Ticket #22: Gigabyte_7IXE.txt

File Gigabyte_7IXE.txt, 12.8 KB (added by Doug Bissett, 12 years ago)
Line 
1Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
2Loaded Vendor Data : "This is version ha_merged, 11 Oct 2010 08:16:43"
3
4PCI BIOS Version 2.10 found!
5Number of PCI Busses : 2
6PCI Characteristics  : Config Mechanism 1
7
8Searching for PCI Devices using the OEMHLP$ driver
9
10 Bus 0 (PCI), Device Number 0, Device Function 0
11 Vendor 1022h Advanced Micro Devices [AMD]
12 Device 7006h AMD-751 [Irongate] System Controller
13 Command 0106h (Memory Access, BusMaster, System Errors)
14 Status 2210h (Has Capabilities List, Received Master Abort, Medium Timing)
15 Revision 25h, Header Type 80h, Bus Latency Timer 78h
16 Self test 00h (Self test not supported)
17 PCI Class Bridge, type PCI to HOST
18 Address 0 is a Memory Address (0-4GiB, Prefetchable) : E8000000h..EBFFFFFFh
19 Address 1 is a Memory Address (0-4GiB, Prefetchable) : EDDFF000h..EDDFFFFFh
20 Address 2 is an I/O Port : C800h..C803h
21 New Capabilities List Present:
22   AGP Capability, Version 1.0 (AGP 1x and/or 2x support)
23     AGP Speed(s) Supported : 1x 2x
24     FW Transfers Supported : No
25     >4GiB Address Space Supported : No
26     Sideband Addressing Supported : Yes
27     Maximum Command Queue Length : 16 bytes
28     AGP Speed Selected : 2x
29     FW Transfers Enabled : No
30     >4GiB Address Space Enabled : No
31     AGP Enabled : Yes
32     Sideband Addressing Enabled : Yes
33     Current Command Queue Length : 1 byte
34
35 Bus 0 (PCI), Device Number 1, Device Function 0
36 Vendor 1022h Advanced Micro Devices [AMD]
37 Device 7007h AMD-751 [Irongate] AGP Bridge
38 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
39 Status 0220h (Supports 66MHz, Medium Timing)
40 Revision 01h, Header Type 81h, Bus Latency Timer 78h
41 Self test 00h (Self test not supported)
42 PCI Class Bridge, type PCI to PCI
43 PCI Bridge Information:
44   Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
45   Secondary Bus Command 000Ah (CSERR forwarded, VGA mapping)
46   Secondary Bus Status  2220h (Supports 66MHz, Received Master Abort,
47     Medium Timing)
48   Secondary Bus Latency 20h
49   I/O Port Range Passed to Secondary Bus : 00008000h..00009FFFh (32-bit)
50   Memory   Range Passed to Secondary Bus : EDE00000h..EFEFFFFFh
51   Prefetchable Memory Range Passed to Secondary Bus : E5C00000h..E5CFFFFFh
52
53 Bus 0 (PCI), Device Number 7, Device Function 0
54 Vendor 1022h Advanced Micro Devices [AMD]
55 Device 7408h AMD-756 [Viper] ISA
56 Command 000Fh (I/O Access, Memory Access, BusMaster, Special Cycles)
57 Status 0200h (Medium Timing)
58 Revision 01h, Header Type 80h, Bus Latency Timer 00h
59 Self test 00h (Self test not supported)
60 PCI Class Bridge, type PCI to ISA
61
62 Bus 0 (PCI), Device Number 7, Device Function 1
63 Vendor 1022h Advanced Micro Devices [AMD]
64 Device 7409h AMD-756 [Viper] IDE
65 Command 0005h (I/O Access, BusMaster)
66 Status 0200h (Medium Timing)
67 Revision 07h, Header Type 00h, Bus Latency Timer 20h
68 Self test 00h (Self test not supported)
69 PCI Class Storage, type IDE (ATA)
70 PCI EIDE Controller Features :
71   BusMaster EIDE is supported
72   Primary   Channel is at I/O Port 01F0h and IRQ 14
73   Secondary Channel is at I/O Port 0170h and IRQ 15
74 Address 0 is not present or not configured!
75 Address 1 is not present or not configured!
