1 | |
---|
2 | PSD_install options:" /O1 /SMP /APIC /R" @#netlabs dot org:3.6a#@ACPI core PSD D |
---|
3 | river. (c) netlabs.org 2005-2008 Build date: Jan 31 2008 13:19:44 |
---|
4 | MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 |
---|
5 | New Stack = FFD00000 Size:0x8000 |
---|
6 | PSD_INIT ESP=0xFFCFFFE0 |
---|
7 | AcpiOsInitialize ALLOC size 65536 at 0xF8DE0000 |
---|
8 | AcpiOsInitialize MapMem size 4096 at 0xFFE9E000 |
---|
9 | AcpiOsCreateLock 8 |
---|
10 | AcpiOsCreateLock 0 |
---|
11 | AcpiOsPredefinedOverride: "_REV" |
---|
12 | AcpiOsPredefinedOverride: "_OS_" |
---|
13 | AcpiOsPredefinedOverride: override to eComStation |
---|
14 | AcpiOsPredefinedOverride: "_GL_" |
---|
15 | AcpiOsCreateSemaphore: O.K. Handle=0xF8DE03F8 M:1 I:0 |
---|
16 | AcpiOsPredefinedOverride: "_OSI" |
---|
17 | AcpiOsPredefinedOverride: override to eCS |
---|
18 | *** AcpiInitializeSubsystem Status = 0 *** |
---|
19 | ACPI: RSDP @ 0xFAA60/0x14 (v0 ACPIAM) |
---|
20 | ACPI: RSDT @ 0x7FFB0000/0x3C (v1 122407 RSDT1648 0x20071224 MSFT 0x97) |
---|
21 | ACPI: FACP @ 0x7FFB0200/0x84 (v2 122407 FACP1648 0x20071224 MSFT 0x97) |
---|
22 | ACPI: DSDT @ 0x7FFB0440/0x71E2 (v1 1ADSL 1ADSL000 0x0 INTL 0x20051117) |
---|
23 | ACPI: FACS @ 0x7FFBE000/0x40 |
---|
24 | ACPI: APIC @ 0x7FFB0390/0x6C (v1 122407 APIC1648 0x20071224 MSFT 0x97) |
---|
25 | ACPI: MCFG @ 0x7FFB0400/0x3C (v1 122407 OEMMCFG 0x20071224 MSFT 0x97) |
---|
26 | ACPI: OEMB @ 0x7FFBE040/0x71 (v1 122407 OEMB1648 0x20071224 MSFT 0x97) |
---|
27 | ACPI: HPET @ 0x7FFB7630/0x38 (v1 122407 OEMHPET 0x20071224 MSFT 0x97) |
---|
28 | ACPI: SSDT @ 0x7FFB7670/0x28A (v1 A M I POWERNOW 0x1 AMD 0x1) |
---|
29 | *** AcpiInitializeTables Status = 0 *** |
---|
30 | AcpiOsTableOverride Ex:FFCDB440 New:FFCFFFAC SIG:[DSDT] |
---|
31 | tbxface-619 [2] TbLoadNamespace: ACPI Tables successfully acquired |
---|
32 | *** AcpiLoadTables Status = 0 *** |
---|
33 | Table [DSDT] |
---|
34 | Table [FACS] |
---|
35 | Table [FACP] |
---|
36 | Table [APIC] |
---|
37 | Local APIC address: FEE00000h |
---|
38 | System also has 8259 |
---|
39 | APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable |
---|
40 | APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable |
---|
41 | APIC_PROCESSOR: ProcID 3h LocalApicID 82h - not usable |
---|
42 | APIC_PROCESSOR: ProcID 4h LocalApicID 83h - not usable |
---|
43 | APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 |
---|
44 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spe |
---|
45 | c Trigger by: Bus spec |
---|
46 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Low 1 T |
---|
47 | rigger by: Level |
---|
48 | Table [MCFG] |
---|
49 | Table [OEMB] |
---|
50 | Table [HPET] |
---|
51 | Table [SSDT] |
---|
52 | Size of FACDT 244 |
---|
53 | Type of computer - Unspecified |
---|
54 | System vector the SCI interrupt is wired to in 8259 mode. 9 |
---|
55 | System port address of the SMI Command Port 0xB0 |
---|
56 | The value to write to SMI_CMD to disable SMI 0xE1 |
---|
57 | The value to write to SMI_CMD to re-enable SMI 0x1E |
---|
58 | The value to write to SMI_CMD to enter the S4BIOS state 0x0 |
---|
59 | System port address of the PM1a Event Register Block 800 |
---|
60 | System port address of the PM1b Event Register Block 0 |
---|
61 | Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 |
---|
62 | System port address of the PM1a Control Register Block 804 |
---|
63 | System port address of the PM1b Control Register Block 0 |
---|
64 | Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 |
---|
65 | System port address of the PM2 Control Register Block 8FF |
---|
66 | Number of bytes decoded by PM2_CNT_BLK 1 |
---|
67 | System port address of the Power Management Timer Control Register Block 808 |
---|
68 | Number of bytes decoded by PM_TMR_BLK (=4) 4 |
---|
69 | System port address of General-Purpose Event 0 Register Block 820 |
---|
70 | System port address of General-Purpose Event 1 Register Block 0 |
---|
71 | Number of bytes decoded by GPE0_BLK 0x8 |
---|
72 | Number of bytes decoded by GPE1_BLK 0x0 |
---|
73 | Offset within the ACPI general-purpose event model where GPE1 based events start |
---|
74 | 0 |
---|
75 | GPE enable register: 0: 0: 0: 0 |
---|
