Ticket #197 (assigned defect)
no sound with via 82xx sound
| Reported by: | jz213 | Owned by: | dazarewicz |
|---|---|---|---|
| Priority: | normal | Milestone: | ALSA Hardware Compatibility |
| Component: | UNIAUD32 | Version: | 1.9.24 |
| Severity: | normal | Keywords: | no sound |
| Cc: |
Description
the uniaud driver loads properly and assigns the device to IRQ 0 when and only when I tell the bios there is not a plug and play os installed. when I do this there are no more problems until the system boots and there is no sound. I tried to update the hardware configuration through the ctrl+f1 menu but this did not change anything. I have made sure the volume levels are up in unimix and still no sound.
Attachments
Change History
Changed 2 years ago by jz213
- Attachment Unknown-20110213-uniaud-1.9.24.zip added
comment:1 Changed 2 years ago by jz213
almost forgot: motherboard is from hp pavilion 523n FIC am35 w/ limited bios from hp (not the bios it would normally come with but a very limited version.
comment:3 Changed 2 years ago by jz213
I meant IRQ 10 in first post. when the bios is configured for to think plug and play is present, the IRQ is 0.
comment:4 Changed 2 years ago by dazarewicz
- Owner set to dazarewicz
- Status changed from new to assigned
There appears to be a problem setting up the interrupt correctly. The newer version 1.9.25 has a corrected interrupt setup algorithm. I suggest you try that driver and let me know how it works. If it still doesn't work, attach a new log.
this is the debug info log file from unilog.cmd