76 Address 2 is not present or not configured!
77 Address 3 is not present or not configured!
78 Address 4 is an I/O Port : F000h..F007h
79
80 Bus 0 (PCI), Device Number 7, Device Function 3
81 Vendor 1022h Advanced Micro Devices [AMD]
82 Device 740Bh AMD-756 [Viper] ACPI
83 Command 0000h (Bus Access Disabled!!)
84 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
85 Revision 03h, Header Type 00h, Bus Latency Timer 78h
86 Self test 00h (Self test not supported)
87 PCI Class Bridge, type PCI to Other
88
89 Bus 0 (PCI), Device Number 7, Device Function 4
90 Vendor 1022h Advanced Micro Devices [AMD]
91 Device 740Ch AMD-756 [Viper] USB
92 Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Errors)
93 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
94 Revision 06h, Header Type 00h, Bus Latency Timer 10h
95 Minimum Bus Grant 00h, Maximum Bus Latency 50h
96 Self test 00h (Self test not supported)
97 Cache line size 32 Bytes (8 DWords)
98 PCI Class Serial, type USB (OHCI)
99 Address 0 is a Memory Address (0-4GiB) : EFFFB000h..EFFFBFFFh
100 System IRQ 12, INT# D
101
102 Bus 0 (PCI), Device Number 8, Device Function 0
103 Vendor 1000h LSI Logic / Symbios Logic
104 Device 000Fh 53c875
105 Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
106   System Errors)
107 Status 0210h (Has Capabilities List, Medium Timing)
108 Revision 26h, Header Type 00h, Bus Latency Timer 90h
109 Minimum Bus Grant 11h, Maximum Bus Latency 40h
110 Self test 00h (Self test not supported)
111 Cache line size 32 Bytes (8 DWords)
112 PCI Class Storage, type SCSI
113 Subsystem ID 39041DE1h DC390F/U Ultra Wide SCSI Adapter
114 Subsystem Vendor 1DE1h Tekram Technology Co.,Ltd.
115 Address 0 is an I/O Port : D000h..D0FFh
116 Address 1 is a Memory Address (0-4GiB) : EFFFFF00h..EFFFFFFFh
117 Address 2 is a Memory Address (0-4GiB) : EFFFE000h..EFFFEFFFh
118 System IRQ 10, INT# A
119 Expansion ROM of 64 KiB decoded by this card, currently disabled
120 New Capabilities List Present:
121   Power Management Capability, Version 1.0
122     Does not support low power State D1 or D2
123     Does not support PME# signalling
124     Current Power State : D0 (Device operational, no power saving)
125
126 Bus 0 (PCI), Device Number 9, Device Function 0
127 Vendor 1102h Creative Labs
128 Device 0002h SB Live! EMU10k1
129 Command 0105h (I/O Access, BusMaster, System Errors)
130 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
131   Medium Timing)
132 Revision 0Ah, Header Type 80h, Bus Latency Timer 40h
133 Minimum Bus Grant 02h, Maximum Bus Latency 14h
134 Self test 00h (Self test not supported)
135 PCI Class Multimedia, type Audio
136 Subsystem ID 80671102h SBLive! 5.1 eMicro 28028
137 Subsystem Vendor 1102h Creative Labs
138 Address 0 is an I/O Port : CC00h..CC1Fh
139 System IRQ 11, INT# A
140 New Capabilities List Present:
141   Power Management Capability, Version 1.0
142     Supports low power State D1
143     Supports low power State D2
144     Does not support PME# signalling
145     Current Power State : D0 (Device operational, no power saving)
146
147 Bus 0 (PCI), Device Number 9, Device Function 1
148 Vendor 1102h Creative Labs
149 Device 7002h SB Live! Game Port
150 Command 0105h (I/O Access, BusMaster, System Errors)
151 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
152   Medium Timing)
153 Revision 0Ah, Header Type 80h, Bus Latency Timer 40h
154 Self test 00h (Self test not supported)
