체되어 쓸모없게 된 옵션 이름" #~ msgid "Obsolete option name replaced by --block-number" #~ msgstr "--block-number로 대체되어 쓸모없게 된 옵션 이름" #~ msgid "Obsolete option name replaced by --backup" #~ msgstr "--backup으로 대체되어 쓸모없게 된 옵션 이름" #~ msgid "Invalid group given on option" #~ msgstr "옵션에 부적절한 그룹이 주어짐" #~ msgid "" #~ "\n" #~ "Copyright (C) 1988, 92, 93, 94, 95, 96, 97 Free Software Foundation, " #~ "Inc.\n" #~ msgstr "" #~ "\n" #~ "저작권 (C) 1988, 92, 93, 94, 95, 96, 97 Free Software Foundation, Inc.\n" #~ msgid "" #~ "\n" #~ "Written by John Gilmore and Jay Fenlason.\n" #~ msgstr "" #~ "\n" #~ "John Gilmore와 Jay Fenlason이 만들었습니다.\n" #~ msgid "" #~ "If a long option shows an argument as mandatory, then it is mandatory\n" #~ "for the equivalent short option also.\n" #~ "\n" #~ " -l, --file-length=LENGTH LENGTH of generated file\n" #~ " -p, --pattern=PATTERN PATTERN is `default' or `zeros'\n" #~ " --help display this help and exit\n" #~ " --version output version information and exit\n" #~ msgstr "" #~ "긴 옵션에 부가되는 인수가 있을 때, 이는 동일한 의미의 짧은 옵션에도\n" #~ "적용됩니다.\n" #~ "\n" #~ " -l, --file-length=길이 생성되는 파일의 길이\n" #~ " -p, --pattern=패턴 패턴은 `default'나 `zeros'입니다\n" #~ " --help 이 도움말을 보여주고 마칩니다\n" #~ " --version 버전 정보를 출력하고 마칩니다\n" #~ msgid "" #~ "\n" #~ "Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.\n" #~ msgstr "" #~ "\n" #~ "저작권 (C) 1995, 1996, 1997 Free Software Foundation, Inc.\n" # fake msgid -ke- #~ msgid "" #~ "\n" #~ "Written by Fran,cois Pinard .\n" #~ msgstr "" #~ "\n" #~ "Fran,cois Pinard 가 만들었습니다.\n"