Thinkpad T42, check my logs

[eco]

e-co:

OK, let's take IBM Thinkpad T42, BIOS version: 3.13 (1RETDHWW) (hehe) BIOS Date: 2004-10-29, Embedded controller version: 3.04

ACPI 3.9 (eCS 2.0 RC5) -- seems OK

ACPI 3.11:

​http://ecomstation.ru/projects/acpitools/logs/20081123-T42-acpi.log

acpi daemon is booted I can boot, i see battery, temperature

!!! RESOURCE.SYS original, not patched by Roderick

ACPI 3.11+

​http://ecomstation.ru/projects/acpitools/logs/20081123-T42-acpi-b1.log ​http://ecomstation.ru/projects/acpitools/logs/20081123-T42-acpi-b2.log

acpi daemon is booted I can boot, i see battery, temperature

[eco]

e-co:

eCS 2.0 RC5 => UNI kernel

[eco]

ops,

W4 kernel ??

1) OK, testing new version (2008/11/25)

​http://ecomstation.ru/projects/acpitools/logs/20081125-acpi-b1.log

2) What to do with IRQ11?

​http://ecomstation.ru/projects/acpitools/logs/20081125-rmview.log

[pasha]

You have:

0: 'LNKA' (F99F4868) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 2:1.0 2:0.0 1:0.0 0:29.0 1: 'LNKD' (F99F4F40) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.1 2: 'LNKC' (F99F4CF8) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 2:2.0 0:31.1 0:29.2 3: 'LNKH' (F99F5860) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.7 4: 'LNKB' (F99F4AB0) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 2:0.1 0:31.6 0:31.5 0:31.3

Next step, use LINK LNKx xx and try boot.

[eco]

let's test ACPI 3.13

Thinkpad T42 - one CPU

i have settings (don't know why this values)

LINK LNKA 10

LINK LNKB 6

1) visual defect during boot: hanging on SNAP.. waiting 1-2 mintues

2) acpi3.log

no delays on boot

3) acpi4.log

pause on PMSHELL.EXE .. 5 minutes..

Conclusion: there are problems on boot.

[eco]

e-co:

now loading acpi daemon from startup.cmd => no problems with PMSHELL, SNAP..

the notebook boots fast without any delays. tested 5 times.

[eco]

BIOS Setup

BIOS version: 3.13 (1RETDHWW) BIOS Date: 2004-10-29 Embedded controller version: 3.04 Memory: 1024 Mb

/Network\ All Enabled

/Serial port:\ disabled

/Infrared:\ enabled 2F8, IRQ3, DMA3

Parallel: enabled, 3BC, IRQ7

/PCI\ INTA .. INTH all IRQ 11

/USB\ enabled

/Power\ Power mode for AC = Maximum Performance Power mode for battery = Maximum Battery Life Customize ... Hibernate = disabled Timer wakeup with Battery operation = disabled Low battery action = Suspend Suspend when LCD is closed = No suspend

..

Intel Speedstep = Enabled

Mode for AC = Automatic Mode for Battery = Battery optimized

[eco]

Testing ACPI 3.14

the notebook boots ok, pci, usb are working

two logs attached: W4 kernel + SMP kernel

[eco]

TP42, W4

[eco]

T42, SMP kernel

[eco]

Ops, there are troubles with Interrupts, look at the screenshot and the logs

[eco]

​http://ecomstation.ru/projects/acpitools/pic/tp42-irq.jpg

I add info for users:

​http://ecomstation.ru/projects/acpitools/?action=certificate

-> CERT-J

[eco]

Logs without Uniaud loaded

acpi6a.log and acpi6b.log

[eco]

Pasha talks that this messages are not important:

AcpiWaitOBF rc=640 OBF:1 Interrupt NOT Handled!!!!

[eco]

There are red splashes in eCenter CPU pulse sometimes, let's look at irqstat output?

[eco]

e-co:

if boot without ACPI then the same picture:

​http://ecomstation.ru/projects/acpitools/pic/tp42-irq.jpg

so.. this doesn't depend on ACPI..