155 PCI Class Input, type Other
156 Subsystem ID 00201102h Gameport Joystick
157 Subsystem Vendor 1102h Creative Labs
158 Address 0 is an I/O Port : DC00h..DC07h
159 New Capabilities List Present:
160   Power Management Capability, Version 1.0
161     Supports low power State D1
162     Supports low power State D2
163     Does not support PME# signalling
164     Current Power State : D0 (Device operational, no power saving)
165
166 Bus 0 (PCI), Device Number 10, Device Function 0
167 Vendor 1033h NEC Corporation
168 Device 0035h USB
169 Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Errors)
170 Status 0210h (Has Capabilities List, Medium Timing)
171 Revision 41h, Header Type 80h, Bus Latency Timer 40h
172 Minimum Bus Grant 01h, Maximum Bus Latency 2Ah
173 Self test 00h (Self test not supported)
174 Cache line size 32 Bytes (8 DWords)
175 PCI Class Serial, type USB (OHCI)
176 Subsystem ID 00011799h Root Hub
177 Subsystem Vendor 1799h Belkin
178 Address 0 is a Memory Address (0-4GiB) : EFFFC000h..EFFFCFFFh
179 System IRQ 9, INT# A
180 New Capabilities List Present:
181   Power Management Capability, Version 1.1
182     Supports low power State D1
183     Supports low power State D2
184     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
185     PME# signalling is currently disabled
186     3.3v AUX Current required : 0 mA (Self powered)
187     Current Power State : D0 (Device operational, no power saving)
188
189 Bus 0 (PCI), Device Number 10, Device Function 1
190 Vendor 1033h NEC Corporation
191 Device 0035h USB
192 Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Errors)
193 Status 0210h (Has Capabilities List, Medium Timing)
194 Revision 41h, Header Type 00h, Bus Latency Timer 40h
195 Minimum Bus Grant 01h, Maximum Bus Latency 2Ah
196 Self test 00h (Self test not supported)
197 Cache line size 32 Bytes (8 DWords)
198 PCI Class Serial, type USB (OHCI)
199 Subsystem ID 00011799h Root Hub
200 Subsystem Vendor 1799h Belkin
201 Address 0 is a Memory Address (0-4GiB) : EFFFD000h..EFFFDFFFh
202 System IRQ 12, INT# B
203 New Capabilities List Present:
204   Power Management Capability, Version 1.1
205     Supports low power State D1
206     Supports low power State D2
207     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
208     PME# signalling is currently disabled
209     3.3v AUX Current required : 0 mA (Self powered)
210     Current Power State : D0 (Device operational, no power saving)
211
212 Bus 0 (PCI), Device Number 10, Device Function 2
213 Vendor 1033h NEC Corporation
214 Device 00E0h USB 2.0
215 Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Errors)
216 Status 0210h (Has Capabilities List, Medium Timing)
217 Revision 02h, Header Type 00h, Bus Latency Timer 40h
218 Minimum Bus Grant 10h, Maximum Bus Latency 22h
219 Self test 00h (Self test not supported)
220 Cache line size 32 Bytes (8 DWords)
221 PCI Class Serial, type USB 2.0 (EHCI)
222 Subsystem ID 00021799h Root Hub
223 Subsystem Vendor 1799h Belkin
224 Address 0 is a Memory Address (0-4GiB) : EFFFFD00h..EFFFFDFFh
225 System IRQ 10, INT# C
226 New Capabilities List Present:
227   Power Management Capability, Version 1.1
228     Supports low power State D1
229     Supports low power State D2
230     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
231     PME# signalling is currently disabled
232     3.3v AUX Current required : 0 mA (Self powered)
