Opened 17 years ago
Closed 16 years ago
#58 closed defect (wontfix)
Thinkpad r40e, unusable if boot with ACPI.PSD (ACPI 3.04)
Reported by: | Peter | Owned by: | pasha |
---|---|---|---|
Priority: | major | Milestone: | |
Component: | ACPI PSD | Version: | 3.05 |
Keywords: | Cc: |
Description
ACPI V3.01 and V3.02, system slows down so much that keyboard keys are missed
Description: I use a Thinkpad r40e. ACPI V3.01 does not shutdown the laptop I tried V3.02, but never did have the opportunity to try shutdown. The whole pc is massively slowed down. Mouse moves, and keystrokes are missed, the system is very unresponsive. Removing ACPI V3.xx fixes slowdown. The slowdowns are not consistent, only about once every 20 secs.
ACPI V2.13 and APM.add V1.06 work with this laptop with no major issues to report.
I suspect that this problem might be affecting netwk apps too.
Attachments (12)
Change History (49)
comment:1 follow-ups: 2 3 Changed 17 years ago by
Owner: | changed from pasha to anonymous |
---|---|
Status: | new → assigned |
comment:2 Changed 17 years ago by
Replying to pasha:
Do "copy acpica$ acpi.log" and attach here pls
Later, a re-install with new cvs is required first - this will take a little time.
Changed 17 years ago by
Attachment: | ACPILOG.zip added |
---|
comment:3 Changed 17 years ago by
comment:4 Changed 17 years ago by
Need:
- Iasl.exe -d
Then ou can see created files. File with .dsl attached here.
Changed 17 years ago by
Attachment: | acpilog304_58.zip added |
---|
logs of acpi 3.04 (on eCS 2.0 rc2 !_not rc3_!)
comment:5 Changed 17 years ago by
Owner: | changed from anonymous to maulman |
---|---|
Status: | assigned → new |
Summary: | Thinkpad r40e, unusable if boot with ACPI.PSD → Thinkpad r40e, unusable if boot with ACPI.PSD (ACPI 3.04) |
Sorry Pasha,
I somehow lost your email asking for further information. I have installed ACPI 3.04 on my eCSV2.0 rc2 installation, and I did not want install rc3.
Anyway, I hope this gives you the information you require. V 3.04 is much better than V3.03, but when typing sometimes characters are missing (interrupt problem ?), this gets worse over time.
comment:7 Changed 17 years ago by
Replying to pasha:
Do battery show correct? In AC and in battery power.
Yes, everything works. Battery Power takes >60 seconds to open. Other Apps are slow to open. Boot times are long. Text edit is impossible, characters are lost.
comment:8 follow-up: 9 Changed 16 years ago by
Owner: | changed from maulman to pasha |
---|---|
Status: | new → assigned |
Success working T40 has:
psd=acpi.psd /EIS /VBE
and in acpi.cfg:
LINK LNKA 10
LINK LNKH 6
Note: Here was removed uhci drivers for success suspend/resume S3.
comment:9 Changed 16 years ago by
Replying to pasha:
Success working T40 has:
psd=acpi.psd /EIS /VBE
and in acpi.cfg:
LINK LNKA 10
LINK LNKH 6
Note: Here was removed uhci drivers for success suspend/resume S3.
Hi Pasha,
Sorry, r40e is not like T40.
Changes crash this PC.
comment:10 follow-up: 11 Changed 16 years ago by
You have many devices using 1 IRQ - IRQ11, for each link you can choice from 3, 4, 6, 7, 10, 11. Also, don't use IRQ for ISA device. For example, if you have com1 - don't use IRQ4, if have LPT1 - don't use IRQ7, if have FDD - don't use IRQ6. You havelinks for setting:
LNKA
LNKB
LNKG
LNKI
LNKH
All this link use IRQ11 in share mode. It is bad, so part from this link need remove to any IRQ from possible.
comment:11 Changed 16 years ago by
Replying to pasha:
You have many devices using 1 IRQ - IRQ11, for each link you can choice from 3, 4, 6, 7, 10, 11. Also, don't use IRQ for ISA device. For example, if you have com1 - don't use IRQ4, if have LPT1 - don't use IRQ7, if have FDD - don't use IRQ6. You havelinks for setting:
LNKA
LNKB
LNKG
LNKI
LNKH
All this link use IRQ11 in share mode. It is bad, so part from this link need remove to any IRQ from possible.
Intersting. Some people at Warpstock complained that ACPI was putting all irq's on 11.
What does LINKxxx mean? What is a link. Why does ACPI not set this automatically?
comment:12 follow-up: 13 Changed 16 years ago by
I say, if you set in ACPI.CFG
LINK name newirqnumber
Then acpi try change IRQ for all device, which are controlled by this link. ACPI only set all, that has your ACPI table. Auto route balancing don't do, because many manafacters don't do full check own ACPI table. So can be problem with LINK. One of problem you see.LINK LNKH 6 crashed your PC.
comment:13 Changed 16 years ago by
Replying to pasha:
I say, if you set in ACPI.CFG
LINK name newirqnumber
Then acpi try change IRQ for all device, which are controlled by this link. ACPI only set all, that has your ACPI table. Auto route balancing don't do, because many manafacters don't do full check own ACPI table. So can be problem with LINK. One of problem you see.LINK LNKH 6 crashed your PC.
