ACPI v3.03 TrapE with SMP

[guest]

IBM ZPro 6221 gives TRAP E when WPS is starting and /SMP switch is present in config.sys. However, if system booted with acpi.psd and no /SMP option then boot is ok and power off works. System did work with 3.02 and SMP but would not complete power off. Acpi.log attached from 3.03 running single CPU.

[guest]

acpi.log

[guest]

Requested IBM506 log:

R1.8.1a

Daniela's Bus Master IDE Driver for OS/2 Version 1.8.1a

Controller:0 Port:01F0 IRQ:0E Status:OK BusMaster? Scatter/Gather?

Intel ICH4 PATA host (8086:24CB rev:02) on PCI 0:31.1#0

Unit:0 Status:OK SMS:16 LBA BusMaster? UltraDMA5/PIO4 BPB

Model:MAXTOR STM3320620A

OS2:log phys BPB/BIOS IDE:log phys Total Sectors

C 38913 65535 65535 16383 Avail 625142448 H 255 16 255 16 16 OS2 625137345 S 63 63 63 63 63 % Used 99.99

Controller:1 Port:0170 IRQ:0F Status:OK BusMaster? Scatter/Gather?

Intel ICH4 PATA host (8086:24CB rev:02) on PCI 0:31.1#1

Unit:0 Status:OK ATAPI BusMaster? UltraDMA2/PIO4

Model:DVDRW IDE 16X VER A091

[guest]

TRy again:

R1.8.1a     
            Daniela's Bus Master IDE Driver for OS/2 Version 1.8.1a
Controller:0  Port:01F0 IRQ:0E  Status:OK BusMaster Scatter/Gather
  Intel ICH4 PATA host (8086:24CB rev:02) on PCI 0:31.1#0
 Unit:0 Status:OK SMS:16 LBA BusMaster UltraDMA5/PIO4 BPB
  Model:MAXTOR STM3320620A    
   OS2:log   phys   BPB/BIOS   IDE:log   phys     Total Sectors
  C  38913  65535                65535  16383   Avail  625142448
  H    255     16        255        16     16   OS2    625137345
  S     63     63         63        63     63   % Used     99.99
Controller:1  Port:0170 IRQ:0F  Status:OK BusMaster Scatter/Gather
  Intel ICH4 PATA host (8086:24CB rev:02) on PCI 0:31.1#1
 Unit:0 Status:OK ATAPI BusMaster UltraDMA2/PIO4
  Model:DVDRW IDE 16X                           VER A091

rmview /irq output

RMVIEW: Physical view
  IRQ Level =  0  PCI Pin = NONE  Flg = EXCLUSIVE    TIMER_CH_0
  IRQ Level =  1  PCI Pin = NONE  Flg = EXCLUSIVE    KBD_0 Keyboard Controller
  IRQ Level =  2  PCI Pin = NONE  Flg = EXCLUSIVE    PIC_1
  IRQ Level =  3  PCI Pin = NONE  Flg = MULTIPLEXED  SERIAL_1  Serial Controller
  IRQ Level =  4  PCI Pin = NONE  Flg = MULTIPLEXED  SERIAL_0  Serial Controller
  IRQ Level =  5  PCI Pin = NONE  Flg = SHARED       Intel 82801DB-ICH4 with Analog Devices AD1885
  IRQ Level =  6  PCI Pin = NONE  Flg = MULTIPLEXED  FLOPPY_0 Floppy Controller
  IRQ Level =  8  PCI Pin = NONE  Flg = EXCLUSIVE    RTC
  IRQ Level =  9  PCI Pin = NONE  Flg = SHARED       ACPI Interface
  IRQ Level = 12  PCI Pin = NONE  Flg = EXCLUSIVE    AUX_0 PS/2 Auxiliary Device Controller
  IRQ Level = 14  PCI Pin = NONE  Flg = EXCLUSIVE    IDE_0 xATA Controller
  IRQ Level = 15  PCI Pin = NONE  Flg = EXCLUSIVE    IDE_1 xATA Controller

[greenemk]

Fixed version of acpi provided by Pasha on 20 Oct 07 fixes all problems.

[eco]

User confirmed that the problem is resolved. Wait for public release of ACPI 3.05.