233     Current Power State : D0 (Device operational, no power saving)
234
235 Bus 0 (PCI), Device Number 12, Device Function 0
236 Vendor 10ECh Realtek Semiconductor Co., Ltd.
237 Device 8139h RTL-8139/8139C/8139C+
238 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
239 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
240   Medium Timing)
241 Revision 10h, Header Type 00h, Bus Latency Timer 40h
242 Minimum Bus Grant 20h, Maximum Bus Latency 40h
243 Self test 00h (Self test not supported)
244 PCI Class Network, type Ethernet
245 Subsystem ID 813910ECh RT8139 (A/B/C/810x) Fast Ethernet Adapter (Generic ID)
246 Subsystem Vendor 10ECh Realtek Semiconductor Co., Ltd.
247 Address 0 is an I/O Port : D800h..D8FFh
248 Address 1 is a Memory Address (0-4GiB) : EFFFFE00h..EFFFFEFFh
249 System IRQ 10, INT# A
250 Expansion ROM of 64 KiB decoded by this card, currently disabled
251 New Capabilities List Present:
252   Power Management Capability, Version 1.1
253     Supports low power State D1
254     Supports low power State D2
255     Supports PME# signalling from mode(s) D1, D2, D3hot, D3cold
256     PME# signalling is currently disabled
257     3.3v AUX Current required : 375 mA
258     Current Power State : D0 (Device operational, no power saving)
259   Vital Product Data Capability
260     VPD Data not present
261
262 Bus 1 (AGP), Device Number 5, Device Function 0
263 Vendor 1002h ATI Technologies Inc
264 Device 4742h 3D Rage Pro AGP 1X/2X
265 Command 0087h (I/O Access, Memory Access, BusMaster, Wait Cycles)
266 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
267   Medium Timing)
268 Revision 5Ch, Header Type 00h, Bus Latency Timer 40h
269 Minimum Bus Grant 08h, Maximum Bus Latency 00h
270 Self test 00h (Self test not supported)
271 Cache line size 32 Bytes (8 DWords)
272 PCI Class Display, type VGA
273 Subsystem ID 00841002h Rage Pro Turbo AGP 2X
274 Subsystem Vendor 1002h ATI Technologies Inc
275 Address 0 is a Memory Address (0-4GiB) : EE000000h..EEFFFFFFh
276 Address 1 is an I/O Port : 9800h..98FFh
277 Address 2 is a Memory Address (0-4GiB) : EFEFF000h..EFEFFFFFh
278 System IRQ 11, INT# A
279 Expansion ROM of 128 KiB decoded by this card, currently disabled
280 New Capabilities List Present:
281   AGP Capability, Version 1.0 (AGP 1x and/or 2x support)
282     AGP Speed(s) Supported : 1x 2x
283     FW Transfers Supported : No
284     >4GiB Address Space Supported : No
285     Sideband Addressing Supported : Yes
286     Maximum Command Queue Length : 256 bytes
287     AGP Speed Selected : 2x
288     FW Transfers Enabled : No
289     >4GiB Address Space Enabled : No
290     AGP Enabled : Yes
291     Sideband Addressing Enabled : Yes
292     Current Command Queue Length : 1 byte
293
294ROM PCI IRQ routing table Tests....
295 ROM IRQ routing table found at F000h:7DC0h
296 Table Version 1.0 - OK
297 Table size 144 bytes - OK
298 Table Checksum F2h - OK
299 PCI Interrupt Router: AMD-756 [Viper] ACPI
300 IRQ's dedicated to PCI : None
301 The ROM PCI IRQ routing table appears to be OK.
302
303IRQ Summary: IRQs 9,10,11,12,14,15 are used by PCI devices
304Shared IRQs: IRQ 10 is shared by 3 PCI Devices
305             IRQ 11 is shared by 2 PCI Devices
306             IRQ 12 is shared by 2 PCI Devices