Ok, adjusted all links until irq conflict gone. PC still works, net access ok. added apm.add The bug is the same as before. No change!
comment:14 follow-up: 15 Changed 16 years ago by
Attach current log (after your IRQ resolving) and say email where I can send version for test.
comment:15 Changed 16 years ago by
Replying to pasha:
Attach current log (after your IRQ resolving) and say email where I can send version for test.
irq 11 has 2 devices attached. broadcom device to another irq stops mpts, apm.add still slows system
REM BASEDEV=APM.ADD fixes bug, 'E3' in eCenter, no power off
acpi.cfg
;============================================================================ ; LINK LNKF 14 ;;LINK LNKB 0xA ; r40e settings below ;vga display - moved LINK LNKA 10 ;PC Card CardBus? Controller - moved LINK LNKB 8 ;broadcom lan0, cannot move, mpts fails ;LINK LNKC 11 ;no idea... ;LINK LNKD ;no idea... ;LINK LNKE ;no idea... ;LINK LNKF ;Agere Systems AC'97 Modem - moved LINK LNKG 6 ;sound? breaks when moved ;LINK LNKH 9
other settings?
comment:16 follow-up: 17 Changed 16 years ago by
IRQ8 is absent in possible. Ok. What is a email for send test version?
comment:17 Changed 16 years ago by
Replying to pasha:
IRQ8 is absent in possible. Ok. What is a email for send test version?
I tried irq 6,7,9... also, no difference.
You can send info/test to peter at mensys dot nl (replace 'at' with @, 'dot' with .)
Thanks :)
Changed 16 years ago by
Attachment: | acpilog4.zip added |
---|
created with acpi-t code after 2mins use of PC
comment:18 follow-up: 19 Changed 16 years ago by
The problem is the same. Maybe not as bad as before.
acpilog3 created by startup.cmd
acpilog4 created after 2mins of using PC
comment:19 Changed 16 years ago by
Replying to maulman:
The problem is the same. Maybe not as bad as before. acpilog3 created by startup.cmd acpilog4 created after 2mins of using PC
Get acpi.psd from http (where you get acpi-t.zip), boot, then attach log
comment:20 Changed 16 years ago by
I typed some text in E editor
With apm.add
"This atst o see what is going on Thesystem seems terr unresponsive."
apm.add removed
"This is a test to see what is going on. The system seems terribly unresponsive"
comment:21 Changed 16 years ago by
At http://acpi.sourceforge.net/dsdt/view.php I see 2 ACPI table for IBM ThinkPad? R40e, can you try it?
This table can be use by acpi.cfg:
FILE name_file
name_file must be in \os2\boot directory
comment:22 Changed 16 years ago by
No change since first report 8 Nov 07
Bug is not fixed by:-
LINK statements
FILE statements
Test files
What now....
comment:23 Changed 16 years ago by
file_name mean, what you download table from sourceforge, place this file to \os2\boot and write to acpi.cfg FILE this_file_name, for exapmle, you donwload file with name R40e.aml, next you write FILE R40e.aml
comment:24 Changed 16 years ago by
Pasha this might help ? BIOS version ? Only did a quick google on this machine.
https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.15/+bug/18095
Roderick
comment:25 Changed 16 years ago by
Here is problem with embedded controller. Also I see error at ACPI init stage. Embedded controller work right, but don't generate interrupt, so we have wait and slow work. I try small change in embedded controller works - this don't help. So next step - change ACPI table. About BIOS I don't know, I have't TP R40e. This can be one of possible case, but note - this is dangerously case.
comment:26 Changed 16 years ago by
Neither file allows ACPI to start.
ERROR warning when booting.
My BIOS is 2.10 (in PCI.LOG)
Machine:
Type = 2684-QVG
Num = KBBV542 306
No bios info visible
comment:27 Changed 16 years ago by
ubuntu CD will not run on this machine
freebsd CD works perfect, including ACPI
comment:28 Changed 16 years ago by
Ok. I see. Linux man remove from your table all, that give error in compile. This is IRQ routing and embedded controller. I need some time for try compile your DSDT and resolve error.
BTW, Link LNKB 8 is not good idea, change or leave in 11
Changed 16 years ago by
comment:29 Changed 16 years ago by
Version: | 3.02 → 3.05 |
---|
Try use this table, you need write to acpi.cfg:
FILE dsdt.aml
File dsdt.aml copy to \os2\boot.
If boot, create acpi.log and attach here
comment:31 Changed 16 years ago by
Need GetTable? FACP and table.dat attach here. GetTable?.exe you can find in http://fortuna.odessa.ua:8080/GetTable.exe
comment:34 Changed 16 years ago by
Hi Pasha,
Updated bios to latest version 1.13 (year=2003) -> 1.38 (year=2005). No change.
comment:35 follow-up: 36 Changed 16 years ago by
Attach acpi.log pls after BIOS update, with comment FILE in acpi.cfg and output Iasl -d too
comment:36 Changed 16 years ago by
Replying to pasha:
Attach acpi.log pls after BIOS update, with comment FILE in acpi.cfg and output Iasl -d too
Sorry for the long delay.
Installed eCS rc4 after a major disk crash.
I cannot get APM.ADD to shut down PC anymore.
The bug is disabled if battery power monitor is not used.
ACPI will not work on this laptop.
I suggest you say r40e is not supported, and close this bug.
comment:37 Changed 16 years ago by
Resolution: | → wontfix |
---|---|
Status: | assigned → closed |
5 monthes.. The tester is tired, let's close the ticket.
We must support any Thinkpad http://ecomstation.ru/projects/ecspc/?action=notebook
Do "copy acpica$ acpi.log" and attach here pls