PowerOff, ASUS M6800N notebook

[eco]

From: Hans v. Mangoldt

source: http://bugs.ecomstation.nl/view.php?id=678#5768

The battery state is now displayed correctly with ACPI 3.09 or 3.11 installed. Unfortunatley shutdown with power off is not working any more. The installed eCS is still on level 1.2, so I only tried power off via APM and could not try the eCenter power off via ACPI.

[eco]

e-co:

Please try tests: http://ecomstation.ru/projects/acpitools/?action=faq -> Shutdown via ACPI

[eco]

thank you for your quick answer. I testet shutdown via PowerOff?.exe. This works as expected (switches off after about 3 seconds). Can I use ACPI PowerOff? with eCS 1.2? APM shutdown with power off workes fine with only apm.sys installed - so without ACPI.

[pasha]

check in config.sys: rem apm.sys basedev=apm.add

check , that AcpiDaemon? is running.

Then object Power -> PowerOff?

[Jack]

apm.add is the second entry in config.sys after acpi.psd, both without parameters. APM.SYS is commented out (with rem). ACPIDaemon.exe is started with an entry in config.sys (RUN=X:\OS2\AcpiDaemon?.exe) - I tried two in the autostart folder. PowerOff? (german "Ausschalten") in Power object (german "Energie") settings menu does nothing (nothing happens if you select the menu entry - with only apm.sys loaded it shuts down and does power off). When I try PowerOff? via Desktop, RMB, shutdown and use the eStylerLite option "PowerOff?" ("Abschalten"), eCS 1.2 shuts down but does not power off. If you switch off the notebook then the filesystems are dirty. If you restart the notebook via ctrl-alt-del after it hangs at the end off shut down with power off it restarts well and the filesystems are clean.

[pasha]

I installed german version of Power object. PowerOff? in this menu has 4 letter and I see as "Sluk"

[Jack]

I hope we are both talking about the "Battery" icon which in german is called "Energie" and afaik in english "Power". The ninth option in the 12 options menu is "Ausschalten".

[pasha]

Hmm, I have 13 options, PowerOff? is 9. Check pls property, second entry in main menu. Must set - APM BIOS and OS/2 support enabled

[Jack]

OK, I was not able to count. Yes, it's 13 options. But yes, too, APM BIOS and OS/2 support was and is enabled. I did not change this from the eCS 1.2 installation I am using for some time now. I only added ACPI.PSD and APM.ADD to config.sys

[pasha]

Check pls, that APMDAEMN.EXE or gsvdaemn.exe absent in config.sys (usially RUN=). Before PowerOff? check "APM BIOS and OS/2 support enabled". Some application can do turnoff APM support.

[Jack]

APMDAEMN.EXE is remmed out, GSVDAEMN.EXE was never used. Before PowerOff? I checked several times that "APM BIOS and OS/2 support enabled" is marked, and now tried it again. There is no change. The notebook does not PowerOff? with ACPI.PSD only without and with APM.SYS loaded.

[pasha]

Can you attach AcpiDaemon?.log ?