76 | GPE status register: 0: 0: 0: 40 |
---|
77 | The system does not support a C2 state. 65 |
---|
78 | The system does not support a C3 state 3E9 |
---|
79 | The zero-based index of where the processor's duty cycle setting is within the p |
---|
80 | rocessor's P_CNT register 4 |
---|
81 | The bit width of the processor's duty cycle setting value in the P_CNT register |
---|
82 | 3 |
---|
83 | The RTC CMOS RAM index to the day-of-month alarm value 13 |
---|
84 | The RTC CMOS RAM index to the century of data value (hundred and thousand year d |
---|
85 | ecimals) 50 |
---|
86 | IA-PC Boot Architecture Flags 0x0 |
---|
87 | Fixed feature flags 1C1A5 |
---|
88 | The reset register: |
---|
89 | Type of address space - System I/O |
---|
90 | Register Bit Width 8 |
---|
91 | Register Bit Offset 0 |
---|
92 | Access size 0 |
---|
93 | Address 3321 |
---|
94 | The value to write to the RESET_REG port to reset the system 6 |
---|
95 | ***** Throttl Width 3 Offset 4 |
---|
96 | evxfevnt-176 [2] Enable: Transition to ACPI mode successful |
---|
97 | evgpeblk-1111 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x9 |
---|
98 | AcpiOsInstallIntterrupHandler IRQ9 handler F8E6E9ED |
---|
99 | evgpeblk-1211 [3] EvInitializeGpeBlock: Found 6 Wake, Enabled 11 Runtime GPEs in |
---|
100 | this block |
---|
101 | ************ AcpiEnableSubsystem Status = 0 |
---|
102 | ************ Scan EC Status = 0 |
---|
103 | Completing Region/Field/Buffer/Package initialization:.......................... |
---|
104 | ................................................................................ |
---|
105 | ..................... |
---|
106 | Initialized 15/23 Regions 30/30 Fields 36/36 Buffers 46/48 Packages (921 nodes) |
---|
107 | Initializing Device/Processor/Thermal objects by executing _INI methods:.. |
---|
108 | Executed 2 _INI methods requiring 0 _STA executions (examined 71 objects) |
---|
109 | ************ AcpiInitializeObjects mask:0 Status = 0 |
---|
110 | Processor [P001] |
---|
111 | Processor [P002] |
---|
112 | Processor [P003] |
---|
113 | Processor [P004] |
---|
114 | Status 0x0 0 |
---|
115 | ************ AcpiInstallNotifyHandler System Status = 0 |
---|
116 | ************ AcpiInstallNotifyHandler Device Status = 0 |
---|
117 | |
---|
118 | Init ACPI rc=0 |
---|
119 | APIC0 phys FEC00000 lin: FFDF1000 APIC ID 2000000 (178021) Ver 21 MaxIO entry 0x |
---|
120 | 17 (2000000) Arbitration ID 2 set to (2000000) 2 Id (2000000) 2 |
---|
121 | Set 24 lines from IRQ0 |
---|
122 | =========== Status set APIC mode 0x0 |
---|
123 | Current IRQs line 24 |
---|
124 | IRQ0 override to IRQ2 Vector:50 Line:2 |
---|
125 | IRQ9 override to IRQ9 Vector:71 Line:9 |
---|
126 | WakeupVector Lin: FFDED000 |
---|
127 | WakeupVector Lin: FFDED000 Phys: 63000 IPIStack:FFDEB000 s_cpu:0 |
---|
128 | GetWakeupVector Status = 0 |
---|
129 | PIC Mask:FFFFDFFB |
---|
130 | PSD_GET_NUM_OF_PROCS - has 2 CPU |
---|
131 | ProcInit CPU0 |
---|
132 | LApic ID:0x0: ver 0x80050010 |
---|
133 | Max LVT=6 |
---|
134 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
135 | Status Evaluate Processor 0x0 AE_OK |
---|
136 | Usable:2 Counter:0 |
---|
137 | CPU id to N:0 |
---|
138 | ProcId: 0x1 |
---|
139 | P_BLK: 0x810 |
---|
140 | P_BLK len: 0x6 |
---|
141 | CPU0 Status Evaluate _PCT 0x0 AE_OK |
---|
142 | Perf control: 0x0 |
---|
143 | Perf status: 0x0 |
---|
144 | End init CPU0 rc:0 |
---|
145 | StartProcessor: CPU1 id 2 |
---|
146 | StartProcessor: Warm Vector:18000004, BootCode.Lin:0xFFDED000, BootCode.Phys:0x6 |
---|
147 | 3000 |
---|
148 | StartProcessor 1 id:2 LAPICid:1 |
---|
149 | Wait INI App Proc |
---|
150 | Send SIPI1 |
---|
151 | StartProcessor success SIPI1 |
---|
152 | ProcInit CPU1 |
---|
153 | LApic ID:0x1000000: ver 0x80050010 |
---|
154 | Max LVT=6 |
---|
155 | End Startup code |
---|
156 | Set HLT duration as IOdelay:0x256 |
---|
157 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
158 | Status Evaluate Processor 0x0 AE_OK |
---|
159 | Usable:2 Counter:1 |
---|
160 | CPU id to N:1 |
---|
161 | ProcId: 0x2 |
---|
162 | P_BLK: 0x0 |
---|
163 | P_BLK len: 0x0 |
---|
164 | CPU1 Status Evaluate _PCT 0x0 AE_OK |
---|
165 | Perf control: 0x0 |
---|
166 | Perf status: 0x0 |
---|
167 | End init CPU1 rc:0 |
---|